8610 printer it's paper does not print

Similar Questions

• DeskJet F4580 All in one printer paper does not

  The printer above does not feed to print paper.  I cleaned the rollers, as indicated in the user guide, but nothing helped.  What can I do to fix?

  Printer is almost a year old but barely used.

  I reinstalled the software and now works fine. Thank you.

• HP Color Laser Jet CP1215: print - guard 'book light' flashing - printer stops charging of paper does not alter

  Hello!

  For about a week, I have the following problem with my HP Color Laser Jet CP1215: after 2-3 pages of printing, the device stops abruptly in the middle of a job and the light number 5 (paper) continues at the flashing light.

  However, the bin is full with paper.

  Ignitions and extinctions help only for another 2-3 pages, then printing will stop again as described above.

  Is there maybe a photoelectric cell that needs to be cleaned or a mechanical part that gives the status of bad paper from the paper tray to the printer?

  Thanks in advance for any help,

  Best wishes

  Herwig

  Hi @wigl,

  Welcome to the Forums of HP Support!

  I see that your HP Color LaserJet CP1215 printer stops printing when the print jobs. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I can see how frustrating it would be. To determine the cause, we need to use more than one document. Redundant that some steps may seem, I would execute all.

  Please, try the steps in this these guides:

  • HP Laserjet CP1215 and printers CP1217 - 'paper ' Error Message is displayed and the printer does not look upward or feeding paper.
  • The Paper Jam flashing on HP Color LaserJet CP1215, CP1217 printer.

  If the problem persists, try a hard reset:

  • Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  • Reconnect the power cable to the output of the printer and the wall, and not a surge protector. This ensures that the printer is full on and can help this situation.
  • Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Office Jet 8610 all-in-one: fax does not install

  Can someone help me please?   I have printer uninstalled somehow the 'fax' when I was on the move. I set the printer to the top, even re downloaded the driver for Mac Os X. I "added" a new printer, but it still does not show the 'fax' option when I hit 'print' as before. And the 'fax' does not appear in my list of printers.  I could use some help.  Thank you in advance. Gigi

  Hello @GGSA!

  Thanks for posting on the HP Forums!

  I would be happy to provide you with some suggestions that can help solve the problem!  There may be a slight problem with the software.  I know that you have reinstalled the drivers, but I suggest you uninstall the HP software. Once the software uninstalled I recommended to perform a "repair disk permissions" on your Mac. A repair disk permissions is a utility built into the operating system Mac designed to detect and resolve problems or errors. After that permission to repair disc is finished, reboot your Mac computer and re-install the software.

  To uninstall the software HP click here: uninstall the HP software

  To perform a repair authorization disk click here: repair disk permissions

  To download the HP software, click here: Officejet 8610 software and driver

  After the installation I recommend that you check the software updates on the Mac. To search for software updates, click the icon "Apple" to the left and click on the "app store". In the app store, you can click on the "updates" at the top of the window. Updates install and Hp or a printer. After the update, you must restart the computer.

  If please, after back and let me know if this worked for you!

• Photosmart 7510 - will not print black on any parameter of photo paper (does not print on plain paper setting)?

  HP Potosmart 7510, printing from a memory card.  Using premium photo paper (glossy), set printer to print on HP Premium Plus Photo), printing out with Black/Brown areas in the blue-green instead of black.  Printing using plain paper, set printer on regular paper, just fine.    Same thing happens when I tried Advanced Photo and a Photo paper - print comes out with a blue-greenish cast in areas that should be black/brown.

  Tried to print a black and white photo - identical to all other attempts - if the choice of the photo options paper, the dark areas are blue/green.

  Comment - then try printing from the computer (wireless), produced the same result - black areas are printed in blue-greenish.

  Tried cleaning the cartridges, alignment printer, print quality status report looks very good.

  Door on this forum and general web search.  Nothing has yet solved problem.

  What should I do?  Any ideas/suggestions?

  Yes, this is the case on a 7510.  I worked on the answer.  Although "ink" diagnostice demonstrates both the black and the cartridges 'photo black' as being low, the 'black photo' was apparently empty.  The black of the photo must be called only because when the print properties are defined for the "photo paper", and when it is empty the black dark areas print in blue-green.  I thought that the black photo cartridge was a gray, for most thin shades grey, but maybe it's an intensifier of some sort.  It's a shame that HP does publish no real information.

• printing on acetate paper does not

  Hi I have ever printed on sheets of acetate before my printer (epson stylus sx215) feeds just the sheet through when I go to print

  have no problem printing anything else, is there something I need to do in the settings?

  Hello

  Contact Epson support because it is the problem of printer setting:

  http://www.Epson.co.UK/printers-and-all-in-ones/inkjet/Epson-Stylus-SX215/drivers-support?supportLandingPage=true

• collection of paper does not

  HP officejet pro 8600 more... held for 7 months, it indicates that the paper source is empty.  It's not picking up the paper.  I cleaned the rollers and went through the tutorial without result.

  Welcome to the printerisnotpri forums!

  I saw your post on your 8600 JO do not pick up the paper. I understand that you have followed a tutorial about it, however, I suggest reading on troubleshooting guide below to ensure that you have tried all the steps for this issue.

  ' A ' Out of paper ' or 'Choose the motor at a standstill' message and the printer not picking up or feeding of the paper in the main tray

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

  Enjoy your weekend

• My officejet 6500 paper does not feed correctly (it folds upwards)

  Until recently, my printer worked fine. But after a previuos paper jam, the book will not insert through. She folds upwards instead of rolling.  I removed all the bits of paper that I could see. Say to check the wheel 'stars' someone can the help page tell me how to do this?

  I have ried cardstock through the diet. He took out a piece of crumpled paper, which had been jamming things up. If my printer works now.  So I no longer need an answer.

• How to connect the HP Officejet Pro 8610 to a laptop that does not connect to internet

  Just bought the HP all-in-one Officejet Pro 8610 for the local historical society. The laptop and the printer will be connected to the Internet. The printer will only be used for printing reports, scanning images, etc.

  I just removed the instruction manual to familiarize myself with the connection procedure, but I noticed there are several references that require internet access.

  Is there a workaround solution that allows me to install/connect the printer without having to access the internet?

  Thanks in advance for your help.

  Hello

  Given a special environment USB is probably the way to go. You don't need a special USB cable. Your printer has two USB ports, one on the front (#4) and the other at the back. You must use the rear USB port (#13)

  

  And the USB cable is similar to the following:

  http://www.pccasegear.com/index.php?Main_Page=product_info&products_id=25512&cPath=135&utm_source=GoogleBase&utm_medium=CSE&utm_campaign=export_feed&gclid=CJqz96LO-8ECFdglvQodZmkAYA#GoogleBase

  The "flat" end for your computer/laptop and 'round' (well almost round) is for the printer. Please check the box first, depending on where you are (country, region), the cable may already be inside the box.

  Kind regards.

• My paper does not close

  How can I get my documents to close after trying to download a game on the internet? He has been at a standstill for two days and will not close. I ran virus checks and they have no effect on the situation. Thanks for the help!

  Hi SharonJumoke,

  1. what operating system do you use?
  2. what documents you try to close?
  3. What is the exact error you get when you try to close the document?

  Method 1
  I suggest you boots the computer for the safe mode with networking. the following link will help you to start in safe mode with network (click the advanced startup options in step 3 of the article).

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2
  Once you start safe mode, you must start the computer to clean boot, the following link will help you to start the computer to clean boot.
  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: Put the computer into normal mode.
  A. Click Start, right-click computer and then click on manage.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  B. in the console tree, click Services and Applications and then click Services.

  (C) in the part of details, right click of Windows Installer and then click Start.

  Method 3
  I suggest you to check in the observer of events and choppy back with the exact error message.
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer (Windows7)
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer (Windows vista)

• EDU order Master Suite CS6 paper does not not on CC

  I have a teaching degree and am still a student, but I want to start using my office at home instead of my laptop. Because I can't dl, software via the application manager, how can I have access to the suite on my desk? When I try and enter my serial key via the installation of cloud, I get an error that the serial key is not valid for APP CC. What can I do?

  Thank you.

  You can try to download the site CS6: http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  or you can buy a new CC license

  Axel

• HP Deskjet 2050 A does not print

  no error message

  test paper does not print

  printer is ready

  We port is used

  Hello

  1. What is the operating system installed on your computer?

  2. don't you make changes to the computer before the show?

  Please follow the steps mentioned in the links below

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Final print size does not match the view screen.

  Hello

  I have problems to make my final prints to match the screen display.  Recently, I had this problem: I have an image which is of size at 5 X 7.  I have it on a 5 X 7 model in the Lightroom print module.  The dimensions of the image in Lightroom say 5 X 7.  I have printing on 5 X 7 paper (I actually measured it to be sure).  ON the screen, they look perfect, corresponds to the templates and measure fime with leaders at the screen.  Without fail, a part of the print is cut on final printing.  Along side printing is the most affected.  It is not only limited to 5 X 7, it happens in all areas.  Is this a common problem or I'm I have something wrong?  In the 5 X 7 example above the impression comes from 5.2 X 7.3 give or take.  I use Lightroom 5.3 on an iMac running OS 10.9.1.  The printer is a Canon Pro 100.

  I look forward to help with this.

  Thank you

  Joe

  If the problem is that the printed image is proportional to the largest, it is a very common side effect with the mode parameters borderless print drivers. In general, (although sometimes you can avoid this where alternative options without borders are given)-edition special unrequested % scale ensures that any physical wrong registration or the inaccuracy of the size of the paper, does not allow accidental white edges.

  It's nothing to do with the end of LR in the process, as appropriate.

• Inkjet HP cm1415 rolls does not turn

  My friend has an inkjet hp cm1415 and the ADF does not feed...
  

  When turned on it goes through the cycle and can see
  

  What happens up there, but the roller does not turn
  

  to feed the paper.
  

   

  The roller before going up and down when you turned
  

  It's on.
  

   

  But put a paper in there and press copy makes a
  

  copy is as the paper does not feed.
  

  If the reset does not solve the problem, I suggest to call HP @8004746836 and see what options we have to replace or repair the unit.

• HP Envy printer 5540: printer does not recognize paper 8.5 x 11

  I removed the paper 8.5 x 11 and printed several photos 5 x 7. I removed the paper photograph 5 x 7 and reinstalled paper 8.5 x 11 in the main tray. Printer will not recognize paper 8.5 x 11. I removed the paper and slid back the paper guides and reinstalled the paper. No change in the problem. When I select "Copy" on the screen of the printer and go to settings, it displays "tray and main paper tray: 5 x 7" if I try to print from the computer and select 8.5 x 11 paper, the printer does not recognize that size paper and continues to display paper 5 x 7.»

  Hello

  Open and close the paper tray, here, it will show on the screen of the size of the paper.

  Click on modify and change paper size we Leter and the type of paper, such as plain paper, then check all difference.