a buffer on which has corrupted the internal status of programs has been detected. Roxio

Similar Questions

• I have the latest version of Firefox are installed (which has been updated), but the site says that it is the older. Is there a solution for this problem?

  I have the latest version of Firefox are installed (which has been updated), but the site says that it is the older. Is there a solution for this problem?

  You have a corrupted user agent which identifies you like Firefox/3.0.11

  • Mozilla/5.0 (Windows; U; Windows NT 6.1; UK; RV:1.9.0.11) Gecko/2009060215 Firefox/3.0.11 WebMoney Advisor

  See:

  • https://support.Mozilla.com/kb/websites+or+add-ons+incorrectly+report+incompatible+browser
  • http://KB.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default

• 64 bit sytem with vista home premium which has been randomly locking up and freezing. The error is event 6008.

  I have an ACER aspire x 3200 64 bit sytem with vista home premium which has been randomly locking up and freezing. The only mistakes were event 6008 with a description of the stop system prior to (time) on (date) was not planned.
  When these errors originally occurred, I returned the system to acer and they installed a new hard drive. After updating the vista system blockages continue 30 times over a period of 3 months. Acer sent me a new disk image on 3 disks that I have installed and updated on 11 October. There is no blocking until the 10/27, 10/28, and for the 3rd time today.
  The closed unexpected gives a blue screen if I use the locking system to the top. I have to hold the power to restart when the system crashes.
  Can someone help me solve this problem?

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.  But I guess it's too late for this for so long that there are probably no so old restore points.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

  If this does not work, then please post repetitive errors in Event Viewer on the stop (Start / Control Panel / administrative tools / Event Viewer).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.  From what I understand, there is none of the events (which surprises me because a freeze should certainly generate an error event).

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work (but you NEED a disc).  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  Good luck!

  Lorien - a - MCSE/MCSA/network + / A +.

• How to get rid of the initialization-corruption error has been detected in the settings feature Manager?

  Dear Sirs,

  I get a sprint of initialization error - Corruption has been detected in the feature Manager settings, backup file has been loaded.  I followed the suggestion of running the System File Checker.  Nothing has been found.  So, how do get rid us of the error of initialization of the sprint, while the computer starts up normally?

  Michael (ernestsmithxp)

  Hello

  Contact the manufacturer, click on the link below.

  http://www.att.com/eSupport/article.jsp?SID=KB91761&CV=820#fBid=QIl1GDML7-W

  If the link does not work please contact At & T for that matter.

• How can I reinstall the demand for 'People' in windows 8, which has been accidentally uninstalled by me?

  How can I reinstall the demand for 'People' in windows 8, which has been accidentally uninstalled by me?

  You can reinstall it from the following link:

  http://apps.Microsoft.com/Windows/en-us/app/mail-calendar-and-people/64a79953-cf0b-44F9-b5c4-ee5df3a15c63

• Please help to cancel my subscription of single-app creative cloud for Acrobat Pro (at least) which has been subscribed by mistake and now I am penalized for her 3 months. Cannot find the plan tab Cancel in adobe India website

  Please help to cancel my subscription of single-app creative cloud for Acrobat Pro (at least) which has been subscribed by mistake and now I am penalized for her 3 months. Cannot find the tab cancel the plan to manage the website of adobe India tab. Help, please...

  Cancel your membership Adobe Creative Cloud

• How do I configure Openfiler for ESXi 5.0 (on which has been installed in the workstation).

  9.0 pre-installed VMware I installed in my laptop. I created a 5.0 as a VM ESXi in workstation. And I installed vSphere client 5.0 in my laptop. And I am able to access ESXi from my laptop through the vSphere client.

  Now, I created a VM with Windows 2008 R2 on top of ESXi. I installed vCenter 5.0 in Windows 2008 R2 Machine. I have just to connect to vCenter using vSphere client (which has been installed in my laptop) and added ESXi as host in the inventory.

  Now, I created a VM with Openfiler. Everything is fine. I want to use this Openfiler as a storage array, and I want the SAN with ESXi and Openfiler configuration.

  I think I need to create a VMkernel port group and attach that Openfiler VM who. And if I want to access the Openfiler web interface, do I need to have internet access? We can access the Openfiler Web interface without having access to the internet?

  Can someone let me know how to connect this Openfiler as a storage Bay for ESXi and configure a San.

  Openfiler does not need Internet access and you do not require an additional VMkernel port for access.  If it's production, you share the management and traffic on NIC iSCSI physical separate and thus vmkernel ports.  In this case, it is not necessary.  Did you do the initial installation of Openfiler to create a LUN for the ESXi host access?

• CS3 master collection "maximum number of allowed activations... has been achieved", previously installed on imac of 2006 which has been deleted by the management, so no way to disable, any help?

  CS3 master collection "maximum number of allowed activations... has been achieved", previously installed on imac of 2006 which has been deleted by the management, so no way to disable, any help?

  my user id is 20037502 4400044113 15267602 invoice number contract number

  Serial number and activation support (non - CC)

  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• Satellite P500-12D - a problem with the cooling system has been detected.

  Hi there everyone,

  I bought a Satellite P500-12D, which was a return of retail. When I start it up it runs a few minutes and then it appears on the screen:
  WARNING: A problem with the cooling system has been detected. Please, turn off computer immediately and return it for service.

  Follow the health of toshiba CPU is less than 50% temp and if it goes much higher that the cooling fan turns on and it lowers down and the fan stops again, I noticed that only the fan works r/h to cool the cpu, both should come together? What is a software problem?

  TThe unit is new without even the plastic off the surround screen or webcam. Any help or even point me in the right direction would be much appreciated, gary

  Hello

  Which program gives you this error message about the cooling system?

  Before contacting a service partner, as you can read in the error message, you must clean the cooling system using a jet of compressed air. Maybe dust blocking the fan or something else. Of more to clean up it of not necessary to disassemble.
  Here is an article on this topic: [how to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]

  If it doesn't help, contact the nearest service partner.

• Qosmio G20 error message: problem with the cooling system has been detected

  I'm trying to fix a Qosmio G20 (which is about 3 years old, it is no longer in warranty).

  Error message: Warning: a problem with the cooling system has been detected.

  I managed to remove the outer case and observe the operation of the machine, and basically one of the fans does not at all. The fan which is closest to the power connector seems to work very well (he seems to be turning a lot, do not know if this is normal), but the other fan who does not seem to move at all.

  When I put in place the case and on the machine, I noticed after a few minutes the vent of the fan working heat sink had warm enough, while led the non-working fan remained cool.

  I cleaned the fan from dust and have also changed the BIOS battery mode mode high performance, but the problem still exists.

  I would be grateful if someone could give advice if the problem is the fan or something else.

  If the fan is the problem, where I can buy a: i live in the United Kingdom?

  Hello

  I think there might be something wrong with the cooling module and the replacement would be necessary.
  Usually, this should be done by an authorized provider (ASP) in your country.

  Technicians could replace it with a new part and also could renew the thermal grease which is placed between the module and the CPU cooling.

  So contact the ASP in your country and ask for later handling.

  By the way; also, you can buy the cooling of the ASP module!

  Good luck

• Problem has been detected and windows has been shutdown error STOP: 0x0000008E. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Original title: problem has been detected and windows has been shut down. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Computer Message: Check if you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

  Check with your suppliers of material, updates the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to start advance startup options, and then select Safe mode.

  Technical information: * STOP: 0x0000008E (0xC0000005, 0x8054556C, 0xADB78A98, 0x00000000)

  Beginning physical memory dump

  Total physical memory dump. Contact technical support for further assistance group.

  Hi fernandomventura,

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Follow the steps mentioned in the articles below which deals with a similar question

   

  General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"-restore the system to achieve ".

  http://support.Microsoft.com/kb/945658/

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP psc 750 color, which has been filled, cartridge will not print.

  HP psc 750 color, which has been filled, cartridge will not print.  Using Windows Vista.  Get the message "check color cartridge".  Only change to the system was making filled the color cartridge.

  Performing the procedure online electrical contacts cleaning service twice without a bit of luck.

  Looking for suggestions as to how to solve.

  Hello. Since the hard reset is not; I would try a new cartridge at this point. The hard reset is one of the most powerful tools when it comes to correcting hardware related problems and error messages.

• I installed Windows Live Mail and now am trying to migrate mail from my laptop which has been using Vista and Windows Mail.

  I just bought a new desktop computer using Windows 7.  I installed Windows Live Mail and now am trying to migrate mail from my laptop which has been using Vista and Windows Mail.  I need help please.

  The Vista system export your contacts and send to CSV files, then import them into Windows Live Mail.

  Good luck.

• BlackBerry curve 9300 old meeting calendar which has been removed again try to sync and gives an error message

  Original title: blackberry 9300 curve

  BlackBerry curve 9300 old meeting calendar which has been removed again try to sync and gives an error message

  Hello

  (1) did you remove the meeting in the calendar on the computer as well?

  (2) what is you get the exact error message?

  I suggest you to contact the Support of Blackberry to get better assistance.

  Here is the link: http://us.blackberry.com/support.html?lid=us:bb:support & Cal = us: bb:support

• Satellite T210 - error has been detected by the cooling system

  I hope someone can help out me, I had a my laptop for almost a year, it's a T210 and occasionally it comes up with the following pop upward:

  WARNING: A problem with the cooling system has been detected. Please turn off your computer immediately and return it for service.

  If I click ok it does not go far but its obviously not resolved as long as he keeps breed. Any ideas what the problem is and if it is an easy fix or am I'm going to have to send it back to Toshiba?

  Thank you

  Hello

  Yes I know this error message that some people here in the forum reported the same error message and it seems to be a software bug
  The cooling modules are ok.

  As far as I know the new recovery system would solve this
  However, you should not be afraid that something is wrong with the cooling module system