A database on a button Action replaces the values of DML?
Greetings,I would like to know if a database a button Action (update/SQL Insert / SQL SQL Delete) overrides the Insert/Update/Delete valid DML query values? My application button is "GENERATE", and of course, it is not in valid update request values. It is not an SQL UPDATE Action, even if the update does not occur because the form is reloaded without modification.
Best regards
Mathieu
Greetings,
I really don't look at with sufficient attention. The update was going on along, I had just forgotten to reset a flag on my page, which is to screw on the session state. Thus, regardless of the request of a button, if you specify an Action of database on this subject, it replaces the rule valid values for request of DML. It's good to know.
Best regards
Mathieu
Tags: Database
Similar Questions
-
How to enable and disable a button depending on the value of a field
Hello experts,
I enable and disable a button depending on the value of a field.
I did the following:
in a trigger of on_new_form_instrance I put the following
the problem is that it works but does not change when my header_status value is changed.begin go_block('OE_HEADER'); execute_query; IF :oe_header.status = 'BOOKED' THEN SET_ITEM_PROPERTY('CONTROL.ACTION',ENABLED,PROPERTY_FALSE); else SET_ITEM_PROPERTY('CONTROL.ACTION',ENABLED,PROPERTY_TRUE); end if; end;
You have to put the same code in when-validate-item trigger of: oe_header.status...
and I think that this code should be trigger after query
IF: oe_header.status = 'RESERVED' THEN
SET_ITEM_PROPERTY('CONTROL.) ACTION', ENABLED, PROPERTY_FALSE);
on the other
SET_ITEM_PROPERTY('CONTROL.) ACTION', ENABLED, PROPERTY_TRUE);
end if; -
How to replace the value of a column in a table based on the value in the second column?
Hi, I would like to find in a table 2D for values that meet certain criteria (for example, a column< 0.98).="" based="" on="" which="" rows="" meet="" this="" criteria,="" i="" want="" to="" replace="" the="" values="" in="" a="" different="" column="" of="" the="" array="" (change="" to="" 'nan'="" so="" that="" the="" values="" will="" not="" be="" included="" in="" any="" calculations="" on="" that="" column,="" for="" example="" the="" finding="" the="" mean).="" i've="" attached="" a="" sample="" .csv="" file.="" if="" the="" values="" in="" column="" 3="" (index="" 2)="" are="" less="" than="" 0.980="" (or="" some="" other="" user="" defined="" value),="" then="" the="" value="" in="" column="" 2="" (index="" 1)="" should="" be="" replaced="" with="" nan.="" can="" someone="" help="" out="" with="" this="" search="" and="" replace="">
Thank you
Keith
(using LV 2009 SP1)
A few quick hits.
You can merge the two for loops
You have not need one of the constants 1 and 2 in the index table. They will solve automatically when you expand on the index picture, once you have wired to 0 in the column index.
It seems a lot of handling additional table spent unnecessarily.
See below. I did not try to duplicate your code to see how it actually works, but I believe that I have attached will give the same result with less steps.
-
dynamic action sets the value of the element, but not save to DB on submit
I'm working on a page where the value of several to show only the page elements are defined using a dynamic Action. They are set when the user selects a value in a list of selection (and is based on the value of the selection list). Dynamic action is triggered on a list selection change event and then runs the real action "set the value. The selection list displays the names of sales representative. The three fields dynamically filled are the org structure (that is, their chain management).
For the action to set the value, I use a defined Type of SQL statement:
Select VP, DIR, MGR
of SALES_ORG where SSR =: P20_SSR
In the affected elements, I have fixed Type of selection to the 'item (s)"and the value of the Item (s) for 'P20_GVP, P20_DIR, P20_MGR.
Dynamic action works fine for the display of the page (that is, when I select a sales representative in the selection list dynamic action properly updated only display value fields three). This page is a form in which the user submits information relating to the rep. When the page is sent, all fields are filled in a new record of DB with the exception of three that were populated dynamically above. These fields get the values NULL.
When the dynamic action updates the values in the three fields is - it does not set the value of session? Why these fields don't are not taken into account in the submit other ideas > process Page?
I use 5 APEX with Chrome on Mac (Yosemite).
Thanks for the note. I didn't only display the items could not be used in this way. I think I'll take a different approach with the design; given that the org structure is in another table that I can simply refer to that by rep when necessary rather than saving the information uploaded to the page of the form. The reason why I have not fill the screen only the points of loading the page is because I don't know what the values should be until the user selects a sales representative in the selection list.
I'll change the design to one of the following:
1) change the display only items of standard text field. NOTE: if I make the text read-only field that causes other problems when loading (I get the message "violation of protection Session state").
OR
2) do not include org structure in the download folder and just refer to table org Rep when necessary.
Thank you!
Steve
-
How can I replace the value of the column with a particular value in SQL
Hi all
Is someone can you please tell me how can I format my output with the replacement of a column value with a specific value that really depends on the current value of the column
I am executing the following SQL statement
Select state, count (id) from < table_name > where composite_dn = < composite_dn_name > Group by State;
My current performance is:
State Instance number
1 3
3 28
I want to replace the value in the State column as follows
No.OfInstances State
3 filled
28 faulted
I want '1' to be reppaced of 'Done' and '3' is replaced by 'Faulted. '
Is is possible with SQL or PL/SQL, if it is then how I can achieve this required. Help, please!
Thanks in advance!
Published by: Roshni Shankar on October 27, 2012 12:38 AMHi Claude,.
I guess this CASE clause can be simulated by a DECODE and also it is very easy to use.
See - http://www.techonthenet.com/oracle/functions/decode.phpselect decode(t1.state,t2.state_id,t2.state_name), t1.count_id from
t2, (select state,count(id) count_id from where composite_dn= group by state) t1 where t1.state = t2.state_id; HTH
Vanessa B.Published by: Vanessa B on October 27, 2012 14:02
-link addedPublished by: Vanessa B on October 27, 2012 14:19
-added code sample -
Toggle button depends on the value of the selected row
Hello.
My problem is:
I have a Table "singleSelect" and a button Delete.
I´d want to toggle the button depends on the value of the selected row.
I mean:
C1: DepartmentId
C2: Yes/No
For each line: If c2 = "" then disable the rest button activates the button.
I hope you can help me.
I'm from Venezuela my English is not very good. :)Disabled = "#{row." C2 eq 'No'} '.
-
PLSQL do not replace the value of the variable
Here is the small procedure that I write...
m_t_database_links: this table contains the names of database links in the column link_name
PLSQL not replaces the "BOLD" part with the value of the variable. I know I'm missing something. Can someone please?
========================================================================
DECLARE
m_v_var1 varchar2 (10);BEGIN
FOR m_c_link_name IN (SELECT m_t_database_links FROM link_name)
LOOP
Select first_name into the emp @m_c_link_name.link_namem_v_var1;
dbms_output.put_line (m_v_var1);END LOOP;
END;
/I think that you will need to use dynamic SQL here because you can use variables for table names unless it's the dynamic SQL code.
-
How do you replace the values in a control of the ring?
Hello
I have a control of the ring (text values) in Labview 2009 and it is populated by programming with 20 points. The end user selects from the list items or fills with a new item based on a checkbox to add a new item. What I want to do, that's when section 20 is entered and the user selects the check box next to the point 21 to add I want around rap on the first item in the list and crush him. Is this possible and a sample VI would be great demonstrate how this is done. Any help would be greatly appreciated!
Thanks in advance
Charlie
Replace the subset of the table. You need to keep track of the element to replace in a shift register. I would also like to keep the list in a shift register to make your life a little easier.
-
Button, which initializes the values then releases control of more Boolean values
I want to create a button that turns on a series of other buttons, but then releases the control to allow individual switching. The problem is that for my project I need to run the labview file continuously so when I change a control to true switch it keeps the value of the other true Boolean values. For example, I flick a switch to turn on all the lights at the same time but want to and then later have the power of the special lights individually. Then also have the option to turn off all the lights again with a click of a button. I can't understand this. I don't have much so far, sorry for that.
Like this?
-
Sales order form, line status code is displayed as "WITHDRAWN". but the same code appears as "AWAITING_SHIPPING" for the same line in the database.
Where the value in the frontend is filling?
It differs from the flow_status_code in oe_order_lines_all?
Thanks for the correction.
He slipped right out of my mind!
Here is a detailed explanation of this case:
Status of orders picked and picked partial
Kind regards
Bashar
-
How to make a button that controls the value of a dynamic text box
Hey guys
I wanted to do a manufacturer Bill... sort for me. I have some products Let tell and I click on them, and clicking on these buttons, I'd give to see the numbers add up in a text box dynamics and if I could keep track of the value inside the box.
Lets say we have 2 buttons. by clicking on the 1st and the 2nd I want to get 12 in the text box and clicking on the 2nd and 1st I would get 21 in my box.
Is this possible atall with AS2?
Please guide me through
Thank you.
ensure that:
TF. Text =""; TF is your textfield that shows the results of your movieclip button clicks
for (var i: Number = 0; i<>
This ["btn_" + i] .ivar = i; Use the movieclip buttons btn_1, btn_2,.., btn_9
This ["btn_" + i] .onRelease = btnF;
}
function btnF (): Void {}
TF. Text += this.ivar;
}
-
disable a command button based on the values
Hello.
I use jdev 11.1.5
My scenario:
I need to disable a command button if the values of the two attributes does not match
More inf:
I had used a command button called Confirm.
This button should be disabled if the debit and credit attributes did not have the same valuesYou can set the disabled property of the command button to an expression something like #{! bindings.creadit.inputValue eq bindings.debit.inputValue}.
Make sure that you set the autoSubmit property to true text entry fields and ID them as partialTriggers for the commandButton control.
Arun-
-
Dynamic action - defining the value of affected parts
Hello
I'm a little trouble trying to set the value of several items affected in dynamic Action (refresh the number of the part to Page 2). Page 2 I want the user to select the order number and fill in the items combines automatically, for example part number Descr. I can make it work for Part_Number, but the same value appears when I add P2_DESCR to items assigned to set the value. I'm probably doing something really stupid!
http://Apex.Oracle.com/pls/Apex/f?p=11536:2
Kind regards
MickeyHi Mickey,
It is not as easy as it should be, even. You certainly do not make something stupid at all!
Currently the action 'Set value' support only 1 distinct value. You might have other 'Action' within the same dynamic action that returns the other element you want, but it's inefficient, you need to make 2 round trips to the server to retrieve each value. We are looking for the opportunity to put multiple values without needing more trips to go back out of the box in a future release, but for now I think the best approach is to use a custom mix of dynamic measurements, JavaScript and a level of page AJAX callback.
For this example, I use the EMP table, where the user selects the number and the name of the employee and employment are returned, but the technique can be used for your situation.
- Add a page 'AJAX Callback' called 'GET_EMP_INFO', make the type "PL/SQL" with a "Point of process" of "On Demand - run this process when requested by AJAX ' and add the following code:
begin for c in (select ename, job from emp where EMPNO = to_number(:P1_EMPNO)) loop apex_util.set_session_state('P1_ENAME', c.ename); apex_util.set_session_state('P1_JOB', c.job); /* Add more set_session_state calls here if you want to return more item values */ end loop; apex_util.json_from_items('P1_ENAME:P1_JOB'); /* Add more here for returning more values */ end;
- Create a dynamic action "Advanced" (because we need to use the action "Run JavaScript Code"), with the following attributes:
- 'Change' - to the fire of the dynamic action every time the number value used change event.
- Selection of Type 'Article (s)' - to be able to select the element of page employee number.
- Article (s) "P1_EMPNO" - the page employee number element.
- Real Action "to execute JavaScript Code. If you want details on the loading of the page as well, make sure that the 'Fire when loading the Page' checkbox is checked. Add the following "Code":
var get = new htmldb_Get(null, $v('pFlowId'), 'APPLICATION_PROCESS=GET_EMP_INFO', $v('pFlowStepId')); get.add('P1_EMPNO', $v('P1_EMPNO')); gReturn = get.get(); json_SetItems(gReturn) get = null;
So, basically, that's all. I recommend this approach for now, until better support us in native mode to set multiple values, or a plug-in dynamic action arises that does just that!Hope that helps.
Kind regards
Anthony. - Add a page 'AJAX Callback' called 'GET_EMP_INFO', make the type "PL/SQL" with a "Point of process" of "On Demand - run this process when requested by AJAX ' and add the following code:
-
CAL script to replace the value of Member if...
I have data loaded against Member MidPlan and MasterPlan for 2007 (time)
where MidPlan is not null but MasterPlan is nothing I want to write MidPlan in MasterPlan (overwrite the value null with a number)
and when there is the MasterPlan MidPlan AND I want to ADD and overwrite MasterPlan (with a more accurate number).
Can and how can I do this in a calc script?
Thank you
metalrayAs a personal practice I do not destroy data, then I would say you have 3 members (1 being the sum of what you want) rather than use only 2 and the value of one of them by replacing with the sum. This way you can always go back, or even to run the script a second time safely. Data problems are quite difficult to debug on their own, you do not need to continue to create your own questions in re-totaling and crash if a calc is accidentally run a second time.
With regard to execution in a calc script, of course.
Good luck
Robert -
Hello
Just need a quick help. I have 3 tables. I have some data in Array1 table which has 10 columns.
I take the value in the first column of the array Array1 and compare with the values in table 2. For example, in table 1, is it 133.38 between 30,00 and 230.00 (of arry, 2) then put 50.0 (from table 3) in the last column of the table Array1.
It simply means, take each value of Column1 of array1, control the scope of this value, then exit in the last column of table 3 of the value of the index in table 3 corresponding to the lower bound index in table 2.
Example 2. given 400.00 in array1 table Column1, compare its range with the value of array2. We can see that 400 is between 230 and 1000.00 (of array2), so you have to 70.0 in the last culomn of the array Array1.
Thanks for this help.
Use the threshold D 1 table to get the index where your first value will be compared to table 2, rounded down (towards - Infinity) and index in table 3. Relplace the corresponding cell in the table 1.
Maybe you are looking for
-
Where can I get a version of Firefox 31 esr (I need this particular vesion)
I tried to download Firefox ESR 31but although link said ESR 31 labels it downloads ESR 38 is there a way to search with the Mozilla web site for older versions? Thank you in advance.
-
FoxTab 1.4.4 stopped working.all I get is toblue window where the ith my topsites grid use to be.i tried to remove the extension and then re - install but I have the same condition. Someone at - it ideas. Oh yes, there was a windows update this morni
-
Adding new folders inside Mozilla and questions
I would like to add new bookmark. When I want to add new bookmark, I did the following:1. the bookmarks2. Mark this page3. choose the folder...4. Add the new folder, click new folder button This works perfectly.
-
RT for Windows and Cisco VPN (AnyConnect) Solutions?
Microsoft and Cisco are working together to ensure Cisco VPN is soon available for Windows RT? I read a thread RT of Windows from Microsoft and Cisco VPN without seeing all the comments of Microsoft or Cisco. Please notify.
-
Bug with truncatewords and truncate in blogs...
I have noticed a problem with the help of truncatewords or truncate in blogs. (It can happen elsewhere, just have not seen).To replicate the issue, let me share a bit of code.First of all, in the overall design, I have code that looks like this:< div