Monitor goes black, but only if Vista closed system (works fine with Linux!)

Similar Questions

• HP G60 laptop - monitor goes black but power stays on

  When I press the power button, lights up the laptop, I can connect to windows, but then the screen goes black after a few minutes or as soon as possible.

  -The power stays on and does not turn off or restart

  -I can hear the fan spins again

  -I see very very very vaguely the screen that I should be seeing, but no mouse or cursor

  -J' tried to take out the battery

  Anyone know what I can do?

  Thank you, Julie

  If you can see the desktop very weakly, then I guess the backlight is dead/dying

  Edit: view, works does not for any reason any

• Screen goes black after the log on screen and works fine in safe mode.

  Original title: black screen.

  dv65 Pavilion my laptop starts up, but the screen goes black after the log on screen, judging by its instllation it works, but not the screen. It works very well in SafeMode so. Laptop is 3-4 years. I tried to connect it to my TV but she copy behavior laptop screen. Because of this problem, I had to return to the State of the plant 3 times this month. Plese help!

  Hi Avint,

  Glad to know that you were able to resolve the issue and thank you for sharing information.

• The program Pro first monitor goes black very frequently

  I had a few problems with Premiere Pro because I upgraded to El Capitan last year, but the biggest problem has been the program monitor goes black while editing.

  It can happen at any time after the seemingly any task. Once it goes black, the only way to solve this seems to be to quit the application and reopen it. I can always perform any task I want, and you can still hear the audio on playback and washing, but I don't see all the video of the program.

  Sometimes I can perform an action until it goes black again, sometimes it may take a few minutes.

  I had recently replaced logic board and have installed the latest update of Premiere Pro, but the problem is only getting worse. Today, the software was virtually unusable.

  Data sheet:

  Premiere Pro CC 2015, build 10.3.0 (202)

  MacBook Pro (retina, 15 inches, end 2013) (recently had map logical and retina display, replaced by Apple)

  El Capitan 10.11.5 OSX

  Processor 2.6 GHz Intel Core i7

  Memory 16 GB 1600 MHz DDR3

  Graphics Intel Pro Iris 1536 MB

  Seems to be common, but perhaps for different reasons, depending on your configuration. These discussions could help:

  Re: The program monitor will randomly black

  The program monitor keeps going black in first Pro CC

• Why my monitor goes black after a minute?

  I have my standby power setting to turn off the monitor after 15 minutes when it is plugged.  But if I don't move the mouse or press a key for a minute, the screen goes black.  It's very embarrassing, especially if I watch a video.

  Is there another setting somewhere that says monitor going black after a minute of no activity?

  Thank you

  PAM

  Hi Pam,.

  Here's another setting worth it.

  Right-click on an empty area of the desktop and select Personalize.  Click the link to screensaver at the bottom right.  In the next window, adjust the time before the screensaver kicks in the drop "Wait" to a more acceptable value.  Click on apply, then Ok to save the change of the parameter.

  Kind regards

  DP - K

• Windows Media Player play about half of the clip, then the picture cuts off, the screen goes black, but audio continues to play.

  Windows Media Player play about half of the clip, then the picture cuts off, the screen goes black, but audio continues to play.  Just reinstalled MP 11, same problem.

  Hello

  · What is the number and the model of the computer?

  · This occurs when you are working on any specific file format?

  · Were there any changes made on the computer?

  · You play the file in mode full screen?

  Change hardware acceleration

  a. you can try to change the hardware acceleration in the middle and check (you can try another level too.)

  b. right-click on a space empty on the desktop.

  c. go to the resolution of the screen.

  d. click Advanced settings, and then click the "troubleshooting."

  e. set hardware acceleration in the middle. (Here you'll get the only option your video card sound support).

  You can also check: you receive an error message of codec or audio plays video but does not play when you play media files in Windows Media Player 11: http://support.microsoft.com/kb/926373

• After I publish my movie with windows maker movie at 03:00 in the video, the screen goes black, but the music is not yet how to fix this?

  After I publish my movie with windows maker movie at 03:00 in the video, the screen goes black, but the music is not yet how to fix this? all past images 03:00, but the video clips don't.

  Hello

  Did you change your computer?

  I suggest you to follow the links and check out them.

  Solve problems with publishing a movie to your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-your-computer

  Publish a movie in Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Make a movie in four simple steps

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-a-movie-in-four-simple-steps

• I connect my macbook pro to monitor via HDMI, but there is no sound control can do with the macbook, can you help me

  I connect my macbook pro to monitor via HDMI, but there is no sound control can do with the macbook, can anyone help?

  You must use the volume control on the monitor. That's how Apple means yo do and does not provide any method using Mac

• Just upgraded to Vista Home Premium to XP. Got a Packard Bell with RF for the Media Center remote control, worked fine with XP, but is no longer compatible with Vista.

  after update to XP media center units Vista remote control

  Just upgraded to Vista Home Premium to XP.  Got a Packard Bell with RF for the Media Center remote control, worked fine with XP, but is no longer compatible with Vista.  I checked the usb driver for the usb XF-10 rf remote receiver and it is fine, uninstalled and reinstalled it.  Handset was working fine a few days ago.  I also went in 'Administrator', 'services' and then active HID, but it still does not work.  Media works well, but it would be nice to have the operation of the remote control!  Not particularly computer, simply suggestions please!  Thank you, Nick.

  Hi Nicolas,

  I suggest you to check the battery. Additionally, make sure that you have installed the right drivers for you Consumer IR Port.

  For more information, you can check the link below,

  http://www.PackardBell.com/index.html

• How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now?

  How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now with 10.11.3.  I would like to restore the previous version of the operating system without losing any data created in various applications since the 10.11.1.  Fortunately, I had only to use Time Machine is rare over the years, I do not know if you have to return the entire drive to the chosen date or it can somehow just go back to a previous state of OS.  Any suggestions, much appreciated.

  OS X El Capitan: revert to a previous version of OS X

• The laptop monitor goes black after the external vga connection screen

  Hey,.

  I have a Qosmio G50 - 10H, Windows 7 32-bit. After connecting to an external monitor, the internal laptop display becomes almost black. It is possible to see some items on the screen, but it is dark gray to work on. It does not much adjustment of color or brightness (black to very dark grey). The main problem is when disconnecting the external monitor monitor internal still is dark gray and still does not have many adjustments. It's so dark on the adjustments of brigthest that it is impossible to work. I downloaded the latest version of the driver for the support, but still the same problem.

  Any suggestions?

  It is somewhat strange.
  You can switch between LCD and external monitor by using the FN + F5 key combination?
  If you can switch to the LCD only again everything OK?

• Monitor goes black at startup

  Original title: blank screens!

  Dell Optiplex 745.  Monitors go into powersave at startup. Screens are black, but the system is still running.

  Hey, Jay,.

  The monitor started all this?  He worked the day before or if it has been the current behavior?

  Follow the suggestions below to diagnose the potential failure of the motherboard.

  http://www.pcguide.com/TS/x/comp/mbsys/gen_Failure.htm

  Check the motherboard

  http://www.5starsupport.com/FAQ/motherboard.htm#10-1

  Start > right click on my computer

  Select manage

  Select Device Manager

  Click on the + sign next to display adapters

  Right-click on the adapter and select uninstall

  Click on the + sign next to monitors

  Right-click on the monitor and select uninstall

  Close the Device Manager

  Windows will reinstall the drivers on reboot

  Restart the computer

  It works now?

  Check the response from Shinmila:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/monitor-goes-directly-to-sleep-mode-at-boot-up/588cb415-59F3-4885-A316-200493bd71e2

• T410 monitor goes black intermittently

  Running Windows 7.

  I have read similar problems that others have posted, that is the screen turns black during start-up. My machine starts very well, but every few minutes the screen goes black / dies - no backlight.

  It takes a minute or two, then the display will return to normal. Then it goes black again. Then it returns to normal. He does not sleep, HARD drive keeps spinning.

  I checked the graphics driver - no update available. I reinstalled it in any case. Bed help lenovo thinkvantage - utility-is of no help.

  At this point, I wonder about the integrity of the motherboard.

  Help! And thanks in advance.

  Thanks for the quick response.

  After validation, it gradually occurred to me that something that I might be the problem. A few months ago, I cut the end of a cable to the wide and plugged VGA on the laptop, using the screws to make a firm connection. The "stump" of cable extended about 20mm, and that I have attached the ethernet cable and the power cable with a cable tie. (This was done to prevent stress on the connections that I move the machine around the room.)

  It works very well and has worked without a hitch for months.

  As I said, after validation, I started to wonder if the break of the end was the problem - stray strands of son intermittently touching a cable, they should be isolated, in force at random to fill various pins on the VGA output jack.

  To test this situation, I upgraded the insulation of the wires from the end cut off and, of course, no more display problems.

  (Feeling stupid and clever at the same time.)

• my screen goes black, but the computer remains on... just before it turns black it made a thud

  I have windows xp. I got a virus... it has to be cleaned... once I came back... I starts it up... everything is fine... then 2 to 3 minutes more later when I try to connect to internet explore the computer noise is loud and the screen goes black. I have to turn it back on by pressing the set button = re... then it starts again.

  Hello

  This only happens when you attempt to use internet explore?

  Step 1: Check if the problem persists in the clean boot state.
  Reference: http://support.microsoft.com/kb/310353

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.
  Reference: http://support.microsoft.com/kb/308427

  I hope this helps.

• My screen goes black, but is still on. My computer shuts down everything he does and I have to restart so that it become operational.

  I said the video card is corrupted or is overheating.
  The screen goes black randomly. Sometimes 2 minutes playing or until hours later. Sometimes it will not.

  Connect the computer to another monitor. If the problems are gone, replace the original monitor. If the problems persist, then you have hardware problems on your computer. You can troubleshoot the hardware yourself:

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  This includes exchanging the video card for a well-known work.

  On tests of hardware failures often alleged swapping parts by parts checked. If you can not do the test yourself and/or are uncomfortable opening your computer, take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). If possible, have all your data backed up before taking the machine into a shop.
  MS - MVP - Elephant Boy computers - don't panic!