9 PE stopped printing with the error message
I have a few recently edited PSD and JPEG equivalents such as I have printed successfully a couple of days. When I tried to print additional copies yesterday it through the process went well up to the point of clicking on PRINT. The box "print...". "is come at the same time with box 'Could not print because of a program error xxxx', a blank page was sent to the printer and the button PRINT is still greyed out. Same for both JPEG and PSD. I uninstalled and reinstalled PE9 - no change. Any suggestions?
Problem solved. My color correction file was corrupted or lost. Re-calibrated my printer (ColorMunki) and it works again. Must not forget. 1 out of 10 to Adobe for the useful error messages
Tags: Photoshop
Similar Questions
-
I'm so fed up with the error message that adobe flash broke down.
I'm so fed up with the error message that adobe flash plugin has crashed. You got two years, in order to solve this problem, and all your proposed solutions do not work. I see no alternative but to return to Internet Explorer. It's so frustrating when I check my emails and click on a link to get the same message over and over again. Why did this problem occurs only with Firefox? It is not the case with Internet Explorer and it is not the case with Google Chrome. Otherwise, Mozilla Firefox is great.
This from Halofromsue copied here:
Well as I said in my last post, yesterday I disabled Shockwave in Plugins. However, as you know, you need shockwave and flash for most things... so I went back and set it to say "ASK to ACTIVATE" so when a web page loads and he needs, he will ask, and then I will either say 'Yes' or ' ' and that seems to work. So far, after three hours, it has collapsed and shockwave/flash all work fine when she needs.
Me: it works!
-
Satellite Pro M10 will not start again and comes up with the error message
My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.What can I do to get the notbook again reboot?
Hello
Seems that there are problems with the files of GoBack.
Try to boot in safe mode and remove the Norton System works from your laptop ;)
If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs
Good luck
-
Hi, whenever I turn on my laptop, I get now bombarded with the error message that says... The application or DLL C:\PROGRA~1\Google\GOOGLE~2\GOEC62~1.DLL is not a valid windows image. Please check this against your installation diskette. This message appears every time to load something like yahh or msn etc? Any help on what caused cela or how to solve this problem would be highly appreciated. Thank you
Try to clean the temporary Internet files...
-
Hello
My attempt to connect to hotmail account fails with the error message "this domain Services have been abandoned. The problem persists in all web browsers. I'm unable to open a session (* address email is removed from the privacy *) which I've used for more than ten years, and I can't afford to lose. The problem started today and I don't know that I ever change any setting in my PC.
Can someone help me with the first note.Thank you.Raj KishoreE-mail address is removed from the privacy *.E-mail address is removed from the privacy *.Hi Rajkis,
When you use Windows Live Hotmail and the problem you posted is with Windows Live, so it would be better suited in the Windows Live community. Please visit the link below to find a community that will provide the best support.
Windows Live Solution Center Hotmail Portal
http://windowslivehelp.com/product.aspx?ProductID=1
I hope this helps.
-
Original title: Facebook game of pyramid solitair saga, error mesg
I receive a message [uncaughterrorEvent "bubbles = true cancelable = true even + phase = 2]. I hit the SPACEBAR to enter a play or to get a total. Can anyone help?
Hi tipsy,
Thanks for posting your question in the Microsoft Community.
I understand that you can not play the lonely saga Facebook game pyramid correctly with the error message: uncaughterrorEvent "bubbles = true cancelable = true even + phase = 2. Correct me if I'm wrong.
I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
Please follow the steps in the link if you are using Internet Explorer and check with the question below:
The problems of games online using Internet Explorer:
http://support.Microsoft.com/kb/2528246
Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
If the problem persists, you can contact Facebook support to improve assistance on the issue of the links below:
Facebook Help Center:
http://www.Facebook.com/help.php
Contact Facebook and Facebook support:
http://www.Facebook.com/help/220217228006012/
Facebook games help:
http://www.Facebook.com/pages/games-help/165498566811429
I hope the above information helps you and your response is very important for us to ensure a proper resolution.
-
The flame of my BB, cutting its call after every 1 hour with the error message: forbidden outgoing calls (8 CC). except the active calls, isn't she the netwrk...?
Hey pemba.
Welcome to the community of BlackBerry Support Forums.
Thanks for the question.
I would first check to see if you are using the latest version of the software of your network service provider. Go to www.blackberry.com/update or open BlackBerry Desktop Software. If the software is up to date, I would check with your provider network for more investigations.
Let me know if you have any questions.
See you soon.
-
Hello
I have PC and pay monthly. We are a small company.
Question 1: For two years I have a full subscription to Adobe all programs. But the other day I would open an another user InDesign documents and could not open this with the error message: "the document is done a new version than my version of InDesign. How should I do to upgrade my version to a version more recent?
Question 2: I already have a license to use the software on two computers. Am I not allowed to use the same version I've taken down on adobe.com til two computers or terms here.
Sincerely
Stefan Svensson
Hello
Please see update requests in your desktop CC application.
CC Adobe license can be activated on 2 machines using the same Adobe ID, but only one at a time.
Reference: licenses and terms of use | Adobe
Kind regards
Sheena
-
All of a sudden my 5.7 LR on win10 64-bit start fails with the error message something like "error reading from the cache of the preview... Please restart." reboot, repair, reinstall, or rename SLCache helps to repair.
Hello
Greetings!
Close to Lightroom.
Navigate to the location where the catalog is present (default value is within the pictures folder lightroom file)And delete the file previews.lrdata.
Note: do not delete the catalog with the extension .lrcat file.
Concerning
Jitendra
-
When I try to install adobe photoshop 13 on my computer it comes up with the error message error code "this installer does not setup on a windows 64-bit operating system support" 6. How to I recify this? TIA
You can try to download the 64-bit version. You can download the demo version of the software through the page linked below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html
-
When my printer stopped working because of error messages about "printer cannot communicate with the computer" (from "twisted into the USB pins?), I tried to change to 2nd USB port without success. I tried a new cable; that did not help.
Then I uninstalled and reinstalled my Lexmark printer and changed the error message. Now, the printer does not work because "the USB device is not recognized."
I tried to update the chips; Use 1 USB port; and using the old cable, all this without success. I checked the connections of the cable to the printer and the PC and turn on the printer and goes off; I'm out of ideas. Any other suggestions?
Hi ChristineKrause,Here are some links that might help you:
Advanced troubleshooting tips for General USB for Windows XP problems
Try the steps listed in the items mentioned above and see if that helps you solve the problem.
-
Explorer stops with the error message
While in Explorer thumbnail view lookig to a folder containing .avi and .jpg files explore suddenly freezes and comes up with an error message:
Error signature is:
ModVer: 2.9.0.0 Offset: 00002847 >
When I click
in the window of error, evrything disappears from the screen except the wallpaper, then after awhile evrything is back (except explorer) Maybe this:
http://support.Microsoft.com/kb/822430
writing in the new message: * e-mail address is removed from the privacy... * While in Explorer thumbnail view lookig to a folder containing .avi and .jpg files explore suddenly freezes and comes up with an error message:
Error signature is:
ModVer: 2.9.0.0 Offset: 00002847 >
When I click
in the window of error, evrything disappears from the screen except the wallpaper, then after awhile evrything is back (except explorer) -
Original title: Create Restore Point will create new not a point of restoration after upgrade to Vista Ultimate in Basic
I get the error message. "Mgr. task is damaged or has been tampered with. 0 x 80041321."when I try to create a new restore point manually. But it appears automatically when I do a backup of files and when I planned for it, for in the system settings. How can I fix this problem
HelloThanks for posting your question in the Microsoft Community.I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
Please follow the methods and mark the question below:Method 1:I suggest you try the steps mentioned below.Steps to re-create the Task Scheduler:
a. Click Start; in the start search type regedit.exe and press ENTER.If you receive a consent prompt, click Yes.
b. navigate to the following location.
HKLM\Software\Microsoft\Windows NT\Current Version\Schedule keys and remove its subkeys.
c. save the changes and then close the registry editor.
Now check if the Task Scheduler works.WARNING: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:
Method 2:Step 1:I first suggest you to check if the Volume Shadow Copy service is running.a. Click Start, type Services in start search. When the page is open, look for Volume Shadow Copy service.b. right click on the Volume Shadow Copy service (VSS) and check whether it is started.
c. If it is stopped, select start or restart.
Check if you can try to create restore points after starting the service
For more information, see the following link:Step 2:
If you have installed a third-party security software, then try to temporarily disable the security software and check what is happening.Disable the antivirus software:
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-softwareImportant note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.Step 3:You can also try to remove the job from the location:C:\Windows\System32\Tasks
How to find which task is damaged or altered.a. Click Start; type cmd in the start search. List programs, right-click on cmd and run as administrator.
b. now run the following commandschtasks/query | findstr /i
SearchERROR: The task image is corrupt or has been tampered with.
ERROR: Task cannot be loaded: the task nameFind the name of the task, try deleting the task name, and then try to recreate.See the link below that solves your problem.
a. Click Start, type Task Scheduler in the start search box and then click on Task Scheduler in the list programs.If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
b. the component shares of the Scheduler dialog box, click on create a task and check.
Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly. -
Satellite Pro L series starts with the error message
Someone played with the BIOS or whatever on my laptop.
Now, I can't get beyond the log in screen safe mode (black and white) and the error message that oxoooooo7b OXF7A8E63C OXC0000034 rises.
I can not find discs to reboot or something else and don't know what to do to solve the problem.
Any help will be most appreciated, because I'm really at a loss for what to do for the best, that I don't know much about computers as of how put the right problems like this.
Hello
You can try to repair the system.
Switch on and press F8,
Now, you will see the advanced boot options:
Here you can choose the option: last known good configurationIf this option does not help, restart the device and press F8 again.
Choose the first option: fix my computer
Here, you can choose between different options.
You can enable Win 7 to find the problems and fix automatically or you will use the Toshiba HDD recovery option to restore the entire system. -
RnR of restoration with the error message
Hello world
I'm a newbie here in this Forum. I hope you can help me with this problem. We have a portable X 210 with Rescue and Recovery 4.3 installed. The hard drive crashed on the weekend and the user has brought it to me. It also has an external hard drive with the last backup (5 August) on this subject.
We have replaced with a new hard drive and ran the restore utilities. I chose the option "Restore individual files", he scored all of the contents of the old drive (files & and folders on drive C). But when we clicked on restore, it failed with the message "cannot restore files...". C:\xxx. Contact your administrators.
I tried different stages as boot think advantage RnR (F11), boot on the external hard drive are and you try to restore the files to different targets (drive C, place of origin, other external drives)... all failed with the same message above.
I called support and they won't help me because the warranty is out. I hope someone here can give me an indication of what the error is and tips to get some important files back. Really appreciate your help. Thank you.
Maybe you are looking for
-
Just started having this pop up. What should I do?
-
Windows Vista has problems to install the update for Office home and Student 2007
I can't widow vista to install an update for Microsoft office home and Student 2007. I have to uninstall and reinstall the program from the cd that came with my pc and that has not worked. Can you tell me why I have a problem with it.
-
Windows has recovered from an unexpected shutdown.
I have a laptop Dell Inspiron (1440) running under Vista and often get the message "windows has recovered" when I start first to the top. Recently, I was not able to get anything on my screen despite the white power light being on. I could not turn o
-
Fill PDF forms with LiveCycle Designer - "Permanence" of technology
I like to PDF using LiveCycle Designer Forms. I want to use with the organizations, I work to make the forms to fill out. But I fear that the forms "break" more easily than the Acroforms. Generally - is this concern of mine?-If I have a subform in
-
Hi, I use jdeveloper 12.1.3 1.1. I request ADF, master form Panel and secondary table.2. by default create insert button is enabled in the secondary table. ( button)3. no data is demonstrated at the start and it's ok because the main table of the for