A closing system Module

Similar Questions

• How to make the system module in blackberry jde plugin for eclipse 1.3

  can someone please tell me "how the system module in last jde plug-in for eclipse"?

  Because I don't get any option as in the previous.

  Thank you & best regards

  Nrupay shah

  Each application needs to at least 1 entry point.  You might have the auto application run at startup and does not display an icon.

  Or you can have both with the help of another point of entry.  Could be invoked from an icon, and the other could auto start.

• Cannot delete the system Module

  My application consists of 2 modules. A system with autostart module and a module "classic."  I never had no problems update of the modules with the desktop so far Manager. The module system refuses to update and it is impossible to remove it. I'm stuck with an older version. If I do an uninstall via Desktop Manager, only the non-system module is removed. Try to remove the module from the system via the Options, device, application management does not work. The module is there, but a "Delete" option is not available for this module.

  Try an installation via Desktop Manager it reports as an "update", but the sysm module is not updated

  Version of the platform on my torch is 6.6.0.236.  The software version is 6.0.0.668 and my version of Desktop Manager 6.0 Bundle 2949.

  I'm completely stuck! Can not update the module of the system. It is a new problem. I have this Setup developed for several years and never had a problem like this before. It's extremely frustrating

  JavaLoader is a command line tool, it comes with the JDE plugin or eclipse in eclipse you can find it at plugins\net.rim.ejde\vmTools (where the sigtool is located as well).

  use to remove a cod file could be:
  JavaLoader u f clear codfile.cod

  check -? other solutions, this is a very handy tool to make screenshots, extract log files, load or delete files, etc.

• GlobalEventListener: to distinguish between system module and gui entrypoint

  Hey. I have an application with a system module that should always run and a gui with a EULA entry point. Once accepted the EULA, I want the gui to close application and the module of the system to begin running. (It works on battery pull, but the goal is to avoid asking the user to do).

  eventOccurred in GlobalEventListener fires twice, I guess once for the module of the system and once for the GUI. Two apparently weird things happen. First of all, when I use a global boolean to make a distinction between the sysmod and GUI, GUI screen is stuck and the sysmod seems to be exited. (Or I tried passing the processid of the sysmod and just exit with a different id - the GUI.) Same effect).

  Then when I remove the and check only for the guid of the global event, the eula, the sysmod screen farm stop logging but an icon of the application with the generic blue icon are still there in the app selector (hold the menu button).

  All I want to do is start the system module and close the EULA gui, so that the user need not cold start. Thanks for your time... code below. J.

  class MDB extends UiApplication implements GlobalEventListener 
  
    boolean thisIsSystemModule;
  
      // In main(  )
  
          if (arg0.equals("gui")) {
  
              globalMDB = new MDB();
              globalMDB.SetSystemModuleFlag(false);
              globalMDB.addThatGlobal();
      }
          else if (arg0.equals("activatesysmodandexitgui")) {
  
              MySystemListener msl = new MySystemListener();
              globalMDB = new MDB();
              globalMDB.SetSystemModuleFlag(true);
              globalMDB.addSystemListener(msl);
  
              globalMDB.ScheduleNextBackgroundChange();   
  
                  String logMessage = "MDB has both setup and scheduled a bg change.";
                  EventLogger.logEvent(0x4c9d3452d87922f8L, logMessage.getBytes(), EventLogger.ALWAYS_LOG);
                      System.out.println("\n\n>>" + logMessage);
  
              // post global event for eula to listen to and close
              globalMDB.addThatGlobal(); 
  
          //// Event ID comes from MDB.Start.System.Module.And.Close.EULA.GUI  0x5395aca2ff6df828L
              ApplicationDescriptor appDescriptor = ApplicationDescriptor.currentApplicationDescriptor();
              int smprocessid = ApplicationManager.getApplicationManager().getProcessId(appDescriptor);
  
           ApplicationManager.getApplicationManager().postGlobalEvent(0x5395aca2ff6df828L, smprocessid, 0);
  
              globalMDB.enterEventDispatcher();
      }
      else {
          // code for battery pull
      }
  
      private void SetSystemModuleFlag(boolean flag) {
  
          thisIsSystemModule = flag;
  
      }
  
      private void addThatGlobal() {
  
          addGlobalEventListener(this);   
  
      }
  
      ////  Called when user accepts the eula. EULA is gui entrypoint. I want the gui app to exit and leave just the system module
  
      private static void StartSystemModule() {
  
              int modHandle = CodeModuleManager.getModuleHandle("MDB");
              ApplicationDescriptor[] apDes = CodeModuleManager.getApplicationDescriptors(modHandle);
              ApplicationDescriptor appDescriptor = new ApplicationDescriptor(apDes[1], new String[] {"activatesysmodandexitgui"});  // we want the system module
  
              try
              {
                  ApplicationManager.getApplicationManager().runApplication(appDescriptor);
              }
              catch (Exception e)
              {
                      System.out.println("\n>> Problem starting system mmodule\n");
              }
  
      }
  
  public void eventOccurred( long guid, int data0, int data1, Object object0, Object object1) {
  
          //Is this the GlobalEvent we are waiting for?
          //Long = com.samples.globalEventFiring.GlobalEventFiring
          ApplicationDescriptor appDescriptor = ApplicationDescriptor.currentApplicationDescriptor();
          int thisprocessid = ApplicationManager.getApplicationManager().getProcessId(appDescriptor);
  
          if (guid == 0x5395aca2ff6df828L)  //  !thisIsSystemModule &&         data0 != thisprocessid &&
          {
                  System.out.println("\nEvent received, eula exiting now.");
                  System.exit(1);
          }
  }
  

  Hello. The whole situation turns that arose because despite searching, I was not in the current Modules of the system to start when the application is installed (or opening). I knew only that they were running at startup, then in the absence of a way to start them from code, I asked users to cold start their phones!

  Although I do not understand what caused this error, it might have something to do with the planning of a timer job or adding a listener to an instance of the application system, and then exit the application before the timer is due to run it. Could someone with more understanding fill in us, on what it would do, but unless there is another way, I wouldn't do it.

  The solution was to do nothing. Delete all of the code to start the module of the system. And the other thing of smaller was to detect whether the instance is the module of the system or the gui entry point, Yes, you can use a global var but not a static. In acceptsForeground, you just check this global var defined in the hand and to be sysmod, false return.

  Will seek some of the discovered books recently, in order to aim to post 2 days a week only I think that in the future.

  TKS

  J

• Creating a new system Module

  Hi all

  There is probably a really simple answer to this one, so I apologize in advance for my ignorance!

  If I create a new system module (i.e. to select 'definitions' of the group 'Configuration' under 'Dashboard'.  In the upper left pane of the split window that appears, you will find a green button '+' at the bottom of the list. Click this button to create a new system module). I followed using http://en.community.dell.com/techcenter/performance-monitoring/foglight-administrators/w/admins-wiki/6156.custom-script-agent-2-build-a-wcf-dashboard-to-view-the-custom-agent-data and others, the module does not appear in the list of dashboards in the left menu.

  The user I use got a role of Dashboard Designer.  I have already created a system module this is displayed here:

  

  However, my other doesn't work.  Both have obtained the relevant administrator and authorized roles:

  

  I created the original a bit back and don't think that I made a trick to get it to show up under the dashboard.  Can you get it someone please let me know what I forgot to do?

  Thank you

  Brian

  Modules only appear in the list when they contain a view that is reported as a dashboard.

• Qosmio F10: end strange message program all in closed system

  I use qosmio F-10, when I stopped my machine it refuses leaving message of END of program "Some Applications do not react" or "Win32 encounters an error which should be closed.

  for example, he gives this SMax4PNP is unresponsive, I finished this request by the Task Manager, but he gave another application that is not responding. Finally, I chose to click 'END NOW'. Then it took a long time to shut down the system

  Help, please

  Hello

  A lot of different programs and processes are running in the background. Obviously some of them won t be stopped. Try to detect applications that are a problem. If there are some of them that you need not of all utility configuration system under the Startup tab, you can check. There are all the applications listed that starts at the start of process. Remove the check mark in front of registered application startup item will be disabled.

  Good bye

• Programs closing failing module NTDLL. DLL

  Failed module NTDLL. DLL

  A couple of days started programs closing without error. When I look at the report in the event viewer, I see that the failed module is ntdll.dll that it becomes really annoying because it hampers my ability to do my job. This affects programs such as Chrome, FireFox, Apache, and Spyware Doctor.

  Do you get this problem if you test in safe mode?

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  If the problem is not reproducible in Mode safe, see if you can follow the next article and isolate the cause.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  You could also test the problem when you are connected to another user (that you may need to create test purposes).

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  A check for malicious software could be interesting, too.

  I see a lot of recommendations here for programs such as -

  Malwarebytes' Anti-Malware
  http://www.Malwarebytes.org/MBAM.php

  SuperAntispyware
  http://SUPERAntiSpyware.com/

• Development of system modules

  Hey,.

  I'm new to the world of blackberry development. I have some experience in java but I got rank my skills are intermediate.

  What I'm trying to make in my learning process, is to do a lot of small projects just to test different things and understand how they work.

  The concept, I'm currently trying is a background thread (module system). I use Eclipse and SDK OS6.0 and the blackberry Simulator.

  I have a project that contains a module system only autoruns with the start-up of the unit. I would like to simply output to my debug console module every two seconds that I know its operation. Then I would have after 1 minute, it starts a GUI application.

  My goal in this must really see the main installation and design of this type of program. Think like facebook and gmail that have background threads that are sitting and doing their own thing, can then update the GUI if they would like to (even if the GUI does not work).

  I looked through the forums and tried to look online to find the source code of example of such a project. I find things who talk about setting "tip of spare entry," but not projects sample I could open and look.

  There, could someone point me in the direction or give me a few minutes of your time to make an example of eclipse project?

  Thank you very much

  Stephanie

  Hello

  Peter law, development of Blackberry is always a skill of the stone age. But, do not be discouraged, when do you things, it's very rewarding. It's very cool application you wrote in your hands when you want (it also makes it easier to show .) anyway, to answer your question:

  Create always-on applications:

  http://docs.BlackBerry.com/en/developers/deliverables/23567/Always_on_1380986_11.jsp

  To run these applications, you will need a RIM signature key:

  http://us.BlackBerry.com/developers/javaappdev/codekeys.jsp

  Obtaining samples in Eclipse:

  http://docs.BlackBerry.com/en/developers/deliverables/12002/Import_a_BB_Java_plugin_sample_app_93733...

  In regard to the slow-as-a-snail development cycle, you just have to get used to. I've probably spent days just staring at the start of Blackberry screen

  PS: As stone has said before, you'll end up having to empty your old programs to create new ones, so it's a good idea to keep them in a repository, such as Subversion or Git. Good luck.

• The system modules and threads?

  (1) are grouped within the cod even modules of the system?

  (2) will run the modules of the system since a separate queue UI event thread? Basically, do I need another thread to do the work of the fork?

  (3) I noticed that the phone application is divided into 2 modules: api (1) (2) app.

  Is this a good practice? API modules for interfaces maybe. How do we export Service for consumption by another application?

  Thank you

  G

  In most cases, an operation that takes more than a few milliseconds to complete should be done in a separate thread, especially in a user interface application. Of course, this is not mandatory. The objective is to ensure that the user appreciates their overall experience with their device - not just with your application.

  Edit: Oh, and I almost forgot to answer your original question. To my knowledge, System applications share the CPU as an app we write are supposed to. In this sense, our applications are on the same level as the rims. Of course, I'm sure rim are multithreaded to some extent, but they are not running in a separate environment from our.

• Store persistent with auto-start system module

  I would like to persist a vector of strings through the cycles of power of the device for my application access. I have two questions that relate to this, the first is: what method should I use to commit this vector in the persistent store? (ie. in a GUI application, I could put this code in the method close or exit but where does it go in a module of the system) The NDDN is how retrieve and store persistent data? (it seems that I might be able to achieve this with a BigVector class, but it was only a constructor and not an instance get method so I don't know how she gets the persistent store or how he commits it?) Please help, confused.

  Store is a PersistentObject

  private static PersistentObject store;
  

  Press the button Bravo thank the user who has helped you.

  If your problem has been resolved then please mark the thread as "accepted Solution".

• MacBook 13 "" Cannot repair the disk"then closed system and now cannot unlock drive.

  MacBook was slow so I checked and repaired disk permissions, everything went beautifully.  Then, I ran check disk and got the message "stopped disk utility check Macintosh HD."  Instructions for restart using the R command and choose utility disk, because the required disk to be repaired using the HD of recovery.  I followed this instruction and got the message "Stopped Macintosh HD repair disk utility," followed by "disk utility can't repair the disk.  Save as many files as possible, reformat the drive and restore your backed up files. "After you have clicked 'OK' I was given a guest to the"Restart"I did. The system tried to restart and never exceeded a gray screen before stopping.  On several occasions, he did it, so I tried to boot using the R command and perform a new installation of Mavericks, only to have it tell me that the Macintosh HD disc is locked, and Recovery HD drive is locked.  Also tried a start with the S command, and entering the guest suggested, unsuccessfully, and entering reboot nothing helps.  Now, I'm running out of ideas and seriously need help.

  For more serious issues, I do not have a backup Time Machine recently and he was always, since I backed up on my external hard drive.  I am in serious need of help and would appreciate any guidance.  Thank you!!!

  You need a new drive.

• HP ab125ax: have gambling problems and closing system

  Hi, I bought this laptop about a month ago and since then I have trobles with her, it stops automatically even when watching a TV show or something on this subject but the most important is his worst game performance serusly man I'm still not able to play nfs most wanted edition 2005 on it.it gets hanged in time not completely that I know not what is happening the system gets automatically stop the same thing happens when I play counterstrike source on it (this is also an older version) I don't know what it takes I already posted several times but never get an answer or help you please send someone to fix this thing up.i am really fed up with him if I wanted a performance like this that I wud have bought a lapyop 20 k cheaper that it so please help me.

  Hi @rkbaldola,

  Thank you for the update. That you have completed all the troubleshooting steps, from my previous post, and the problem persists, I would check for hardware failures. You also said that the laptop is hot on the side of the fan when it stops, I'm including HP laptops - reducing heat inside the laptop to prevent overheating step 6 to test hardware failures.  Please keep me updated.

• closed system vista windows blue screen error

  Computer off repetedly

  It looks like overheating

  Info:

  ID: 1033

  The BCC code: 1a

  BCP 1:0003452

  PCO 2: 67D2E000

  PCO 3: C080AE1C

  PCO C 4: 0 182872

  operating system version 6_0_6002

  service pack: 2_0

  product: 256_1

  files that describe the problem:

  c:\windowws\minidump\mini04211.dmp

  c:\users\administratot\appdata\local\temp\WER-46906-0.SysData.XML

  c:\users\administrator\appdata\temp\WERBEEB.tmp.version.txt

  "I'll appritiate any detailed help))

  Many reasons for the blue screen of death.

  Try the following steps:

  Updated drivers

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  -Start in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-safe-mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  -If the problem does not occur in safe mode, try to start mode minimum troubleshooting

  http://support.Microsoft.com/kb/929135

  Memory diagnostic rum test too.

  http://www.memtest.org/

• Monitor goes black, but only if Vista closed system (works fine with Linux!)

  My Vista system works AOK except the monitor displays no more than 2-3 seconds. However, it is on with a fixed green light and if I turn the monitor on and off I have the chance to see my login screen of Vista or office for 2-3 seconds. Then black again.

  BUT, if I first start a live distribution of Linux on a USB key and to allow Linux to shut down the system, I can start then in Vista without difficulty and the screen stays on for the duration of the session. If I reboot with Vista or go out with Vista, I lose again the screen until I use Linux. It's driving me crazy!

  This has happened for about three weeks now. All updates applied. PowerSave off (as it has also causes loss of monitor). Vista just on board: not a dual-boot configuration. I only use Linux live via USB in order to access Vista with a display of work!

  Any suggestions? (NB: I can't use System Restore as it is turned off.) (DOH!)

  Hi TranquilPC,

  There is a possibility that this would happen because of problem with the video card on the computer.

  Check to see if you can boot to the desktop using video in low resolution (640 × 480) Enable"startup option.

  (a) click the Start button, click the arrow next to Shut Down, and then click restart.

  (b) do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  (c) on the screen Advanced Startup Options , use the arrow keys to select tActivate video low resolution (640 × 480)and press ENTER.

  (d) log in your computer with a user account with administrator rights.

  If you can see your desktop, there is problem with your video card on the computer

  I suggest that you manually download and install the updated drivers for the video card by visiting the manufacturer of the card and check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• closed system of blue screen, reads 'dumping of files to the disc' then turned try to reboot in safe mode

  using the net 3 times, my pc has missed a bule screen before starting a backup file. After that, the system will reboot in SafeMode it apears to have no reason for the problem or any other system problems. had no idea. you?

  Hello baby Chelley.

  Thanks for posting in the Microsoft Answers forum! Your question is still there while inSafe Mode? If so, you try to run a SFC scan for troubleshooting the corrupted system files on your PC.

  To perform a scan of the SFC, follow the steps on the following link: How to use the tool File Checker system to troubleshoot missing or corrupted system files on Windows Vista or Windows 7

  Your computer may also be infected and needs to be cleaned in order to work properly. I suggest that you try the steps listed in the related post below with your question:

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/f26f7291-d646-4870-864e-a31976df0011

  You can also try a clean boot troubleshooting method to see if it helps you solve your problem.

  Please let me know if this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think