A beep when done does not

Similar Questions

• Force the print to stop/restart spooler service when it does not

  Our office has a HP plotter, where the driver (note that we have the latest version, directly from the HP site) seems to cause the print spooler service becomes out of order sometimes.  In turn of the programs (including AutoCAD and Outlook) to lock, as well as windows, as the dialog box, which causes devices and printers.

  If I restart the 'Services' print spooler service in computer management, it goes back to work at least some time - if at least I can work around the problem.  It is important to note however, that even by using this method, it throws a dialog box error saying that the service failed.  But since this is a question with all facilities of this liner installed with Vista, I need to have a method easier to use of the service is restarted.

  I wrote a file .bat base with a net stop spooler command followed by a net start spooler command, but the problem is that, unlike with computer management, net stop does not seem to force the service to shut down if it does not, and I can't find a way to force the stop command.

  Is there a tool more powerful/switch available that I could script so that users can easily stop and restart the spooler service when it does not?

  Thank you

  Type sc /?

  --
  ..
  --
  "mgarrison" wrote in message news: d3d768a8-126-b-4246-a4d8-ca6d8f4db6a7...
  > Our Office has a HP plotter, which the driver (note that we later
  (> version, directly from the HP site) seems to cause the print spooler
  > service becomes out of order sometimes. Which causes in turn of programs
  > (including AutoCAD and Outlook) to put him away, windows as the
  dialogue of the RHS.
  >
  > If I restart the spooler service for printing of 'Services' in computer science
  > Management, she goes back to work for at least some time - if at least I have
  > can work around the problem. It is important to note however, that even
  > by using this method, it throws an error dialog box saying that the service
  > did not. But since this is a problem with our Vista
  > facilities having this installed plotter, I need to have a more
  > user-friendly method of restarting the service.
  >
  > I wrote a .bat file to base with a net stop command spooler followed by a
  > net start spooler command, but the problem is that, unlike with a computer
  > Management, net stop does not seem to force the service stops if it is not
  > answer and I cannot find a way to force the stop command.
  >
  > Is there a tool more powerful/switch available that I could then script
  > users can easily stop and restart the spooler service when it is not
  > sensitive?
  >
  > Thank you

• How do I uninstall ALWIL SOFTWARE AVAST 4.0 on the computer when it does not appear in the Panel

  I use windows 7. some time before I installed ALWIL SOFTWARE AVAST 4.0 antivirus on my computer... BT after a few days I uninstalled it from Control Panel as he was infected... now, I want to install KASPERSKY antivirus on my computer bt to install the wizard configuration askin remove me avast... No Comment could remove avast when it does not show in the conrol Panel... I even searched my local disk c and any computer... BT, it does not appear avast software... wt should I do nxt... plz hlp!

  1. remove all traces of Avast via this link.

  http://files.avast.com/files/eng/aswclear5.exe

  2. I recommend you then install Microsoft Security Essentials instead of Kaspersky, via the link below.

  http://www.Microsoft.com/security_essentials/

  3.I suggest also you scan your computer for malware using Malwarebytes. {free}
  After downloading update immediately.
  Do a full scan of the system

  http://www.Malwarebytes.org/products

• How can we change the beep in "beep when done?

  TSITM

  ~ Mohit,

  I answered the question of slaughter actually thinking about a change.  'Beep when done' the checkbox is turned on in Photoshop, I was getting a particularly annoying when Photoshop has finished a task.  The fault was in the OS X system preferences, I changed the sound effect of 'frog' of 'underwater' type, much better.

  Ralph

• How can you save your illustration in Photoshop CC 2014 as PNG or JPEG file when it does not give the option?

  How can you save your illustration in Photoshop CC 2014 as PNG or JPEG file when it does not give the option?

  Thank you for your time and help in advance.

  Thanks for the reply. I have actually managed to do work. I had my work instead of 16 or 8-32 bit/channel value. Once I changed it to 16-bit/channel, he gave me the possibility to register under the registered name. Thanks again.

• When Lightroom does not display color space?

  When Lightroom does not display color space is assigned to an image? It should be in the metadata Panel. In Bridge, it displays color Mode: RGB/B & W and color space: sRGB/Gray Gamma 2.2. Or Lightroom all converted Adobe RGB or ProPhoto RGB?

  The ExifMeta plugin (free) will show the color profile in the metadata Panel.

• "Wait until done" does not stop even if data generation is already waiting.

  Hi all

  I have a code as well for production and data acquisition with rates of around 50 kHz samples. I've predetermined length of the data, so I use finite-sample-generation. I use also wait until done to make sure that my work is done correctly. When I measure simultaneously my data generated, I see that wait until done yet not all of my signal is already created. And also I get error of 200560 (timeout to wait until the done function)

  Please see the below data generation loop:

  

  Does anyone have an idea on what's not here? (Subvi is also attached)

  See you soon,.

  Palazzo

  Hello Madoum,

  Thanks for the reply, I went through these documents in the past so many times.

  BUT finally found the reason: "error is always the simplest. I have 4 loops in parallel, it turns out that my stop command can't loop generation in time so that the state machine is running once again generating data.

  Thanks for the replies so far.

  Palazzo

• my screen is black at the start. not bios. No beeps. external monitor does not work either.

  I have a G62-343NR which suddenly stopped working after I tried to do a Windows Update.  At the present time, when I try to turn it on, I hear the fans whirring and the HD, kicking, but there is no beeps & my screen remains black.  The wifi stays on, but my caps lock button will Flash.  I thought that the screen has gone bad, but when I plug my external monitor, it does not show something or the other.  I tried to insert a Windows 7 installation disc, but nothing appears on the screen, and no beeps are heard.  The fan is turned on.

  Any ideas or solutions?

  It was running Windows 7.

  Hello

  It looks like not a component on the motherboard does not, but it is worth trying the following.

  In regards to the link below, delete one of your modules of memory and then see if the laptop will start.  If it doesn't, try the same module, but in another location.  If it is still won't start, try just the other memory module in both slots, to see if any combination will allow the laptop to start.

  The procedure for withdrawal of these modules is detailed from Page 55 of your & Maintenance Guide.

  Kind regards

  DP - K

• ORA-31000 lifting even when USER_XML_SCHEMAS does not have any line.

  We create a huge XML file with patient information and medication. Read us the values of table tag and create the XML file and insert a CLOB column in a table.

  Before inserting, we want to make sure that the XML is validated against an XSD.

  To test this I created a small SP.

  DB my is: SELECT banner OF v$ version WHERE ROWNUM = 1;

  BANNER

  --------------------------------------------------------------------------------

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  The user has the following privileges:

  USERNAME PRIVILEGE ADMIN_OPTION

  ------------------------------ ---------------------------------------- ------------

  PEGA CREATE SYNONYM NO.

  PEGA UNLIMITED TABLESPACE NO.

  PEGA CREATE ANY TRIGGER NO.

  My PC is:

  create or replace

  procedure validate_xml_test as

  -Local variables here

  -XML and XSD obtained from here: http://www.w3schools.com/schema/schema_howto.asp

  RES BOOLEAN;

  tempXML XMLTYPE.

  XMLTYPE xmlDoc;

  xmlSchema XMLTYPE.

  schemaURL VARCHAR2 (256): = "testcase.xsd";

  number of v_error_at;

  BEGIN

  v_error_at: = 05;

  dbms_xmlSchema.deleteSchema (schemaURL, / * 4 * / DBMS_XMLSCHEMA.) DELETE_CASCADE_FORCE);

  v_error_at: = 10;

  xmlSchema: =.

  xmlType ("<?") XML version = "1.0"? >

  " < xs: schema xmlns: XS =" http://www.w3.org/2001/XMLSchema "

  " targetNamespace = ' http://www.w3schools.com "

            xmlns=" http://www.w3schools.com "

  elementFormDefault = "qualified" >

  < xs: element name = "note" >

  < xs: complexType >

  < xs: SEQUENCE >

  < xs: element name = "en" type = "xs: String" / >

  < xs: element name = "" type = "xs: String" / >

  < xs: element name = "category" type = "xs: String" / >

  < xs: element name = "body" type = "xs: String" / >

  < / xs: SEQUENCE >

  < / xs: complexType >

  < / xs: element >

  < / xs: Schema >

  ');

  v_error_at: = 20;

  dbms_xmlschema.registerschema (schemaurl = > schemaURL,)

  schemadoc = > xmlSchema

  local = > TRUE

  , genTypes = > FALSE

  , genbean = > FALSE

  genTables = > FALSE);

  v_error_at: = 30;

  xmlDoc: =.

  XmlType ("<?") XML version = "1.0"? >

  " < note xmlns: xsi =" http://www.w3.org/2001/XMLSchema-instance "xsi: noNamespaceSchemaLocation ="'| "'. schemaURL | '">

  < to > Tove < /pour >

  < from > Jani < / from >

  < title > call < / section >

  < body > don't forget me this weekend! < / body >

  (< / note > ');

  v_error_at: = 40;

  xmlDoc: = xmlDoc.createSchemaBasedXML ();

  v_error_at: = 50;

  xmlDoc.schemaValidate ();

  -If we are here, xml is valid

  Dbms_output.put_line ('scheme is OK.");

  exception

  while others then

  Dbms_output.put_line (' error @: ' | v_error_at |) ' -> ' || SQLErrm);

  END;

  Before running I check this: select * from user_xml_schemas;

  There is no line.

  Here is the result of the PS:

  BEGIN validate_xml_test(); END;

  Error @: 5 -> ORA-31000: resource 'testcase.xsd' is not a document schema XDB

  You can copy and paste the SP above in your SQL * Developer and run.

  As you can see, the error is thrown at each the 1st statement, here: dbms_xmlSchema.deleteSchema

  Any help would be greatly appreciated. Solutions on similar errors in Google did not help.

  PS: I did some reading and found out that the error above could be because the schema does not actually exist.

  Now, I have changed my PC like this:

  create or replace

  procedure validate_xml_test as

  -Local variables here

  -XML and XML obtained from here: http://www.w3schools.com/schema/schema_howto.asp

  RES BOOLEAN;

  tempXML XMLTYPE.

  XMLTYPE xmlDoc;

  xmlSchema XMLTYPE.

  schemaURL VARCHAR2 (256): = "testcase.xsd";

  number of v_error_at;

  number of v_count;

  BEGIN

  v_error_at: = 05;

  -dbms_xmlSchema.deleteSchema (schemaURL, / * 4 * / DBMS_XMLSCHEMA.) DELETE_CASCADE_FORCE);

  SELECT COUNT (1) INTO v_count FROM user_xml_schemas WHERE schema_url = 'testcase.xsd ';

  IF v_count > 0 THEN

  GOTO label1;

  END IF;

  v_error_at: = 10;

  xmlSchema: =.

  xmlType ("<?") XML version = "1.0"? >

  " < xs: schema xmlns: XS =" http://www.w3.org/2001/XMLSchema "

  " targetNamespace = ' http://www.w3schools.com "

            xmlns=" http://www.w3schools.com "

  elementFormDefault = "qualified" >

  < xs: element name = "note" >

  < xs: complexType >

  < xs: SEQUENCE >

  < xs: element name = "en" type = "xs: String" / >

  < xs: element name = "" type = "xs: String" / >

  < xs: element name = "category" type = "xs: String" / >

  < xs: element name = "body" type = "xs: String" / >

  < / xs: SEQUENCE >

  < / xs: complexType >

  < / xs: element >

  < / xs: Schema >

  ');

  v_error_at: = 20;

  dbms_xmlschema.registerschema (schemaurl = > schemaURL,)

  schemadoc = > xmlSchema

  local = > TRUE

  , genTypes = > FALSE

  , genbean = > FALSE

  genTables = > FALSE);

  < < label1 > >

  v_error_at: = 30;

  xmlDoc: =.

  XmlType ("<?") XML version = "1.0"? >

  " < note xmlns: xsi =" http://www.w3.org/2001/XMLSchema-instance "xsi: noNamespaceSchemaLocation ="'| "'. schemaURL | '">

  < to > Tove < /pour >

  < from > Jani < / from >

  < title > call < / section >

  < body > don't forget me this weekend! < / body >

  (< / note > ');

  v_error_at: = 40;

  -xmlDoc: = xmlDoc.createSchemaBasedXML ();

  v_error_at: = 50;

  xmlDoc.schemaValidate ();

  -If we are here, xml is valid

  Dbms_output.put_line ('scheme is OK.");

  exception

  while others then

  Dbms_output.put_line (' error @: ' | v_error_at |) ' -> ' || SQLErrm);

  END;

  I interviewed SD: SELECT substr (schema_url, 1, 30) schema_url, local, substr (schema, 1, 15) pattern, SUBSTR (qual_schema_url, 1, 100) qual_sch_url of user_xml_schemas;

  SCHEMA_URL LOCAL QUAL_SCH_URL SCHEMA

  ------------------------------ ----- --------------- ----------------------------------------------------------------------------------------------------

  " testcase.xsd YES <? xml version =" http://xmlns.Oracle.com/xdb/schemas/PEGA/TestCase.xsd    

  Now when I run this I get: Error @: 50-> ORA-30937: no schema definition for 'note' (namespace ") in parent ' / '.

  But I gave the XML in the correct format as the XSD.

  The schema declares the document target namespace.

  A valid XML instance should look like this:

  "" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance"

  "" xsi: schemaLocation = "http://www.w3schools.com testcase.xsd" >

  Tove

  Jani

  Reminder

  Don't forget me this weekend!

• 6 acts like there is a dialog box open when it does not Captivate

  Once from time to time, Captivate 6.1 freezes in a project. When I try to click anywhere, I get an error sfx as if there is an open dialog box. However, I don't see a dialog box. When I opened my task manager, there is only one entry for Captivate and it says it's a find running. Any ideas?

  Were you at any time using multiple monitors?  If Yes, then the dialog box may be on the other monitor, which does not currently exist.  If so, hit the ESC key should dispel the apparent freeze.

• Install on windows 8, when IE does not work

  Computer is connect to the internet, but IE does not.

  Type of topic: preferences #advanced< enter > in the address bar.

  Under Advanced, select network.
  Search for configure how Firefox connects and then press the settings button.
  Check the settings.

  Some problems occurs when your Internet security program has been implemented.
  trust the previous version of Firefox, but not more acknowledges your
  update as being approved. Now how do I solve the problem: to allow
  Firefox to connect to the Internet

  • Make sure your Internet security software is up-to-date (for example, you are using the latest version).
  • Delete Firefox to list your program of programs approved or recognized. For detailed instructions, see

  Configure the firewall so that Firefox can access the Internet. {web link}

• Why tell me that Bing is already installed, when it does not exist on my computer?

  I removed the Bing on my computer because I don't like it much. Given that Google has become such a useless piece of junk, I decided to re - install Bing, but whenever I try, I get the following message.
  Quiote:
  Firefox could not install the plugin 'https://addons.mozilla.org/firefox/downloads/file/54407/bing-20090601.xml?src=category' research as an engine with the same name already exists.
  This engine does not see any where on my computer with the exception of an XML file in Firefox/search engines. I deleted but it makes no difference. The files do not appear in Tools\addons, not in all: config. Please don't tell me that Firefox has become as useless as Google... I don't want to use IE.

  Bing must be installed as a default search engine (bing.xml in the folder searchplugins in the Firefox program folder)
  If the file is there and you can't see not in the search engines manage then click on the "Restore default settings" button to restore the default search engines.

  If this does not help, then delete the search.json file and a possible search.sqlite in the Firefox profile folder.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• What is a plateau of DesktopAgent and what happens when it does not work properly?

  When you start Windows Service Pack 3, I get a message saying that DesktopAgent tray is not working properly.  I'm not fallen on what this problem is or causes does not properly.  What is and how to fix?

  Hi Rose @ Minnesota.

  For your information, Agent Desktop tray is a program used by Qwest to update their setup program during installation DSL (digital subscriber line) based on connections to computers.

  Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

• trying to turn on my HP compaq d330 but red light flashes and a beep and nothing does not illuminate

  trying to turn on my HP compaq d330 but red light flashes and a beep and nothing comes up on help a beginner please

  You can try to remove and replace the memory and see if it works.

  If this does not work, delete all except one module of memory (if the PC has more than one) and see if the PC works normally with the chip memory. If it beeps, remove and replace it with the memory you removed and keep doing that until you find the defective memory chip.

• How can I make my internet proxy responding? When it does not?

  my internet is connected but when I open google or other sites like facebook... .the browser say that # check the proxy settings to make sure they are correct.

  # Please contact your administrator to make sure that the proxy server is
  work.  .. .so I made this trial all but it was unsuccessful, so how do I make my internet proxy responding? When it is not responding

  Hey Pritamsituala,

  You have never configured a proxy on your computer?
  This computer is your personal computer, or is it connected to a working network?

  If you have never set up a proxy on your computer and it's your computer, follow these steps:

  • Open Internet Explorer
  • Click on Tools
  • Click on Internet Options
  • Click the connections tab
  • Click LAN settings
  • Uncheck the two boxes that are in the Proxy Server section
  • Click OK
  • Click OK

  Then close and open Internet Explorer to test if you are then able to access the Internet.

  Hope that helps.