Error code 8E5E0147, impossible to get Windows Update to work

Similar Questions

• Impossible to get windows update to work

  always have the icon at the bottom of the right hand that says: "windows cannot check for updates...". It is vista home... I get 80070002 update error... I followed the steps to solve this problem, and still nothing... someone knows alternatives? summer in this way for a while

  Vista SP1 or SP2 installed?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  Have you tried to do a Reset? http://support.Microsoft.com/kb/971058

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• 57 a error code during the installation of Windows Update KB2598290

  Windows downloding this update, but allow to install this update

  57 a error code during the installation of Windows Update KB2598290

  Options-

  1. let your office product installation media in the drive and try to install the update.

  2. try manually download and install the update: http://www.microsoft.com/en-us/download/details.aspx?id=29770

  3. repair Office and try to install the update.
      http://support.Microsoft.com/kb/924614

• Error code 646 appeared during a windows update session

  Original title: error code 646

  error code 646 appeared during a windows update session. Any ideas what this is and how to fix it?
  Worcesterwoody

  Try this Fixit http://support.microsoft.com/kb/2258121

• Impossible to get windows update or microsoft update to work after the factory restore

  I just restored my computer laptop runnung xp sp2 to factory settings and now I cannont get windows update to function (0x8024400A error code) and I can not update microsoft to work (error code 0 x 80240036).  I can access the internet, navigate, dl files etc. just can't get windows updates.  I disabled the firewall and antivirus still cannot operate.  Tried to fix it, SP3, but must for this and I can't seem to install manually.  Any help would be appreciated.  Thank you

  Okay, roll up your sleeves! :-)

  (For best results, download all the Setup files below before you restore your computer to its factory settings. Files can be downloaded or copied to a USB flash drive).
  
  Preliminary work:

  Download the installation files (only if necessary!) SP2, SP3, IE8 and Avira Antivirus (beforehand). I prefer to keep these (and other useful files) on a USB key, but this is optional. Here are the links to all the installation of four files:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=28 (for SP2) (Note: you don't need to install SP2 if your home is already SP2 or SP1 even.)

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  (You can TOTALLY ignore the message "intended for it professionals"!)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  http://www.Avira.com/en/Avira-Free-Antivirus (for FREE of Avira version)

  1. physically disconnect from the Internet. Also unplug all unnecessary devices!

  2. turn your PC to its factory settings.

  3. remove the PC-Cillin was COMPLETELY (see above).

  4. temporarily disable the automatic updates. To do this:

  Start | Control Panel (switch to Classic view if not already selected). Automatic updates

  Select "Turn off automatic updates" and click OK.

  5 install SP2 (only if necessary!). Restart TWICE.

  6. install the SP3. Restart TWICE.

  6 switch to IE8. Restart TWICE.

  8. install anti-virus software.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  9 make sure that firewall Windows is activated (it should already be):

  Start | Control Panel | Security Center

  (Now you can physically reconnect to the Internet. Update Antivirus program.)

  10 visit Windows Update to download and install only the critical security updates. Restart each time you are prompted.

  11. reactivate the automatic updates.

• error code 57 when executing that Windows update

  I get the error code 57 and the 8024200d error code when you try to run Windows update

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-8024200d
  If you receive the Windows Update 8024200d error, it may mean that an update did not finish to download or install. The System Update Readiness Tool for Windows can correct some conditions that can cause this error.

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

  If it's office updates maybe try to install office with the installation media updates in the installation drive.

• Help with error Code 8024D00E! Improperly installed Windows Update?

  Update for Vista 64-bit Windows does not allow me to install the updates, and it does not seek to new updates. Error code 8024D00E keeps popping up, and without WU works correctly, I can't use my Zune software. Help?

  3-hours-late duplicate of http://answers.microsoft.com/thread/af5f3930-3814-48cc-bb3b-7cfcc6bc37b1

• Cannot get beyond error 0x8024D007 when trying to get Windows Update or Microsoft Update

  I tried to get the Windows Update and Microsoft Update on a Windows XP computer as well, but I got the error 0x8024D007 with both.  In view of this error message on your site, I did the registry fix and still no change.

  It took me awhile, but I found a solution that worked for me.

  1. Remove Service Pack 3 - if in Control Panel , you do not have an option delete, just Start, run and type: c:\windows\$NtServicePackUninstall$\spuninst\spuninst.exe

  After removing SP3 restart. Now, go to Windows Update and it should load fine. Go ahead and install high priority updates and reboot again.

  2. reinstall Service Pack 3 - it is better to just download the .exe for SP3 file and run it from the machine rather than using Windows Update to download and install. Before you try to run the .exe however, go ahead and avoid the "Access denied" error by typing this command in a command prompt window:

  secedit/configure /cfg %windir%\repair\secsetup.inf /db secsetup.sdb/verbose (Pay attention to the spaces)

  Now you can reinstall the SP3 and Windows Update should work again. If you get hooked to the last part of the installation which is "Scene cleanup", make sure that you have given him enough time to finish (a few hours) then simply open the the Task Manager and end of the process. Reboot, and you're good to go.

  * This fix also worked on a Server 2003 that had the same problem. Uninstalled and reinstalled SP2 using the same method. It is now up and running and pulling on the updates.

• Error code 8E5E0147 for installation of windows security updates

  Hello. I noticed that no new updates have been installed on my computer (with the exception of all updates for Windows Defender but also the recent Microsoft .NET Framework Service Pack 1 and the .NET Framework family updates). Everything else, like security updates, have failed since January 13, 2009. I saw someone else who has had this problem for 9 months. The error code is 8E5E0147. Wndows update download and try to install the updates. However, once completed, it says "failed". I worry because my computer is not updated for April fool virus. Can I get any help here? I heard people say that maybe I need to ask a Windows installation CD.

  Thank you, Martin. The thing is that my .NET and service packs would have to install. Don't forget that my problem was not downloaded from the update, but the installation. I think I found the answer. My Norton Internet security and Antivirus had expired. When I got Windows security updates, I had no program to receive these updates. I renewed my subscription, and everything worked. It has not been easy. However. I had to keep doing updates on Norton security until I received the message "no new updates were found" after that, I got all the new definitions and update of WIndows was allowed to install thanks to the new KB for your help.

• I get a 0xD0000006 error code when tring to use windows update

  I get a 0xD0000006 error Code when you use the default of windows update Setup

  d0000006

  Code: Error_Invalid_Handle - a possibility - bad hard drive

  Maybe a problem with a hard disk - important files may appear on the bad blocks.

  Try to run the "chkdsk/r" command at the command prompt

  You must open the command prompt by typing "cmd" in the start menu-> Run

  TaurArian [MVP] 2005-2010 - Update Services

• get the 641 and 80070641 error code during the installation of Windows updates

  Original title : not able to have windows updates installed on the pc have vista and get code error 641 and 80070641 - what it means and how can I solve this problem please?

  Not able to install updates windows for my pc with the vista system. I keep getting error 80070641 and 641 codes. What do these error codes mean and how can I fix updates can take place please?

  Hi bvwga,

   
  Thank you for updating the State of the question.

   

  What is the error message you get when installing these specific updates?

   
  Follow the steps mentioned below and check if that helps.
   
  Method 1:
  Follow the steps in the link and check if the problem persists:
  http://support.Microsoft.com/kb/822798
   
  Method 2:
  Download and install KB2598041 and KB2596871 manually from the following link and check if you are to install it:
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=29372
   
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=29362
   
  Method 3:
   
  You can try the suggestion mentioned in the following link:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/security-update-for-Microsoft-NET-Framework-4-on/b57fc365-1b9d-48D3-a0ca-5568b64b31ed
   
  Hope this information is useful.

• I get the error code 80070005 when you download Windows updates

  Original title : I use Windows 7, Vista Home Premium on a laptop. I can't download updates and get the error code 80070005

  When you try to update, I get the error code 80070005. System: 64-bit, service pack 2, M-6880 of Gateway computer memory 4.00 GB

  Hello

  1. what day you're talking about?

  2. don't you make changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  Step 1: Put the computer to boot.

  Click on the link below

  http://support.Microsoft.com/kb/929135

  NOTE: after you install the update properly, restore the computer to start as usual (see step 7 link mentioned above)

  Step 2: Download and install updates from Microsoft Download Center manually.

  a. visit the Microsoft Download Web site, type the number of "KB" in the search box and press ENTER.

  b. in the list of search results, click on the (KB) Knowledge Base article link to go to the download page. If there is more than one list, look for a link that goes to the Microsoft Download Center.

  c. If there are several versions on the download page, find the appropriate for your computer. Click on the download button and save the update to your desktop.

  d. When you are prompted, click open to install the update.

  Microsoft Download Center

  http://www.Microsoft.com/download/en/default.aspx

  Method 2:

  Run the Microsoft Fixit from the link below.

  http://support.Microsoft.com/mats/windows_update/

  Method 3:

  Reset components from Windows Update from the link below.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/971058

  Method 4:

  Follow the steps from the link below.

  http://support.Microsoft.com/kb/2509997

• Getting error code 2146827859 when you use Windows Update

  Running XP64 Pro.  Windows Update > Message that IE32 must be open > process then runs receive error box showing "error code 2146827859 reinstalled IE8 (64) - but this has not fixed an error message."

  Hello

  The equivalent of 2146827859 is 0x800A01AD error code.

  Perrform no the link mentioned below and see if it helps.

  You may receive an error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site

  Note: "Check the title that reads" 0x800A01AD error code '

  Hope this information helps.

• Error code 652 on Vista sp2 windows update

  I get repeated error codes 652 on my computer laptop sp2 from Vista when I try to update windows. Problem just started this week with KB2416473, an update of safety for microsoft.NET framework. I have Registry Easy and tried to scan and clean registry, but this did not help. Can someone help me?

  Please use the backups created by "Registry Easy" to restore the registry information that he deleted. And to see what the users of it have to say, please read their comments here -http://www.mywot.com/en/scorecard/registryeasy.com

  If you don't know how to modify the registry manually and then using a registry editor to do is similar to the delivery of a firearm loaded at a 4 year old child.
  Bad editing the registry by a registry to suspect "cleaner" can make the system unusable and cause a no start. Your only recourse at this point is a clean reinstall of Vista.

  1. download and Save the .NET Framework installation check tool
  2. read the Guide to the user on the page above and to check the installation of .NET Framework 3.5 SP1 by tool
  3. If it cannot be verified as being correctly installed, try to run a repair of programs and features.
  Locate the .NET Framework 3.5 SP1, click once to highlight, and then click the uninstall/change link and choose the repair option.
  4. If a repair operation has not resolved the improper installation of .NET Framework 3.5 SP1, then Uninstall it.
  5. download and Save full .NET Framework 3.5 SP1 package-
  http://download.Microsoft.com/download/2/0/e/20e90413-712f-438C-988e-fdaa79a8ac3d/dotnetfx35.exe
  6 configure Vista to the boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
  7 reboot the system for the State of clean boot and disconnect the internet connection system that's for now.
  8. run dotnetfx35.exe by right clicking it and choosing "run as Administrator". Accept the UAC prompt to allow it to run high.
  9. once .NET Framework 3.5 SP1 is installed, cancel the clean boot procedure, and then restart the system.
  10. once the system has recovered to the normal mode of Windows, reconnect the system to its internet connection.
  Allow all updates to install now.

  If do what above has not resolved the installation of KB2416473, then contact Microsoft for assistance in getting it installed.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Expert MowGreen Windows IT Pro - consumer safety

• Error code 643 trying to install Windows updates

  Initial problems of title-update

  I get a code of 643 error when trying to install windows updates.updates are not configured properly, go back to changes.and gets stuck on this page for hours

  Darlene

  See if this sugesstion can help you:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/4a6ea38b-9104-4547-8802-bc94bb6127a9 >

  UTC/GMT is 17:42 Monday, November 26, 2012