I don't see my cd/dvd drive in my computer?
It's about to get the best of me! I'm trying to fix HP Pavilion dv9700 with processor AMD windows Vista 64bitt wife. When you insert a cd/dvd in the drive it turns, bends and turns off. I do not see the cd/dvd drive in my computer (drive E :). I can see it in Device Manager and device manager says its working properly. I deleted the upper and lower filters in the registry, uninstalled the drive, reinstalled the drive, the drivers updated, physically removed the drive from the computer and check the connector, everything looks ok. Is the drive itself bad? If so, why then I see it in my computer. I ran a few fix his well they say they fixed the drive sucssefully it is still a problem, and it still does not work. I'm not a big fan of Vista OS, less than one become today!
Hello
Check with HP, their drivers support and documentation online and ask in the Forums of HP in case
known problems.
Support HP & drivers
http://welcome.HP.com/country/us/en/support.html
Contact HP
http://welcome.HP.com/country/us/en/contact_us.html
HP forums
http://h30434.www3.HP.com/PSG/
================================================================
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.
Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit
Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml
Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461
When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052
Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems
CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/
Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems
Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.
Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.
===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.
Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.
Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.
Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.
Forums - a lot of expert real help
http://Club.myce.com/
CD/DVD units
http://www.myce.com/storage/
Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.
DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html
I hope this helps.
Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.
Tags: Windows
Similar Questions
-
I don't see my external hard drive in my computer
hard drive problem
Hello! I have a little problem with my drive hard seagate newly purchased. "When I plugged in my computer, it says"the device is installed successfully"and another pop-up saying" your unit is now ready for use. but when I open my computer I do not see the device to hope tried to open it via the Control Panel, but still I can't open it. I have need of your help on this, please advice. Thank you!
Control Panel
Administration toolsComputer managementStorageHow to ask a question in the forums:
-
The model number is WD2500ME-01 and it is usually a plug-and-play intstallation
Hello
- If it works well before?
- What were the changes made before the issue occur?
You can check this link:Advanced troubleshooting tips for General USB for Windows XP problemsYou can also check this link: -
I have Acrobat 9 Pro. Can I switch to Acrobat DC of that? Also, if I buy the product with a CD/DVD, can I also download online. I don't have a CD/DVD drive.
upgrade price is available for acrobat x and xi, Plans and prices | Adobe Acrobat DC
If you have:
Upgrade to
Acrobat Standard DCUpgrade to
Acrobat Pro DCAcrobat Standard DC
US $199. 00Acrobat X or XI Standard
US $139. 00US $199. 00Acrobat X or XI Pro
US $139. 00US $199. 00Acrobat X Suite
US $139. 00US $199. 00Acrobat 9 and earlier versions, as well as Acrobat Reader, are not eligible for upgrades. Subscription customers are not eligible for the perpetual license price update. To access all the tools Acrobat and Document cloud services, consider a subscription Acrobat DC.
and Yes, you can download.
Available downloadable Setup files:
- Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
- Captivate: 8 | 7 | 6 | 5.5, 5 | 1
- Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
- Contribute: CS5 | CS4, CS3 | 3,2
- FrameMaker: 12, 11, 10, 9, 8, 7.2
- Lightroom: 6.3| 6| 5.7.1| 5 | 4 | 3
- Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
- Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
I do not see my external hard drive in my computer but I can't in my devices and printers. I too see the drive in disk management. There is a lot of data on my hard drive that I need to save. It says that I have to initialize so the computer sees the drive but it clears my data. How to recover data? The drive works and makes no noise. Help, please. I uninstalled the RPG player
and reinstalled. I've also updated the driver and I still don't see the drive in my computer.
Hello
Welcome to the Microsoft community.
I understand that you have a problem with finding printers and external hard drives in the computer. We apologize for the unhandiness caused to you and appreciate your efforts in trying to solve the problem.
To help you better I would like to know the details.
- What is the brand and model of the computer?
- You did changes to the computer before the show?
- Have you tried to connect the same external hard drive on another computer?
I ask you to run the hardware and devices Troubleshooter and check if the problem persists. It is an automated tool that checks the hardware attached to the computer for known problems and provides details on how to correct them.
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
I ask you to install optional Windows, including updates updates and check if you are facing the issue.
Keep us updated on the issue to help you better.
-
Satellite M70-340: I don't see that the DVD absolutely menu Cup after reinstalling
Hello
I recently bought Toshiba M70 - 340 2 weeks. Now I learn that it is better Toshiba comparing the My.
My question is that I don't see on the screen the DVD absolutely cut menu. First time when I opened it it was on the Ra±ght referring
of the screen and my machine was Turkish Win XP Home edition. I have reformat and changes in the English version of Windows XP that accompanies it in Toshiba Recovery CD. But I lost the menu screen for the DVD I guess. A± now don't know how to reinstall this option.In addition, my machine is using the Intel Centrino 1.7, but I don't know if it is a two-way process. Second, the ram is 512 MB and I'm looking to buy 2 GB ram extened but seems still very very expensive (around $1100) why is that 2 GB of ram so expensive?
I am using my laptop for software engineering but also using Macromedia flash and Adobe Photoshop.
The application and MS VS.NET 2005 as long as SQL Server 2000 and SQL Server 2005 to the application is very slow and sometimes it takes more than 30
min. compile or open it.I have my home PC P4 3.2 G with 1 GB of ram and it is faster than my Toshibe laptop.
Be honest with me, after a 5 years later, I bought my second computer laptop and everything first a laptop from a different manufacture.
I'm looking on the internet and I find the M70-340 with Turkish Q keyboard was the best option and it cost me $1450.All I need to know how to overcome my problem and I need a Toshiba to explained to me carefully.
Can someone read my post and answer my question and concerns?Thank you very much and I look forward to receiving help.
Kind regards
NTMS2006Hello
I don t want to disappoint you, but please don t wait for someone from Toshiba will write to you because it comes to the forum user. I will try to write a few comments because I have the same unit as you.
This DVD shortcut is really not understandable for me and I really put t know what you are writing about. If the DVD drive is recognized and installed correctly, it should be listed in the Device Manager and also shown in Windows Explorer. If you want to launch about it please describe the exact location of the DVD drive in Device Manager and Windows Explorer.
You're right about the memory. This laptop comes with 512 MB of Ram. According to the specifications of the laptop can handle max with 2 GB of Ram and if you want to use max please use 2x1GB module. Is compatible DDR2 400/533 1 GB (PA3411U-1M1G).
2 GB modules are the latest and newest is very expensive. I put t know how much it can cost but certainly not around $1100. With this money, you can buy the laptop integer.
The list of the used software is impressive and not wonder if the laptop is running slowly. Upgrade of Ram max and it will be much faster. Please don't compare your office with this mobile unit.
Pick up the news how much memory costs PA3411U-1M1G module and two of them use for RAM max. You will see that unit will go faster and I hope that you will be satisfied with the performance.
Good day!
-
Portege M400: Vista does not see the CD/DVD drive
Hello
I have improved my M400 for Vista, and now it seems that I have a problem with the driver for my DVD player.
I don't see a driver vista for the DVD player.
Any ideas?
Steve
Vista uses the Microsoft own driver and you don't need any special drivers to get the job of CD/DVD drive.
-
I can see the CD/DVD drive in Device Manager, but it will play all discs.
LG GH 22N S50 DVD/CD PLAYER WON'T PLAY DISC
LIES IN THE MANAGER OF DEVICES AND MY VISTA ULTIMATE 64 BIT, GIGABYTE MOTHERBOARD INTEL E8500 CPU COMPUTERIS A CHIPSET ISSUE?DOWNLOAD FIRMWARE OF SAMSUNG USA SITE AND of GETTING "Cannot FIND TARGET" WHEN I RUN THE FIRMWARE UPDATEDOWNLOADED FROM TURKISH SITE AND INSTALLED TN02 BU T STILL NO CHANGEMANY FIXES SAY GO TO REGDIT AND... UPPER FILTERS AND LOWER...BUT I DON'T HAVE UPPER AND LOWER FILTERS TITLE IN MY REGISTRYOriginal title: GH22N S5O dvd/CD players IS in DEVICE MANAGER BUT WILL NOT PLAY DISC IS in MANAGER of DEVICESHello
You can contact the manufacturer that the problem is related to the installation of the firmware update, and similarly, there may be hardware related problems with the CD/DVD drive.
-
I bought the laptop to a pawn shop and waiting for a few minor problems, but not this one.
It began with the webcam doesn't work does not correctly, but works. After Device Manager running that it has detected a Xerox Pro scanner, not built in webcam which i see in front of me. I tried everything with no success, but this isn't the only problem there is... more
After I realized that the cam is not working, all 3 USB ports leaving recognize anything and all the devices connected by a mouse flexible wireless microphone on a memory stick 4 GB, could not be recognized. All were then tested in two other PC with these things being recognized and installed on the PC.
I have updated after him saying driver not installed, only to be told driver is already up-to-date, but will still not be recognized.
Now the CD/DVD does not work and is not even detected in scan. says the drivers are not present or that is disconnected. I did nothing else than to go in circles are doing the same thing over and over again.
Is there a worm or bug or something wrong freeking I know and how do I solve this problem?
I like most of the features of vista, but if it's the doo doo a bit I have to put up with... I want XP less back pain...
Once again can not locate or install programs or drivers to operate the integrated webcam
All USB ports defective 3 and CD/DVD is no longer functional or even detected in laptop... HELP ME PLEASE
Hi Laurent,.
1. did uninstall you the USB ports on the Device Manager and reinstalled as mentioned in the previous post?
Please see the following thread link:
my USB say this device not yet recognized the worsks device in the other laptop why?
Uninstall all USB device manager entries and check.
a. Click Start and typedevmgmt.msc and then click OK. Device Manager opens.
b. expand Bus USB controllers.
Note: You will need to scroll down to find this point.
c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.
d. Repeat steps above for each controller USB is listed under Bus USB controllers.
e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.
f. check the USB device to see if it works
2. have you tried to uninstall the webcam?
If this is not the case, try to uninstall the webcam in Device Manager and install the latest version of the drivers from the following Acer site.
On the problem of DVD player, you can try the steps in the following article and check if it helps.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
Hope this information is useful.
-
Original title: I see all the hard drive under Vista
I see on the C drive properties
"space used = 143 GB ', and"
"494GB of free space. But, when I try to do a third partition to install windows 7, using the disk management tool, after I click on
shrink the volume on drive c, I don't see that: ' available shrink space: 79, 917 MB ' and I also see 'total size after shrink in MB = 573891'. I expect all the free space 494 GB available shrink. I'm wrong. Why all the 494GBs are not available to reduce or at least half of it, I guess that instead of only available to shrink 79Gs!
In addition, currently, I have three partitions. For vista, office and other programs and data, C D like Factory Image of HP, a 11.3 GB and yesterday I made a partition for windows 7 with 48.83GBs and installed windows 7 Professional there. Then I realize, I need more space to install office and other programs and data. This is when I tried to shrink the c drive and encountered this problem.
Can you please help me
Thank youHello
you do not shrink the C: drive and then expand the E: drive back in the space that you did
You cannot extend a drive backward
and I gave you a link to read and use on the problems of shrinkage
If as a result of the information on how vista disk management work does not fit what you want to do, you may need to buy 3rd party partition software
-
A100: Can't see my CD/DVD drive
I uninstalled an unknown version of a program called Daemon tools (earlier this year) one never since my cd-RW/dvd drive has always been does not appear in my computer as if I did not at all a cd/dvd drive!
I still need to acsess my C drive and any other device I have plugin via USB or whateva. But when I start my laptop, only 1 time in 4 or if my CD-RW/DVD drive appears.
If I put a CD or DVD in the drive when the icon is not in my computer, nothing happens, and I have not found a solution.
How can I get my CD/DVD combo drive to work whenever I start?
-J' have Priofessional of Windows XP service pack 2 Version 2002
-J' have a program called ' drag ' n drop CD + DVD "like burning software.
-My computer is a Toshiba A100 with pentium m 1.4 ghz, 496 MB of ram.I can't find anything to do with cd/dvd players or drivers in Device Manager. They have completely disappeared. I can't install this again as a "new hardware" because the computer can not find. Maybe I should find a program on the net that can reset my drivers or sumething? My cd/dvd drive does not at all now.
Any ideas would be greatly apreciated.
Hi Matthew,
I'm not familiar with the program Daemon Tools, but the loss of the CD/DVD drive is a known problem when deleting some portable software you.
The Microsoft Knowledge Base has several artocles on the problem and how to solve it.
Please visit the following link: -.
http://support.Microsoft.com/kb/314060/
Kind regards
-
Cannot find CD/DVD drive in my computer on Device Manager. CD - DVD does not work
I recently discovered that my CD/DVD drive does not work. It worked fine before. Tried to burn a CD in iTunes, but the error message says that the software or the CD device could not be found.
My CD/DVD drive does not appear in the computer or Device Manager. I have read a few forums and tried to delete upper and lower filters, but that no longer works. Help, please.
I am running Windows Vista - it came installed on my computer when it was purchased.
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Equium M50: No icon of CD/DVD drive in "my computer".
Hi all
I use an equium m50 and I encountered a problem.
There is no CD in cd/dvd drive icon in the section 'my computer '. I have installed a cd burning software and burned a cd, shortly after the CD-ROM icon disappeared. I've removed the device using Device Manager, and then installed the driver of device again. He said, the drivers have been installed successfully, but cannot find the hardware.Also, I get this message now when I click on properties of cd/dvd rom in Device Manager "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) "now that I can't use a cd, the possibility of reinstalling the operating system is also excluded. can someone help me with the problem im facing?
Thanks in advance
KiranHello
You can t see the drive in the my computer because the registry entries are damage. Well, I put t know all other possibilities to fix these entries outside the new installation of the operating system with the recovery CD or / and to use the Windows XP System Restore tool.
Well, I think you should try these options.
Good bye
-
The Vista Device Manager doesn't detect cd/dvd drive on my computer hp laptop.
I tried the routine fixit several times, also the routine regedit to remove the upper/lower limit. The routine fixit worked once. The dvd has been available for about 2 days, then disappeared.
HP even sent me another DVD player.
Now what?
Read all of this information, including what you have tried:
http://welcome.HP.com/country/us/en/support_task.html
Go to the HP Web site > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.
http://support.Microsoft.com/kb/982116/en-AU
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/GP/cd_dvd_drive_problems
See if the information above solves the problem.
See you soon.
Mick Murphy - Microsoft partner
Go to the HP Web site > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.
-
No CD/DVD drive in my computer on Satellite Pro M70
The DVD/CD on my M70 drive does not appear on Win Explorer or Device Manager now.
If I insert a CD/DVD, he leans on it and the light comes on, but nothing. If I press the DVD button on the keyboard it is said "the CD or DVD drive is not inserted. Insert the player that can play CDs or DVDs.
Any suggestions?
I think that it is simply a problem with registry entries.
I studied a lot in the Microsoft Knowledge base and in this forum and found a link that has been proposed here in the forum some time:
http://support.Microsoft.com/kb/320553Maybe it will help you to solve this little problem
Maybe you are looking for
-
Compatibility of 611 series HP 3050 has
I bought a HP 3050 has this weekend. Tried to download the software from the website, it had Windows XP as a choice, but says that "the system is not required for installation. The software does not support this version of windows? It works with Wind
-
HP dv6-3180SP: Hp dv6-3180SP Exchange CPU and heatsink
Hello I have two questions. A first, I have a HP DV6-3180SP, and I want to upgrade my processor. My current treatment is: Processor Intel Core i5 - 460 M 2.53 GHz, turbo up to 2.8 GHz, Dual 35 W SC In the manual of maintnance, spare parts, it is list
-
Track 3D whose origin (0,0,0) by default?
I'm trying to plot data 3D on a trace of contours, and for some reason, the plot seems to always include the origin (0,0,0), even if it is not included in the data set. As a result, my surface contour ends up looking a bit wobbly. It helps that I hav
-
Original title: When the computer starts, this message to MS Visual C ++ Runtime Library C/program files/real/Real Player / Real pure R6035 - virtual function cell Play.exe
-
Facebook and blackBerry Smartphones blackberry app world really slow down or do not work
Hi I have a new 1 month blackberry curve 9300 6.0 bundle 1879 worm 6.0.0.448 Since the 21st off may I have had these errors on the application of face book it is really slow or sometimes does not connect to all the on the blackberry app world, it too