9 48 code came when I tried to update windows update

Similar Questions

• Recently replaced hard drive and ram, when I tried to activate Windows Vista Home Premium says the code has been used, how to fix this?

  I've recently updated my hard drive and ram, and when I tried to activate Windows Vista Home Premium, but got an error that says that he was already in use. I had used the code until I replaced the hardware, how to activate it on my new equipment?

  You can reactivate your Windows Vista installation by doing the following:

  1. click on the Start button and in the box, type search: slui.exe 4

  2. press the Enter key on your keyboard.

  3 select your country.

  4 follow the instructions for the activation of the telephone (toll-free).

• code 0x80072f8f when I tried to activate win 7 ultimate

  code 0x80072f8f when I tried to activate win 7 ultimate

  Hi Claudiuburloiu,

  Error: 0x80072f8f occurs usually when your computer time differs from the time zone that you belong.

  I suggest to follow the steps below and we update on the State of the question.

  
  Method 1: Verify and adjust the date and time settings.
  To do this, follow these steps.

  1. Click Start, and then run.
  2. In the Open box, type Timedate.cpl, and then click on OK.
  3. Under the tab Date and time, make sure that the date and time of the computer are correct. If the settings are incorrect, adjust to the correct date and time.
  4. Click OK to close the Date and time properties dialog box.
  5. Try to activate your operating system and check.

  If the method above does not work, proceed to the next method.

  Method 2: Refer to the F, G method from the following link and check if this solves the problem.

  Error message when you try to activate Windows 7 or Windows Vista: "an error has occurred."

  http://support.Microsoft.com/kb/931276

  If you have additional questions, or if this problem persists, come in and we will be happy to help you.

• Ox80240031 error message came when I tried to download 8.1

  I can't connect to Windows Store (I have Windows 8) therefore impossible to download 8.1 Windows or any application store (I've tried several apps and same error message came).   Ox80240031 error message came when I tried to download 8.1

  Computer recently crashed, previously had had no trouble to download apps and 8.1.  Now new hard drive and motherboard.

  Separated from: https://answers.Microsoft.com/en-us/Windows/Forum/windows_8-performance/ox8086000c/69a57a4b-a5f1-4278-8a5d-8941bee563d9

  Hello

  Before the update to Windows 8.1 did refresh you your PC?

  Are all important updates installed?

  Try the Karthick Vengaloor

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-windows_install/error-ox80240031-when-downloading-Windows-81/21ddd3be-491C-44D0-9B50-01adf302734a

• I get the error code 80246008 when you try to update.

  I get the error code 80246008 when you try to update. I tried everything to repair windows at the attempt of essential security analysis of windows. Yet its does not work and I can install updates or download microsoft windows. can anyone help?

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80246008

  This should help.

• I get code 643 when I try to update what I'd do

  I keep getting code 643 when I try to update, what do I do?

  Hi HelenYB,

  1. the updates you are trying to install?

  This error occurs usually when updates .net framework could not install

  You can try the steps in the following article and see if it helps.

  You receive the error 0 x 80070643, error code 0 x 643 or updates may be offered again when you try to install the .NET Framework updates when you use Windows Update or Microsoft Updates

  Hope this information is useful.

• A 0x8020002e error when I tried to update the pre-installed applications

  Original title: 0x8020002e

  Hi Microsoft supports,

  I met a 0x8020002e error when I tried to update the pre-installed in my laptop windows applications 8.

  There is no problem with my wifi connection as I can easily browse the web and download applications through internet.

  I tried to search for solutions on the web, but all suggested do not work.

  It is a common problem among all users of windows 8 and we really hope you can provide us with the fix.

  Thank you.

  Try this suggestion.

  Windows 8 Store Update 0x8024001E error code
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_cp-windows_store/Windows-8-store-update-error-code-0x8024001E/49820d2a-241e-471e-89F4-7b5440bb8abf

  The poster means Windows key + X when he mentions "Activate Windows + X and turn on the command line (Admin)".

  -What are you connected to a Local or a Microsoft Account account?

  Introduction to Windows 8: If you use a Local account or a Microsoft account?
  http://www.7tutorials.com/introducing-Windows-8-should-you-use-local-account-or-Microsoft-account

  See if the program can diagnose any problems and fix them.

  Download and run the troubleshooter modern UI App and check.
  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  What to do if you have problems with a soft
  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Try to clear the cache of Windows Store:

  On the screen, press Windows + R key to open the Run dialog box.

  Type WSReset.exe and press ENTER.

• It gave me the error I already had a flavor different from windows essentials construction when I tried to update to the basics of windows 2011

  After trying to install windows essentials 2011 they gave me the error that I already have a taste of different construction of windows essentials and advised to uninstall the version, I already had. However, when I tried to uninstall windows essential that he would not completely uninstall and so I got the same error again.

  Hi jess.lewis7,

  The question you have posted is related to Hotmail and would be better suited to the community of Windows live.

  Please visit the link below to find a community that will support what ask you:

  http://windowslivehelp.com/product.aspx?ProductID=12

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• lost games preloaded maps that came when new. I have windows xp.

  Original title: lost games?

  my program has lost games preloaded maps that came when new. I have windows xp. where can I get a download to replace these files?

  I found a related thread that responded to my problem.

  Thank you

• I have error code 8024200d when you try to update and install SP1 for Vista

  I have error code 8024200d when you try to update and install SP1 for Vista. I'm currently running Vista Ultimate. Any help would be appreciated.

  Thank you!  Matt

  Matt,

  The 8024200d result code indicates WU_E_UH_NEEDANOTHERDOWNLOAD
  Update Manager did not install the update because it must be downloaded again.
  Suggest you download and Save the complete stand-alone package of Vista SP1.

  Links to the standalone versions are on this page because you validate that the edition of Vista is x 86 (32-bit) or x 64 (64-bit). You can see the architecture of the system of opening in the Panel and next to the search System system type: Windows Vista Service Pack 1 (SP1)

  Before attempting to apply the SP1 please consider this information-

  If you choose to install Windows Vista SP1 via the standalone installer available on the Microsoft Download Center, Microsoft recommends that you first check Windows Update and install all drivers in option. Read the Articles in the Knowledge Base 948187 and 948343 for more information.

  Suggest you to create a folder on the root drive (the drive where Windows is installed, usually C:\) and name SP1.
  Move the downloaded Service Pack in the newly created folder.
  Disconnect all the devices, printer, external USB hard drive, etc.

  Then, Configure the system starts in a clean condition
  After you restart the worm as a clean boot, apply SP1.

  If there is still a problem with the installation of SP1, MS offer support chat and free e-mail to "help you to download and install service packs" here-
  Microsoft technical support

  Or, you can post here - MowGreen Windows Vista Service Packs/Windows Server 2008 Service Packs Windows IT Pro - consumer safety Expert

• I get the error code 646 when I try to install windows updates.

  I get the error code 646 when I try to install windows updates. I have Windows Vista Home Premium. I disabled my firewall and I still get the error code 646.

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• constant error code 646 when installing office 2007 updates

  I get the error code 646 when installing office 2007 updates. I had this problem for at least a month and it is quite frustrating.

  Can someone help me please?

  CF. http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6e716883-7af4-4a9f-8665-2f4dd57eee8d

  (That you posted a response to this thread, I presume you have read the RESPONSE messages). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• IS PowerShot A4000: My computer does not recognize my camera when it is connected, saying "Windows cannot op.

  IS PowerShot A4000: My computer does not recognize my camera when it is connected, saying "Windows cannot open the device because the configuration (in the registry) is incomplete or damaged". This a recent phenomenon. I reloaded the latest Camerawindow software nothing works. Recommendations to solve this problem?

  Problem solved. Recommendations by e-mail has helped. I had to use 'Device Manager' from the Vista Control Panel for adding new hardware. I also need to add a new driver. The Kodak in Windows Vista camera driver worked. The camera is now recognized. Thanks for the help.

• Receive the error code 0 x 643 trying to update. Not sure why they don't is not loading?

  Receive the error code 0 x 643 trying to update. Not sure why they don't is not loading? Tried to look at the code but nothing helped. Any suggestions?

  You can watch the following article to see if this will help with the error 80070643.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643>

  UTC/GMT is 15:50 on Sunday, August 19, 2012

• I am still getting error code 8004ff83 when you perform the update

  I am still getting error code 8004ff83 when you perform the update

  I read that in safe mode, it would be possible to do the update. What is safe mode?

  Hello

  Perform the steps from the link below and check if the problem persists.
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
   
  Hope this information helps.