a catalogue for 2 workstations: want to do editing on both computers

Similar Questions

• Assign 1 NIC purely for VMWare Workstation

  Hi all

  I recently gave me a Z1 HP Workstation PC for my office.

  It is an integrated wireless and wired connections.

  What I would do, is use the wireless purely for VMware workstation 7 and connect it to our test card WLAN to provide connectivity to the outside (for the windows updates, etc.).

  Then use the wired connection, to connect to the domain network.

  Anyone know if this is possible? I can't find much info about him.

  Any help would be appreciated.

  Thank you.

  Good then you have to try to work around the problem.

  The host WiFi network adapter, let all IP6 verified but protocols and then manually set the IP4 address to a 169.254.x.x address while retaining the good mask subnet, default gateway, and DNS for the LAN router.  It comes in a way that is known to work however, it is still dependent on how the wifi adapter and the WiFi router manages normal communications.  If it works, what it does is to allow the virtual machine is to use the VMware bridge Protocol but the 169.254.x.x address stops the host itself to use.  Other normal settings for good subnet mask, default gateway and DNS servers for the LAN router has been know to turn on the bypass, which will take place on a WiFi network card and or WiFi routers.  In some cases, make what you want may have to be done via wired Ethernet, if a WiFi solution cannot be implemented.

  If it does not we know as there may be other things to try with the WiFi before you have to implement a wired Ethernet solution.

• Adobe Creative cloud for 3 workstations

  Hello, I need Adobe Creative Cloud membership, but I have 3 workstations. 1st station, I need to complete all the programs Adobe Creative Cloud, 2nd station only Adobe Acrobat X, 3rd single station Adobe Acrobat X andPhotoshop. This package that I need to buy in this case.

  Hi there - creative cloud A membership allows two computers to be used under a Kidscentive, for use by a single Subscriber (i.e. you cannot use Adobe Acrobat on both computers at the same time). So in your case, you will need to purchase two memberships.

  Although you can buy just a Kidscentive to be used on two computers and then buy Acrobat separately as a stand-alone product. Since you only need Acrobat on the third computer, this might be a more economical option.

  You might want to look into Creative Cloud ready team, which looks like it might be a better solution for you:http://www.adobe.com/products/creativesuite/companies.html

  Overview of the offer: http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/products/creativesuite/compa nies/pdfs/CCTR-offer-overview.pdf

• How can I get Thunderbird to forget the password for smtp (I want to enter manually each time)?

  How can I get Thunderbird to forget the password for smtp (I want to enter manually each time)?

  In the menu Tools | Options | Security | Passwords - saved passwords

  Find and delete the required entry.

  When you are prompted for the password, make sure the checkbox for remembering it is erased.

  No menu? Press ALT.

• How can I disable Chat in v8.0? Or, at least, say that I'm offline for some bimbo wanting to talk to me whenever I start FF?

  How can I disable Messenger Chat in v8.0? Or, at least, say that I'm offline for some bimbo wanting to talk to me whenever I have started with Yahoo mail?

  Sorry, I somehow wrong posted this under the mail filters first.

  Yahoo Messenger is a feature of the new version of Yahoo Mail. Connect to your Yahoo Mail account and go to the Messenger options to turn off it.

• A recovery media for each workstation?

  Hi all

  We have 8 Thinkcenter A57, that we will be upgrading to Windows XP Pro but not Vista Recovery media has been provided.

  I need to create a recovery media for each workstation or I can do only one that will be usable on all Thinkcenter A57 9702?

  Thank you.

  Kind regards

  Sylvain

  You can use the same recovery media, until my computer got the same main components...

• I hate vista it is not good for games I want xp

  I hate vista is nit good for gaming I want low grade him ex I don't have xp this model came with it and I tried live help and they gave me a buch of adds it's bull all I want to do the downgrade to XP cuz it is best for gaming and I don't have the $$$ for 7 so help me low grade it XP ADDS just do

  frustrated by the _____

  Chris

  P.S just do a response of stratum No. ADDS No. ADDS No. ADDS

  ------------------

• "Need for Speed Most Wanted 2012" does not.

  I installed need for speed most wanted 2012 in my pc. When I start the game it says "Not responding" no screen, no error message flash any.  I've updated all my drivers. I tried different compatibility settings. Nothing has worked. Please help me in fixing this problem.

  Here is the configuration of my system:
  Operating system: Windows 7 Ultimate 32 bit
  Processor: AMD Athlon (TM) 64 Processor 3500 + 2.20 GHz
  Memory: DDR2/3 GB
  Display driver: NVIDIA GeForce 8400 GS

  Thanks in advance.
  Kind regards
  Eri.K

  You do not meet the minimum requirements of the system for this game: Minimum of CPU is a dual-core processor, a minimum video card is NVidia GF 8800 GT.

  See: http://www.computerandvideogames.com/353330/new-need-for-speed-requires-20gb-storage-on-pc/.

• Windows 7 connection error "the security on the server database has not a computer account for this workstation trust relationship"

  Could someone help me by giving the solution on this error message:
  "THE SECURITY ON THE SERVER DATABASE DOESN'T HAVE A COMPUTER ACCOUNT FOR THIS WORKSTATION TRUST RELATIONSHIP"

  http://TechNet.Microsoft.com/en-us/library/ee849847 (WS.10) .aspx

• Need for Speed Most Wanted does not work in Win7

  Hello

  Recently, I installed Need for Speed: Most Wanted in my laptop. When I start the game, nothing happens. No flash, no error message display any. I've updated all my drivers through my software manufacturer provided laptop computer. I tried different compatibility settings. Nothing has worked. Please help me in fixing this problem.

  Here is the configuration of my system:

  Operating system: Windows 7 Home Premium 32 Bit
  Processor: Intel Dual Core T4400 2.20 GHz
  Memory: DDR2 4 GB
  Display driver: Mobile Intel (r) 4 Series Express Chipset Family
  The display driver version: 8.15.10.1892

  Thanks in advance.

  Kind regards
  Selvin D

  Hi Laurie Dhavidhu,

  Game Need for Speed is compatible with the windows operating system 7. You can check the Compatibility Center in windows 7.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
   
  Follow the steps below:
  1. open your NFS directory.
  2. right click on speed.exe and select Properties.
  3. go to the Compatibility tab
  4. Select the Compatibility Mode for Windows XP (Service Pack 3) and run resolution 640 x 480
  5. now run your game and have fun!

  Note: to start the game you have Administator Privlages.
  Also perform the clean boot on the computer.
  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
   
  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.
   
  Follow the steps below to put your computer in a clean boot state:
   
  Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
   
  1. sign the computer by using an account with administrator rights.
   
  2. click on the Start button, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
   
  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
   
  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.
   
  Note following this step lets Microsoft services continue to operate. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
   
  5. click OK and then click on restart.
   
  Check the link to learn more about the clean boot below:
  http://support.Microsoft.com/kb/929135
   
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click the Start button, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  2. on the general tab, click the Normal startup option, and then click OK.
  3. When you are prompted to restart the computer, click on restart.

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• Graphics card for xw4200 workstation

  Recently bought a xw4200 workstation. Seller did not graphics card. I can install any PCI express card on? Or should I install only from those listed on the HP website.

  Here is a link to the "reference Guide" for your workstation:

  http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c00215439/c00215439.PDF

  It's the PDF, so it may take a while to open.

  On Page 17, in "System board components" section, point 9. show that there is a PCIE x 16 slot on the computer.

• Hi, I have to Malaysia, I'm trying to load down the lightroom and cc photo shop trial for the test. but after installation I know is English version! for me, I want to use the version Chinese, how can I change the version English version Chinese. Thank y

  Hi, I have to Malaysia, I'm trying to load down the lightroom and cc photo shop trial for the test. but after installation I know is English version! for me, I want to use the version Chinese, how can I change the version English version Chinese. Thank you

  Hi Alexl2684899,

  Please visit the below mentioned link:

  Change the language of Adobe Creative Cloud applications

  Let us know if that helps.

• Hello. I warned to creative cloud, but not what I was looking for. I want to cancel, but I can't find where I can do.  I need help please. Thank you

  Hello. I warned to creative cloud, but not what I was looking for. I want to cancel, but I can't find where I can do. I need help please. Thank you

  Hello

  Please see: -.

  In order to cancel the order, please contact customer service

  You can check: http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  For more information on cancellation: cancel your creative cloud membership

• Hello! For months, I want to cancel my subscription, I'm Italian and I don't know how I can do! Help me please

  Hello! For months, I want to cancel my subscription, I'm Italian and I don't know how I can do! Help me please

  Hello Giulia,

  If it's subscription month. You can cancel this subscription form your adobe account:

  Cancel your membership creative cloud

  Otherwise please contact support:

  Contact the customer service

  Hope this will help you.

  Concerning

  Megha Rawat

• I'm on a free trial for Photoshop, Illustrator and Lightroom CC. How will I know when it expires and how can I register for what I want?

  I'm on a free trial for Photoshop, Illustrator and Lightroom CC. How will I know when it expires and how can I register for what I want?

  HI Margaret,.

  The trial period is 30 days.

  When you launch applications, you will automatically get a prompt with the number of days remaining.

  To subscribe, please visit the link:

  https://creative.Adobe.com/plans

  I hope this helps.

  Concerning

  Megha Rawat