Impossible to use MAX to connect remote SMU-8840 running RT

Similar Questions

• Can I use MSTSC to connect remotely on the internet?

  Can I use MSTSC to connect remotely on the internet (local computer is Vista Ultimate SP2 to a distance Win 2003 Server)? I used MSTSC on my local network and it works well.

  Hi Ibaltsae!

  Thanks for posting. Yes, you can use MSTSC to connect remotely to a computer or server on the internet, the same as if you were using your local network. To connect to the remote computer, use the DNS or public IP that are associated with name.

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Access PIX using SSH when connected remotely with VPN client

  Hello

  I think that this should be a fairly simple for someone to sort for me - I'm new to PIX configuration If Yes please excuse my stupidity!

  I changed the config on our PIX to allow only access via SSH (rather than via telnet as it was previously configured)

  Now, everything works fine when I'm in the office - I can connect to the PIX using SSH without any problem.

  However, if I work from home and connect to the office using my VPN client (IPSEC tunnel ends on the PIX firewall itself) I find that I can not connect to the PIX.

  I have configured the PIX to access ssh on the office LAN subnet and the client pool of IP addresses used for VPN connections by using the following commands:

  SSH 172.64.10.0 255.255.255.0 inside

  SSH 192.28.161.0 255.255.255.0 inside

  where the 1st line is reference to the office's LAN, which works very well, and the 2nd line denotes the IP address pool configured on the PIX for VPN access.

  Can someone tell me how to fix this? I have the feeling that its something pressing!

  Thank you

  Neil

  Try the command "management-access to the Interior.

• VMware Capacity Planning without using an Internet connection

  Hello

  I tried run VMWare Capacity Planner without using an Internet connection. I have run Performance and utility collection of inventory and then I synced data. I was able to see the CSV files in the Outbox. I copied the folder on an interenet connection machine having when I click on synchronize data, it began to send the data to the dashboard. the data has been sent successfully, but when I am logged into the dashboard there is no data view. A message was displayed as not enough data.

  Please let me know if I made a mistake in my approach.

  Thank you

  Pravesh

  can u check with the administrator of your organization, which has admin on dash rights and see if the data is correctly downloaded to the dashboard.

  also can ensure you that you use the same credentials on the two boxes on the client side. simple reason being it might be issue with the property user and group data that are downloaded.

• How to: use desktop connection remote with windows 7 to windows xp sp3

  Original title : is it possible to use the new remote desktop provided with windows 7 to windows xp sp3 I want to use the audio options

  Hello
  Please I want to know if there is any way to use the new options included in windows Remote Desktop connection 7 update connection Remote Desktop in windows xp sp3 or as the RTD of widows 7
  is there a way please just send me email to * address email is removed from the privacy *.

  Thanks in advance
  hamadakhalaf

  Hello

  You need third-party software to do this, I suggest you use your favorite search engine and check for the software that supports this option.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Also check out this link:
  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/thread/a29f6207-4551-4AE1-941e-364919f50ad4

  It will be useful.

• Connection remote desktop has appeared in my Start menu, but I don't use it, does that mean someone else has had access?

  I sat down at my computer today (I'm the only person who uses it) and pulled the top of the start menu. There were four programs listed there that I have not used for several months:

  Remote Desktop connection
  Dreamweaver MX
  Freehand MX
  MS Office Picture Manager

  In my opinion, that means that someone had access to my system.

  Can I change my remote desktop connection to protect against this, or is a more complete analysis of my machine required?

  The remote desktop connection settings include providing everyone the read and Read & Execute access. If I remove these options that will make me safer? Skype uses this access (this is the only thing that could, I think I use)?

  I went to system properties and remote access disabled.

  Windows 7 Home Premium, Service Pack 1

  Hello

  Thanks for posting your query in Microsoft Community.

  According the information you have provided, I understand that you need information from remote desktop connection settings in Windows 7. I will certainly help you in this matter.

  Please visit the links.

  Remote Desktop connection

  http://Windows.Microsoft.com/en-in/Windows7/products/features/Remote-Desktop-connection

  What types of connections remote desktop should I allow?

  http://Windows.Microsoft.com/en-in/Windows7/what-types-of-Remote-Desktop-connections-should-i-allow

  If you face problems more when working with Windows Mail on the Microsoft Community Forum.

• Impossible to use the IR remote control after you install Touchpad

  I have a C40 that was used with the infrared remote control successfully for months. I recently installed a Touchpad plugging directly into the 2nd port eNet.  The software is underway at 6.2.0.  Immediately after that I have connected and started using the touchpad, it was noted that the unit no longer meets the IR remote.  The base of the camera flashes when ar buttons pressed on the IR distance indicating that the IR signal is received, but there is no response from the codec.  Is this a "feature"?  Can I use the remote and the touchpad?

  Hello

  Touch screen and remote control cannot work side by side. Once the touch screen is connected, it takes full control of the on-screen display, allowing no changes from the remote control. This is expected behavior.

  Hope that answers your question.

  Thank you

  Saint André
  Telepresence solutions group

• The ORA-12514 error when you try to connect remotely

  I am trying to connect remotely to the 12 c with SQL Developer Oracle database. In order to connect remotely from another computer, on the server that is running Oracle, I opened a port in the firewall of Windows 7. The listener.ora file, as you can see below, has its default listening port set to localhost.  So, I created second listener called REMOTE_LISTENER, to listen on a different port to 1521.  I put it in place of 1531.  That part worked, but now the listener isn't me in due to this error IN what ORA-12514 earphone does not currently of service required to connect descriptor.

  This is the setting of the SQL Developer on the remote computer:

  

  It's the side server, listener.ora file:

  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = CLRExtProc)
  (ORACLE_HOME = C:\app\Owner\product\12.1.0\dbhome_1)
  (= Extproc PROGRAM)
  (ENVS = "EXTPROC_DLLS=ONLY:C:\app\Owner\product\12.1.0\dbhome_1\bin\oraclr12.dll")
  )
  )

  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
  (SERVICE_NAME = editor)
  )
  )

  REMOTE_LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.2.19)(PORT = 1531))
  (SERVICE_NAME = editor)
  )
  )

  It's the tnsnames.ora file:

  PUBLISHER =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.2.19)(PORT = 1531))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = editor)
  )
  )

  LISTENER_EDITOR =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = editor)
  )
  )

  
  ORACLR_CONNECTION_DATA =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
  )
  (CONNECT_DATA =
  (SID = CLRExtProc)
  (PRESENTATION = RO)
  )
  )

  As you can see, I edit the file tnsnames.ora slightly to allow a connection to the database of the editor, but my edit does not seem to fix anything. You will notice that I also updated the port 1531 to match the listener in the listeners.ora file.  I can not connect with SQL Developer on the client side. I am able to connect locally with the SQL Developer on the server, but I need to access the database from a different computer.   I am able to connect to the database using SQL more on the server.

  I ran lsnrctl service from the command prompt. Here is the output of this command:

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)) (SERVICE_NAM

  E = editor))

  Summary of services...

  Service 'CLRExtProc' has 1 instance (s).

  Instance of 'CLRExtProc', status UNKNOWN, has 1 operation for this service...

  Managers:

  "DEDICATED" set up: 0 denied: 0

  LOCAL SERVER

  Service "Editor" has 1 instance (s).

  Instance "editor", State LOAN, has 1 operation for this service...

  Managers:

  "DEDICATED" set up: 0 denied: 0 status: ready

  LOCAL SERVER

  Service 'editorXDB' has 1 instance (s).

  Instance "editor", State LOAN, has 1 operation for this service...

  Managers:

  "D000" put in place: 0 denied: current: 0 0 max: 1022 State: loan

  DISPATCHER < machine: PC SHIERS, pid: 1580 >

  (ADDRESS = (PROTOCOL = tcp) (HOST = Shiers-PC)(PORT=49367))

  Service 'pdborcl' has 1 instance (s).

  Instance "editor", State LOAN, has 1 operation for this service...

  Managers:

  "DEDICATED" set up: 0 denied: 0 status: ready

  LOCAL SERVER

  The command completed successfully

  As you can see, it shows a service instance named "editor."  It comes, it does not say which port.  You will also notice a service named "editorXDB". Where it went out, I don't know.  It is certainly not in the tnsnames.ora file, and whenever I run the lsnrctl services command port number changes.  In any case, this part, I think, is a red herring.  I've been spinning my wheels on this one for a few days.  If anyone can help me with the steps to connect to a remote computer via SQL Developer, it would be greatly appreciated.

  So now what would be better, it's if we could get the database to dynamically register with the listener as it should so that I get the READY State.  Could help you with this please, then I think we're done.

  
  

  What is the setting for the LOCAL_LISTENER parameter in your database?  To keep things simple, it must be null, which allows the DB to-default - use the 1521 port to communicate with the listener for the record.

  See: (exploring the-local_listener-parameters)

  (SID_DESC =

  (SID_NAME = editor)

  (ORACLE_HOME = C:\app\Owner\product\12.1.0\dbhome_1)

  (GLOBAL_NAME = editor)

  )

  )

  
  

  BTW, * if * you insist on using a listener.ora and you insist on the use of the SID_LIST section in this document, you should really use SERVICE_NAME instead of SID_NAME.

• Application crashes when connecting remotely for debugging

  Hello again all you lovers forum useful!

  I'm debugging a strange behaviour in my application that does occur on a specific computer in special circumstances.  To do this, I have enabled debugging in my application and finally was able to see it as an option in the menu "Debug Application or Shared Library" on my local computer (I had to first find out the hard way that you cannot change the name of the application and have always run in debug mode, even if you change the name of the associated also .aliases and .ini files).

  When I try to connect to my request, the "connection status" displays lists of downloading my subVIs much and then finally downloading my main VI.  At this point, my main VI façade appears on my local computer.  However, everything freezes then, while on the remote computer, my application (waiting for correctly so that the debugger start) crashes with a generic Windows "...". has encountered a problem and needs to close"message.  If I click to more information, I see that the name is lvrt.dll (my application is usually not real-time, but it uses a timed loop or two).

  I would like suggestions as to what may cause this error and how to fix it.  Unfortunately, because it's a working application I can't post my code.  I'm using LabVIEW 2010 SP1, and two computers running Windows XP.

  Thanks in advance for your time!

  -Joe

  Well, I accidentally worked around the problem, although I never found the root cause.

  My applications MS Office had put by my it Department yesterday, and now when I compile my app, it tells me that a VI integrated Excel is broken, somewhere in the NIReport.llb folder, I added to the section 'always include' my construction specification application source file properties.  I removed NIReport.llb temporarily since I do not have the part of my application which is used to make this debugging and debugging now my application works.  Weird!  I was able to successfully debug my original problem that started this whole mess, though, so I'm happy with the final result.

  Now, I just get NIReport.llb working again.  I'm guessing there are probably an updated version to match MS Office 2010, which is my new version.  I had added NIReport.llb to support using "Easy text Report.vi" for printing.  Given that my app size dropped 50% when I got him out earlier, I can get another printing option, however.  I can solicit the opinions about it, but if so I'll so, in another thread to keep this one to.

  To anyone who has been reading this thread and thinking about how to solve my problem, thank you for your time!

  Until next time,.

  -Joe

• Cannot run executable LabVIEW on desktop connection remote

  I have a couple of executable files, which are compiled using a LabVIEW 2011 development system, installed on a Windows XP computer.  These programs run fine when I double-click the icon while sitting at the computer.

  If I connect to the phone remotely from another Windows XP computer using Remote Desktop connection, I can use the remote computer normally except for the executables LabVIEW.

  When I double-click on one or the other, I get the error message displayed in the attached file. The part of the text of the report has no useful information, just two lines that seem to be field for e-mail names.

  What gives?

  Remote debugging is not a good substitute because it requires the executable file already be running.

  I was able to run two executables LabVIEW on desktop connection remote to a virtual machine of Windows 7 with 2 GB of RAM, running on a MacBookPro using Parallels Desktop.

  This confirms that the problem was insufficient for memory resources.

• Is it possible to connect remotely on another computer of mine?

  I HAVE TO WOUNDER, IS IT POSSIBLE TO CONNECT REMOTELY ON ANOTHER COMPUTER OF MINE?

  THE THING IS, I WANT TO BE ABLE TO ACCESS GUEST ON ANOTHER COMPUTER IN MY COMPANY.
  THE PROBLEM IS, THE FIREWALL IS ENABLED ON ALL COMPUTERS, AND SINCE I AM NOT ALLOWED TO ACCESS, I CAN NOT TURN OFF.
  SO, IS IT POSSIBLE TO ACCESS OTHER COMPUTERS OF MY, DESPITE OTHER FIREWALL COMPUTER IS TURNED ON, WITHOUT A USER ON ANOTHER COMPUTER TO KNOW?

  I NEED TO USE CMD. EXE ON THE REMOTE COMPUTER, WITHOUT USER ON THIS COMPUTER TO FIND OUT.

  YBY

  original title: REMOTE CONNECTION

  You cannot connect to another PC remotely if the firewall is configured to refuse the connection.  Why do you want to work around the security of the other PC?  That seems not very friendly for me.

• We have laptops in the field who use VPN to connect. How can I get these systems to update our DNS when they connect to the VPN?

  Our mobile sales are part of a domain but not connected to our network. Cached credentials are used to connect outside the office. Once they connect and view their desktops, they select the card from Verizon and use it to connect to our network via a VPN connection. These generally to enter an IP address but the router that connects and not from our DHCP server. This usually means that updates to our DNS servers are not always instantaneous (or update at all).

  When they are done for the day, they just closed the lid of the laptop and he starts in mode 'sleep'. The next day, they open the lid and no lgin is necessary, but they do not need to reconnect to the VPN through their cards from Verizon.  How can I configure my DNS to update more frequently or maybe these computers portable bécon a command "ipconfig/registerdns"?

  We have to connect to these systems in the field and it is almost impossible, unless we call the sales person and ask them their IP. We have more than 350 laptops in the field, then this makes it almost impossible to update all the.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows XP on Technet. Please post your question in the Technet forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• Can I use NetMeeting to connect two computers in different physical locations using NetMeeting to dial a modem line with another computer

  original title: Microsoft Netmeeting

  Can I use NetMeeting to connect two computers in different physical locations but a local call using NetMeeting to dial a number to the other computer by a traditional dial-up 56K modem via telephone lines, (US Robotics ISA 56 K Win Modem kVoice) dialing the telephone number of the other person & their dial-up Modem too?  NetMeeting there software to do this, or do we need to use other software, downloaded or already in Windows XP?  Can we use NetMeeting on Windows XP Home Edition or XP Professional?  We do NOT want to go through the Internet, as our students do not have at this time of money to afford Internet connectivity.  . You want to use NetMeeting for tutoring purposes.

  Hi Rafael,

  Yes, you can use NetMeeting to connect two computers. Follow the steps in the article.

  How to turn on the feature Windows NetMeeting Remote Desktop Sharing in Windows XP Service Pack 2 or Microsoft Windows XP Tablet PC Edition 2005

  http://support.Microsoft.com/kb/878451

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/app_netmeeting.mspx?mfr=true

• Desktop connection remotely from Windows 7 to windows XP Edition family

  I have a laptop running windows 7.  I'm trying to use the remote desktop connection to connect to my office.  The desk top is an Imac.  I have partitioned the hard drive on the Imac and am running windows xp home edition on the side of the windows partition.  It is this 'computer' and I try to access it via the desktop connection remotely from my laptop.  Thanks in advance,

  Rob

  The editions of Windows Home, if XP or Vista (and maybe even 7) may not be the side server to a remote desktop connection.  They do not contain the code necessary to accept the connection.

• I am trying to accept an invitation from my mom's remote assistance and this is what I got after entering the password: connect Remote Assistance could not be established because the DNS name of the remote computer cannot be resolved.

  I am trying to accept an invitation from my mom's remote assistance and this is what I got after entering the password: connect Remote Assistance could not be established because the DNS name of the remote computer cannot be resolved.

  You get the error "a Remote Assistance connection could not be established because the DNS name of the remote computer could not be resolved" when the requesting computer (the computer 'demand' help) sends its private IP address instead of its public IP address in the request for assistance. The solution is 'easy' for some and difficult for others. I present here for your perusal:

  (1) obtain the public IP address of the requesting computer (by visiting a web page such as http://www.whatismyip.com)
  (2) save the remote assistance request computers
  (3) modify the remote request for Assistance (RcBuddy.MsRcIncident) using a text editor (such as notepad) and replace the private - section of IP address should be something like this:
  RCTICKET = 65538,1,192.168.1.33:3389 «»
  with the public IP address from whatismyip.com or elsewhere - should be something like this:
  RCTICKET = 65538,1,74.125.47.147:3389 «»
  (4) save the file of RcBuddy.MsRcIncident 'new '.
  (5) double click it to connect to the computer needing help
  (6) cross your fingers and hope it works!

  I hope this helps someone else - if it's too much trouble, feel free to use the tools mentioned elsewhere in this thread.

  -Computers Acorp
  www.ACoRP.net