86 Windows protection error.

Similar Questions

• erroer Windows protection

  I know that win 98 is not always supported. but I have disks I need to access. My old 98 implements a protected windows error and ignores the boot files, I can only boot into safe mode. Therefore, no access to the disk or drive. d. question. How to remove this protection error?. Have you tried Msconfig, command prompt and many other solutions but I always get the same answer Windows Protection error, you must restart the computer. (All without result). Is there a solution? the computer is not connected to the internet I now a Vista operated com, but of course no diskette operation

  GC

  You have not said us what is on the disks.  If it's data, it can be able to be recovered.  If you need the OS you are frankly out of luck, especially if it's on a system more recent/64-bit.

  If you are in a more recent machine, you can be able to run a virtual XP machine that might be able to access floppy disks.

• A windows file protection error:

  A windows file protection error: "files which are required for windows to run properly have been replaced by unrecognized versions." To maintain stability, windows must restore the original versions of these files. Insert the CD 2 of Windows XP Professional now. "XP is preinstalled on the system, when I bought. I guess that "backup" files are stored on the hard drive a record 386.  Error message gives only the ability to insert the disc. Unable to navigate to say it looks like somewhere else.  Is there an 800 number to call the command?

  It is possible that the files you have are good and the problem could be that the signatures authenticate not.  This could be caused by your root certificates being obsolete.  It wouldn't hurt to go to the following article:

  "Members of the certificate program root Windows.
    <>http://support.Microsoft.com/kb/931125 >

  and go to the subsection titled "Root Update Package (intended for Windows XP only)".  Here, there is a link that will allow you to download and run an update of your root certificates.

  HTH,
  JW

• Microsoft C++ runtime error. When I am downloading World Of Warcraft. Resources Windows Protection found corrupt files but was not able to fix some. Details are provided in the CBS.log newspaper. (I ran sfc/scannow in the command window twice)

  I am trying to download the demo version of 'WoW' World of Warcraft. I get to the part where he is configing its parameters to my computer and get a runtime error that something caused my program is complete. I read the other posts which had similar problems so I ran sfc/scannow in the command prompt window. It reads...  Resources Windows Protection found corrupt files but was not able to fix some. Details are provided in the CBS.log newspaper. I've shortened, but it is easy to understand that there is a question that the scan will not fix. I tried to access the CBS.log newspaper and opened a text doc, that was a bunch of YYYYYYYYY. I'm a little lost here and my 10 free WoW trial days is weathering away without me =)

  Please help, thanks
  

  Borrow a Microsoft Vista DVD(not Dell, HP, etc Recovery DVDs) to do a repair installation

  If you see a startup Neosmart repair disk download here, this is NOT what you want.

  You want a good Vista DVD that contains the operating system files.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If you need a recovery media for your laptop back to factory settings, read this info:

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon. Mick Murphy - Microsoft partner

• Windows updates: error code 80040154

  No updates have been installed successfully in more than a month... What is the problem? Error code: 80040154... using Windows Vista basic

  * Title *.
  My Windows Vista Basic does not accept windows updates: error code 80040154. What is the problem?

  Alan,
  If you have not already opened him a pension case and you still get this error, here are a few things to try.
  Run these tools and see if one of them report errors that cannot be fixed:
  Disk error checking
  System File Checker  
  The system update tool

  If those who invent it own and you still have a problem you can run some virus\malware scan from another source and then your.  Take a look at these links because they have some great info on virus protection:
  Get rid of malware 
  Can I clean an already infected computer?   
  Windows Live OneCare Safety Scanner Windows 7\Vista

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Update error error number: 0x80072EFF

  I think windows update error error number: 0x80072EFF by updating my PC. I am also getting Generic Host Process error and after I get one that I get a few redirects and a lot of functional point of view.

  I tried all the solutions for the process generic host for win32 services has encountered a problem of error and none have worked.

  HIJackThis log

  Logfile of Trend Micro HijackThis v2.0.4
  Scan saved at 15:34:27, on 12/29/2010
  Platform: Windows XP SP3 (WinNT 5.01.2600)
  MSIE: Internet Explorer v8.00 (8.00.6001.18241)
  Boot mode: Normal

  Ongoing process:
  C:\WINDOWS\System32\smss.exe
  C:\WINDOWS\system32\winlogon.exe
  C:\WINDOWS\system32\services.exe
  C:\WINDOWS\system32\lsass.exe
  C:\WINDOWS\system32\svchost.exe
  c:\Program Files\Microsoft Security Essentials\MsMpEng.exe
  C:\WINDOWS\system32\spoolsv.exe
  C:\Program Files\Java\jre6\bin\jqs.exe
  Files\Fichiers Files\Motive\McciCMService.exe C:\Program
  c:\Program Files\Fichiers SharedCOM Shared\9.0\SharedCOM\RoxWatch9.exe
  c:\Program Files\Fichiers SharedCOM Shared\9.0\SharedCOM\RoxMediaDB9.exe
  C:\WINDOWS\Explorer.exe
  C:\WINDOWS\RTHDCPL. EXE
  C:\WINDOWS\system32\igfxtray.exe
  C:\WINDOWS\system32\hkcmd.exe
  C:\WINDOWS\system32\igfxpers.exe
  C:\WINDOWS\system32\igfxsrvc.exe
  C:\Program Files\Verizon\McciTrayApp.exe
  C:\Program Files\Fichiers Java Update\jusched.exe
  C:\Program Files\Microsoft Security Essentials\msseces.exe
  C:\Windows\System32\svchost.exe
  C:\Program Files\Messenger\msmsgs.exe
  C:\WINDOWS\system32\ctfmon.exe
  C:\Program Files\Mozilla Firefox\firefox.exe
  C:\Program Files\Mozilla Firefox\firefox.exe
  C:\WINDOWS\system32\dwwin.exe
  C:\Windows\System32\svchost.exe
  C:\Program Files\Mozilla Firefox\firefox.exe
  C:\Program Files\Mozilla Firefox\firefox.exe
  C:\WINDOWS\system32\wuauclt.exe
  C:\WINDOWS\system32\msiexec.exe
  C:\Program Trend Micro\HiJackThis\HiJackThis.exe

  R0 - HKCU Software Microsoft Internet Explorer Main, Start Page = http://www.yahoo.com/
  R1 - HKLM Software Microsoft Internet Explorer Main, Default_Page_URL = http://go.microsoft.com/fwlink/?LinkId=69157
  R1 - HKLM Software Microsoft Internet Explorer Main, Default_Search_URL = http://go.microsoft.com/fwlink/?LinkId=54896
  R1 - HKLM Software Microsoft Internet Explorer Main, Search Page = http://go.microsoft.com/fwlink/?LinkId=54896
  R0 - HKLM Software Microsoft Internet Explorer Main, Start Page = http://go.microsoft.com/fwlink/?LinkId=69157
  F2 - REG: UserInit = userinit.exe
  O2 - BHO: AcroIEHelperStub - {18DF081C-E8AD-4283-A596-FA578C2EBDC3} - C:\Program Files\Fichiers Files\Adobe\Acrobat\ActiveX\AcroIEHelperShim.dll
  O2 - BHO: Verizon SMB Toolbar - {A057A204-BACC-4D26-DFC4-79A09BF76BC9} - C:\PROGRA~1\vzsmbtb\vzsmbtb.dll
  O2 - BHO: Google Toolbar notify BHO - {AF69DE43-7D58-4638-B6FA-CE66B5AD205D} - C:\Program Files\Google\GoogleToolbarNotifier\5.1.1309.3572\swg.dll
  O2 - BHO: Java (TM) plug-in 2 SSV Helper - {DBC80044-A445-435b-BC74-9C25C1C588A9} - C:\Program Files\Java\jre6\bin\jp2ssv.dll
  O2 - BHO: JQSIEStartDetectorImpl - {E7E6F031-17CE-4C07-BC86-EABFE594F69C} - C:\Program Files\Java\jre6\lib\deploy\jqs\ie\jqs_plugin.dll
  O3 - Toolbar: Verizon SMB Toolbar - {A057A204-BACC-4D26-DFC4-79A09BF76BC9} - C:\PROGRA~1\vzsmbtb\vzsmbtb.dll
  O4 - HKLM\... \Run: [RTHDCPL] RTHDCPL. EXE
  O4 - HKLM\... \Run: [Alcmtr] ALCMTR. EXE
  O4 - HKLM\... \Run: [IgfxTray] C:\WINDOWS\system32\igfxtray.exe
  O4 - HKLM\... \Run: [HotKeysCmds] C:\WINDOWS\system32\hkcmd.exe
  O4 - HKLM\... \Run: [persistence] C:\WINDOWS\system32\igfxpers.exe
  O4 - HKLM\... \Run: [Verizon_McciTrayApp] "C:\Program Files\Verizon\McciTrayApp.exe".
  O4 - HKLM\... \Run: [SunJavaUpdateSched] "C:\Program Files\Fichiers Java Update\jusched.exe"
  O4 - HKLM\... \Run: [MSSE] "c:\Program Files\Microsoft Security Essentials\msseces.exe" - hide - runkey
  O4 - HKLM\... \Run: [adobe Reader Speed Launcher] "C:\Program 9.0\Reader\Reader_sl.exe Adobe."
  O4 - HKLM\... \Run: [adobe ARM] "C:\Program Files\Fichiers Files\Adobe\ARM\1.0\AdobeARM.exe".
  O4 - HKCU\... \Run: [MSMSGS] "C:\Program Files\Messenger\msmsgs.exe" / background
  O4 - HKCU\... \Run: [ctfmon.exe] C:\WINDOWS\system32\ctfmon.exe
  O8 - Extra context menu item: E & xport to Microsoft Excel - res: / / C:\PROGRA~1\MICROS~2\Office12\EXCEL. EXE/3000
  O9 - Extra button: send to OneNote - {2670000A-7350-4f3c-8081-5663EE0C6C49} - C:\PROGRA~1\MICROS~2\Office12\ONBttnIE.dll
  O9 - Extra 'Tools' menuitem: S & end to OneNote - {2670000A-7350-4f3c-8081-5663EE0C6C49} - C:\PROGRA~1\MICROS~2\Office12\ONBttnIE.dll
  O9 - Extra button: research - {92780B25-18CC-41C8-B9BE-3C9C571A8263} - C:\PROGRA~1\MICROS~2\Office12\REFIEBAR. DLL
  O9 - Extra button: (no name) - {e2e2dd38-d088-4134-82b7-f2ba38496583} - C:\WINDOWS\Network Diagnostic\xpnetdiag.exe
  O9 - Extra 'Tools' menuitem: @xpsp3res.dll,-20001 - {e2e2dd38-d088-4134-82b7-f2ba38496583}-C:\WINDOWS\Network Diagnostic\xpnetdiag.exe
  O9 - Extra button: Messenger - {FB5F1910-F110-11d2-BB9E-00C04F795683} - C:\Program Files\Messenger\msmsgs.exe
  O9 - Extra 'Tools' menuitem: Windows Messenger - {FB5F1910-F110-11d2-BB9E-00C04F795683} - C:\Program Files\Messenger\msmsgs.exe
  Ø16 - DPF: {01113300-3E00-11D2-8470-0060089874ED} (Support.com Configuration class) - https://activatemydsl.verizon.net/sdcCommon/download/DSL/Verizon%20High%20Speed%20Internet%20Installer.cab
  Ø16 - DPF: {05D44720-58E3-49E6-BDF6-D00330E511D3} (StagingUI Object) - http://zone.msn.com/binFrameWork/v10/StagingU

  He did had a System Tools 2011 virus that seems to have disappeared. But also, which took place on 12/24. It seemed to have disappeared, but it has problems since.

  Please see step 22 and 23 here like system tools is known for manipulating the hosts file:Remove System Tool

  Once your hosts file is OK, then strongly suggest , using Internet Explorer, you have the system scanned from here:
  OneCare Protection scanner

  NOTE: I see that you have several threads going about this infected system. The only that this system can never be approved again is at each startup of a Linux-based rescue CD or to do a clean install of Windows.

  Kaspersky offers such a rescue CD is well to clean heavily infected systems as the hard drive is not Active when the system is booted from the CD -Kaspersky Rescue Disk 10

  Expert MowGreen Windows IT Pro - consumer safety

• RE: problem with Windows Defender error 0x80072efd Code.

  I'm trying to update my Windows Defender and I get the error message 'Code 0x80072efd.'  Any ideas?  Oh, and he says: "the program cannot check the updates of definition."

  Hello

  You may encounter temporary connection related errors when you use Windows Update or
  Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  More details here:

  Try this, as it's the same for SP1 and SP2
  http://www.walkernews.NET/2009/05/14/how-to-fix-Windows-Update-error-80072efd-in-Vista-SP1/

  and here:

  http://trevinchow.com/blog/2006/08/09/Windows-Update-and-Error-0x80072EFD/
  And here

  Windows Update error 80072efd
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80072efd

  -------------------------------------------------------------

  How to manually download the latest definitions for Windows Defender updates
  http://support.Microsoft.com/kb/923159/

  Malware Protection Center - Download the latest definitions
  https://www.Microsoft.com/security/portal/definitions/ADL.aspx?WA=wsignin1.0

  I hope this helps.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows Update "error Code 80244019.

  Can someone please help me why this error; Windows Update error Code 80244019 appears when I update my computer?  I think it's due to the update of Windows Defender does not. I use Windows Vista. Please can someone help me solve this problem?

  I would check to see if you have a Trojan or a virus on your system.  He saw several cases with that error and it has been resolved by removing the Trojan horse and reboot your system. Once the Trojan horse has been removed, they were able to install from Windows Update again. It seems possible that your Windows installation has been damaged deliberately by a Trojan horse to avoid you update your system or remove the Trojan horse. Your first priority should be to clean your PC of any malware.

  (1) check that the definitions for Windows Defender is updated.

  Windows Defender is a free program that helps you stay productive by protecting your computer against the pop-ups, slow performance and threats caused by software security spyware and other potentially unwanted software.

  You can download Defender from the following web site.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=435bfce7-da2b-4A6A-afa4-f7f14e605a0d&displaylang=en

  (2) you can scan your computer now online and clean for free with Live OneCare with the scanner that is available on the following web site. Windows Live OneCare safety scanner is a free service designed to help ensure the health of your PC. It check and remove viruses and to get rid of the junk on your hard drive.

  http://OneCare.live.com/site/en-us/tryscanner.htm

  (3) use the malicious software removal tool to find malware. This tool checks your computer infections by specific, prevalent malicious software (including Blaster, Sasser, and Mydoom) and helps to remove the infection if it is found. Microsoft will release an updated version of this tool the second Tuesday of each month. You can download the removal tool from the malicious software from the following web site.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=ad724ae0-e72d-4f54-9ab3-75b8eb148356&displaylang=en

• Windows Update error 80070246

  Hello

  I have recently upgraded to Windows Vista Home Premium (SP1, 32-bit). Once installation is complete, I did the normal thing to go to windows update to get all the updates. After validation, it started to download somewhere in the order of 1 million updates (which is normal) and installed most of them without problem. However, these few finals refuse to install.

  .NET framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update - KB 951847
  For updates: KB850974, KB952004 KB953733 KB956802, KB957097, KB960803
  Update for Windows Vista: KB959108 KB952709, KB957388.

  Trying to install, I get the:

  Code: 80070246 Windows Update encountered an unknown error.

  Things, I tried that did not work and why/how they do not have to work:

  1: Download updates manually and install them with the Setup program to update windows on the local system (from windows update program) I just get the result "missed" without any explanation.
  2: started 'clean' and tried both (1) and the windows update with the same problem
  3: installation of each of them individually (both in the release order and random order) as well as a couple at a time groups, similar (updates security, updates, vista, etc)... nothing.
  4: I went to the site of support here: http://support.microsoft.com/kb/942968 and followed the instructions verbatim, including the download and installation of Windows AIK... no change.
  5: I tried "sfc/scannow" in an elevated command prompt (I also tried to take 'ownership' of my windows directory). I got the following results:

  Start of the phase of verification of the scanning system.
  Full check of 11%.
  Windows resource protection could not perform the requested operation.

  6. I run Trend Micro Internet Security for which I completely from the program (not to mention the 'clean' boot) and tried without success.

  The only thing I can think to do then (apart from reformatting..) is the option 'fix' on boot from the installation CD but I only am not 100% sure who would fix.

  Someone at - it suggestions? I'm puzzled.

  Thank you

  W1ReD

  Hi W1ReD,

  Thanks for posting answers.microsoft.com

  To successfully install the update, uninstall all versions of the .NET Framework on the computer, and then reinstall all the versions of the .NET Framework on the computer. You may need to work through more than one of the following methods.

  Follow the steps in this KB article

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update error code

  I realize that it is not specifically the error received, however, the determination is essentially the same.

  Publish on us and let us know if this does not help or if assistance is needed.

  Kind regards

  Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I try I get the windows update error number: 0x8024400A

  When I try I get the windows update error number: 0x8024400A

  Hello

  
  This problem is limited to a particular update or all updates? Thanks for mentioning the number of KB.
   
  
  Follow the suggestions below for a possible solution:
   
  Method 1
  I suggest you consult the site mentioned below:
  Temporary connection related errors may occur when you use Windows Update or Microsoft Update
  http://support.microsoft.com/kb/836941.
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
   
  Method 2
  If the problem is not solve I suggest you try the procedure described in the link mentioned below.
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
  WARNING: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/
   
  See the link below and follow the steps suggested to DG_963 on July 1, 2012.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/Windows-Update-error-0x8024400a-on-clean-install/4c79d20d-A4B3-4724-A6D8-4a768559038a
   
  Let us know the status of the issue.

• DEP closing Windows Explorer in windows XP error

  My computer is running Windows XP Home Edition with Service Pack 2. I get "Windows Explorer has been closed in error DEP". System seems usually hangs at this point and after some time, comes back with a "recovered from a serious error message" how to solve this? Is it "compatible DEP" copy of the Windows Explorer pane? It occurs once after I have start the system. After it passes by him once, it seems to do very well.

  First of all, it would be good to know why you didn't have not upgraded your system to Service Pack 3, which is more than 3.5 years.  SP3 contains many updates and security patches applied, can relieve your system of this affection.

  Check out the fixes in SP3 here:

  http://support.Microsoft.com/kb/946480

  Is not not wanting to work on Service Packs with obsolete systems (given that the question may have already been fixed with the SP3 update), I'll give you some general information on troubleshooting the errors of the DEP in Windows Explorer.

  First try to reduce the risk of a malware infection by doing this:

  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and only then to solve the remaining problems.

  If you have DEP errors, it will be useful to see if you can reproduce the error on request.

  DEP in Windows Explorer errors appear generally when click with the right button on folders or files and try to perform an action in the list right click for options.  If you can reproduce at will, then when you perform an adjustment, if you no longer see the error DEP, you will know that you have thought about it.

  When the Windows Explorer (not Internet Explorer) is wrong (especially when right click), begin to suspect third-party add-ons explore extension.

  Those who would be the Explorer extensions that do not belong to Microsoft.  This means that extensions that you have added.  Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added without your knowledge when you install the new software.

  Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (like the scan of this file, open that file, play this song...).

  If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected.  If you can get there when you want it, make an adjustment and then there is no message the next time you don't do anything, you do, you have found and corrected.

  First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem.  You can have a lot of extensions not installed Microsoft don't even know you about.

  Download ShellExView here to see what Explorer extensions you have loaded:

  http://www.NirSoft.NET/utils/shexview.html

  ShellExView does not install anything on your computer, simply of runs and displays.

  After launching ShellExView, under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems which is a difficult color to see, so click on display, choose the columns and move the column Microsoft closer to the top, so you can see on your screen without having to scroll left and right.

  Click on the column header for Microsoft sort display (by clicking on the column of Microsoft) then all the non Microsoft extensions are on top and easy to see.

  Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

  You can also Google the name of a suspect add-on and see if there is any success on the mistakes of the DEP and what other people have done about it.
  You can Google something like:

  Explorer XP crashing (you must fill in the name of add your suspect on.)

  See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

  I'm not a defender of trial and error, but I can't think of another way to do...

  Right click and disable the non Microsoft extensions one at a time (or maybe in groups of 3-5 at a time), keep a list, so you can enable them again later if you wish. The result of the change is immediate and no reboot is necessary.  Test your failure condition.  If the Explorer starts to behave, you will know that an extension of this group of 3-5 is the culprit in order to start to enable them one by one until the Explorer fails again.

  If you recognize all the extensions that have been added or recently downloaded, start with these first.

  Don't forget - disabling the extension does not uninstall the extension - it is just disabled so you can always turn it on again.

  Disable them one at a time until your right click on do not generate an error, then restart and test again.  You have disabled the last extension would be suspicious.

  You can also just disable all non-Microsoft extensions, restart and allow them one at a time until you find the one that generates the condition.

  If you have a large number of extensions, you can disable them is small groups, 3-5 at a time instead of 1 at a time until your system starts to behave.  When it does not, you will know that the problem is one of the extensions of this small group and you can enable members of the Group at a time until the problem returns, then the problem is with the last extension that you enabled.

  The hope is that you will find an extension that caused the error, and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.

  I have not your problem, but I can when you toggle extensions, the extension is immediately disabled, so disable an extension does not seem to require a restart, but if you think that you have found the problem, I reboot and repeat the test in any case to be sure the problem disappeared.

  If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.

  If you find the offending extension that's the problem, please let us know what it is that I can add to my list.

• SanDisk Mobile Ultra 64 GB write protection error

  I bought this card 4 to 6 months ago. It has worked great since last week-two when I started having problems with listening music etc (sometimes he stop or change the music in the middle of the track). I first thought that his problem with Android and I need to reflash it or maybe that the headphones are broken, but when I reflash Android I always format microsd and here's my problem - I can't do it!

  GParted on ubuntu gives me error with the substitution of partition (something like "this partition exists") and after updating, everything is as if it was earlier.

  On windows, I tried sdformatter (write protection error), easeus (near gparted) and windows tool (it is said that "the device can not be format").

  Now I don't know what to do. I want to "fix" myself, but maybe its totally broken.

  Any advice? Can I do something to make it useful?

  Thank you

  Both pis, man. There is no way to correct the error of write protection. You can call SanDisk to get a replacement.

• Windows defender error 0x8000106ba

  I get an error message: windows defender error 0x8000106ba. What is c? I use windows Vista Home Basic. This happened only after I installed mcafee antivirus protection or either windows updates. I don't know but anyway that I can't get rid of the message. and it does not access my start-up changing the programs in Control Panel.

  Hello lovely2040,

  Thank you for using the Microsoft Answers forums.  I suggest that you use the System File Checker tool.  To use the tool (SFC.exe) System File Checker.   To do this, follow these steps:

  1. open an elevated command prompt. To do this, clickStart, click principally made programs, accessories, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  2. type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Update error code 8E5E0147 when installing KB968930 update

  I have windows vista and when I try to install update KB968930, I get the Windows Update error code 8E5E0147. Nothing seems to fix this error. Any suggestions?

  Hello

  There could be various reasons for the updates to fail. No matter what security software installed on the computer may crash or services related to the programs installed on the computer. Also if there are corruptions in the files\folders related to Windows updates.

  Reset update components would actually try fixing the part of corruption by recreating these files and also to re-register the files necessary .dll (Dynamic Link Library).

  http://support.Microsoft.com/kb/968930

  Some users corrected this problem by resetting the components of windows updates. Try these steps and check the result.

  Temporary disable the firewall/security settings and check if it makes a difference.

  http://support.Microsoft.com/kb/283673

  Do allow him back course so that your computer is protected.

  Method 1: Reset Windows Update components.
  Log on as administrator.
  a. visit http://support.microsoft.com/kb/971058
  b. click Microsoft fix and run successfully.
  c. restart the computer once the tool is run.

   

  Method 2: I recommend you perform the clean boot.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  For more information, see the following link below:
  http://support.Microsoft.com/kb/2509997

  Hope this information is useful.

• Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

  Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

  Would you advice, thank you.

  Hi Hugo,.

  1. what anti-virus software you have installed in the computer?

  2. What is the full error message/code?

  3. the issue occurred after you install Minecraft?

  4. are you able to play Minecraft without any problem?

  5. what happens with Antivirus and Java?

  Windows Update can occur if one or more of the following conditions are met:

  1. the Windows Update database is damaged.

  2. antivirus software is configured to scan the %Windir%\SoftwareDistribution folder.

  3. the service (BITS) Background Intelligent Transfer Service does not receive a content link header.

  4. a required system file is incorrectly registered.

  5. Windows Installer has encountered an error.

  6. the manifesto of component maintenance (EC) is damaged.

  7. the Windows Update service has stopped during the installation.

  8. a version of the file conflict exists with Windows Update agent files.

  Please follow the steps described in the methods to solve the problem:

  Method 1: We will try the steps from the following link and check the result:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058?WA=wsignin1.0

  Method 2:

  To correct the errors that occur when you use Windows Update, install, and run the system update readiness tool. The tool analyzes inconsistencies on your computer and fixes as its current installation.

  You can view the following link to download the system update readiness tool and check:

  System tool update that corrects problems of Windows Update is available for Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  Details of the event log to find what caused the Antivirus and Java to fail:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Hope that the information provided is useful.

  For any help related to this problem or any question of Windows, you can still display in the Microsoft Community Forum!