960px simple html does not work?

Similar Questions

• I have a laptop hp envy dv7 - 3723cl, the simple pass does not work

  My simple pass does not work. I have check the biometric device, the software is up-to-date, and it gives me an error code 19.

  On my installed programs I do not see the simple pass program is no longer.  How can I get the correct software to reinstall?

  Help, please

  Hi @GStefanakis ,

  Welcome to the HP Forums!

  It's a great place to find answers and information!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I was unable to locate specific information about a desire dv7 - 3723 cl.

  How can I find my model number or product number?

  Here is a link on technet.microsoft.com that can help.   Code 19: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged

  You can try a system restore to a date well known.  Using Microsoft System Restore (Windows 8)

  If the above did not help, I uninstall and reinstall the software Simplepass.  Using the Recovery Manager to restore the software and drivers (Windows 8)

  I hope this helps!

  

• simple pass does not work to open emails

  simple pass does not work to open emails

  Duplicate the content of the Post-

  My os is windows7 IE9 browser

  Pass Simple contact support.

• Audio HTML does not work, no way to solve this problem simply, without having to learn code or whatever it is me?

  Audio playback on SoundCloud attempt does not work for me, as well as other sites that make use of audio HTML. All that happens is that weird squeaky seems to start playing, and then Firefox will crash eventually. It works fine when I try it in other browsers.

  • Firefox 38.0.1 Crash report [@ mcmpgdec.dll@0x5ac28]

  What is the installation path of the file mcmpgdec.dll if you search for this file?

  That will tell you what software is causing this issue.

• InDesign DPS: Simple Animation does not work in 'folio '?

  I'm building a recipe simple app using InDesign CS6, using the tools of digital publication.

  On one page, I applied an animation, "fly from bottom" in the subject.

  When I finally build the folio and view it on my ipad with the Adobe Content Viewer, the animation does not work on this page.

  I looked at a few tutorials on the use of the animation tools, how to set the path, etc. but none of them mention any other measure for the animation to work once you build the folio.

  Am I missing something?

  Thank you!

  Bruce

  InDesign animations are not supported in DPS. They are only SWF.

  Bob

• Video preview in .html does not work

  I have a video that is played when I saw Flash, but does NOT play when I preview it in .html.  I went on the publication settings, and I think that they are correct.  It worked very well some time back, but does not work now.  I am at a total loss on this thing.  Anyone where I can go to find the right answer for something like that?  Help, please.

  TABLE OF TOAD

  http://toadarray.com

  No problem. Glad it works!

• Statement simple trace does not work

  This is my first flash site, so I could miss something stupid.

  I appointed a form with name, email and comment window. I coded to tab through and have a button to send with your comments (thank you very much for your answer) etcat end. All looks good but when I tested by the trace statement, it does not work.

  Her I wrote the following two lines in the same file to test:

  var myName:String = "Charlie."

  trace (myname);

  It did not work in my file flash for my site, BUT he traced back to the output window it paste it into a new empty file. What is my file big site which prevents him from tracing? It checks without error and everything looks great.

  Help, please

  You are welcome.

• Dissolve simple cross does not work

  Hi, I'm relatively new to first CC, so forgive me if this is a simple solution. I looked on forums for hours trying to figure out why I can't get my simple cross-dissolution to work.

  I'm putting a transition between two clips .mp4, but instead of put in a decent length transition, made first an a TINY (1-2 frames) and then doesn't let me change its duration by dragging. If I manually change the duration by typing in it, it does not develop the transition, but with lines through the calendar item (as if I was applying to a clip without handles). I confirmed that I have handles, and the transition to work on any other cilps.

  I spent more than two hours trying to get something to work that should take less than 10 seconds. Any help is appreciated.

  Handles the item and transitions

  #WS17A423FB-FEF8-4172-A7C8-8521D8CCB8C8 of http://help.adobe.com/en_US/PremierePro/CS/using/WSE2A9B838-1422-4d8a-9A03-CFDF4332533B.ht ml

• HP envy 15-j067cl Simple Pass does not work

  Just bought Envy 15-j067cl yesterday with the fingerprint reader, which I've never used it before.  I did all the updates of Windows 8 and then upgraded to level to Windows 8.1.  I uninstalled Norton, using the removal tool, because I have a current subscription for other security software.  I tried to find a way to implement the Simple collar, which is what I understand how to set it to use my fingerprints.  I was unable to put in place.  I checked for Validity Sensor Device Manager and saw the yellow exclamation with this message:

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) "

  I checked this site, saw a suggestion for drivers of HP recovery, so I did it and now the validity sensor does not show in the Device Manager.  It shows only as "unknown device - another device."  How can I fix it?

  Hello

  First, if you haven't already done so, install the driver from Chipset 8.1 on the following link.

  Chipset Driver - Windows 8.1

  When this has completed, restart the laptop.

  Then see if you can install the following Validity Sensor driver.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63418.exe

  Kind regards

  DP - K

• public static html does not work

  When I try to publish to static html format my 'index.html' file does not contain anything other than the usual code. There is no ordinary HTML code. What I'm trying to do is add alt tags so that I can improve SEO of the file

  To add the title friendly SEO and alt tags, try this (see figure)

  1/for "title" select any item, then in the properties > accessibility Panel Add the 'title';

  2. to add the 'alt', which applies to the images, you must change the element type default of "div" to "img", then you will see the 'Alt' box appears for the item in the selected image in the properties panel.

  Then file > publication settings and make sure that the Web > publish static HTML content is enabled. Record.

  Then file > publish.

  If you view the source of the published version in the browser, you will see your assigned "title" and "alt" information

  

  Darrell

• Why this simple trigger does not work?

  For one of our Test environments, I was asked to implement a trigger which limits users based on ip.
  IP addresses of eligible users is stored in the maint.ip_dtls table. But, does not seem the trigger to trigger the application error and reject the connection when a user with an IP address that is not present in the table ip_dtls try to connect.
  

  create or replace trigger sys.testlogon after logon on database
  declare
  v_ipadd varchar2(100);
  ip_exists number;
  
  begin
  -- Getting the IP
  select sys_context('USERENV','IP_ADDRESS') into v_ipadd from dual ;
  select count(*) into ip_exists from maint.ip_dtls where ip = v_ipadd;
  
  if ip_exists = 0
     then raise no_data_found;
  end if;
  
  exception
  when no_data_found then
  raise_application_error (-20103, 'Insufficient privileges to login');
  
  end ;
  /

  The code works when tested from an anonymous block.
  
  Published by: Steve_74 on November 25, 2010 06:36

  Probably the fact that you create the trigger in the SYS schema could cause problems.
  Have you tried to create the trigger in another schema/as another user?
  SYS (and SYSTEM) belong to Oracle, and you should not create objects in the schema.

  Edit
  See:
  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:3236035522926

  Published by: hoek on November 25, 2010 15:53

• So simple but does not work! Error # 1009

  Doing my first (very simple) interactive chart and am confused as to what could go wrong.

  I have four buttons running from left to right. In the initial screen on the test I can navigate to the second, third and fourth positions on the timeline, but I can't go back. If I select the third button I can move on to the fourth place, but can't go back to 1 or 2. If I test and immediately click the fourth button I can't navigate anywhere.

  Any help would be greatly appreciated.

  *****************************************

  Error

  TypeError: Error #1009: cannot access a property or method of a null object reference.
  at RobberyTrends4_fla::MainTimeline/frame1() [RobberyTrends4_fla. MainTimeline::frame1:12]

  *********************************

  Stop();

  
  import flash.events.MouseEvent;

  
  Lossesbtn.addEventListener (MouseEvent.CLICK, showLosses)
  Injuriesbtn.addEventListener (MouseEvent.CLICK, showInjuries)
  Countermeasuresbtn.addEventListener (MouseEvent.CLICK, showCountermeasures)
  Incidentsbtn.addEventListener (MouseEvent.CLICK, showIncidents)

  
  function showLosses(event:MouseEvent):void
  {
  gotoAndStop ("Losses");
  
  }

  function showIncidents(event:MouseEvent):void
  {
  gotoAndStop ("incident");
  
  }

  function showInjuries(event:MouseEvent):void
  {
  gotoAndStop ("Injuries");
  
  }

  function showCountermeasures(event:MouseEvent):void
  {
  gotoAndStop ("Countermeasures");
  
  }

  Yes, this could be a way for you to solve this problem.  If your buttons exist permanently along the timeline without interruption of new instances of them, then they will all work when called.

  If you who continue and don't want the buttons to appear in their frames of destination, then you can set the visible property to false and keep the replacement images you already have in place... just to keep them on another layer.  You need to just reset their visible property when you move elsewhere.  The best way to do that is to create a reset function that you call in the destination of all executives just before the line where you set the invisible framework... button meaning first set visible property all the buttons for real, then select that you don't want showing on the right wrong after that.

  Another way, you might be able to get out is to have your functions defined in the first frame of a layer of actionscript that extends along the timeline and have it contain the functions of event handler for the button.  In this way, that the functions are available for the length of the timeline.  The part that needs special attention is you set the headphones of events for the buttons in the keyframes you have along the timeline.  So if interrupt you a button along the timeline with a stand-in image, then all instances of this button in the timeline panel need to have the event be given listener

• HTML does not work except in Internet Ex; Plorer

  
  I am new to Dreamweaver and have implemented the beginnings of a site using the model and the files: www.kojonupworking.com.au
  This site presents the texts of the navigation bar in Internet Explorer but not in Firefox or Netscape, and I can't work out why. Can someone give me some ideas?

  cudles wrote:
  >
  > I am new to Dreamweaver and have implemented the beginnings of a site, using
  > model and the files: www.kojonupworking.com.au
  > This site shows the texts of the navigation bar in Internet Explorer, but not in
  > Firefox or Netscape, and I cannot work out why. Can someone give me some ideas?
  >

  Your #navleft and #mainarea layers are positioned so that they hide
  the navigation bar. You can see this by canging the high placement of the page on
  each 300px instead of 200px.

  You have a table top why not just use a simple 2 column table
  inserted under it to house your nav and the main content?

  The problem with the use of layers is that they are positioned absolutely and
  only take into account everything that is resized on the page.

  {#navleft}
  position: absolute;
  left: 0px;
  top: 200px;
  Width: 225px;
  background-color: #FFFF99;
  layer-background-color: #FFFFFF;
  border: 1px none #000000;
  z index: 4;
  height: 650px;
  }
  {#mainarea}
  position: absolute;
  left: 225px;
  top: 200px;
  Width: 775px;
  height: 650px;
  background-color: #ffff99;
  layer-background-color: #FFFFFF;
  border: 1px none #000000;
  z-index: 5;
  }

• Flash embedded in html does not work

  Hi, I tried to make a html file containing a swf on my site work. both swf and html are in my public_html folder, the swf works on its own and when I replace with the name of the swf in the html file for a different swf that is worked. Of course, there is a problem with the swf file. It's big enough (2.7 MB) and there are a few error messages associated with it (because the database is not defined yet) but like I said it works like a swf on its own.
  Sorry for the rambling question but can someone help me? Its for a project for College!

  Hi again!
  Apparently, it was just a matter of waiting. the swf file was so bi (2.7 MB) it took about 15 seconds to come on the screen. I x'd away too soon!
  See you soon
  Marty

• simple? can someone tell this simple btn does not work why?

  Writing my own deactivation button class (with the help of friend - thank you LuigiL)
  
  So, why does my button not turn off when you click it? He runs the deinitializeBehavior function, but the removeEventListeners are not really deleted...
  
  I don't know why, but this could be a graphic problem?
  
  Thanks in advance

  Disables the button attached, but you must change the activation. Because event handlers are removed, the button cannot reactivate itself.