A 9100 XPS will see a 4 TB drive?
A 9100 XPS will see a 4 TB drive?
Hi, first time poster and I hope that it has been excluded as I the have not found in my research.
A 9100 sees the drive as 4 TB, and can I have just drop it in, clone and swap players?
Thank you
Hi made 4DVDs,.
The 4 TB disk must be partitioned using GPT to start from something more 2 TB, so you can't clone the old drive.
Tags: Dell Drives
Similar Questions
-
If I share a garageband e-mail project, the other person will see that my saved loops on the side I have prefer?
maamefrommississauga wrote:
If I share a garageband e-mail project, the other person will see that my saved loops on the side I have prefer?
No, this information is stored locally on your computer only
-
That is to say, for example, if I send a copy to a person and a BCC to someone else. The first person came back and wrote an email Guillaume Meyer I'm trying to answer him with a BCC to the third party. The first party will see the BCC?
Hi Monakeene,
Who is your provider of mail service?
No, the first party will not see the email BCC. Bcc refers to the practice of sending a message to several recipients in a way that hide the fact that there may be additional addresses on the list of recipients. BCC is often used to prevent an accidental "reply all" to reply only to the sender of the message to the entire list of recipients
Come back and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.
-
I'm playing a game on my laptop Toshiba Satellite L350-121, but the optical drive will see the disc if I incert as soon as the computer is started, if I do that the game will work, but if I stop the game or music and you try to incert the disk again the reader does not see it, my OS is Windows Vista serves pack 2 im on a 32 bit OS, my processor is an Intel Celeron T1600 @ 1.66 Ghz, I have 2 GB of RAM, and my optical drive is a DVD/CD-R Matshita RAM UJ880AS.
I tried the troubleshooting Microsoft's automated with no joy. Can anyone help.Hello
Here are a few articles that will probably solve your problem.
Your CD or DVD drive is missing or is not recognized by Windows or other programshttp://support.microsoft.com/kb/314060 - a Mr Fixit
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461
Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems
When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052
Mark <> Microsoft Partner
-
Where we will see the first incarnation of the Cloud resource model API?
Where and when we will see the first incarnation of the API model of Cloud resources in a deployable product?API cloud resource model is expected to be filled in the next major release of the Enterprise Manager in 2011.
It may be of limited availability beta phased, but has not yet committed. We will make an announcement on this forum, each time as a sandbox or environment becomes available.
-
I don't see my cd/dvd drive in my computer?
It's about to get the best of me! I'm trying to fix HP Pavilion dv9700 with processor AMD windows Vista 64bitt wife. When you insert a cd/dvd in the drive it turns, bends and turns off. I do not see the cd/dvd drive in my computer (drive E :). I can see it in Device Manager and device manager says its working properly. I deleted the upper and lower filters in the registry, uninstalled the drive, reinstalled the drive, the drivers updated, physically removed the drive from the computer and check the connector, everything looks ok. Is the drive itself bad? If so, why then I see it in my computer. I ran a few fix his well they say they fixed the drive sucssefully it is still a problem, and it still does not work. I'm not a big fan of Vista OS, less than one become today!
Hello
Check with HP, their drivers support and documentation online and ask in the Forums of HP in case
known problems.Support HP & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/================================================================
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.
-
Windows 7 will not recognize the dvd drive
Windows 7 will not recognize the dvd drive, although it worked well for more than two years. Now I can't access it to install new software.
It will not be displayed in the Device Manager, bad shooters to say it is not connected or is, tried Fixit fix (could not as "not applicable to your computer update"), uninstall iTunes (in the case of a conflict - even if it worked with the DVD of > 1 year), etc., but still cannot access the DVD.
It's obviously a known issue, given that a support page - http://support.microsoft.com/kb/976187 that recommends the fix or manually disable ALPM active power management. If it of a known issue, why is not included in the updates and that I have to disable ALPM power if management it worked ok before?
What now? Is turn off the power, my only option? What happens if it is not yet recognized after that?
Hello
If the drive is viable:
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================================
After the foregoing:
References to Vista also apply to Windows 7.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The DVD player does not work after installing Windows 7
http://support.Microsoft.com/kb/975270/The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry settings for your
CD/DVD drive someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays
all devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">
-
laptop will not allow new hard drive
Laptop HP 2000-2b19WM will not again take hard drive, no parameters in Bios to allow to change the SATA or IDE drives I activated the legacy... support any help would be appreciated...
OK, that makes sense. Starting with Windows 8 key Code is built into the BIOS. If you could get an OEM of Windows 8 drive you can install it and it just works (activate) without needing a key Code.
And if she has had 10 Windows activated on this subject, you can reinstall Windows own 10 and it will activate only as soon as it is connected to the internet.
-
Help with my computer of dumping
I have windows xp and I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or usb ports. How can I do this without the disc?
If there is anything physically wrong with your hard drive, you can use Darik Boot and Nuke (DBAN aka) to make a scrub of the security of your HARD drive. Glance to download here.
-
I don't see the entire hard drive under Vista. When I try to shrink a volume, I seem to lose space.
Original title: I see all the hard drive under Vista
I see on the C drive properties
"space used = 143 GB ', and"
"494GB of free space. But, when I try to do a third partition to install windows 7, using the disk management tool, after I click on
shrink the volume on drive c, I don't see that: ' available shrink space: 79, 917 MB ' and I also see 'total size after shrink in MB = 573891'. I expect all the free space 494 GB available shrink. I'm wrong. Why all the 494GBs are not available to reduce or at least half of it, I guess that instead of only available to shrink 79Gs!
In addition, currently, I have three partitions. For vista, office and other programs and data, C D like Factory Image of HP, a 11.3 GB and yesterday I made a partition for windows 7 with 48.83GBs and installed windows 7 Professional there. Then I realize, I need more space to install office and other programs and data. This is when I tried to shrink the c drive and encountered this problem.
Can you please help me
Thank youHello
you do not shrink the C: drive and then expand the E: drive back in the space that you did
You cannot extend a drive backward
and I gave you a link to read and use on the problems of shrinkage
If as a result of the information on how vista disk management work does not fit what you want to do, you may need to buy 3rd party partition software
-
I do not see my external hard drive in my computer but I can't in my devices and printers. I too see the drive in disk management. There is a lot of data on my hard drive that I need to save. It says that I have to initialize so the computer sees the drive but it clears my data. How to recover data? The drive works and makes no noise. Help, please. I uninstalled the RPG player
and reinstalled. I've also updated the driver and I still don't see the drive in my computer.
Hello
Welcome to the Microsoft community.
I understand that you have a problem with finding printers and external hard drives in the computer. We apologize for the unhandiness caused to you and appreciate your efforts in trying to solve the problem.
To help you better I would like to know the details.
- What is the brand and model of the computer?
- You did changes to the computer before the show?
- Have you tried to connect the same external hard drive on another computer?
I ask you to run the hardware and devices Troubleshooter and check if the problem persists. It is an automated tool that checks the hardware attached to the computer for known problems and provides details on how to correct them.
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
I ask you to install optional Windows, including updates updates and check if you are facing the issue.
Keep us updated on the issue to help you better.
-
Have renewed my subscription ExportPDF, have the confirmation e-mail, but still up pop with window 'your course has expiré' when will convert via the printer driver window. Comments / help welcome thanks :-)
Hi azza675,
ExportPDF converts PDF files to Word and Excel formats (and many others). What you describe, sounds like you are trying to convert a file * to * PDF. Have you ever started a trial of Acrobat, maybe? (So that you can create PDFs with Acrobat, ExportPDF don't allow you to convert files to PDF.)
What happens when you connect directly to ExportPDF to https://cloud.acrobat.com/exportpdf?
Best,
Sara
-
Someone will see your email Apple ID if you FaceTime them?
I was in the shower and after that I was through, I received notifications in the phone that someone tried to FaceTime audio me three times in the same minute during this period. By mistake I audio FaceTimed their return, after touching their number out of curiosity, due to the fact that it was a local number in the city where I live. In any case, I never use FaceTime and don't know much. However, I was in settings and noticed that, under FaceTime, he said: your phone number and/or e-mail address will be shared with the people you call. Under the CALLER ID only my phone number has been verified. However, as YOU CAN BE MET BY FACETIME to, my phone and e-mail have been verified. My question is has this person able to see my Apple ID address by email, or all simply my phone number? I don't know there is not much to worry, I still would prefer not to give my email however addresses. Also, it's probably completely independent, but shortly after those calls I had problems with Safari gel in Google, then my icon of location services turned solid for one short moment, although I put sites Web Safari never use my location. Sorry, I just thought I'd throw that with my question to see if someone wanted, or that he had all the answers to this. Sorry for the paranoid of poll, I just take my information, including my email more seriously that I probably should. Thanks to a bouquet.
According to the face that you use for outgoing calls will be visible to anyone call you (check the settings app > FaceTime > CALLER ID to what you have selected, you can only select a single address for this; are is not the same thing that YOU CAN BE REACHED at).
Regarding the gel Safari, there is no reason to believe what is bound.
-
Since we use mandatory profiles for all users, after firefox gets updated the user is obliged to see a "Hooray!" Your Firefox is up to date. "every time the log message and start the browser.
It is not easy or possible to update user profiles whenever firefox gets updated. Elsewhere lately, very often. Where in the world to server-side turn off this annoying message? Or at least how do I manually change the preferences file stored in the folder of mandatory profile to disable this annoying message?Try to set the pref browser.startup.homepage_override.mstone to ignore a mozilla.cfg file.
Place a local file - settings.js in the defaults\pref folder where you will also find the channel - prefs.js to specify using mozilla.cfg file.
pref("general.config.filename", "mozilla.cfg"); pref("general.config.obscure_value", 0); // use this to disable the byte-shiftSee:
You can use these functions in mozilla.cfg:
defaultPref(); // set new default value pref(); // set pref, but allow changes in current session lockPref(); // lock pref, disallow changes
-
He double blue line under a word like POWER or Medicare, etc.
It is contextual advertising. You should be able to eliminate one of the following. I suggest you have a file hosts and Adblock Plus with EasyList filter subscription.
Extension "Adblock more."
- You also need the filters as "Easylist" subscription so after installation of
- with the right button on the icon of the status bar and choose 'Préférences'
- then on the filters menu-> Add-> EasyList subscription
- https://addons.mozilla.org/firefox/addon/adblock-plus/ (608,3 KB)
Blocking unwanted Parasites with a Hosts file
- Blocking is at the level of the system
- http://www.MVPs.org/winhelp2002/hosts.htm
- View/use the HOSTS offered above as a plain text file
- http://www.mvps.org/winhelp2002/hosts.txt (596KO)
- If you add one of your own you will have to keep in mind
and manually include the online hosts.txt file below your own.
Hosts file is more oriented to protect your system against the really bad
or things spread by its host name. Do not confuse with no antivirus protection more.Please mark "resolved" a response that will better help others with a similar problem - hope it was her.
BLOCKED TOO - with Adblock Plus - no problem:
- With the ease of blocking items in Adblock Plus occasionally, you can be too aggressive and suddenly disappear all over the page. Adblock Plus provides functionality to help you know more precisely what you block with on a page.
As seen in the Preferences ("Ctrl + Shift + F"), ABP maintains separate groups
-The filters that you created yourself (rules of Exception, blocking rules, element hiding rules)
-Separate groups for each subscription filterThe report of blockable items ("Ctrl + Shift + V"), it's where you go to see what is blockable, what is blocked and if blocked what the rule is on the line with the mouse hovering. It would also enable the source, so you can see if it was your rule. The right mouse button opens a context menu with options. I show the columns are {address, filter, type, State} selected to the right of the headings. I have sort by State so block appear in red at the top.
You can use the report to make the changes you need.
We'll see changes you make in the preferences.
Maybe you are looking for
-
How can I leave finder? When I commandq it is not to quit.
-
How can I pay for my subscription to apple's music?
Specifically, I received a gift card and I wonder if I can use this to pay for my subscription to apple's music.
-
I tried to set up a new network, but I'm not having any luck.
-
OfficeJet Pro 8620: Officejet Pro 8620 Ethernet recognition
I have a new Pro of Officejet 8620. I plugged our Ethernet, but the printer continues to say that it is in offline mode. I checked with several different cables. When the printer initializes, the ethernet connection lights light up, but then turns
-
How to restore the basket recycled in vista home Panizzi?
I deleted the trash of my homepage by chance and I can't find the answer to restore