A break of a composition of AutoPlay

Similar Questions

• Video playback in composition with AutoPlay

  I have a composition that has three different slides, I want him to play on auto-play when you enter the website. The third slide contains an integrated video Vimeo in - when you click play on the video, keep the AutoPlay on the slideshow, so you can see the first two seconds of video before they were taken to the next slide.

  The only two ways to fix what I see are to disable AutoPlay, which kind of defeats the purpose of having the slide show it in the first place

  Or to stop AutoPlay when it has cycled through three slides, so you're on the video - which, as far as I can see, is impossible.

  Is there another way to do this?

  Thank you

  SoC

  Hi Rob

  With autoplay, yes the slide will change to the next slide, unless you use a custom coding to stop the video at the same time slide changes.

  As you mentioned disabling performance automatic is not an option for your project and you also want viewers to see the video before the slide changes, a workaround can be made.

  Create a short form of the video, as an intro video for a few seconds and set the transition speed of composition that video is complete before the change of slides.

  You can adjust the speed of transition to the full video even complete, but once again that applies on all slides to stay on the screen.

  So the idea would be to create a video Intro that would fully play until the slide changes and for the full version of the video, insert the video on a new page and the hyperlink in the page with a text for the full video in the same blade where users can click for the full video.

  Not an exact solution, but can be used as a workaround!

  Thank you

  Sanjit

• Create a viewer that starts without trigger

  Hi, Im trying to create a landing page that initially start automatic with a viewer with information, they can shut down and display the page. It s possible?

  You can use compositions with AutoPlay feature where the container target automatically appear on the page when the page loads. Impossible to initiate lightbox effect with autoplay on page as it requires mouse action.

  Use any other position and then apply autoplay that display the content on the page loading.

  You can use composition to create a moment of autoplay popup and the installer that will be exactly like a delayed pop-up.

  Check out this video to learn more:

  http://www.YouTube.com/watch?v=Ufsz0V_CRLw

  Thank you

  Sanjit

• Muse Composition AutoPlay does not work when published

  I have set up a blank publication in MUSE widget to AutoPlay. It autoplays fine in preview mode, MUSE and in the preview in browser mode. But now that I published it online, it is not auto-jouer.

  I publish the html code in DreamWeaver and ftp to my server from there. I have made many other sites in this way I know pretty well how to publish them this way.

  Here is my site, if you are dialing, you can not see because I'm reload from scratch again and again until this I got this figured out, but try it anyway you please:

  http://christianhomebusinessassociation.com/index.html

  In preview of MUSE modes the first image appears with a trigger of color yellow because the active state is set to yellow, and then it starts just to auto play from there. But not in my browser. I tried several different browsers and on a mac and pc, and it is not auto-jouer anywhere.

  My settings in MUSE are:

  Position: stacked

  See setting targets: bearing

  Hide targets: no

  Transition: discoloration

  Transition speed: 1.5

  AutoPlay: 4

  After: 3

  Play once: not clicked

  Others... not important.

  In my opinion, it worked when I first downloaded it. Then I must have missed a few hours. When I got home and made up to the top of the page, it was not transition automatically more. I thought that it was like an animated .gif can fail to slow down after a while so I deleted my browser cache for the day and refresh the page, but it won't play again. Then I tried in different browsers and on a different platform, and I just don't want to auto play online.

  Since then, I have re - check to see if it still worked in MUSE and Yes, it's the reading automatic always in States of the preview. So I reuploaded ALL html code, images, scripts, etc. and still does not.

  Please notify.

  Thank you!

  Hi Claudia,.

  The website link that you shared doesn't work (error: 404), please share the direct link or the .muse file.

  To share the .muse file, download the file to any file sharing site and share the download link with me in private message.

  Thank you

  Prabhakar Kumar

• How can I edit HTML source in the composition?

  I often compose emails that contain bulleted or numbered lists multi-level, images and other elements inserted. Sometimes, Thunderbird fails to go down to the correct list between paragraphs or breaks, or it crashes or removes the part of my message when inserting an image. I found workarounds, but it would be helpful to me if I could see the HTML code and manually change in composition, as I can with the received messages (view > Message Source). I have not yet found a way to do this.
  Otherwise, I could compose the message in Dreamweaver and copy it into my e-mail, but I could create some tags that are not supported by Thunderbird.
  Please suggest how I can edit the HTML code before sending my message.
  Thank you
  -Richard

  A quick way is to select the body of the message (Ctrl-A to select all), then insert/HTML. Alternatively, use an add-on like EditHtml. As you suggest, copy html to an external editor is likely to cause problems.

• A more successful experience in the creation of UIs compositable configuration dialog boxes

  A few weeks I posted an experience in creating user interfaces using sub-panels transparent compositable. The approach can be described as, "It was less remarkable for being novel."

  Today, I write another attempt, this one along more traditional lines, and a lot more successful. Notable: this can be any arbitrary composition of this last AND it solved the problem of order TAB.

  This solution uses an image control and makes copies N of a control. When the user moves a control or move the mouse over the control, a real control slides in this position to be able to catch the events (updated mouse more attract State, highlight to the keyboard focus, manage typing, etc.). If the value changes, a master data table is updated and the image control is updated.

  It is something that has been tried in various forms in the past, but there are two aspects of this particular implementation that make nice:

  1. its programming interface for specifying the behavior of objects should make it fairly easy for a user of the framework generate dialog boxes programmatically
  
  
  2. It handles the problem of TAB without flickering, something I've not seen in other attempts

  This idea creates conversation about previous experience - thanks to those of you who have posted on various forums, e-mail me, or, in some cases, showed up at my office. That last is not something I am encouraging unless you work at OR... just saying. :-)

  Now, this experiement has already donnГ an interesting conversation. We note that, as long as the controls are instantiated independently of each other - in other words, any property of a control depends on the property of another control - this system of dialogue is progressing well. But in this experiment, I implemented the option button, which interact with each other - when set to True, the other false go. As soon as the controls are starting to interact with others (such as aging a control when a checkbox is disabled, or with expandable sections or really complex cases like updating a chart as a change in options, as happens in some config dialogs Express VI) then we leave who need ways to make reference to other controls. That leads us quickly in one of two directions: name the controls or creation of references. The naming approach is certainly my preference because it fits better with the data stream and I can make interesting effects with breaking apart some of the tree. But it quickly starts sounding like "Please implement a XAML parser in LabVIEW." For those of you familiar with XAML, in the world of user interface design, it could very well be the best thing since sliced bread. A XAML string would fit well with the data flow, and we could start that accumulate. I am reluctant to go down this road for two reasons. One, many have noted, it is really not a good library written in LabVIEW that can give me a useful analysis of XML DOM tree. Two, it is a huge project and my gut sense is that you need to fill a pretty big part of it before you would start to see any return on investment. But it is worth thinking to-I could be wrong. Wouldn't be the first time. This code I posted today can at least help you get started on the side of the generation if one of you decides to become laborious.

  I'll have my attention away from this project for the time being, coding in G is a lot of fun, and I wish I could spend several days to do, but this has been a side project and it is time to return to my projects assigned in the programming of text. Building a powerful platform for the automatic generation of user interface in LabVIEW would be really useful - I see a lot of requests for this sort of thing, and other languages are ahead of us in this area.

  [Last updated 17/05/2012 - there is an improved version.]

  This isn't a question. It doesn't have an answer.

• Unique column index index composite vs

  Hello

  I have a table with a, b, c, d, e, f, g, h, i, j, k columns and I have an index on columns a, b!

  There is a sql statement now with where a =?  and one wonders if it could also be good to add a unique index on just 'a' column!

  does not AT ALL help? It does not help in SOME CASES? or?

  What do you think??

  Thank you!

  / Hesi

  HeSi9466 wrote:

  I think, in general when you have a composite index as (a, b) and you have a query as where a =? Then, this composite index is sufficient and you don't need to also add a unique index.

  But... I think that this response CANNOT be a final answer for all possible combinations of data.

  For example, if the leader index column (a) has a low number of distinct values and the second column (b) index has a large number of different values then a query that seeks where a =? could be better with a single (one) index a column.

  My point is, it must be tested and could not say NO, UNIQUE INDEX number IS NECESSARY at all.

  The basic answer is that you need NOT the index of single column if you have the index on two columns.

  The answer is complex, is that you may need to spend some time and effort to ensure that the index of the two columns is used in all cases where it would have been appropriate to use single-column index. This can average simply ensuring that the clustering_factor in the index is adjusted properly so that the optimizer 'love' the index enough and/or you need to change code to use the cluster_by_rowid indicator (when you are 12 c) so that you do not suffer a running performance impact.

  Key factors: the index of the two columns will be physically larger than the single column index - this will increase the (optimizer estimated) operating costs; the index of two_column clustering_factor will almost certainly larger than the single column index clustering_factor - this will also increase the (optimizer estimated) cost of its use. Both of these echo run time: two column index will be bigger, then you will have to do more work to read the relevant ROWID, and if you walk two-column index in order for a given value of the first column, you will visit the blocks to the table in a different order from the order of the visits of the unique column index - this can lead to the application doing more work running.

  The variation in counts of leaf_block index is often negligible (especially if, as per your example, the number of lines - blocks so in the table - is large); the impact of the clustering_factor can make a huge difference for the calculation of costs; but you can often work around this problem. In 11.2.0.4, in particular, you can use the dbms_stats.set_table_prefs () call to set the parameter "table_cached_blocks" a table for all of its indexes seem more desirable to the optimizer.

  Bottom line - you have not the single column index, but if you have it and want to break down human effort needed to do so that it can be placed without side effects can make you decide to keep in any case, especially if it seems not be the cause of any competition or other overhead of performance.  If you haven't yet, then you should not need to create.

  Concerning

  Jonathan Lewis

• Problem with Menus in MUSE and Composition Widget

  I seem to have some sort of problem in script when my site MUSE publishing.

  I created a blank publication in MUSE to AutoPlay widget. It autoplays fine in preview mode, MUSE and in the preview in browser mode. But now that I published it online, it is not auto-jouer. In fact, even when manually click you on the slider it won't move the frames to the next. I have 8 put frameworks in place and the images are all published on my server in the pictures folder.

  I create horizontal menus and the last two have submenus. They come down and discover very well when hovered on, in the two preview modes in MUSE just fine, and after I export my HTML and my browser shows the preview of the site before online publication, as does the cursor.

  But then...

  I publish the html code in DreamWeaver and ftp to my server from there and the cursor of the composition and function of drop-down menus. I have published several other sites of the MUSE in this way so I consider that I don't know how to post them this way.

  Here is a page that is published with the inactive elements on it:

  http://christianhomebusinessassociation.com/Tester.html

  In preview of MUSE modes the first frame of the composition appears with a trigger of color yellow because the active state is set to yellow, and then it starts just to auto play from there. But not in my browsers when published. I tried several different browsers and on a Mac and PC, and it is not auto-jouer anywhere.

  My settings in MUSE for composition are:

  Position: stacked

  See setting targets: bearing

  Hide targets: no

  Transition: discoloration

  Transition speed: 1.5

  AutoPlay: 4

  After: 3

  Play once: not clicked

  Others... not important.

  I recreated these elements and re-uploaded the whole site from scratch again and again and cleared caches and cookies and refreshed, and I don't think it's my browsers that are the problem.

  I checked my folders on the server and all the folders and their content is on my server that MUSE is published in HTML format. I noticed that there are no images little pre-loader download MUSE in my pictures folder. Not sure if the submenus drop down need those too? But that should not prevent the operation of the slide show manually in any case I think!

  Regarding the scripts themselves, 11 scripts were exported from MUSE and I checked and 11 are on my server.

  I also thought maybe it was a layers deliver. But this should not stop the cursor to go into action automatically, either on the layer above or not. That could make unclickable, but do not stop it working. If it was a matter of layers too, so you should not work properly in the preview in browser mode, which these two questions very well work in. And, my menu is on the top layer, so this does not explain it is a malfunction.

  Please notify.

  Thank you!

  Well ~ I did a test and uploaded my site through Business Catalyst online then everything worked fine there. So, I ended up calling support MUSE.

  Support suggestion was: rather than use DreamWeaver to upload my site via FTP, I use the option just download on my server using the ' Upload FTP host"under the"File"menu."

  This fixed everything! All menus are going very well now, and my cursor to MUSE on my test page works too. Even if I have a current third-party cursor on my home page.

  http://christianhomebusinessassociation.com/

  She said that it seemed for some reason any DW became not all files that it needed to make my site work properly. Then maybe a new bug? Who knows?

  In any case, my site and all of its components work perfectly now ~ yay! Hope this helps someone else!

• Mix of framework (optical flow) Composition, so I did not collapse Transformations?

  Hello

  So I think I get that if you want to time a model, you must define pixel motion for images in the preComp then collapse Transformations and assign Pixel Motion, because you can not FrameBlend a model more.

  But what happens if I don't want to do that, because it would break other animations?

  Is the only way to use the time warp effect?

  Is there an easy way to link with time-remapping, so it can be applied to a existing built, comp time remapped with pre nested compositions using effects, I don't want to collapse?

  Or is it a new way of thinking.

  Is there a tutorial somewhere on this subject?

  TRIS

  because you can not FrameBlend a model more.

  to my knowledge, there has never been an option to use the native frame of mixture for a demo. only for images.

  If you want to time stretch a model, you must define displacement of the pixels for images in the preComp then collapse Transformations and set it to the displacement of the pixels

  If you want to use the native mix frame (temporal, time remapping) then YES

  But what happens if I don't want to do that, because it would break other animations?

  Is the only way to use the time warp effect?

  You can always make you composition and re - import (also called prerendu) and now it's pictures you can use native on interpolation. If you do not use Timewarp, you can also use a plugin of 3rd party like the critically acclaimed Twixtor - RE: Vision Effects . If you need control actually more, even if you have a merge option setting, you would use Timewarp or 3rd party plugins.

  Is there a tutorial somewhere on this subject?

  TimeWarp and Twixtor - more than you can count. on TW-, it's my personal workflow:

  1. Firstly - I put the timeline to display pictures and not in seconds

  

  2. then I add layer time remapping

  

  3. Add the effect of TW and set it to executives, not speed

• Going to need help to get my new composition

  I use AE 13.7.   I'm very new to AE, and essentially I learned by doing, as opposed to the meeting through tutorials without end that does not give me answers my questions.

  So, here are my questions.

  1. when I open a new composition, I choose the height and width.  How can I know what they are supposed to be?   I guess I have to choose the dimensions based on the video I'm importing, but do not know how to find this information.

  2. once I imported a video file and hung out with success since the upper left corner in the main typing area in the center of the screen, I can either press the SPACEBAR to start my video or switch to the preview in the upper right quarter and press Play.  But once I get the video to play, he just moves along.  I noticed that as the blue indicator now inches along, it leaves a thin horizontal trace of green or dark blue line.  I have deduced that this has something to do with how much of the video is actually recognized somehow by AE, because if I try manually move the CTI beyond the blue or green line, breaks down the video.

  I guess that there must be a step or two that I'm missing here.  I think that the video, once imported into a new publication, would be immediately available in its entirety.  What I'm missing or doing wrong here?  Thanks for your help!

  1. when I open a new composition, I choose the height and width. How can I know what they are supposed to be?

  Depends entirely on your target output specifications and your workflow. Of course we'd take a HD for broadcast television, other presets for other stuff. This may be the same as the input source, but not necessarily. Still nothing prevents you to create arbitrary comp sizes when they are needed for example to the compositions nested when creating the project. It is not uncommon to create for example compositions of towel-long /-wide for all kinds of scroll, Parallax and effects just panorama regarding the effects of particle instance can a model of aspect square small pixel size to be used as custom particle shape. Beyond what I said in the first sentence as there may be a definitive answer in marble.

  2. once I imported a video file and successfully... [snip]

  Uh, well... You know, I would scream in your face if you stood in front of me. Sorry, there is no other way to say it, but that's all just a thing ' Why oh why don't people read the help? How preview of AE and caching system works is carefully explained here, including what those fancy color average.

  What I'm missing or doing wrong here?

  According to the above: do not read the help files is your greater negligence.

  Mylenium

• composition costumize Widget

  I created a widget of composition on one page, that autoplays. In the Panel options, I checked 'PLAY ONCE', however, if I do this, the widget is not auto playback at all.

  I want to do is have the composition appears automatically (it does if this 'play once' checkbox is unchecked). When the user continues on another page and return to this page, I don't want it to play again.

  Support always told me that in the widget, it is not possible to what I want, but I have to change by changing the code?

  Does anyone know the code that I can put it in via html? Thank you!!

  Any persistent info does not store the widgets or vanilla HTML. You can use cookies or a JavaScript that checks the history State and triggers the widget accordingly or deactivate it. Neither of the two methods are 100% foolproof in their simplest form, either, however. Unique identification would require more code and things like a unique hash value. Ultimately you'd add a lot of extra code to your site, so my advice is to simply abandon the idea. Be re-design your page to be less intrusive and not have all the bling-bling or leave it as what.

  Mylenium

• Why only a single composition plays when there is more than one on a page after you refresh?

  Open Wrapper.html. In it, I have 2 composition (test1 and test2). Both are on autoplay and when I saw everyone on board animate the work very well. It's just when I connect the two compositions in a new document, it gets glitchy. The first charge that both will play, sometimes only plays at halfway. After that updating of the composition that one page plays, the other gets stuck on the first image.

  Dropbox - test.zip

  Is this a bug? How can I do to make the two play normally at the same time?

  Hello

  Files repaired ==> test - 4.zip - box

  You need to clean the panels of your script: the two files.

  

  Then wrapper.html works well.

  A small error with file wrapper: an only div.

  

• How to control the timeline in multiple compositions.

  I want to control the timeline in a different composition.

  There are two compositions.

  There is button in Comp1 and there are 3 seconds animation in Comp2. (Not AutoPlay)

  If I click on the ordi1 button, play timeline between 1 second in Comp2

  

  This type of workflow will work if you have these two composition inserted in a simple html page.

  And you can add the code below in the click handler during the creation of composition 1:

  stg2 var = Edge.getComposition("EDGE-ID_OF_COMPSITION_2").getStage ();

  Stg2.play ("label_in_composition2");

  HTH,

  Vivekuma

• Get a slide at the break for YouTube, then Auto Advance

  I try to include a YouTube video on a slide in Captivate 8, having the video AutoPlay, then have the advance of the blade when it is done either when the user clicks a button. I don't want to make a fixed length, since I can't be sure how long last the video to start.

  There is a file CPTX link below that has the problem. If I take the key out, the slide advances automatically after 3 seconds even if YouTube does not. When I leave the button, slide breaks, but he won't answer when I click on the button.

  Help!

  https://www.dropbox.com/sh/0d1k8gy5qc714og/AAAypxk-7IzP5bUbyJlWA6_Ya?DL=0

  Hello

  Go to the properties of the slide > under Actions > on enter the Show Widget value and output value go to the next slide.

  Then preview it and see if that makes a difference.

  Kind regards

  Ajit

• Is there an easy way to import controls of standard video playback (rewind, pause, play, fast-forward) in a composition of edge?

  If there is something that I can just import the video standard controls playback (pause, rewind, playback, fast forward), it would be very useful.

  punzelda wrote:

  From what I can tell, these controls are only for imported videos, not for the composition of the Board itself, which is what I'm looking for.

  Your original question did not mention that you wanted FOR the composition of edge iteslf, my apologies for the misinterpretation.

  You should be able to import any video control desired 'like' graphics and apply appropriate reading events.

  So for a graphical game would be something like sym.play(1000) ();

  For the Stop: Sym.stop ();

  Ditto for the break.

  As a reminder, it would be like sym.playReverse ();

  I'm not sure to fast forward as it will require some additional script changes.

  Darrell