8287 error: manual/refresh operations with Where clause

Similar Questions

• Export (expdp) with where clause

  Hello gurus,
  
  I'm trying to export with where clause. I am getting error below.
  
  
  Here is my order of export.

  expdp "'/ as sysdba'" tables = USER1.TABLE1 directory=DATA_PUMP dumpfile=TABLE1.dmp logfile=TABLE1.log query= “USER1.TABLE1:where auditdate>'01-JAN-10'”

  Here is the error
  

  [keeth]DB1 /oracle/data_15/db1> DATA_PUMP dumpfile=TABLE1.dmp logfile=TABLE1.log query= USER1.TABLE1:where auditdate>'01-JAN-10'                    <
  
  Export: Release 11.2.0.3.0 - Production on Tue Mar 26 03:03:26 2013
  
  Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.
  
  Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  Starting "SYS"."SYS_EXPORT_TABLE_03":  "/******** AS SYSDBA" tables=USER1.TABLE1 directory=DATA_PUMP dumpfile=TABLE1.dmp logfile=TABLE1.log query= USER1.TABLE1:where auditdate
  Estimate in progress using BLOCKS method...
  Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
  Total estimation using BLOCKS method: 386 MB
  Processing object type TABLE_EXPORT/TABLE/TABLE
  Processing object type TABLE_EXPORT/TABLE/GRANT/OWNER_GRANT/OBJECT_GRANT
  Processing object type TABLE_EXPORT/TABLE/INDEX/INDEX
  Processing object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
  Processing object type TABLE_EXPORT/TABLE/TRIGGER
  Processing object type TABLE_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
  ORA-31693: Table data object "USER1"."TABLE1" failed to load/unload and is being skipped due to error:
  ORA-00933: SQL command not properly ended
  Master table "SYS"."SYS_EXPORT_TABLE_03" successfully loaded/unloaded
  ******************************************************************************
  Dump file set for SYS.SYS_EXPORT_TABLE_03 is:
    /oracle/data_15/db1/TABLE1.dmp
  Job "SYS"."SYS_EXPORT_TABLE_03" completed with 1 error(s) at 03:03:58

  Version
  

  SQL> select * from v$version;
  
  BANNER
  --------------------------------------------------------------------------------
  Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
  PL/SQL Release 11.2.0.3.0 - Production
  CORE    11.2.0.3.0      Production
  TNS for IBM/AIX RISC System/6000: Version 11.2.0.3.0 - Production
  NLSRTL Version 11.2.0.3.0 - Production

  Hello

  You must use the settings file. Another question, I see you are using 11g. Why don't you use a data pump.?
  Data pump is faster and has more features and that regular improvement imp and exp.

  You can do the following:

  sqlplus / as sysdba
  
  Create directory DPUMP_DIR3  for 'Type here your os path that you want to export to';
  

  then tap on a file:
  Touch par.txt

  In this file, type the following line the following:

  tables=schema.table_name
  dumpfile=yourdump.dmp
  DIRECTORY=DPUMP_DIR3
  logfile=Your_logfile.log
  QUERY =abs.texp:"where hiredate>'01-JAN-13' "
  

  then proceed as follows
  expdp username/password name parfile = 'par.txt'

  You will import to Oracle 11 g to 10g version should add 'version = 10' parameter in the above setting file

  BR
  Mohamed enry
  http://mohamedelazab.blogspot.com/

• Case with where clause - ORA-00920: invalid relational operator

  Hi all, when I try to run the following query, I get the following error...

  ORA-00920: invalid relational operator

  00920 00000 - "invalid relational operator.

  * Cause:

  * Action:

  Error on line: column 16: 5

  Anyone know what the problem with my request? Thanks in advance.

  SELECT concat (year, period)

  OF DD_ACTUALS_FACT

  CASE WHERE period

  WHEN 'JAN' THEN '01'

  WHEN 'FEB' THEN '02'

  WHEN 'MAR' THEN ' 03 "

  WHEN "APR" THEN ' 04 "

  WHEN 'CAN' THEN ' 05 "

  WHEN "JUN" THEN '06'

  WHEN 'JUL' THEN '07'

  WHEN 'AUG' THEN '08'

  WHEN 'MS' THEN '09'

  WHEN 'OCT' THEN '10'

  WHEN 'NOV' THEN '11'

  WHEN 'DEC' THEN '12'

  END as number 'months '.

  ORDER OF CONCAT (year, number 'months') / / DESC

  The problem is the number 'month' - you cannot give an "ACE" alias for an expression in a where clause clause.

  You have not really given any condition, that a set of translations of period in a number.

  Also, you didn't say what you're trying to do.

  Maybe you want to:

  SELECT concat (year, period)

  OF DD_ACTUALS_FACT

  WHERE something

  ORDER OF CONCAT (year, period of the CASE

  WHEN 'JAN' THEN '01'

  WHEN 'FEB' THEN '02'

  WHEN 'MAR' THEN ' 03 "

  WHEN "APR" THEN ' 04 "

  WHEN 'CAN' THEN ' 05 "

  WHEN "JUN" THEN '06'

  WHEN 'JUL' THEN '07'

  WHEN 'AUG' THEN '08'

  WHEN 'MS' THEN '09'

  WHEN 'OCT' THEN '10'

  WHEN 'NOV' THEN '11'

  WHEN 'DEC' THEN '12'

  END DESC)

  /

• Help with Where clause

  Hello world

  I have an argument to function entry, lets call this file number. This argument can be 0 (zero) or any number like 9800. No negative number.

  My where clause, I would like to say, if the number is 0 (zero), then extract all the cases, otherwise just retrieve the lines/records that belong to the passed in file number.

  select * 
  from table1
  where case_num = (if case num is 0 then retrieve all cases, 
                  otherwise retrieve only the records that belong to the number passed in)
  

  Thanks in advance.

  Select *.

  FROM table1

  where case_num = num

  or num = 0;

  SY.

• Need help with where clause

  Hi all
  
  Could someone please help me on this one where clause.
  The structure of the table like this:
  
  < code >
  create table (test)
  primary key ID number,
  TYPE_ID number not null,
  name varchar2 (10));
  
  insert into test values (1, 10, 'name 1');
  insert into test values (2, 10, 'name 2');
  insert into test values (3, 20, 'name 3');
  insert into test values (4, 20, 'name 4');
  insert into test values (5, 20, 'name 5');
  insert into test values (6, 10, 'name 6');
  insert into test values (7, 10, 'name 7');
  commit;
  
  SQL * more > select * from test;
  
  TYPE_ID ID NAMES
  ---------- ---------- ----------
  1 10 name 1
  2 10 2 name
  3 20 name 3
  4 20 4 name
  5 20 5 name
  6 10 6 name
  7 10 7 name
  
  7 selected lines.
  < code >
  
  Here are the values of the drop-down list box which the user will be able to select
  0 all the project
  Type of project 10 10
  20 of the Type 20
  
  Based on the selection of the user, we need a SELECT to get all records or certain types of records.
  
  Thanks in advance!

  Hello

  If: selected_type_ID is the value in the drop-down list (0, 10, or 20), then:

  WHERE   :selected_type_id IN (test.type_id, 0)
  

  This assumes that test.type_id is never NULL.

• ORA-01427 with WHERE clause and CASE statement

  Hi guys,.
  I get the error ORA-01427 when you try to select * from my dimension table
  When the parameter: P_HZA is 4. I used the keyword IN but the error still appears.
  no idea why?
  
  Select * from testtab
  where mycar = 4
  and "coretable". "" HZA ' IN
  CASE
  When: P_HZA = "4" then (button SELECTION OF DIM_HZA)
  other: P_HZA
  END
  
  Thank you

  you missed table_name and also this can cause several error so lines (ORA-01427: einreihig subquery returns more than one line)

  SELECT *
    FROM tableA
   WHERE mycar = 4
         AND "coretable"."HZA" IN
                CASE
                   WHEN :P_HZA = '4' THEN (SELECT key FROM DIM_HZA)   ---- may be you need to have max  to get only one value
                   ELSE :P_HZA
                END
  

  See you soon,.
  Manik.

• operator case where clause date comparison

  Hi can please help for query teas comparsion date based on requirements is

  I could use decode in the application to manage the two scenarios (decode orig enrl

  to date, if < = 12/01/15 then use 1/12/15 + 25 as the date for comparison, otherwise use

  date enrl orig + 25

  can u help for these

  tried to decode also

  / * AND

  To_date (get_attr_usage_val (7599,docr.org_prog_cam_recipient_id),'MM/DD/YYYY') < =)

  Decode (to_date('01/12/2015','MM/DD/YYYY'),

  TO_DATE (JANUARY 12, 2015 "," MM/DD/YYYY "") + 25,.

  To_date (get_attr_usage_val (7599,docr.org_prog_cam_recipient_id),'MM/DD/YYYY'))

  */

  Sorry for the delay to ask, thank you very much for the reply

  in above query

  It's feature column used to join date: (trunc (sysdate) - TO_DATE (get_attr_usage_val (7599,docr.org_prog_cam_recipient_id),'MM/DD/YYYY')))

  AND if (trunc (sysdate) - TO_DATE (get_attr_usage_val (7599,docr.org_prog_cam_recipient_id),'MM/DD/YYYY')))<= to_date('01/12/2015','mm/dd/yyyy')="">

  TO_DATE (JANUARY 12, 2015 "," MM/DD/YYYY "") + 25

  another (trunc (sysdate) - TO_DATE (get_attr_usage_val (7599,docr.org_prog_cam_recipient_id),'MM/DD/YYYY'))+25

  end if

  for example: 1) the enrollmentdate value function

  (1) If a patient registered on 01/04/2015 then wait 25 days from 12/01/2015 which 06/02/2015 before creating the event would provide that all other conditions are met.

  (2) If a registered on 13/01/2015 patient can expect 25 days from the date of registration which would be 07/02/2015 before creating the event provided that all other conditions are met

  AND ((TO_DATE (get_attr_usage (7599,docr.org_prog_cam),'MM/DD/YYYY'))))<=TO_DATE('01>

  AND

  To_date (get_attr_usage (7599,docr.org_prog_cam),'MM/DD/YYYY'))<=>

  )

  or

  (TO_DATE (get_attr_usage (7599,docr.org_prog_cam),'MM/DD/YYYY')>TO_DATE('01/12/15','MM/DD/YYYY')))

  AND

  To_date (get_attr_usage (7599,docr.org_prog_cam),'MM/DD/YYYY')+25 > trunc (sysdate)))

  ) )

  Thank you

• case of condition in where clause

  Hello
  
  I am a beginner in SQL, but according to my reading of the manual, this syntax should be acceptable. I'm using application express but tested also in Developer SQL and the conclusion that it fails with an error "invalid relational operator", with the line number pointing to the ELSE clause of the condition, but a number of column pointing to white space.
  
  This is a select statement nested, but that shouldn't matter. The fragment in question is:
  
  Select columns
  RES
  where res.villaid =: P605_VILLAID
  and INSTR (: P604_RES_STATES, res.states). = 0
  and (CASE: P604_EXCLUDE_ZERO)
  WHEN 'Y' THEN ' res.rate > 0'
  ELSE ' res.rate > = 0'
  END)
  and res. DEPARTDATE >: P605_STARTDATE
  and res. ARRIVEDATE < =: P605_ENDDATE.
  
  I hope that this puts ok shaped during the validation. The code is looking for bookings within a range of dates (which works very well when the other conditions are discussed), and should only output offset lines (nights) if the user asks for it in the variable of liaison P604_EXCLUDE_ZERO. There are probably other ways to go about this, but I'm too stubborn to renounce it. Well, not yet anyway.
  
  Thanks and greetings
  CS

  select some columns
    from res
   where res.villaid = :p605_villaid
         and instr (:p604_res_states, res.states) != 0
         and sign (res.rate) >= case when :p604_exclude_zero = 'Y' then 1 else 0 end
         and res.departdate > :p605_startdate
         and res.arrivedate <= :p605_enddate
  

• By using a WHERE clause in the tree APEX

  Hi all -

  I have a hierarchical SQL query that I display as a tree of the APEX.

  Here is my sample application:

  https://Apex.Oracle.com/pls/Apex/f?p=32581:29

  Login: guest

  PW: app_1000

  workspace: leppard

  I try to add a WHERE clause so that only nodes with the lowest-level children are displayed, i.e. something like "WHERE connect_by_isleaf = 0 OR level = 5'"

  The tree of query with where clause works very well in the SQL command window, but when I add the WHERE clause to my tree apex page no longer displays anything. Is this a problem with APEX or y at - it another way to filter my results?

  Thanks in advance for your suggestions,

  John

  Connect occurs in the first place, the where the provision is applied to these results, effectively cutting in the hierarchical structure. Since the apex has build a hierarchical structure of the query, it relies on the virtual level, which is butchered by applying the where clause. It's a miracle that you're not even receive errors because I expect almost an incorrect json array was built. With no top-level from and only level 5 or end nodes, there is no structure to present: the two apex cannot set a correct representation and not jstree neither. In your request, you will see your "root nodes", but it is not representable.

  I don't know why you want to present it in a tree? Levels both connect_by_is_leaf = 5 will give you everything just a list of nodes without any hierarchical structure.

  The best thing to do is to use a subquery to limit first your dataset and then use it for the basic tree query, this way you violate one of these vital columns.

  For example if you want only nodes and their immediate parent, you can opt for something like this (fast on some testdata model):

  with dataset as (
  select node_id, parent_id
     from treedata
    where connect_by_isleaf = 0
  connect by prior node_id = parent_id
    start with parent_id = 0
  ),
  dataset2 as (
  select node_id, parent_id
    from dataset
  union all
  select node_id, null parent_id
    from treedata
  where node_id in (select parent_id from dataset)
  )
  select level, node_id
     from dataset2
  connect by prior node_id = parent_id
    start with parent_id is null
  

• Can I use truncated and where clause in the statement even?

  Hello guys,.
  
  Can I use truncated with where clause in the same statement.
  
  
  For ex:
  
  TRUNCATE TABLE my_table WHERE id < 500;
  
  If not, that you recommend me to overtemperature to the level of high water line?
  
  
  By the way
  

  select * from v$version;

  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
  PL/SQL Release 11.2.0.1.0 - Production
  "CORE 11.2.0.1.0 Production."
  AMT for 64-bit Windows: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production
  >
  
  Thank you very much.
  
  Published by: 970992 on 11:14 13.Ara.2012

  >
  Okay I need an increasing amount of space. However, at the same time I want to recover the spaces empty below HWM. So, I need to use less amount of space I am inserting. Therefore, shouldn't use retractable for this?
  >
  Why waste the effort. Oracle will reuse the space below the HWM when doing inserts. You already said that you insert more lines you delete so all these will be more accustomed to the top.

  The only time where that oracle may not use space is when the space is too small to be useful. It is documented in the doc, I told you
  >
  Understanding recoverable unused space
  Over time, Update, and Delete on objects within a tablespace can create pockets of empty space that individually are not large enough to be reused for the new data.
  >
  Most uses of CONTRACTION I've seen are totally useless. If you follow the doc and run the Advisor of segment it will tell you if there is space that can be retrieved and how much. But, even once, for your use even if case will get you will Oracle while you need to reassign the new extensions, then the HWM will just go still higher.

  If pay you a heavy price in Oracle did a full table scan, update of many blocks from the table, update THE index, impact performance for other users to access the table during the SHRINK and reallocate extensions (maybe even some of the same areas) when you insert more data.

  Do not SHRINK unless you know it's necessary.

• Materialized view does not quickly refresh with sysdate in where clause

  Hi all

  I am trying to create a view, materialized with sysdate in where clause. This makes the complex query, and so I can't create a quick refreshment mview.

  I tried to create with rowid too, but it does not create a quick refreshment.

  I was wondering if someone can advise me, how can I accomplish this task, which would be really appreciated.

  The query is:

  create a materialized view PS_MEETING

  build the DEFERRED payment

  Refresh quickly with rowid

  as

  SELECT *.

  MEETING M

  WHERE state_desc = 'VIC '.

  OR Meet_date < TRUNC (SYSDATE);

  the behavior is documented: http://docs.oracle.com/cd/E11882_01/server.112/e25554/basicmv.htm#DWHSG8201

  General restrictions on update quickly

  The definition of the materialized view query is limited as follows:

  • The materialized view must not contain references to non-repetitive phrases such as SYSDATE and ROWNUM .

  So I guess that you would need a more static than sysdate condition - or another strategy update.

• Binds a parameter in WHERE clause throws error (ORA-00920)

  Good day to you all.  Hope everything goes well.

  Ok.  Here's the deal.  I am trying to bind a parameter in a where clause clause, but I continue to get the error invalid relational operator (ORA-00920).  It seems as if Oracle is looking for a correct syntax before you pass the variable (bind value).

  For example:

  SELECT LAST_NAME, FIRST_NAME FROM MYTABLE
  WHERE OBSOLETE IS NULL
  and :P_MY_BIND_VALUE
  

  What is the right way to get around this?

  Thanks for all your help!

  AquaNX4 wrote:

  Thank you for the reply.

  I use simple SQL.  The variable binding will be used in the APEX and an item that is based on a LOV with where condition stored there.  Make sense?

  Logic you want... doesn't have a sense of how you try to do.

  Bind variables are for the passage of the 'values' to a question, only not for the passage of the SQL statements or sections of objects such as the names of tables etc.  It is not a substitution string such as the use of '&' in SQL * more and should not be treated this way.

  If you could provide more details on exactly what you're trying to do (some data would help) then perhaps we could tell how best to go about this.

• T/t with the WHERE clause using a list breaks

  Hello, all,.

  I have a project where I need to use a list as part of the WHERE clause for a t/t, and it is breaking.  I don't know what I'm doing wrong.

  For some pseudo-code, do I have a complete query of a database called 'people '.  A list of values for the t/t with the first query; the second query is my t/t:

  <cfquery name="getDIR" datasource="#request.THISDSN#">
      SELECT thisName dir FROM orgs WHERE thisID in (<cfqueryparam value="#form.org#" cfsqltype="cf_sql_varchar" list="yes" />)
  </cfquery>
  
  <cfquery name="people" database="people">
      SELECT colA, colB, colC, colD
      FROM people
      WHERE 1=1
          AND (
              div IN (<cfqueryparam value="#valueList(getDIR.dir)#" cfsqltype="varchar" list="yes" />)
              OR dir IN (<cfqueryparam value="#valueList(getDIR.dir)#" cfsqltype="varchar" list="yes" />)
              )
  </cfquery>
  
  
  

  I get the error message is "t/t syntax error: encountered" div IN \'thisValue\' ".»  Incorrect conditional expression, waiting for one of [as | null | between | in | comparison] condition. »

  Can support _not_ QoQ lists of WHERE clauses?

  V/r,

  ^_^

  SMH - so much... I just found.

  I forgot to give the lists in the second query bracket.

  
  

  (The pseudocode was manually typed, since my dev system is isolated from the internet, and I added the in my pseudo code when they were not in my original code.)

  * headdesk * headdesk * headdesk * headdesk *.

  V/r,

  ^_^

• How to create a procedure for REF CURSOR output with any WHERE clause?

  I have a requirement like this: I have a huge question that need to reuse in my code over 10 times. This SQL has about 50 lines. Here for these 10 odd times sometimes changes in WHERE clause (columns are the same). So I can't create a view as SQL is not static.
  
  I thought to write a procedure with a para of WHERE_CLAUSE entry. I pulled out a refcursor sys by adding where clause. But I can't do it because you cannot add a clause like this where clause.
  
  i.e.

  PROCEDURE dynamyic_query (p_where_clause IN VARCHAR2, p_out_query OUT SYS_REFCURSOR ) IS
  BEGIN
  
    OPEN p_out_query FOR SELECT ......... FROM table WHERE || ' ' || p_where_clause;
  
  END;

  The foregoing gives an error.
  
  How to handle such a situation? Any help would be greatly appreciated.

  Hello

  Channa wrote:
  ... However, when I change the procedure like this:

  PROCEDURE FORMS_TEXT_DYN_SQL_TEST(p_where_cluase IN VARCHAR2, p_out_cursor OUT SYS_REFCURSOR) IS
  v_stmt VARCHAR2(1000);
  BEGIN
  v_stmt := 'SELECT tname FROM tab_test WHERE tname LIKE ''%ABS_V4%'' AND :y';
  
  OPEN p_out_cursor FOR v_stmt using p_where_cluase;
  
  END;
  

  And run this block of code:

  declare
  v_tname varchar2(200);
  out_cursor sys_refcursor;
  begin
  forms_text_dyn_sql_test(' 1 = 1 ', out_cursor );
  LOOP
  fetch out_cursor INTO v_tname;
  exit when out_cursor%NOTFOUND;
  DBMS_OUTPUT.PUT_LINE(v_tname);
  END LOOP;
  end;
  /
  

  I get the error:

  [1]: (Error): ORA-00920: invalid relational operator ORA-06512: at "ABS.FORMS_TEXT_DYN_SQL_TEST", line 6 ORA-06512: at line 5
  

  Looks like you can only set column_name =: z, column_name =: values of type y. You can not it seems to replace it with no WHERE CLAUSE?

  A bind variable, such as: it, represents a single value.
  If: is the VARCHAR2 '1 = 1', then

  SELECT tname FROM tab_test WHERE tname LIKE '%ABS_V4%' AND :y
  

  takes the value

  SELECT tname FROM tab_test WHERE tname LIKE '%ABS_V4%' AND '1 = 1'
  

  I think you want something like this:

  CREATE OR REPLACE PROCEDURE FORMS_TEXT_DYN_SQL_TEST
  (     p_where_clause      IN      VARCHAR2
  ,      p_out_cursor      OUT      SYS_REFCURSOR
  ) IS
    v_stmt VARCHAR2(1000);
  BEGIN
    v_stmt := 'SELECT ename FROM scott.emp WHERE ename LIKE ''%A%'' AND '
            || p_where_clause;
  
    OPEN p_out_cursor FOR v_stmt;
  
  END;
  /
  show errors
  
  SET  SERVEROUTPUT  ON
  
  declare
    v_tname varchar2(200);
    out_cursor sys_refcursor;
  begin
    forms_text_dyn_sql_test(' 1 = 1 ', out_cursor );
    LOOP
      fetch out_cursor INTO v_tname;
      exit when out_cursor%NOTFOUND;
      DBMS_OUTPUT.PUT_LINE(v_tname);
    END LOOP;
  end;
  / 
  

  Output:

  ALLEN
  WARD
  MARTIN
  BLAKE
  CLARK
  ADAMS
  JAMES
  

• Sansa clip-drag &amp; drop shockwave object corrupts - the error of the operating system "refreshing database".

  If by mistake, you drag and drop an object flash shockwave from your local directory from the PC to the sansa clip, corrupt you the operating system of the sansa clip. When re - start the sansa clip, clip progresses by up to 70% with error message "refreshing database", but fails to start successfully. If the press-'hold' button on sansa clip, the appliance does not start. It crashes with the error message "refreshing database' but doesn't load is not the operating system.»

  It was a user error to drag - move all the MP3 files in the directory of the PC, one of whom was of type shockwave flash object file.

  Help!

  André

  Try the clip board.  This is the map of the e200 series.