Button, which initializes the values then releases control of more Boolean values

Similar Questions

• How to enable and disable a button depending on the value of a field

  Hello experts,
  
  I enable and disable a button depending on the value of a field.
  
  I did the following:
  
  in a trigger of on_new_form_instrance I put the following

  begin
       
  go_block('OE_HEADER');
  execute_query;
  IF :oe_header.status = 'BOOKED' THEN        
        SET_ITEM_PROPERTY('CONTROL.ACTION',ENABLED,PROPERTY_FALSE);
  else
       SET_ITEM_PROPERTY('CONTROL.ACTION',ENABLED,PROPERTY_TRUE);
  end if;
  
  
  end;

  the problem is that it works but does not change when my header_status value is changed.

  You have to put the same code in when-validate-item trigger of: oe_header.status...

  and I think that this code should be trigger after query

  IF: oe_header.status = 'RESERVED' THEN
  SET_ITEM_PROPERTY('CONTROL.) ACTION', ENABLED, PROPERTY_FALSE);
  on the other
  SET_ITEM_PROPERTY('CONTROL.) ACTION', ENABLED, PROPERTY_TRUE);
  end if;

• Toggle button depends on the value of the selected row

  Hello.
  
  My problem is:
  
  I have a Table "singleSelect" and a button Delete.
  
  I´d want to toggle the button depends on the value of the selected row.
  
  I mean:
  
  C1: DepartmentId
  C2: Yes/No
  
  For each line: If c2 = "" then disable the rest button activates the button.
  
  I hope you can help me.
  
  I'm from Venezuela my English is not very good. :)

  Disabled = "#{row." C2 eq 'No'} '.

• Somehow ive typed a button which cut the bottom half off screen

  Somehow ive typed a button which cut the bottom half off screen

  Hello

  1. What is the operating system installed on your computer?

  Please provide us with the screenshot of the issue in order to better help you.

  Click on the link below.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/how-do-i-post-a-screen-shot-on-this-forum/c86de820-C620-401c-A804-9f6337cd3053

  Try to restore the system to the date and time when the screen was working fine.

  Use the links below.

  For Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  For Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  For Windows XP

  http://support.Microsoft.com/kb/306084

• Initialize the array, then using a feedback node to replace items

  Hello friends,

  I have a typical problem. I need to store values in a table 1 d with 7 elements. I want to start with a set zero array of items. I then start sending values and indices one by one so that the value is inserted in the table and is stored. My problem is when I start with a zero table, what happens is every time I have send a value that it replaces a zero to the correct index, but does not store this value for the next iteration as the zero table defines the table to zero once again. Changes as well as an item in the table all the time. I won't like that. Once started, I want all my values stored in the corresponding index, unless until a value with the same index overrides. Here is my attempt in jpg format. I tried to insert a table of zero which takes place once in a while loop and then connect the spare in feedback mode Board so that the insertion of elements Dummies happens only once. But I am not able to do. Please help me view inthi

  

  Your image shows that you cannot have a 'next iteration"because there is no point in loop around the code of the replacement array element and the while loop around the table to initialize is useless. You are not clicking on the button "Continuous run" are you? Do not!

  Here's a basic example. You can learn a few basics of LabVIEW by taking some of the tutorials.

  

• How to create a button loop until the mouse is released?

  How I would go about creating a loop of button continuously while the button is pressed and stops incrementing release increments?

  Here's a course using the setInterval function (allows you to control the speed of the increment):

  var interval;
  var number = 0;

  btn.onPress = function() {}
  range = setInterval (increment, 500);
  }

  function increment() {}
  Count ++;
  trace (Count);
  }

  btn.onRelease = function() {}
  clearInterval (interval);
  }

• disable a command button based on the values

  Hello.
  
  I use jdev 11.1.5
  
  My scenario:
  
  I need to disable a command button if the values of the two attributes does not match
  
  More inf:
  
  I had used a command button called Confirm.
  
  This button should be disabled if the debit and credit attributes did not have the same values

  You can set the disabled property of the command button to an expression something like #{! bindings.creadit.inputValue eq bindings.debit.inputValue}.

  Make sure that you set the autoSubmit property to true text entry fields and ID them as partialTriggers for the commandButton control.

  Arun-

• Form elements do not initialize the values READ

  Hello
  I have a form1 which is an interactive report with an additional button called CREATE. When the user clicks CREATE, form2 is known which is the shape of the Insert.
  In form1, I also called form2 to icon row so that the user can select and update records.
  If I click on the icon for line level, I can change the record, but after modification, if I click on the button CREATE to call form2 I get the values in all the articles on the forms.
  All I want is, if I click on create, I should be able to insert a new record and
  If I click the line icon form interactive report output, I'll be able to update the records. Guess to clear me values pages somewhere on form2... can I someone please
  
  Thank you
  Aali

  Aali,

  Open the button create countries on page 19. Scroll down to the optional region redirect URLS and add the digit '8' to the attribute to clear the Cache. Let me know if that solves the problem.

  Kind regards
  Dan

  http://danielmcghan.us
  http://sourceforge.NET/projects/tapigen

  You can reward this answer by marking as being useful or correct ;-)

• I am (early 2013) iMac 21.5 inch 8 GB which is sutting down then restart unexpectedly often more than once a day. I ran the diagnostics of material, check the permissions and disk. All are no problem. Any suggestions?

  I have an iMac (early 2013 21.5 inch 8 GB) which stops and then restarts unexpectedly often more than once a day. I ran the diagnostics of material, check the permissions and disk. All are no problem. Any suggestions? I bought this machine this June last at B & H in New York.

  Please post a report of EtreCheckof your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• A database on a button Action replaces the values of DML?

  Greetings,
  
  I would like to know if a database a button Action (update/SQL Insert / SQL SQL Delete) overrides the Insert/Update/Delete valid DML query values? My application button is "GENERATE", and of course, it is not in valid update request values. It is not an SQL UPDATE Action, even if the update does not occur because the form is reloaded without modification.
  
  Best regards
  Mathieu

  Greetings,

  I really don't look at with sufficient attention. The update was going on along, I had just forgotten to reset a flag on my page, which is to screw on the session state. Thus, regardless of the request of a button, if you specify an Action of database on this subject, it replaces the rule valid values for request of DML. It's good to know.

  Best regards
  Mathieu

• Button to reset the values of form works, but I can't label.

  I added a button to reset my form fields empty when the button is clicked and it works great however, I can't put a label on the button that says "reset".  Anyone know how I can tag my button to reset?

  Field properties - Options - Label.

• Logic problem.  JavaScript will not correctly add the values

  Simple logic problem.  I have radio buttons fixed to values 1 or 0, but the simple addition of characteristic adobe has used it add up?

  Basic story, I need to display the value of how no. GOs there, then multiply the amount of GOs No. against a locker's worth.

  While subtract 100 to get an academic score.

  Code to determine the value of a set of radio buttons;

  Switch (this.getField("Group_1").value)

  {

  case 'GO ':

  Event.Value = 0;

  break;

  case "NO GO":

  Event.Value = 1;

  break;

  }

  On the calculation tab, I then use the first calculate (sum +) selection to determine all areas, I would like to add (total of 24 possible selections) field name is (TOTALNG)

  After that I have a hidden field that multiplies the previous value TOTALNG * 4 (which represents the value of the note I want to determine each no. GO), then displays

  the total final that I simply subtract 100.

  It is, he does not appear correctly the initial value of the no-go. It is always 1 account back up to what it should be. I even select the radio to go button which resets the value to 0, but down altogether, it counts as if it is chosen and gives a value of 4.

  A way simple code so far, even seems (if the way im put it on foot does not tell you that I know little) but I do not understand what I can be missing. I even put a field of 0 to add in now just to see if she needs another value to add against just in case where there is that one number GOING to add.

  Any idea? My form is a probably a mess, but I think the code is simply stated if anyone is willing to look and laugh for a second to my work.

  Thank you

  The problem seems to be the order of computation of field, only not with the

  code. You can configure via a Set - other tasks - field form editing mode

  Calculation order.

• In the example LabVIEW Full featured, which makes the entry point button reappear?

  My question is this: what piece of LV code or invoke the node for the TS engine makes the entry Point button reappear when loading a file of sequence?

  Background:

  I inherited a modified version of Full Featured LabVIEW UI, which has been moderately modified (enough so this restart is not really an option, but it is still quite similar to use as comparisons for behaviors).  In addition, this code was started in LV2012/TS2012 and I'm migrating to LV2013/TS2013, but this behavior is consistent in both versions.

  Here is what I tried:
  I have found that when the command connect runs (see attachment), the button which is a TSUI. IButton control, SEAO is grayed out or hidden.  In the unmodified example user interface provided with TestStand, button is again displayed when loading a file of sequence.  The problem is that when I load a movie file in my code and click it before the race, the button does not reappear. In my code, I can run the sequence successfully by right click on the movie file and selecting run, so I don't think the sequence has an error, or the process model.

  Thanks in advance,

  Seth

  Seth,

  The entry 'options' of the ConnectCommand function controls this. On help page for this entry, you can see that there are options for "ignore enable" and "ignore visible." Or any of them may affect the functionality of the key entry point. You could try to make the options for both keys 0 and see if that fixes the problem. If this isn't the case, please let us know.

• Disable the button by using the node property

  I used a button which has the button is pressed again and again, I want this button to get disabled when needed up to 6. I used a business structure that compares the value when it is greater than 6, it gets the true value and the structure of the case must turn off the button, but I run the code the button is already disabled.

  Can someone please guide me where I made mistake.

  Kind regards

  Ather

  In the case of range? and downstairs is the two True in any given iteration of the loop, you will write to the serial port twice with only about one millisecond between the Scriptures. Is that what you want? The remote device can handle two sequential writes?

  The code in the two structures case is identical. It is usually better to make a Subvi of duplicated code. Then if ever it needs to be changed, simply change it one place.  If you use the decimal string number, simply two cases on the internal structure of the case.

  It is not necessary to have two close functions of VISA for the same session. In fact one of them always generates the 1073676418 warning: the specified object reference is not initialized.

  This is a cleaned version a little with most of above changes implemented.

  Lynn

• Return from drafts of af: inputListOfValues the values of registers

  I use Jdev 12 c.

  I have an inputListOfValues set to a column in af:table. I click on the magnifying glass and the dialog box opens. I have search in the dialog box and click a value in the list. I click OK to return the value of the column. Returns OK but the rest of the columns I've entered data in get cleared out.

  A few things on the page:

  1. There is a button which provides the undo changes. It has #{bindings. Rollback.Execute} as actionListener. When you press after deletion of a line, it clears each grid and the field data in the page and gives an error message related to the transaction.

  2. the inputListOfValues dialog box is slow when searching. The source of the list has 75K lines. She returns to the slow table as well. Sometimes a minute when seems should be a second.

  3 Tester app Module freezes when you browse the VO this service page.

  All the world run in this type of behavior when you work with inputListOfValues?

  Kind regards

  Dave

  first of all, do UI that ins o table controls be autoSubmit

  Secondly, regarding slow LOV to the ViewObject LOV, use technique described here:

  http://adfbugs.blogspot.RS/2010/02/limit-query-results-based-on-custom.html