A file exist

Similar Questions

• You cannot request to applescript "If file exists" "else".

  Hello everyone!

  I've been Googling for hours for this. Could not find anything.

  I thought it would have been quite simple: get applescript to do a check to see if a file exists, and do something. If it does not exist, do something else.

  My script is as follows (more or less):

  game file_yes (("~ /") & 'File.txt')

  say application 'Finder '.

  if there are file file_yes then

  the shell script "SHELL SCRIPT" with administrator privileges

  say application "Finder" for display alert "Shell Script complete!"

  Try

  the shell script "rm ~ / FILE.txt" with administrator privileges

  end try

  on the other

  say application "Finder" display message "No file!"

  end if

  end say

  You must use a Mac OS X-style path when it comes to the Finder:

  If there is the file "File.txt" of the House then

  (137423)

• How can I check if a file exists in the CVI real-time?

  Also, it would be nice if designated so help file functions have been supported in real time or now.

  I tried this:

  If (GetFileAttrs (DataFileName, NULL, NULL, NULL, NULL) == - 1).

  You can check if a file exists in the CVI real-time using GetFileInfo.

  CVI provides a list of the available functions in the CVI real-time here: CVI real-time functions

• try to install Picture IT Publishing Platinum & get error 1305 D:\PIP\PIP2002\openscn6.its...verify file exists and you can access it... help

  It wont let me install Picture It! Publushing Platinum... error message 1305:
  Error reading file D:\PIP\PIP2002\openscn6.its... check the file exists and you can open it... help... what I do

  Hello
  1 did you change on your computer before this problem?
  2. in the place where you are trying to install?
  3. is this a problem install only Platinum edition or with all applications?

  You can follow the steps in the article and see if it helps.
  Problems installing and uninstalling programs on Windows computers
  http://support.Microsoft.com/kb/2438651

• I get "file exists" when you try to open a session to Quickbooks pays.

  Original title: Windows error message

  When you try to log in to Quickbooks don't pay I get an error message

  "the file exists." The error message is still displayed. I have to go into the Task Manager to stop the program.

  Hello

  You can follow the article below in order to solve the problem.

  http://support.QuickBooks.Intuit.com/support/pages/knowledgebasearticle/1011639

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• on my office shows... Could not load or run ' C:/Docume/user/locals/temp/csrss.exe specified in the registry. Make sure that the file exists on your computer or remove the reference to it in the registry.

  on my office shows... Could not load or run ' C:/Docume/user/locals/temp/csrss.exe specified in the registry. Make sure that the file exists on your computer or remove the reference to it in the registry.

  Hello

  · Were there any changes made on the computer before the show?

  I suggest you to run the audit files system analyses on the computer. You can check the link for the procedure: how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7: http://support.microsoft.com/kb/929833

  Adding to it, I suggest to run online virus scan and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• Could not load or run 'pythizer.exe' specified in the registry. Make sure that the file exists on your computer or remove the reference to it in the registry.

  I get this error "could not load or run 'pythizer.exe' specified in the registry." Make sure that the file exists on your computer or remove the reference to it in the registry. Whenever I turn on my computer. I found and deleted the file, but this error keeps coming back. HELP ME PLEASE!

  The Startup tab looks like the registry.
   
  Try this utility that searches in less common places
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx?ppud=4
   
  Maybe another program trying to start pythizer.exe that is not a
  message we get from booted windows of programs.
  --
  ..
  --
  "Jonny G" wrote in message news: 2a8f4e05-44-cf-480C-8056-7e895939c845...
  > No go I'm afraid. Doesn't seem to be in the start menu. Is there a way
  > watch the "registry"?
   
   

• File.Exists () returns false for standard music folder

  This sounds really weird. File.exists () returns the value false for the symlink and canonical paths!

  The following code has been tested with emulator Q10:

  File musicFolder =    Environment.getExternalStoragePublicDirectory(      Environment.DIRECTORY_MUSIC);
  
  System.out.println(    "Path  \"" + musicFolder.getPath() + "\"  " +
          (musicFolder.exists()             ?  "exists " : "does not exist"));
  
   try {
     musicFolder = musicFolder.getCanonicalFile();
     System.out.println(      "Path \"" + musicFolder.getPath()  +  "\" " +
           (musicFolder.exists()             ?  "exists " : "does not exist"));
  } catch (IOException ex) {
   // Should not be here
  }
  

  Output:

  Path "/mnt/sdcard/Music" does not exist
  Path "/accounts/1000/shared/music" does not exist
  

  By the way, the folder exists and has even some music files in this document, which are played OK.

  Any comments?

  Yes... to access anything under /sdcard, you need the gid of 1000_shared.  That you only get on our platform if you have the permission to android WRITE_EXTERNAL_STORAGE.

  On stock Android, you are READ_EXTERNAL_STORAGE permission granted implicitly (at least for now).  On our own, have not.

  Thus, your application does not have WRITE_EXTERNAL_STORAGE?  If this is not the case, try this.

• PlayBook ndk - camera_take_photo his return with error 17 - file exists

  Fellow developer,

  I use C++ NDK for blackberry playbook (tests with the playbook material) and a problem came in my way. I can take pictures with the camera_take_photo function. I'm trying to capture faster so I'm setting wait to false. In this case camera_take_photo will not block running my application.

  The problem is that if the last call to image_callback of camera_take_photofunction is not yet complete and that I call camera_take_photo once again I'll error as a result. Error code is: 17 who is not related to camera_error_t. I had checked in errno.h and is:

  My question is that this kind of file? I know camera_take_photo is not save any file (only when I implement registration photo).

  Error 17 in errno.h:

  #define EEXIST          17  /* File exists  */
  

  My implementation:

  void CameraModule::takePhoto() {  camera_error_t result1 = camera_take_photo(this->m_CameraHandle, NULL, NULL, NULL, CameraModule::photoImageCallback, NULL, false);}
  
  void CameraModule::photoImageCallback(camera_handle_t cameraHandle1, camera_buffer_t * cameraBuffer1, void * params) {  // JPeG is ready and I can save it  // But this is an empty function for testing  sleep (3000); // do nothing for 3 seconds}
  

  Call us at:

  // Test 1:takePhoto(); // OK
  takePhoto(); // Error 17 from camera_take_photo, but I'm not writing any file
  // Test 2:
  takePhoto(); // OK
  sleep(5000); // Wait some seconds
  takePhoto(); // OK
  

  Flowchart to represent the error:

  

  Reference to the use of camera_take_photo :

  camera_error_t
  camera_take_photo(camera_handle_t handle,
                    void (*shutter_callback)(camera_handle_t, void*),
                    void (*raw_callback)(camera_handle_t, camera_buffer_t*,
                                         void*),
                    void (*postview_callback)(camera_handle_t,
                                              camera_buffer_t*, void*),
                    void (*image_callback)(camera_handle_t, camera_buffer_t*,
                                           void*),
                    void *arg,
                    bool wait);
  

  Your help is appreciated in advance.

  Thank you.

  The solution, I would say something like the following... excuse the pseudocode.

  void* burst_thread() {
      while(!stop_bursting) {
          camera_take_photo(....., still_callback, ..., true);
      }
      stop_saving = true;
      pthread_cond_signal(&queueCond);  // wake queue thread so it can exit
  }
  
  void still_callback(...) {
      to_save = new(...);
      memcpy(to_save, buffer, size);
      pthread_mutex_lock(&queueMutex);
      add_to_save_queue(to_save);
      pthread_cond_signal(&queueCond);   // wake queue thread
      pthread_mutex_unlock(&queueMutex);
  }
  
  void* save_thread(...) {    pthread_mutex_lock(&queueMutex);
      while(!stop_saving) {        if (queue_is_empty()) {
              pthread_wait(&queueCond, &queueMutex);        }
          if (!queue_is_empty()) {
              x = dequeue_buffer();
              pthread_mutex_unlock(&queueMutex);  // unlock while busy
              save_buffer(x);            delete x;            pthread_mutex_lock(&queueMutex);        }
      }    pthread_mutex_unlock(&queueMutex);    // cleanup queue    while(!queue_is_empty()) {        clean up dangling buffers?  or save them to disk. whatever.  just make sure not to leak memory.     }
  }
  
  void start_bursting() {
      stop_bursting = stop_saving = false;
      pthread_create(save_thread);
      pthread_create(burst_thread);
  }
  
  void stop_bursting() {
      stop_bursting = true;
      pthread_join(burst_thread_tid);
      pthread_join(save_thread_tid);
  }
  

  There is a little extra synchronization required in the processing thread: see if (is_queue_empty()).  This is because the thread passes time saving files and cannot be blocked on condvar cheque when the signals of the other thread.  If (check is_queue_empty()) is here to detect these missed signals.

  When someone hits the "start by holding button images", you start the shooting wire and thread photo-economie.  When a user releases the button, or click on a stop button, you report the nets to stop and wait for them to end.

  Note that the termination of the thread of savings made by shooting wire.  This allows to avoid prematurely stop the saving thread when the callback is always enqueueing a buffer.

  See you soon,.

  Sean

• With the help of window 7 can not save the file in the flash player cannot modify a file existing in the drive of the flesh

  Using window 7

  I can not save file in the drive of the flesh

  I can't edit a file existing in the drive of the flesh

  Nothing to do with win7, assuming that your usb ports do not work.

  You should not change the files stored on a USB key, flash drive is a temporary location and must be used to move files.

  Not all flash drives are equal, some are allmost gave, perhaps your failed.

• GhettoVCB: /tmp/ghettoVCB.work: file exists

  

  Hello world

  I use ghettoVCB, recently, I got this error when I tried to do a dryrun or a backup.

  "/ tmp/ghettoVCB.work": file exists

  Ash: wrong number

  I looked in all the documentation, but nothing about this problem as possible. Maybe I need to delete some records, I don't know...

  Best regards

  Samuel

  Everything works now...

  I compare two esxi with the same configuration and I noticed that this directory "ghettoVCB.work" do not exist on the other for the same operations esxi...

  I just delete this folder and the issue is fix.

• IE7 "could not open the file: * path *.» The file exists may not

  I created a package of IE7 a while back which works great.  Apart from this little problem.  It generates an error when the user tries to open a .msg to the WebApp.  It will try to open Outlook and display the following error message.  «Could not open the file: * path *.»  The file exists may not, you don't have permission to open it, or it may be open in another program.  Right click on the folder that contains the file, and then click action to check your permissions for the folder. »

  All the other files attached to work.  PDF, html, txt, rtf, etc.  I tried to move temporary Internet files to a different location with the same result.

  Someone at - it ideas?

  Thank you!

  He was captured on Windows Server 2003 x 64 running on W7 x 64

  Also note that when users choose to save him, it opens fine.  This isn't an "acceptable workaround solution.

  Looks a lot like this one: http://blogs.vmware.com/thinapp/2011/01/locally-installed-applications-and-integration-with-virtualized-internet-explorer.html

• UTL_FILE. OPEN_FILE question to check if a file exists and is not empty

  Hello
  
  I'm writing a code in 3 separate files are created based on certain conditions of parameter for the call of the extract.
  Say that the parameters are NULL, 'A' and 'B '.
  When the Null State is passed to the call of the extract then it should create file A and B if the records are found. If this isn't the case, then create empty files.
  It is possible that the setting of the extract is just 'A', then it would create a file say no zero and B with file from scratch.
  Now when the extract is called with the parameter 'B' and if the file already exists and is not empty then I shouldn't touch/crash with empty folders.
  Is there a simple way I can do this to check if a file exists and is not empty?
  
  I use
  OPEN_FILE
  (gv_utl_file_path
  lv_file_name
  lv_file_handle
  );
  
  Help, please.
  Thank you

  @OP: no need to open

  SQL> declare
    2   lb_file_exist boolean;
    3   ln_size number;
    4   ln_block_size number;
    5  begin
    6   sys.utl_file.fgetattr('TEST_DIR','a.txt',lb_file_exist,ln_size,ln_block_size);
    7   if lb_file_exist then
    8    dbms_output.put_line('a Exists');
    9    dbms_output.put_line(to_char(ln_size));
   10   else
   11    dbms_output.put_line('a Not Exists');
   12   end if;
   13   sys.utl_file.fgetattr('TEST_DIR','b.txt',lb_file_exist,ln_size,ln_block_size);
   14   if lb_file_exist then
   15    dbms_output.put_line('b Exists');
   16    dbms_output.put_line(to_char(ln_size));
   17   else
   18    dbms_output.put_line('b Not Exists');
   19   end if;
   20   sys.utl_file.fgetattr('TEST_DIR','c.txt',lb_file_exist,ln_size,ln_block_size);
   21   if lb_file_exist then
   22    dbms_output.put_line('c Exists');
   23    dbms_output.put_line(to_char(ln_size));
   24   else
   25    dbms_output.put_line('c Not Exists');
   26   end if;
   27  end;
   28  /
  a Exists
  0
  b Exists
  3
  c Not Exists
  
  PL/SQL procedure successfully completed.
  

  Published by: JAC on March 30, 2012 01:21

• Check if a path of the file exists

  I need to check if a file exists. He started to do this by searching for the first file expected in a sequence and that worked, but only when the artists returned correctly. To find this file, I was reading in what was expected and if it has returned true, pass the path of the next folder. Basically, I'm trying to go through the numbered files and find the most recent version, IE version_01

  Probably something like this:

  var myFolderPath = / / your folder path

  var myFolder = new Folder (myFolderPath);

  If {(myFolder.exists)

  do things

  } else {}

  do other things

  }

  Dan

• Test if a remote url file exist?

  I need to check if a mp3 file exists on a remote server. Can someone help me with this code?

  Thank you

  Richie

  It will not return a Yes or no.  It will return a structure.  You can look at that structure to determine if it is a Yes or no.

  As has been pointed out by Alexandre

  
  ...
  
  

  You would be looking for a "200 OK" status.  200 OK is the HTTP status that the URL has been found and returned what was requested.

  documentation.

  http://livedocs.Adobe.com/ColdFusion/8/htmldocs/Tags_g-h_09.html

• Check if a file exists in the network dir (JS)

  I found an old post that made me to:

  If {(myFile.exists)

  Alert ("File Exists");

  }

  on the other

  Alert ("file does not exist");

  The problem is that when I use the macname/volumes/dir/folder/folder/file.indd path (which was created from variables) that myFile script is not conclude to the existence of a file that I know. All I get is the alert "file does not exist.

  I set myFile as being a string?

  I'm still fumbling my way around JS and conversion Applescripts for JS to work cross-platform. Thanks in advance...

  I set myFile as being a string?

  No, set it as follows:

  var myFile = new File("/Volumes/VolumeName/FolderName/SubFolderName/FileName.indd");