9211 with new support files
Hello!
I'm learning module 9211 and I used the start-up 9211-example and it worked but readings had been arrested with two degrees. Then I found this: http://digital.ni.com/public.nsf/allkb/AAEC7BF96A019EFB862570E4006D9204
I downloaded the file, replaced by the old library and tried again. Now it doesn't work at all. There are conflicts between the screw and when I am in the process of re - compile and wants to save the project, I havn't had access to save her.
After some time (not more than) I managed to make it work, but the result was so raw data. This library works at all?
Kind regards
Tim Jansson
OK, let me know how it goes.
Best regards
David
Tags: NI Software
Similar Questions
-
Break a file .rtf with new names
Hello
I have a huge rtf file which I hope to break in different files based on an identifier that is at the top of each part I want to break up.
These files should still be rtf as they all html links I need to keep.
The structure of the file is:
3 RETURN of CART then the word MOVIE (uppercase) or a CARRIAGE RETURN following.
The identifier to break the file must therefore this sequence.
And after the word FILM and a carriage return, I have the actual film title, ideally I would like to use the title of the film as the new file name.
Many thanks for any help
Hello
This script works on the tested document being the application "TextEdit" on EL Capitan.
The format of the new document must be "RTF" (not "plain text") in the preferences "TextEdit".
-----------------------------
the value of the path to the folder on the desktop folderPath as string - the destination folder where to put the new RTF files
-Choose the end of the line of text (the carriage return or line feed) RTF
RC for return - value <-carriage return
-the value of rc linefeed - <-line break
the searchString 'MOVIE' & rc value
Tell application "TextEdit".
say (get before document)
the value of tc to count points
start_Line value 1 - the line of departure of the first part
in view of the case
Repeat with i from 1 to Transport Canada
If (get the paragraph I) = searchString then -'MOVIE' and carriage return
If (get paragraph i - 1) (get paragraph i - 2) and rc is rc then - two blank lines before 'MOVIE' (carriage return), and carriage return
the value movTitle in the paragraph (i + 1) - get the title
say movTitle to if it ends with rc and then assign movTitle text 1 thru-2 - remove the transport back in the title of the film
My newRtfDocAndSave (start_Line, i + 1, folderPath & movTitle & ".rtf", it)
value start_Line i + 2 - the line starting from the next part
end if
end if
end repeat
end in view
tell the end
tell the end
on newRtfDocAndSave (n1, n2, f, tDoc)
Tell application "TextEdit".
the value of newDoc to new document
Duplicate (paragraphs n1 by n2 tDoc) in the first paragraph of the newDoc - part copy rtf text in the current document to the new document
close newDoc save Yes save file f - save and close the new document
tell the end
end newRtfDocAndSave
-
HY everybody
a question - I just bought the new camera canon 5 d mark 4. the latest version of lightroom/photoshop is not able to read these files again. When will it be delivered an update to read the 'new' raw files normally after a release of the camera? within a cuple of days? weeks? month?
concerning
Fabian
Hello world
6.7 Lightroom and Lightroom CC (2015.7) are now available and it includes support for Canon EOS 5 d Mark IV.
Please upgrade to the latest version of Lightroom to help > updates menu.
Release notes:-Lightroom CC now available 2015.7
Kind regards
Assani
-
Where Iget can help with this message? «Adobe Acrobat Reader DC could not open (my file.xls) because it is not a type of supported file or because the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly decoded).» I don't know where to go or how to solve this problem. It started to happen after I went to the office 356 and uses Windows 10.
Please see the troubleshooting provided in this KB doc steps: fix damaged document error when opening PDF files
Let us know if you still experience the problem.
Kind regards
Meenakshi
-
I've just updated my LR, but still can not read the new RAW files of my brand new Sony a6300. said 'impossible to read these files' is Adobe should update it program with new firmware to manage these new folders? Or something escapes me?
You updated Lightroom to version 6.5? This is the version you need. What is the exact wording of the message you receive?
-
I have 12 items but camera raw does not work with New York nikon d810 does support elements 14 raw d810 nikon camera
bavarian1 wrote:
I'm sure that my computer is up to the task, but I don't always have the answer No 14 elements camera raw support the d810 nikon?
John
I told you in my first post "in short, PSE14 may", Yes, the PSE13 and 14 support Nikon D810.
-
Cannot open the new empty file, message with adobe color engine problem
Hello:
I upgraded to elements 9 has received as a gift from Christtmas. Installed on imac 27 "of the disc. When I try to open a new empty file it tells me that there is a problem with the adobe color engine? I thought that I had used the software, but I guess the last thing I did was before Christmas with pse 8.
Help
Thank you
Uninstall (use uninstaller in applications > PSE 9) and reinstall. If you have any type of antivirus software, disable it for installation. Not a bad idea to create a new admin user (System Preferences > accounts) and log in there for the installation. (If all goes well, you can delete the new account later).
-
problem with the Finder - files and folders displaying incorrectly
After acquiring a new iMac, I noticed a problem with the Finder - files and folders are displayed wrong (see table).
This is what happens always after the files have been transferred from one folder to another. I was reminded of my days of using Mac OS in the 1980s when automatic setting of files was not so "automatic." I use Mac OS for decades and I don't remember the last time I had to think about GUI problems like that.
Other problems in the graphical display of files and folders were introduced, such as when you have hundreds of files in a single folder, you end up deleting about 30 to 40 of them say in a particular section, and you end up with gaps of the ChartSpace where files used to be, that is the remaining files automatically rearrange themselves (fill in these gaps) - never. A week later, you open the folder, and the gap of GUI is still there.
I decided to do a clean install of the operating system but nothing works.
Is there some setting in Prefs I'm missing?
Hi there highland99,
Looks like your folder icons are not accommodating themselves automatically you plan to do. To me, this indicates that you have organize by the None value in the view menu. You can change the way files and folders are prepared automatically by clicking on view > reorganize by and selecting how you would like that fixed.
Thank you for using communities of Apple Support.
-
Sansa e280v1: impossible to find new music files in the player
Hello world
I am not fond of new posts, but I've tried various searches and couldn't find any satisfactory results...
Recently, I tried to put the new music files in my Sansa (mp3 format), as I often do. There is already a good load of songs but enough remaining space. The problem is that the files into the device without any problem, but when I unplug, after the database update, music files would not appear in any of the categories of music (artists, albums, songs, etc.).
I checked the labels so that they all ID3v2.3 ISO-8859-1. Yet, after a retry, same result: the files are on the memory of the device but not recognized as music files.
I tried to erase some previous files and put back them: even. New music (.mp3 or .wav) file seems to be not recognized as an audio file by Sansa.
Can someone enlighten me, please? given that it is very frustrating...
The firmware is 01.02.15J (purchased at the Japan)
Sansa e280 v1.
Thanx
Ben.
Well, guys, the solution was much simpler way.
I do not format disks (always fear of losing important data in the process) so I asked questions about another solution before trying this one, but, as shown in the rest of the story, that's what I had to do.
I just format Sansa, the new version of the firmware in it. Files with whom I used to have problems reading perfectly now. So I guess the problem might come from files may be corrupted, I had on the player beforehand.
Anyway, thank you guys for your guest to support!
This rich community can live long!
-
How can I register with new ID graphic signature help?
I use BB graphic Help for packaging aswellas android apps webworks. How can I enter in the new signature file?
an old man has a file pdbt and file RDK now alone... what should I do?
He can't stand not sign with BlackBerry ID chips (note that the SDK WebWorks support yet either). You can continue to use the old method to sign applications Android if you want to use the help of graphs.
-
How can I install my Windows 7 on a mac with all my files intact?
I'm getting a Macbook Pro and I would like to install it on Windows 7 via Bootcamp. I have a few questions:
1.) without having to buy a new Windows 7, can I use my current and transfer it on my Mac, with all my files with it?
2.) If Yes, how can I make a copy of my Windows 7? What do I have to type in my license of something? Or open a file?
I'm getting a Macbook Pro and I would like to install it on Windows 7 via Bootcamp. I have a few questions:
1.) without having to buy a new Windows 7, can I use my current and transfer it on my Mac, with all my files with it?1 license, 1 computer. If your current copy of Windows 7 is installed on another computer, you cannot transfer it to your Mac unless that remove you it from the current computer. There are also a full commercial license.
2.) If Yes, how can I make a copy of my Windows 7? What do I have to type in my license of something? Or open a file?Learn how to:
See:also:
The above mentions Windows 8, but the same principles apply to Windows 7, especially with the new MacBook Pro, who do not have optical drives.
-
Distribute the data file with the cod file?
Hi all
My application runs from a file of database on camera flash memory. While the application can transfer data from my server to complete the database, the first download is quite large and takes a long time to run (I'm working on it).
It occurred to me that an alternative might be to provide a database of pre-populated with the app file, while the app will run straight out of the box without needing to first synchronization.
Does anyone know if the App World store supports this - distribution of data, and the app?
Thank you very much...
You're right about the wasted space. How about you always include a resource file, but make sure that if your program needs to read data from "base", read from the resource file, and if it's new data, read from the DB. I don't know what your app does so I don't know if it's feasible or not, but if this is the case, that would solve your problem. What do you think?
-
I bought my 2009 year Adobe Creative Suite 4 for Mac OS. Now I have bought me a few weeks ago a new Apple iMac 27-inch with new ElCapitan Workprogram. I turn all my dates with a time machine backup of my old iMac 27. But now I can't start my program of photoshop CS4. The error number is 150:309. Call support, they say. It will be very happy, if you can help me. Best regards from Germany black forest... Your Thomas
using time machine to restore the adobe programs is problematic.
at this point, uninstall all done by the time machine to your problematic adobe programs.
clean through the use of the Adobe Creative Cloud cleaning tool to solve installation problems
Restart your computer
well install cs 4 using the installation files and your serial number and activate: How to open third-party developers not identified in Mac OS X applications ' Mac Tips .
Available downloadable Setup files:
- Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
- Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
- Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
- Contribute: CS5 | CS4, CS3 | 3,2
- FrameMaker: 12, 11, 10, 9, 8, 7.2
- Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
- Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
- Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
Hi all
I copied a file from one place vmdk and try to make a new virtual machine with this vmdk file. But when I turn on after the creation of vm error is coming. Error in the text and the image below
Power on the virtual machine: cannot open scsi0:0 disc: disc not supported or not valid type 7. Ensure that the disk has been imported.
See the error of the stack for more details on the cause of this problem.
Time: 31/03/2015-14:40:05
Target: DBServer
vCenter Server: vcsa
Error stack
An error was received from the ESX host turning on DBServer VM.
Unable to start the virtual machine.
Power DevicePowerOn module has failed.
Unable to create the virtual SCSI device for scsi0:0, ' / vmfs/volumes/543d140b-feb33d52-7640-90b11c9796c3/vmdk/kapuatdb.vmdk'
Could not open scsi0:0 disc: disc not supported or not valid type 7. Ensure that the disk has been imported.
This error message generally if the hard files have been copied hosted as VMware Workstation product, which uses a format of sparse file that is not supported on an ESXi host. Instead of the hard copy, you can use VMware Converter, or - if you prefer - you can convert the hard using vmware-vdiskmanager (before transfer) or vmkfstools (after downloading). I deal to use vmkfstools you will need to load the mutliextent module (see for example "Clone or migration operations involving virtual discs non-VMFS on ESXi fail with an error" vSphere 5.1 Release Notes)
André
-
Help, please. I just down loaded Adobe AcrobatReader DC on my laptop new HP Envy with Windows 8.1. Now it will not open a newly low loaded file from HMRC base pay tools 2015-2016, this message appears - "could not open coffee tools rti becauseit isnot n supported file type.
Yes, I thought. This file is not not to open it with Acrobat Reader. Open it in Windows Explorer. It will be like a folder (without the ZIP on the end).
Maybe you are looking for
-
Laptop of HP ENVY m6: high definition Audio Device a yellow exclamation
Hello I have a yellow exclamation next to the high definition Audio Device in Device Manager. He says that I have the best driver when I try to update the driver software. FYI, the Realtek one is good. I need to fix the high definition Audio Device.
-
Silent installation for the support of the shortcut key?
It is really a last resort for me to post here. I looked everywhere else I can. Can someone tell me please how to install the latest version of the assistance of hotkey HP softpaq silently and without a restart? The laptop I have is a Probook 6570 bT
-
Can not put the file of 4 GB key USB 16 GB?
So I have a 64 GB drive (C :) in my Windows XP laptop and a Cenron 16 GB USB drive. In the computer laptop was a video which is 4 GB, and no matter how I drag or copy in the flash drive, an error message will appear and keep saying that the USB is fu
-
How can I do to make a membership feature that would be like in slope of a b ?
-
Today morning when I opened my samsung mini, it displays a message that another computer is running on the same network with the same ip address please find a solution for this