collection of paper does not

Similar Questions

• I've downloaded css 5.5 master collection, but it does not ask the serial number

  I've downloaded css 5.5 master collection, but it does not require serial number and crossed lance 2nd file... in the end, I'm not be prompted to enter the serial number and it does NOT appear on the list/programs on the start menu.

  Help!?

  Hello

  Please see the links below.

  Install Adobe Creative Suite 5 or 5.5

  Troubleshoot installation | CS5, CS5.5

  I hope this helps.

  Concerning

  Vivet

• DeskJet F4580 All in one printer paper does not

  The printer above does not feed to print paper.  I cleaned the rollers, as indicated in the user guide, but nothing helped.  What can I do to fix?

  Printer is almost a year old but barely used.

  I reinstalled the software and now works fine. Thank you.

• HP Color Laser Jet CP1215: print - guard 'book light' flashing - printer stops charging of paper does not alter

  Hello!

  For about a week, I have the following problem with my HP Color Laser Jet CP1215: after 2-3 pages of printing, the device stops abruptly in the middle of a job and the light number 5 (paper) continues at the flashing light.

  However, the bin is full with paper.

  Ignitions and extinctions help only for another 2-3 pages, then printing will stop again as described above.

  Is there maybe a photoelectric cell that needs to be cleaned or a mechanical part that gives the status of bad paper from the paper tray to the printer?

  Thanks in advance for any help,

  Best wishes

  Herwig

  Hi @wigl,

  Welcome to the Forums of HP Support!

  I see that your HP Color LaserJet CP1215 printer stops printing when the print jobs. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I can see how frustrating it would be. To determine the cause, we need to use more than one document. Redundant that some steps may seem, I would execute all.

  Please, try the steps in this these guides:

  • HP Laserjet CP1215 and printers CP1217 - 'paper ' Error Message is displayed and the printer does not look upward or feeding paper.
  • The Paper Jam flashing on HP Color LaserJet CP1215, CP1217 printer.

  If the problem persists, try a hard reset:

  • Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  • Reconnect the power cable to the output of the printer and the wall, and not a surge protector. This ensures that the printer is full on and can help this situation.
  • Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Export Collection Action listener does not work on dynamic VO?

  I have a screen that generates a dynamic table using the createViewObjectFromQueryStmt().

  The screen works as expected, and all except when I drag an export Collection on it. My excel sheet is empty.

  Is there something I'm missing? It works only on real and not dynamic ViewObjects?

  With the help of 12.1.3 and built in 12.1.3

  Thank you.

  Then done using BLOG of VINAY @ http://www.techartifact.com/blogs/2013/08/generate-excel-file-in-oracle-adf-using-apache-poi.html

  as my heel.

  APACHE POI has problem to download an excel sheet.

  However, the Blog does not include my dynamic qurery can return records 10000 +. His solution was not memory friendly approach, the best was to create a set of child line iterator and iterate over the lines instead of load everything at once in a TABLE... also if you end up copying and pasting the solution and you get back only 25 records make sure that you assign-1 to your reach and attend the slowness of your application.

  Thanks.@v

• dynamic collection update process does not properly

  Hi all

  This is pavan,

  I use apex 4.2.3

  I try to get add line dynamically with update I'm able to do, when I am adding data in the table and clicking the data previous is not fetch its refreshed and empty lines are coming, we hear the collection not updated

  to do this, I spoke https://apex.oracle.com/pls/apex/htmldb/f?p=31517:294:129399391179038:ADD_ROWS:NO:

  and help the update of table with dynamic Action form

  and APEX_COLLECTION

  but I am unable to do I tried here http://apex.oracle.com/pls/apex/f?p=52985:5:101957963538920:

  am I missing something please let me know.

  Thanks in advance,

  Kind regards

  Pavan

  Hi Pavan,

  Check your page again please.

  I changed a code (your code commented on and put in some new)

  Your update has not looked like it worked because you had an error in your column map: you assigned the f05, f06, f07 and text elements, yet your application was based on the columns c001 and c002, c003 collection. So basically you have been updated from columns 5-7 and looking at 1 to 3 columns.

  I also changed your header before your worked well, but by using apex_collection.create_or_truncate_collection is easier to use because it does not require checking for an existing collection.

  Kind regards

  Vincent

  http://vincentdeelen.blogspot.com

• Adobe Creative Suite 4 Master Collection disc 2 does not work.

  I've updated my computer and can't recharge my Creative Suite 4, collection of the student, on my new computer. Apparently 2 drive does not start for some reason any. Is it possible to load the same programs off the internet?

  Thank you!

  copy content of all of your cs4 discs in a desktop directory.  Double-click the installer to the desktop directory.

• 8610 printer it's paper does not print

  My 8610 printer all in one, think it's out of paper.  I turned it off several times and rebooted my Pc. runnint windows 7.

  Hi mindy, sorry to hear you are having some trouble getting your printer doesn't work.
  
  There are a few steps, I recommend you. Even when the paper is loaded in the unit, it may not feed correctly if the paper in the printer driver settings need to be adjusted, or if the paper feed / pick roller is impure. You can read how to do these steps in Solutions 2 and 3 of this guide: LINK
  
  However, to perform a hard reset also to solve this error - you can do this by turning off the unit, unplug the power cord from the socket for a minute, and reinsert the power cord before turning the unit back on.
  
  Please let me know if any of these solutions helps. I want to help answer any questions you may have along the way.
  
  Forward to your response.

• Photosmart 7510 - will not print black on any parameter of photo paper (does not print on plain paper setting)?

  HP Potosmart 7510, printing from a memory card.  Using premium photo paper (glossy), set printer to print on HP Premium Plus Photo), printing out with Black/Brown areas in the blue-green instead of black.  Printing using plain paper, set printer on regular paper, just fine.    Same thing happens when I tried Advanced Photo and a Photo paper - print comes out with a blue-greenish cast in areas that should be black/brown.

  Tried to print a black and white photo - identical to all other attempts - if the choice of the photo options paper, the dark areas are blue/green.

  Comment - then try printing from the computer (wireless), produced the same result - black areas are printed in blue-greenish.

  Tried cleaning the cartridges, alignment printer, print quality status report looks very good.

  Door on this forum and general web search.  Nothing has yet solved problem.

  What should I do?  Any ideas/suggestions?

  Yes, this is the case on a 7510.  I worked on the answer.  Although "ink" diagnostice demonstrates both the black and the cartridges 'photo black' as being low, the 'black photo' was apparently empty.  The black of the photo must be called only because when the print properties are defined for the "photo paper", and when it is empty the black dark areas print in blue-green.  I thought that the black photo cartridge was a gray, for most thin shades grey, but maybe it's an intensifier of some sort.  It's a shame that HP does publish no real information.

• My officejet 6500 paper does not feed correctly (it folds upwards)

  Until recently, my printer worked fine. But after a previuos paper jam, the book will not insert through. She folds upwards instead of rolling.  I removed all the bits of paper that I could see. Say to check the wheel 'stars' someone can the help page tell me how to do this?

  I have ried cardstock through the diet. He took out a piece of crumpled paper, which had been jamming things up. If my printer works now.  So I no longer need an answer.

• Smart collection 'had adjustments' does not not in 4.3

  Hello

  In version 3.4 LR, I had no problem to apply this smart collection on a specific library folder by selecting the collection, and then pressure CTRL (Windows) while I click on the folder in question... which would filter all these pictures I edited in LR to this folder.

  This is not the case in LR 4.3.

  At the present time, this smart collection says I've got 8683 these photos in the collection and try the above method to filter only those published in a specific folder in the library, shows simply 8683 all pictures of my entire library.

  Any help would be greatly appreciated!

  Yep - Adobe changed ctrl-click on the smart collections and Union records instead of the intersection. (displays all the photos at a time instead of the collection criteria smart rental act as a filter in the file).

  A change I'm more unhappy about and am a little upset that Adobe is changing just the basic behaviors (revoke) that people have come to depend on when it seems that they could simply increase with new behaviors that cover the additional bases.

  R

• Collect in bulk does not print the results in the table

  Then the PL/SQL block below do not load and print whatever it is:
  
  -Database 11 g:
  declare
  Type (vr_Rec) is rendered
  DESCRIPTION VARCHAR2 (100)
  QTDE NUMBER (2));
  Type vt_Rec index vr_Rec table of Pls_Integer;
  va_rec vt_Rec;
  
  vc_Cursor SYS_REFCURSOR;
  
  Start
  Vc_Cursor open for 'SELECT "x" DESCRIPTION, 1 QTDE FROM DUAL UNION ALL' |
  "SELECT the"y"DESCRIPTION, 2 QTDE FROM DUAL;
  Loop
  Get the vc_Cursor collect in bulk va_rec limit 20000;
  When the output va_rec. Count = 0;
  End loop;
  Close Vc_Cursor;
  
  If va_rec > 0 Then Count.
  For / * everything * / i in va_rec. first... va_rec. last loop
  dbms_output.put_line (va_rec (i). DESCRIPTION | ' - ' || va_rec (i). QTDE);
  End loop;
  End If;
  end;

  lucitah wrote:
  Then the PL/SQL block below do not load and print whatever it is:

  Yes, this isn't. Look at the code. Each extraction replaces data read by the previous fetch. And since he finished when va_rec. Count = 0, we are left with empty va_rec. You need something like:

  declare
  Type vr_Rec Is Record (
  DESCRICAO VARCHAR2(100)
  , QTDE NUMBER(2) );
  Type vt_Rec Is table of vr_Rec Index By Pls_Integer;
  va_rec vt_Rec;
  
  vc_Cursor SYS_REFCURSOR;
  
  begin
  Open vc_Cursor For 'SELECT ''x'' DESCRICAO, 1 QTDE FROM DUAL UNION ALL '||
  'SELECT ''y'' DESCRICAO, 2 QTDE FROM DUAL';
  Loop
  Fetch vc_Cursor Bulk Collect Into va_rec Limit 20000;
  Exit When va_rec.Count = 0;
  For i In va_rec.First..va_rec.Last Loop
  dbms_output.put_line( va_rec(i).DESCRICAO || ' - ' || va_rec(i).QTDE );
  End Loop;
  End Loop;
  Close vc_Cursor;
  

  SY.

• Collected address book does not show. Book personal address only shows

  I need to delete old email addresses - the autofill makes me crazy. How can I access the collected addresses?
  The address book tab has only 1 pound, my address book personal

  You may need to activate the directory pane in the address book window.

  With the open address book window select display layout page-directory component

• My paper does not close

  How can I get my documents to close after trying to download a game on the internet? He has been at a standstill for two days and will not close. I ran virus checks and they have no effect on the situation. Thanks for the help!

  Hi SharonJumoke,

  1. what operating system do you use?
  2. what documents you try to close?
  3. What is the exact error you get when you try to close the document?

  Method 1
  I suggest you boots the computer for the safe mode with networking. the following link will help you to start in safe mode with network (click the advanced startup options in step 3 of the article).

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2
  Once you start safe mode, you must start the computer to clean boot, the following link will help you to start the computer to clean boot.
  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: Put the computer into normal mode.
  A. Click Start, right-click computer and then click on manage.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  B. in the console tree, click Services and Applications and then click Services.

  (C) in the part of details, right click of Windows Installer and then click Start.

  Method 3
  I suggest you to check in the observer of events and choppy back with the exact error message.
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer (Windows7)
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer (Windows vista)

• MS Solitaire collection, daily challenges does not not June 24 & 25

  For two days, after having chosen the daily challenges, an ad trying to open but never and then there is no way out other than to close the application.

  Does anyone else have this problem.  After the last patch that updates Tuesday, started for me.

  Hello

  I thank very you much for the update on the issue.

  I appreciate your efforts to solve the problem. It is good to know that the problem is solved.

  In addition to this, feel free to answer in the case where you are facing in the future other problems with Windows. We will be happy to help you again.