9.3 ACR output JPEG of the lot crashing if 'Save Options' (Graphics Processor acceleration disabled)

Similar Questions

• Error on Mac Pro GPU acceleration since the program crashed

  CC 2015 AI works very well for me the week last since the upgrade from 2014 CC. However, yesterday while working on several files (opened at the same time) the program crashed. After that, I have to disable "GPU Performance" while working, or I get the following error and the screen becomes white: 'Illustrator has detected an error with your material or graphics processing software and switched mode overview of the CPU for this session. Click on more information to resolve the error. »

  
  

  The only time where I do not see the error is if I create a new file. In other words, it crashes when I open an existing file. I gand around this by HAVE to quit smoking, reopening the program before turning off 'GPU Performance' before opening any files. Then it works fine, but of course, not with the GPU acceleration.

  It seems that the accident hit something that made the current files incompatible with the performance of the GPU.

  I trashed the prefs and reinstalled the program. Which made no difference.

  Have you experienced this? All the patches?

  Material:

  End of 2013 MacPro

  Dual AMD over-pants D500

  Double 20 "apple cinema Display

  Please apply the latest patch 19.1 this should solve your problem.

  -Ashutosh

• What happens in a batch file when you try to redirect the output of a command in a text file? How did it break the lot?

  I have a lot that downloads the files, and I want to redirect the output to a text file.  The lot is set up similar to the following:
  Set ftp = c:\ftp.txt
  hdir = Set / mydir
  Define ldir = c:\temp
  echo open monsite.org > ftp %
  echo user > ftp %
  echo pw > ftp %
  echo get myfile.txt > ftp %
  echo mget my*.dat > ftp %
  to echo bye > ftp %
  -I - s FTP: ftp % > "c:\temp\ftp.log."

  This lot works perfectly if I redirect the output of the ftp command, but, when I redirect the output, I get a logfile with 3 lines as follows:
  no connection
  mget my*.dat
  Good bye

  I tried the commands different redirect, with undesired results
  > & (which causes only the batch to close by anything in the logs)

  Why is - what this redirect would break the batch and the ftp script in particular?

  This is now fixed; was a simple mistake really, but thanks for all the help anyway.

• output signals of the rectangle a PEAK sine wave conversion

  Hello

  I have a question on the treatment of a PIC16F84 output signals. It seems that the simulation of Multisim does not work properly - but before I blame Multisim, I ask the community NOR or software engineers or a solution. Because I'm German, you are invited to continue this thread in German if it is allowed by the rules of the forum. If you need additional information to analyze my problem, I'll be happy to provide.

  The circuit itself has to convert "composition by pulse" signals "tone" (DTMF tones). So you can get old, classic phones work on new devices that do not support the "composition of pulse" more.

  The circuit is powered by the analog telephone line current loop line. The PIC is provided by a rudimentary voltage regulation and count pulse signals (voltage failures / power interruption on the telephone line). After that the captain means the series of impulses in their equal number (e.g. 3 pulses = number 3). The captain gives finally two signals with different frequencies to generate a DTMF tone (e.g. number 3 here is 697 and 1477Hz). As you can see in my PDF file attached, it works very well.

  Now I have to convert the rectangle wave given by the captain to an at least similar to a sine wave form - otherwise the device that receives the DTMF tones won't understand them.

  So I connected a low-pass filter at the output of the PIC. Now, expect the rectangle signal to be smooth in a way as the 'e-function' will (loading / discharging a capacitor through a resistor). But the results are very far from that - as you can see I have very strange curves.

  When I implemented a frequency generator with the same output signal as the PEAK and the low pass filter even I get curves as expected.

  So we can say that the output of the PIC works like a frequency generator in my circuit. But why does the filter not behave as it should?

  I've tried a lot of different values for the parameters of my RC-filter and simulation - this does not solve the problem.

  It would be nice if someone has any idea how to solve this problem.

  Thank you.

  The output impedance of the PEAK may be too high. May be that my car 50 output? Try scaling of impedance of the filter.  Do the 10000 ohms resistance and capacitor 10 nF.

  Lynn

• Additional output modules in the AE script

  Hello

  Is it possible to add extra output modules to an element of queue rendering using an AE script? I can't find the feature in the guide, and OMCollection is read-only so I can't add using standard table features.

  I need output modules additional on each element of queue rendering to render the plates for my CG Department - for example the default output module will be assigned a TIFF sequence high-resolution camera tracker, and the second output module will be assigned a sequence of half-resolution JPEG for the animation team.

  If this feature is not included, would someone please explain why?

  I develop in CS3 for the moment, but the target version is CS5 to work - I have not double-checked the release notes yet but do not remember it is added after the CS3.

  Thank you, Christian

  This is the key:

  myRQItem.outputModules.add ();
  myOM = myRQItem.outputModule (2);
  myOM.applyTemplate (myOutputModule2);

  Dan

• Output meter, at the request

  I would like to have a counter to a single output pulse whenever an incident occurs in a loop. My current solution (in pseudocode; I'm using LabWindows CVI on an RT target) looks like this:

  DAQmxCreateTask (...);
  
  DAQmxCreateCOPulseChanTime (...);
  
  While (true)
  
  {
  
    If (condition)
  
    {
  
      T1 = Timer();
  
      DAQmxStartTask (...);
  
      T2 = Timer();
  
      DAQmxErrChk (DAQmxWaitUntilTaskDone(*th,2));
  
      DAQmxErrChk (DAQmxStopTask(*th));
  
    }
  
  }
  
  DAQmxClearTask (...);

  Unfortunately, the time between t1 and t2 is at least 0.142ms and sometimes 2ms is there an elegant way to reduce this and do not have to call the StartTask again and again?

  Thank you

  Jonas

  You should get an improvement by committing to the task before your loop:

  ...
  
  DAQmxCreateCOPulseChanTime (...);
  
  DAQmxTaskControl (taskHandle, DAQmx_Val_Task_Commit);
  
  While (true)
  
  ...

  If this isn't good enough, you could try instead using a task of digital output (start the task before the loop, write twice inside the loop - high then low - whenever you need a pulse output).  If the pulse width needs any kind of accuracy at all you want to use the digital output task to trigger an output meter (start the meter before the loop task and configure it to be "redeclenchables" so you don't have to restart several times in the software).  I don't know whether or not it will actually run faster without benchmarking it.

  Best regards

• Generate a digital output that indicates the frequency of half of the contribution

  Hi, I'm new with data acquisition. I would like to get your help.

  I have a digital signal input that is generated by an encoder. I would like to generate an output signal of the way that his level of signal will change at each edge of the awareness of the input signal so that the frequency is half that of the entry.

  I would like to know how to do this using the NI DAQ M 6221 map.

  Thanks for your help

  

  Hardware solutions can be so simple... sometimes I prefer an iron solder wire

  Look at the section counter...

  I think there's a prescaler/separator for the meter... and the next would try to drive the output to a PFI

• Outputs produced by the analog input job Retrig delay counter

  Hi all!

  First of all, I want to thank everyone on this forum who take the time to answer the questions, this forum has been invaluable to me.  I have a question about delays in adjustment to the pulse output of a counter, like what is described here.  My question is related to another, asked hereon the trigger of an analog signal and producing a pulse for each triggered event.  I have this job and can be seen in the attached vi.  Basically, now I'm able to produce a TTL pulse whenever my analog signal passes a predetermined threshold.  I have also documented the vi to my best understanding, if I have something wrong in the documentation, please let me know.

  In any case, now that I have a pulse at each outbreak, I would like to be able to adjust the delay of events so that the pulse is not produced until the period n/20 (n = 0, 1, 2,... (19) what I expect to see is a similar pulse train in 'fig. 2' in the article, where the white pulse is the counter pulse, and the pulse red would be the same as my analog signal.  So, for example, if I had a 281Hz signal, I want to produce a single pulse with a width defined by the user whenever my signal crosses a threshold (it's zero delay: 0/20); This part may be made using the vi attached to this subject.  Now I want to delay this impulse as to each trigger event, a pulse is not produced until 1/20 of the period, or 0,000178 seconds after the trigger.

  Looking at my vi, I think that if I change the output channel of the meter to 'CO Pulse Time' and then set the respective initial delay, time and little time, I can get delayed impulses mentioned in the article.  Correct me if I'm wrong, but I think that basically 'big time' controls the pulse width. 'initial period' is what controls how long to wait after the first trigger event is reached, before generating a pulse, but this applies only to the first impulse and not the rest; and finally 'small time' is the time to wait before the next pulse is created.

  Earlier today, when I use the CO Pulse Time option, it seemed to work properly for me to a certain degree.  At low frequencies the impulses seem to trigger to each event when the pulse width is set at 2.5% of the period.  When I tested at 281 Hz with a pulse width, 'big time' of 0,000089 sec and without anything wired for the 'initial delay' or 'small time', the impulses seem to ignore systematically each triggers 2... that tells me that something is wrong in my settings, rather than problems with the sample clock.  So I decided to connect '0' to 'small time', but then I got an error message indicating that some time may be less than a value (I forgot what the error message).  So I concluded that I must not understand what these terms mean.

  Sorry for the long explanation, but I really need help with this.  So let's say that the first set of data, I want to acquire is at zero delay, such as pulses are generated at each triggering event like how I have my VI now; so, for the next set of data I want pulses to generate 0,000178 seconds after the trigger threshold; so, for the data set third, I want to pulses to generate 0,000356 seconds after the trigger threshold; and so on... How should I do for this?  Thank you very much!

  Hello!

  Please post on the Forums OR! I think the main issue here is that you are sampling not fast enough to catch all of your high. So you set your high dry 0,000089. You will need to substantially increase the frequency of sampling in order to catch all these. Something around 25 k should do the trick.

  To the extent where using the time counter Pulse, you're totally on track. I think that the use that the delay will do the job.

  I hope this helps! Let me know!

• How can I add text to photos save to JPEG? The photos have been imported into my computer from a mobile phone

  How can I add text to photos save to JPEG? The photos have been imported into my computer from a mobile phone

  Hello

  What operating system do you use?

  You can use the paint on windows feature to add text on the pictures.

  Reference:
  http://Windows.Microsoft.com/en-us/Windows7/products/features/paint (you can also use this article for windows vista)
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/app_paintbrush.mspx?mfr=true
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/mspaint_overview.mspx?mfr=true

• List of input values (multi-column) must return the output text once the value is selected

  Hello

  I am trying to achieve conditional:

  I create a searchVO(select '' empNumber from dual) - to accept the input value (name empNumber).

  I create empLovVO (select enum,ename, addr, city of emp). lov attached to empNumber (searchVO).

  In the list of values when I select a value (emp 1, a, xyz, abc), it must return the default aby associated with emp values 1 to my output texts

  the name of the EMP one.

  addr xyz

  City abc

  It should also automatically change the values if I select another empNumber.

  Please let me know how to achieve this.

  
  Thank you

  Firstly, for the searchVO, add a three other attributes, name, address, and City, the type of string:

  

  and make sure they are still editable:

  

  Then, you're mapped LOV enum attribute EmpNumber, right?

  Do similar for the newly created attributes, in the list of values dialog box validation:

  Ename--> name,

  --> addr addr,

  City--> City

  

  Then, just to show these attributes in the form of output text, and you'll get what you want...

• What is the best way to deliver the WebHelp output files to the development team in TFS?

  I use RoboHelp 2015 to generate WebHelp output.

  The development team want me to archive files in TFS so that they can pick up the files and integrate them into the build.

  I'm looking for some best practices here because I'm running into some issues whenever I try to check the files back in. For example, I need to manually track the files I added/renamed/deleted in the HR project.

  We discussed the following options:

  • Delete the contents of the WebHelp output folder in TFS whenever I want to check in new files.
    • This works, but doesn't seem to be a very elegant option.
  • Zip the contents of the folder of WebHelp output and archiving/retrieval of this file
    • This works well for me, but the devs have create a separate process to unzip the file whenever they generate a release, they don't care.
  • Check all files in the folder, overwrite the files with the new files, manually add the new files and then check back in.
    • This job very well, but it requires you to manually add the files whenever you check in and also leaves / the legacy of old who were removed from the HR project.

  Someone at - it other ideas about how to do this?

  Any help would be appreciated.

  James

  Hello Mack,

  I think that the decompression of a file is a very simple action to add to a build process, it is perhaps the best way to go. But there are other options as well.

  You can check in sources in TFS and use RoboHelp with source code control. Then you include RoboHelp in the build process so that the latest sources are retrieved from TFS and aid is generated on the server. A nice solution, but still work to implement. I like this solution because I do not store an output is very useful. As long as you have the sources, you can always create new output.

  For developers, it is easier to just add all the files output in a specific folder. And you can automate this option for yourself as well. The TFS and RoboHelp can remotely control from the command line. Meaning that you can create a batch (1) file generates output from RoboHelp. (2) deletes the current aid of TFS. (3) add the new output 1 to TFS. (4) checks in changes in TFS. A single file can automate everything for you. I have used this method in the past, and once it is implemented, there is virtually no maintenance for you.

• I need to save it in JPEG format - when I try to "save under" is has the Image of Adobe Stock, even if I have a license it - any suggestions?

  Photo I have a license is a .eps file and I need to save it in JPEG format - when I try to "save under" is has the Image of Adobe Stock, even if I have a license it - any suggestions?

  Hello

  I advise you to talk to the support by call/chat because they will be able to help you.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena

• I would like to deal with the psd files for pdf files with Photoshop 2015 CC of the lot

  Have Photoshop 2015 CC would like to process files psd to pdf files in batch bridge, can't get output module to work tried all bridge for bridge to get to work, he used.

  You could combine the batch script and a simple action to save to the PDF format. Open a file and create the action.

  Make a new series:

  

  Do new action:

  

  The action should be save. Now save your file to PDF and stop the action.

  Go to the bridge and select the files you want to convert, and then go to tools > Photoshop > batch. Set as the screenshot shows:

  

  Benjamin

• After running sql of the lot, it is disconnected

  Hi all

  I wrote a batch program to run a pl/sql procedure. But after running, it disconnects.

  But I want to continue in the same session

  echo exec tracer.trace_pck.start_('alter session set sql_trace=true') | sqlplus hr/hr
  

  Output:

  Press a key to activate tracing

  SQL * more: Production of liberation 11.2.0.2.0 Thu Oct 10 15:59:56 2013

  Copyright (c) 1982, 2010, Oracle.  All rights reserved.

  Connected to:

  Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production

  SQL >

  PL/SQL procedure successfully completed.

  SQL > disconnected from Oracle Database 11 g Express Edition Release 11.2.0.2.0.

  Production

  Trace enabled successfully. Press a key for entry you sql

  If you use a batch file, I assume you are using windows OS.

  Essentially, what you need to do is call a sql file in the batch file and then download the sql file to call all the other files.

  Batchfile test.bat file test.sql sql calls

  sqlplus /password @test.sql

  test. SQL calls test1.sql and test2.sql and stops

  @test1.sql;

  @test2.sql;

  "exit";

  test1. SQL displays the current sid and serial No. FRO our name and our session

  Select 'test1', sid, serial # in session $ v

  where audsid = userenv ('sessionid');

  test2. SQL displays the current sid and serial for our name and our session No.

  Select "test2", sid, serial # in session $ v

  where audsid = userenv ('sessionid');

  When you run this you get t output similar to the following: (your SID and serial will be different)

  ' TEST SID SERIAL #.

  ----- ---------- ----------

  771 97 Test1

  ' TEST SID SERIAL #.

  ----- ---------- ----------

  771 97 test2

  It shows two separate sql files have been called, but are always in the same session

• How to get/keep the lots that are not commit UCM of ODDC?

  Hello
  
  We had users using the ODC in the past where a lot will not leave the queue until it is well checked in the Complutense University of MADRID.
  
  Now, we are in the process of implementation of ODDC.
  
  In ODDC, you could see that a batch is submitted by a user through the webpage webcapture; the user always sees a successful presentation of the lot.
  The batch is then delivered as one. PAK file and sent to the server the ODDC.
  
  Error during validation to the Complutense University of MADRID, the batch is kept in the engine of the ODC as seen by Batch Manager.
  But we could not find a way for the current user or Admin user to correct the index values , or return the package.
  
  Is there some features we are missing or do not know?
  
  Kind regards
  Prateek

  Huh, there is no such thing as stupid questions, sometimes only answers are not clear enough. I should explain in more detail.
  I meant that you can manage batches that failed with the Capture of Document Oracle on the host machine, where it is installed installation ODDC (thus likely on server). Unfortunately, there is no way to manage the lots per page WebCaptureAdmin of the ODDC and no batch management can be done through the ODC. Basically, you need to configure ODC because it will be used for indexing of documents with the same parameters as in the ODDC. I was under the impression that you have ODDC installed on top of the existing installation of the ODC. You can always install on each other while taking care not to reset the database. This way, you have all the features.

  In the ODC, you had to put in place the .cab files etc. before being able to use the web client ODDC and WebCaptureAdmin to create profiles of scanning with indexing. If did not, create the profile of indexation in the ODC. Assign the same workbook used with scan ODDC profile to this profile. Like many other scan profiles/workbooks in ODDC indexing as many profiles I ODC. In this case, if fails validation of batch will be waiting indexing interface ODC under indexing profile name. Not the easiest way, but it is the only one I know.

  Kind regards
  Boris