"Wait until done" does not stop even if data generation is already waiting.

Similar Questions

• Cannot cancel downlaod, does not stop even when I close the prog and restarts on the FF reopening

  Download Hugin sourceforge completesd ever and is always in the download queue. I can't delete the entry and FF says he's still going whenever I stop. How can I remove this download of permanence.

  Solution was to disconnect from the internet and restart FF. Then I could delete downloads that have been blocked and not suppressible when online.

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• E540: Fan does not stop

  Hello Board and support team!

  The fan in my e540 does not stop once it began to turn. It is completely independent of the system temperature. Even if the room temperature and the cpu is less than 40 * C the fan will not stop.

  The fan does not always turn, however. If I wake up the system from sleep mode or turn it on, the fan does not turn and will not start spinning until a certain threshold temperature is reached. This part of the fan control works correctly.

  Interesting procedure: I work until the heating system and the fan starts. I waint until the system is cooled below 40 * C (checked with software speccy, the flow of air leaving the laptop is cold). The fan is still running at this stage and will turn probably forever. I suspend the laptop (no full stop not required). I immediatally 'wake up' the laptop (temperature of the system has not changed, no time to cool). The fan is off again and will not start turning until the temperature threshold is reached.

  What can I do to fix this? I don't always want to suspend my laptop to turn off the fan. She has to stop on its own.

  
  

• my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

  my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Step 1

  VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

  Step 2

  When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Step 3

  In the LaunchDaemons folder, there may be one or more files with the name of this form:

  com Apple.something.plist

  When something is a random string, without the letters, different in each case.

  Note that the name consists of four words separated by dots. Typical examples are:

  com Apple.builins.plist

  com Apple.cereng.plist

  com Apple.nysgar.plist

  There may be one or more items with a name of the form:

  com.something.plist

  Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

  These names consist of three words separated by dots. Typical examples are:

  com.semifasciaUpd.plist

  com.ubuiling.plist

  Sometimes there are items (usually not more than one) with the name of this form:

  com.something .net - preferences.plist

  This name consists of four words (the third hyphen) separated by periods. Typical example:

  com.jangly .net - preferences.plist

  Drag all items in the basket. You may be prompted for administrator login password.

  Restart the computer and empty the trash.

  Examples of legitimate files located in the same folder:

  com.apple.FinalCutServer.fcsvr_ldsd.plist

  com Apple.Installer.osmessagetracing.plist

  com Apple.Qmaster.qmasterd.plist

  com Apple.aelwriter.plist

  com Apple.SERVERD.plist

  com Tether.plist

  The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

  If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

  Step 4

  Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  Step 5

  The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

  Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

  Step 6

  This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

• Simulation does not stop in the Loop Simulation & control

  I'm working on a settlement in a loop of control & Simulation. I created a State space model and an inside observer.

  Now, I've implemented nearlly all, but now the simulation does not stop.

  First here is a picture of the .vi when it still works:

  

  But this isn't the end result, I want to have.

  I want to connect the output of the subtrahation (2 x - y) at the entrance to the exterior product.

  You can see from the image below:

  

  If I do, my continious simulation and never stops. The simulation time is always set to 10 sec.

  The .vi is attached. I hope someone can help me.

  I don't understand your suggestion. I've set up a node of your comments, but this does not solve the problem.

  But I found another solution to the problem. I build the .vi completely new and used the arithmetic of the design group Signal and control Simulation. The gain block and the summation block works better in my case that digital add and multiply the blocks. Now, the tracks of the simulation and the regulation works well.

• Why the STOP button does not stop this vi?

  Hello

  I took an example of Labview 2011 called "soul hollow period-Low Freq 1 Ctr.vi. This example vi measures one period, but, I want to measure the period over and over again, so I put it in a WHILE loop, but the STOP button does not stop at the vi.  Instead, I have to use ABORT to stop the vi...

  How can I stop this vi?

  Dave

  It does not replace the time-out.  The while loop is a separate beast from the meter reading.  You wouldn't want your loop due to always make you miss the error messages, would you?

  Usually just clear the error message of time-out on the counters.

  You get the message twice because the loop runs in fact twice.  The first time the stop button is read as false as soon as the loop begins.  Then you click on it.  At the same time that it takes 10 seconds for the timeout counter to occur - when he does it gives you the error.  Then, the loop runs again.  This time it reads the key stop as true, because you clicked on it during the timeout of 10 seconds of the last loop.

  A time loop allows everything inside to complete execution before the end, then you will have to wait for an another timeout of 10 seconds to occur which produces another error.

  Unless you need a measure of very, very low frequencies I set your time-out to a more reasonable number and simply erase the mistake if it matches 200474.

• Windows xp does not stop running, if you click on < close > to stop computer. How can I

  My Windows xp does not stop running, although I clicked on to stop to the bottom of the computer.

  I tried , but does not work.

  How can I recover the system quite the same for the last available time.

  Thank you

  Hello

  1. don't try to start the System File Checker?

  If not, then I suggest you to run that and then try to do system restore and check.

  Let us know the results.

• The 4.0.5 unit does not stop

  When I click on tne * unit * Stop button in the system tray, I have an error message in the viewing Application event log:

  ===

  ID: 1054

  Source: CiscoUnity_CsServices

  Message: AvCsGateway: StopCs failed, no access to %1 with the type of Subscriber = %2 (err = 3%). A Subscriber associated with %1 must have administrative access.

  ===

  http://www.ciscounitysupport.com/find.php?EvtID=1054&EvtSrc=CiscoUnity_CsServices

  ===

  and the unit does not stop.

  I don't know why it happened.

  He has worked previously.

  What should I do?

  Fact on behalf of your connected to the server with have a unit administrator access? Try to do a right-click on the icon and clicking on system administration and see if happens fine. You may need to check the account that your registration with is an administrator of the unit always and/or AD rights for this user. Perhaps something has changed.

• DELL Inspiron N5110 does not stop and does not wake from sleep

  Hello.

  I have Dell Inspiron N5110, who cannot stop it in Windows 7 or Ubuntu Linux. Specifically, I started Ubuntu Live from CD to eliminate the possibility that the problem is in Windows 7. Stop in Ubuntu does not work either. This proves that the reason for not an application in Windows that remains suspended and does not allow the laptop to close.

  The laptop computer may not wake after sleep or either Hibernate.

  I tried all the solutions that advised you to all the other people in the forum who have the same problem.

  1. the laptop cannot stop mode safe either.

  2 may not stop even after clean boot Mode - all services disabled and all package disabled Startups.

  3. I haven't tried to change the Power Options Advanced "Allow hybrid sleep" - both WE "On AC Power" and "Battery operated" - no change.

  4. I tried to install the latest NVIDIA video drivers. This did not help either.

  5 running only on battery change nothing - not cannot always stop.

  6 race only on AC adapter without battery - still cannot stop.

  7. I tried to remove the AC adapter and the battery, and now the POWER button for 30 seconds to RESET the phone - did not work.

  ATTENTION: I have read your forums all day and has seen at least 10-15 reports on the same problem, and not a single case fixed.

  8. This is why I have not tried Flash the BIOS with the latest version - I have read other people who have tried and it didn't work either.

  9. I loaded the BIOS default settings (F9) - stop still can't.

  NOTE: Change something in the BIOS and getting out once caused the laptop to freeze and I had to power off by holding button for a longer time.

  10. I ran DELL Diagnostics menu Boot (F12 at startup) - no error found.

  11. I couldn't find IEEE 1394 adapter in Device Manager to change the power management settings.

  In fact, none of the suggestions that you can give to change something in Windows is logical because I already mentioned that stop in Ubuntu does not work or the other.

  The question seems to be either in BIOS or a hardware problem. But which component? This is the CD/DVD drive?

  It is a new laptop.

  Please advice how to proceed. If you know which component fails please tell me.

  Remove the keyboard and palmrest (dell guide shows you how) and you should see a small button battery. Remove it at least 10 seconds, then put back. Enter the BIOS and make sure that there is nothing weird was changed. It should work fine now. I had this work in Ubuntu 12.04 these last days with no problems.

• October 2014 GI OJVM PSU Combo - 'auto opatch apply' t - it does not stop instances DB?

  October 2014 GI OJVM PSU Combo - 'auto opatch apply' t - it does not stop instances DB?

  () 19791428 fix / p19791428)

  
  

  Our process for patching Oracle 11.2.0.3 GI has not changed for many patch cycles. But I have a few questions about the PSU process October 2014 "Combo" GI which includes OJVM. We will test on the instances of laboratory first, but I wanted to see if somebody beat us to the application of this power supply and can share an overview.

  Our environment:

  Oracle grid Infrastructure 11.2.0.3.11 (no CARS; used only for ASM / Oracle Restart)

  11.2.0.3 multiple databases of instances per unique host (Redhat Linux x 86-64)

  We always manually stop EM agents then changed directory to the level root the dir containing the decompressed PSU and run opatch auto - and run as root, if system administrators grant us temp privs root on a given day. Then:

  opatch auto/home/oracle/patches ocmrf - /u01/app/11.2.0/grid3/OPatch/ocm/bin/ocm.rsp

  For post-install, restrict us the stopping, starting, run catbundle.sql, and then 'change the system disable restricted session.

  Fast forward to October 2014 GI Combo PSU just released, README Section 'Installation of the patch 2.4.

  Step 1: bring down the database on all nodes using the "svrctl stop database...". ». First of all, we will never that. What is a RAC only step? "opatch auto" always stop all Oracle services necessary for us, with the exception noted above, agent of the EM. Don't skip us this step for a GI but not RAC configuration? Again, we use only of GI for ASM.

  Step 2: cd in a patch numbered directory (in this case, < patch Home > / 19791428). A bit different than before, but not confusing not.

  Step 3: opatch auto apply - ocmrf < com answer file full path >.

  Significant for adding 'applies' here in auto opatch syntax? Maybe it was always there, for example July 2014 patch cycle, and I never noticed...

  Step 4: cd to a subdirectory of the directory of numbered, for example < patch Home > patch/19791428/19282015

  Step 5: patch OJVM apply:

  opatch apply - local

  "Affixes Opatch - local" also run as root?

  Step 6: repeat step 2 to 5 on all nodes; Since we GI but no CARS, so there are no other nodes.

  Step 7: the last node, elevate dbs on all nodes via 'svrctl start the database '. Believe that we would skip because we are not CARS.

  Go to Section 2.5.2: loading modified the SQL files in the database

  1. start each instance then run @postinstall.sql - what is new. It seems also new on him must START each instance. In our last round patch "opatch auto" always showed all Oracle services, including any proceedings. So before our catbundle.sql, we run generally restrict us the stop and then start. "Opatch" behave differently for for example not restart us during this cycle of fix, all Oracle services when you are finished?

  2. run catbundle.sql for each instance; par for the course.

  Thank you.

  Dana

  
  

  I made the correction today. The statement does not.

  as root, do 1,2,3

  as oracle do the rest.

  should be automatic without apply.

  hope this helps.

  HP

• Database does not stop

  Hello
  10g R2 on win 2003 server, I issued
  
  STOP IMMEDIATELY,
  but it does not stop and Alertlog I:

  Job queue slave processes stopped
  All dispatchers and shared servers shutdown
  Mon Apr 19 13:33:45 2010
  ALTER DATABASE CLOSE NORMAL
  Mon Apr 19 13:37:09 2010
  Thread 1 advanced to log sequence 5316
    Current log# 6 seq# 5316 mem# 0: D:\BASE\MYDB\UNDO\REDO06.LOG
  Mon Apr 19 13:38:47 2010
  Waiting for smon to disable tx recovery.
  Mon Apr 19 14:18:21 2010
  Thread 1 advanced to log sequence 5317
    Current log# 4 seq# 5317 mem# 0: D:\BASE\MYDB\UNDO\REDO04.LOG
  Mon Apr 19 14:43:57 2010
  Thread 1 advanced to log sequence 5318
    Current log# 5 seq# 5318 mem# 0: D:\BASE\MYDB\UNDO\REDO05.LOG
  Mon Apr 19 14:59:22 2010
  Thread 1 advanced to log sequence 5319
    Current log# 6 seq# 5319 mem# 0: D:\BASE\MYDB\UNDO\REDO06.LOG
  Mon Apr 19 15:16:56 2010
  Thread 1 advanced to log sequence 5320
    Current log# 4 seq# 5320 mem# 0: D:\BASE\MYDB\UNDO\REDO04.LOG
  Mon Apr 19 15:33:31 2010
  Thread 1 advanced to log sequence 5321
    Current log# 5 seq# 5321 mem# 0: D:\BASE\MYDB\UNDO\REDO05.LOG
  Mon Apr 19 15:50:13 2010
  Thread 1 advanced to log sequence 5322
    Current log# 6 seq# 5322 mem# 0: D:\BASE\MYDB\UNDO\REDO06.LOG

  What's your idea?
  
  How can I stop it?
  
  
  I can not connect:
  

  D:\>sqlplus sys@MYDB as sysdba
  
  SQL*Plus: Release 10.2.0.1.0 - Production on Mon Apr 19 16:06:29 2010
  
  Copyright (c) 1982, 2005, Oracle.  All rights reserved.
  
  Enter password:
  ERROR:
  ORA-12518: TNS:listener could not hand off client connection

  Thank you.

  Stop immediately stop new connections to the database, new transactions, disconnects the non current sessions and restores all existing transactions. The key here, seems to be rolling back existing transactions. It may take some time if there was any significant transaction or long term to cancel. What you can do, before issuing a judgment, is to check v$ transaction column used_ublk to see if there is a session using a large number of undo blocks. The blocks to cancel more in use, the longest closure will be.

• Firefox seems to have recently developed seemingly random usually do not remember bookmarks, particularly when the pc does not stop correctly. Thank you

  Firefox seems to have recently developed seemingly random usually do not remember bookmarks, particularly when the pc does not stop correctly. Thank you

  If Firefox detects that the places.sqlite database is corrupted then Firefox can create a new database file and import bookmarks from a JSON backup that does not contain the most recent bookmarks (a new JSON backup is created when you run Firefox for the first time on a day), then you may lose the bookmarks in such a case.

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

• Satellite A500D - fan does not stop

  Hello

  Two days ago I updated the Bios to version 1.20 win, and since then, the fan is constantly at 72% and the temperature of the CPU at 36 º.

  At Toshiba, I say it is normal, but the fan does not stop at any time and the noise is annoying.

  Anteriormento updated the BIOS, the fan stopped and started and never surpassed 54%.

  Looks like a vergueza by the care service, they have given me, I tried to deceive, as is normal for a portable fan that keeps 72%.

  Please I need someone to tell me where I can download before my Bios and how to install it.

  PS: My processor ens Turion Rm-77.

  A welcome message

  Hello

  You mean the cooling module fan didn't run all the time with the previous BIOS version?

  Well, in this case you must downgrade BIOS to the previous version.
  The problem is that you can download the latest version of the BIOS from the Toshiba page.

  But maybe a Toshiba ASP might help you and may downgrade the BIOS to the previous version

  But have you tried to change the settings in Win 7 power option?
  You can find it in the control panel-> power options

  There you can change modes of single power supply.
  In the power settings advanced, you'll find settings Toshiba energy saver and there you can change the method of cooling while the laptop is running on battery or power.

• Tecra M3-264: the fan does not stop

  Hello

  I have a labtop Toshiba Tecra M3 264, it's wonderful BUT,.
  The fan does not stop and this sound is a bit noisy in comparison with the other all I have.

  Is this normal in this model or should I take it to the service?

  Hello

  It is normal activity on new laptops cooling fan is very noticeable on older models. I recommend you to check what happen if you change the settings of cooling method in power management.

  By the way: allow the unit to take a breath. Make sure that the ventilation openings are free and that there is nothing that can stop the flow of air. If the vents are dirty and full of dust, it can also be responsible for cooling fans runs often and with a higher speed.

  Good bye