A field based on another field of time stamp setting
I have 3 fields in the custom object 1 labeled (a list of choices) status of the Transaction, on Hold time and off hold time. The drop-down list contains the value "pending." When this value is selected, I can successfully timestamp field on time to keep using a workflow rule (PRE ("< plTransaction_Status_ITAG > '") <>[< plTransaction_Status_ITAG >]) AND [< plTransaction_Status_ITAG >] = ValRech ("OCC_CUST_ZOBJ_1_LOV_12", "Pending").When the Transaction status is changed to something other than 'pending' after having been in this situation, I need to stamp the "Off Hold Date/time field", but only after the "On Hold Date/Time" field contains a value that is earlier than the current date and time. I tried to use a workflow rule, but this doesn't seem to work properly and timestamps each time that the value of 'The Transaction status' is changed.
In my view, a default value in the field ' Hold Off Date/Time ' should work, but have no idea on how to do it.
Can anyone provide any assistance would be appreciated.
Thank you
Neil
Published by: user1815782 on July 15, 2009 09:39
Neil,
Have you tried
PRE ("
see you soon
Alex
Tags: Oracle
Similar Questions
-
Choose field from the joined table based on another field?
Hello!
Is it possible to select a field in a row of attached table based on another field? Consider the following data in the CVALUES table:
And the following data in the table MDETAIL:ID C1 C2 C3 C4 C5 C6 T1 9.6 10.3 12.4 19.6 19.6 0 T7 9.6 10.4 0 0 0 0 T3 8.2 9.9 11.4 19.6 19.6 0 T8 8.3 10.7 13.5 20.7 0 0 T5 9.4 10.3 12.7 22.9 19.6 0 ...
I want to get the column corresponding to the VALUE field in the table MDETAIL CVALUES. I'm doing this:ID MDATE CNUM ... T1 03/28/2012 18:00:00 4 T1 03/28/2012 18:00:00 1 T8 03/29/2012 06:00:00 6 T8 03/29/2012 06:00:00 5 ...
The CVALUES table records are unique; only one line by ID.SELECT m.t1, m.mdate, CASE WHEN m.cnum = 1 THEN c.c1 WHEN m.cnum = 2 THEN c.c2 WHEN m.cnum = 3 THEN c.c3 WHEN m.cnum = 4 THEN c.c4 WHEN m.cnum = 5 THEN c.c5 WHEN m.cnum = 6 THEN c.c6 END AS cvalue FROM mdetail m JOIN cvalues c ON m.id = c.id
This method works and it's fast, but it's messy code and I think there must be a better way to do it. I use cvalue value in several calculations so each calculation that I use is this giant glob of CASES inside!Hello
With a decoding it would be easier, but as ugly :-)
SELECT m.t1, m.mdate, DECODE( m.cnum , 1 , c.c1, 2, c.c2, 3, c.c3, 4, c.c4, 5, c,c5, 6, c,c6) cvalue FROM mdetail m, cvalues c WHERE m.id = c.id
Success!
FJFranken
-
Make a mandatory DFF field based on another field
Hi all
We have a requirement where we need to do a mandatory DFF field based on another field.
example:
FDF has two fields:
Depose1: the values 'Email', 'Fax '.
Depose2
If "Email" is selected in 'Field1' Field2 should become mandatory.
All entries on this will be really useful.
Thank you and best regards,
Satya.Please see old topics that cover the same subject - http://forums.oracle.com/forums/search.jspa?threadID=&q=DFF+AND+mandatory+ANd+Dependant&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thank you
Hussein -
Can I use a variable in step of TS Message for field 'waiting time '?
Is it possible to use a variable (inhabitants, parameters, etc.) for the field "Wait time" in the stage of message TestStand?
TestStand 4.1
Thank you
Rafi
Go to the step settings > properties > Expressions > Expression Pre and enter something like:
Step.TimeToWait = Locals.MyTimeToWait
-
How to generate a field real-time tiara?
Hello
I tried a lot of things, but it is not working properly.
I logfiles with the data of one ore more test ports. All entries in log file has a time stamp. Timestamps are not equidistant. I can read the log file and get a table 1 d (n long elements) of the timestamps and a table 2D data (n x m elements m test ports).
How to generate a report in the tiara with the time that x-axis it? The difficult is, I can't transfer the timescale to tiara.
I could first convert timestamps double and double transfer al. This does not solve my problem. The tiara-channel resulting if of type 'float' and not 'time '. I need a script to swich the channel to 'time'. I see no solution to load a layout of report (TDR), to call a script to transfer data from additional text.
Hello bohm,.
When you write a channel timestamp in a PDM file, tiara automatically identifies it as a weather channel. So when you export the right data, you will get good results ;-).
To illustrate this, I wrote an example VI: it creates two TDMS files with random timestamps and displays then the two files into a single report of DIAdem. I hope that you find it useful.
Best regards
SFK -
Get the cumulative values in a single column based on another column in reports
Hi all
I have a requirement to get cumulative values based on another column.I 'Sales rep name' in the first column.
Since there is no rank option in the PivotTable, I do this in the report table.
Correspondent "Values of the invoice line" in the second column.
Want to have cumulative of all the values for each sales invoice line.
Then apply rank and display the top 10 sales reps based on invoice lines.
Looking for the best entries...
Thanks in advance...Try below
2nd column: "name of Sales rep.
column 2: SUM ("invoice line values ' BY 'Name of Sales rep'") and sort this field desc.
3rd column: fx RANK (SUM ("invoice line values" BY "Sales rep name")), to hide this column, so that you don't confuse your users.and put the filter on the 3rd column below 5
I hope this works for you
-
Display list items based on another element of the list
Hi all
I want to display the list item based on another element of the list, but his does not work.
This is my code:
/ * WHEN-NEW-FORM-INSTANCE * /-his work.
DECLARErg_district recordgroup;
rg_name VARCHAR2 (40): = "district";
vtemp NUMBER;
BEGIN
rg_district: = FIND_GROUP (rg_name);
IF ID_NULL (rg_district)
THEN
rg_district: =.
CREATE_GROUP_FROM_QUERY (rg_name,
'select dist, dist district_mas.
);
vtemp: = POPULATE_GROUP (rg_district);
POPULATE_LIST ('BLOCK3.) Of RIDING ", rg_name);
END IF;
END;
* / CHANGED AFTER a - list * /-does not work. Cannot complete the list based on the list
DECLARE
rg_branch recordgroup;
rg_name1 VARCHAR2 (1000): = "branch";
vtemp NUMBER;
BEGIN
rg_branch: = FIND_GROUP (rg_name1);
IF this is ID_NULL (rg_branch)
THEN
DELETE_GROUP (rg_name1);
rg_branch: =.
CREATE_GROUP_FROM_QUERY
("rg_branch",
"SELECT FROM dist_branch WHERE district IN branch (DIST DISTRICT_MAS WHERE DISTRICT = SELECT').
|| : BLOCK3. DISTRICT OF
);
vtemp: = POPULATE_GROUP (rg_branch);
POPULATE_LIST ('BLOCK3.) Branch of THE ', rg_branch);
END IF;
END;
Table:
CREATE TABLE DISTRICT_MAS
(
DIST VARCHAR2 (100 CHAR)
);
CREATE TABLE DIST_BRANCH
(
NEIGHBORHOOD VARCHAR2 (100 CHAR),
DIRECTORATE GENERAL OF THE VARCHAR2 (100 CHAR)
);
Values:
insert into district_mas values ('chennai');
insert into district_mas values ('coimbatore');
insert into dist_branch values ('chennai', 'chennai_north');insert into dist_branch values ('coimbatore', 'Podanur');
Concerning
Nassik M
I tested the code below when the list has changed
DECLARE
rg_branch recordgroup;
rg_name1 VARCHAR2 (1000): = "branch";
vtemp NUMBER;
QT VARCHAR2 (10): = "';
BEGIN
rg_branch: = FIND_GROUP (rg_name1);
IF this is ID_NULL (rg_branch)
THEN
DELETE_GROUP (rg_name1);
END IF;
rg_branch: =.
CREATE_GROUP_FROM_QUERY
(rg_name1,
'SELECT branch, branch OF THE DISTRICT WHERE the dist_branch =' | QT | : BLOCK3. DISTRICT OF | QT);
vtemp: = POPULATE_GROUP (rg_branch);
POPULATE_LIST ('BLOCK3.) Branch of THE ', rg_branch);
END;
Hope it's work...
Hamid
-
How do column filter based on another column
In my report, I have column a thru d. I would like to create a filter based on another column where column is column B. I can enter a value that the column cannot be equal to, but I would use a column instead of a value.
Thank you.
JonathanTry this: icon on the filter columns->-> convert this advanced filter for SQL
You can reference any other columnBTW: Have you had a chance to look at my suggestion for your post
Tables from a Table -
Delete based on another column dublicate records
How can I remove duplicate records, based on another column.
the table structure
CREATE TABLE IA_EXPORT_LEVEL
(
A_NO VARCHAR2 (22 BYTE),
IM VARCHAR2 (18 BYTE),
ctn_level NUMBER (2)
)
reviews
A_NO IM ctn_level
S1 S1 1
S1 M1 2
S1 h1 3
H2 S2 1
S2 h2 2
S3 h1 2
S3 h1 3
S4 h6 4
S4 h6 5
I want to delete all records other than the minimum value of the ctn_level
output should like below
S1 S1 1
H2 S2 1
S3 h1 2
S4 h6 4
Published by: OraFighter on December 16, 2011 13:44DELETE FROM IA_EXPORT_LEVEL where rowid IN (select rid from (select rowid rid, row_number() over (partition by A_NO,IM order by ctn_level) rn from IA_EXPORT_LEVEL ) where rn > 1 ) /
Hope your question.
-
BC4J editable attribute based on another attribute
Hello.
Is it possible to define updatable (read-only) on BC4J, based on another column. For example if attribute a == true which attribute the (Always) b.setUpdatable of other b.setUpdatable (Never). By definition, changing Updatable property to EO/VO for each line is an absurdity. Or not?
I know how to do it on ViewController (set ReadOnly property expression EL provided you attribute a different value) but don't know how to do (if it is possible) on model?
THX
Concerning
Zmedazmeda,
You can override isAttributeUpdatable() on your EntityImpl or ViewRowImpl classes
John
-
loop chart - the chart is based on another query
I'm working on a report of BI Publisher. The report displays information for a list of stores (store group, by store - each store page break is a page). Now, we want to add a chart (weekly sales - group per week) for each store, we know there is "table within the group" box, we can use, but our problem is that the chart is based on another query, not the original group by query parent store. Could you please help? Detailed information can be provided if required.Please check your Inbox.
I sent you the answer.See you soon
Jorge
p.s if this answers your question please give the points and close the message -
Update of the table based on another
Hello
I'm trying to update a date column in a table based on another table. There is a unique ID in each table that identifies and connects each person:
This is the error:update patient_bu a set a.entry_date = (select b.entry_date from CLIENT_MED_DT b where a.id = b.id)
ORA-01427: einreihig subquery returns multiple rows
The problem (I think) is that the select statement back several dates for records people. There are some people / records that have multiple entry dates, but I'm only interested in the most recent date.
How can I update this table with only the most recent date?
Thanks for any help,
MattOh well, I forgot the UPDATE clause:
SQL> create table patient_bu 2 (id number 3 ,entry_date date); Table created. SQL> create table client_met_dt 2 (id number 3 ,entry_date date); Table created. SQL> merge into patient_bu a 2 using (select id 3 ,max(entry_date) max_date 4 from client_met_dt 5 group by id 6 ) b 7 on (a.id = b.id) 8 when matched then update 9 set a.entry_date = b.max_date; 0 rows merged.
-
How to get the print page numbers in a report based on another report
Hello
I have a requirement in which I need to print the page based on another report number
example my game application has 3 reports
1 report prints the pages 1-100
Report page no. 2 should start from 101 to 110
3 report 111-
Can someone make me please how to do this?
THX in advance
KumarHello
You can create all report queries three in a single report, create a separate query in the data model and then create the layout in the proper sequence as required.
If you want to use separate reports only you can try the following:
In the first report, use the shutter release after report and record the total number of pages of a table as a record.
In the second report, extract the value stored in the table and add it to the Page No. to get the Page number for the second report.
Also in the second report use the shutter release after report and update the record created first in the total number of pages + total number of pages of the first report.In the third report to extract the value stored in the table and add it to the Page No. to get the Page number for the third report.
Don't forget to delete the folder created in the trigger after the third report table report.I hope this helps.
Best regards
Arif Khadas
-
Default value for the prompt based on another request
Hello:
I have a requirement where I need to define default values of messages based on another request.
The guest is a quick Date.
I have tried using the presentation variable and sql query writing, where is written "WHERE promo_id = @{variable}" "
but it still does not.
Please let me know a workaround for this problem.
Thank you.
-VinayWhat determined your operator BETWEEN End Date? I guess it's variable. In addition, is the second report on the same page or another page of dashboard? Assuming that the two reports are on the same page, do the below. If this isn't the case, you can use the same guests on the second page of dashboard. Define the scope of "dashboard" and the selection of the user is wearing on the second page.
The easiest way is to have 3 guests of dashboard: Promo_ID, Start_Dt and end_date. assign to these guests PVs: pvPromoID, pvStartDate and pvEndDate, respectively.
Filter a report on pvPromoID and pvStartDate.
The second report on the pvPromoID of the filter and use pvStartDate in the filter of the two report Date column. Assuming that the values BETWEEN are variable, so you can write the following on the column of your second report:
"Table name". " Date ColumnName.<= '@{pvstartdate}'="" and="" table="" name"."date="" column="" name"="">=><>
And your Promo column, use the filter "Table name". "Class = ' @{pvPromoID}"
When the user selects the Promo ID, Start Date and end Date in the guests, the first and second reports will be filtered accordingly.
-
best way to create a table based on another table
Hello
I am trying to create a table based on another table with all the data in it. It contains important data.
create table < tablename > select * from table1.
Is the best way to do it, or is there another way. Please advice.
Thank youInsert / * + append * / in
as select * from ; It should be->
insert /*+ append */ into
select * from ; Kind regards.
LOULOU.
Maybe you are looking for
-
How to program hotmail because outlook express 6?
Im trying to do a newsletter for a waterproofing company and I want to do it on outlook because its where I fell more comfortable... someone help please thx
-
Vista update may not download due regulationn.
It is a complement to "Vista update fails KB2808679" I watched windowsupdate.log - it is filled with "Update unable to download due to regulations." KB2808679 is the only problem. I thought that Microsoft has helped with update problems; so far, my
-
Windows Live Mail and pdf attachments don't open
Windows 7 and Live Mail are not open pdf attachments. Technical support from Microsoft and Adobe will not help me so far.I was really sucked by the TV commercials for upgrade to Windows 7. How f... ING mess!
-
I HAVE WINDOWS 7 ON MY DESKTOP COMPUTER. I'M DELETING AFTER BURNING OF AUDIO CDS TO PLAY ON MY CARS. OLD CD WELL MADE. I WAS TOLD THAT IF I CHANGE THE SPEED AND THE LENGTH OF 72 MINUTES AND 650 MB. IT WORKS BETTER. WHAT ARE THE STEPS TO DO THIS H
-
Duration of lock FireSIGHT/SourceFire user configuration?
Hi all I've been searching in the documentation for 5.3 and 5.4, and I don't find no information for what the account lockout duration is for when a user does not have the number of logins set to the value of maximum number of connections has failed