A general error occurred; to open the file

Similar Questions

• config file error could not open the file line column 0 0 onfig file error cannot open file row 0 column 0 - whenever I try to open my hp game console

  original title: config file error could not open the file column line 0 0

  onfig file error cannot open file row 0 column 0 - whenever I try to open my hp game console... I get this error message...

  Hello

  Was the HP works well before game console? If Yes, then do you remember any hardware/software changes, after which the problem started?

  Method 1: I would say you put the computer to boot and then check if the problem is caused by any third-party application.

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: I would say as you uninstall and reinstall the HP game console and check to see if it helps:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  You can also try posting your question in the HP Support forums.

  HP Support Forums - operating systems and software

  http://h30434.www3.HP.com/T5/desktop-operating-systems-and/BD-p/OSandSW

• JavaLoader error: could not open the file

  I developed a small application and I'm trying to install it in my camera (Curve 8900) using the javaloader. I used Blackberry plugin for eclipse to develop my app and it works very well in the Simulator. I got the shape of keys BB to sign the application and all of the APIs are now signed.  the javaloader that I use is the one in the eclipse installation folder:

  C:\eclipse clasic\plugins\net.rim.ejde.componentpack4.2.1_4.2.1.19\components\bin

  I use this version because I used to develop the small JRE 4.2.1 application in eclipse.

  and the command is: javaloader.exe u load myapp.cod

  I get just the error: error: could not open the file and nothing is copied to the device.

  The connection is good because I am able to see the device help info: javaloader-u deviceinfo

  I have just the knowledge base on the development for BB and it's my first show stopper...

  Thanks in advance for your help

  This is the solution... I managed to install the application without delay!

  Thank you very much

  Jesus

• Power error: could not open the file exists

  This weekend a partition containing my virtual machines VMWare has been accidentally deleted by the Acronis backup software
  I have rebuilt the partition and re-assigned the same drive letter.
  Then I restored the 'Virtual Machines' from my backup folder.
  Now when I run VMPlayer and start my virtual machine I get the following error:

  Power error: could not open the file 'H:\Virtual Machines\Windows\XP Professional\Windoes XP Professional.vmdk': the system cannot find the specified file.

  The directory search I find the file with the name and the correct directory path.
  Some attributes (readonly, hidden, etc.) are on.
  I am logged in as administrator.

  Is there some other files/directories should I have also restored?
  Suggestions?

  "" According to the newspaper files of the virtual machine has a 40 GB virtual disk consisting of 21 files Windows XP Professional - s001.vmdk '-Windows XP Professional - s021.vmdk. However, the screenshot shows only 5 of these files hard! Please check if you can recover the missing files.

  André

• 2% failed: ERROR: could not open the file %s

  I'm trying to convet system winnt in esx, always fail in the setp2. I tired to convet locally and remotely and get the same error message. Help, please

  10:32 step 1: connecting to Agent VMware Converter on 172.19.129.10

  10:32 step 2: creation of target virtual machine and the conversion of the data

  10:32:05 configuring settings for the virtual machine target...

  10:32:07 creating virtual machine target...

  10:33:04 ERROR: could not open the file %s

  The newspaper has been attached

  I already test the TCP 902 on the source by telnet to the target ESX machine and it seems that TCP 902 is open. The result of telnet has also been downloaded.

  Help, please!

  Problems with vConverter.

  StarWind Software R & D

• VMware Converter failed % 2: ERROR: could not open the file %s

  I'm trying to convet system winnt in esx, always fail in the setp2. I tired to convet locally and remotely and get the same error message. Help, please

  10:32 step 1: connecting to Agent VMware Converter on 172.19.129.10

  10:32 step 2: creation of target virtual machine and the conversion of the data

  10:32:05 configuring settings for the virtual machine target...

  10:32:07 creating virtual machine target...

  10:33:04 ERROR: could not open the file %s

  The newspaper has been attached

  This is the result of that port TCP 443 is blocked?

  Nope

  More likely, the system of the source (172.19.129.10) cannot reach the host ESX by DNS or TCP Port 902 is stuck between them.

  HA - nfc: / /------Corcus [storage2] / [email protected]:902

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• ERROR: Could not open the file %s

  I try to use Consolidator or converter P2V enterprise multi-server Windows 2003 64-Bit.  But I get the following error:

  ERROR: Could not open the file %s

  I'm under VC 2.3 U2 and Converter Enterprise 3.0.3 Build 89816

  I have attached the log of the converter.

  Is there an ideal, which may be causing my problem?

  Thanks in advance,

  -geob

  geob,

  top line of this file indicates something else for the version of converter in use:

  Journal for the VMware Converter, pid = 1892, Agent version = 3.0.2u1, build = build-62456, option = release, section = 2

  Cannot open the %s file is trying to open the VMDK file to copy the data in.

  VMFolder = clone-essapd020-w085/clone-essapd020 - w085.vmdk

  ESX Server: essvmp020 - 006.emrcorp.local:902

  Everywhere where the converter works from cannot do the following:

  Resolve the hostname ESX (essvmp020 - 006.emrcorp.local)

  * There is a NAT between the ESX host and the source system

  * There is a blockage of port on TCP 902

  These are the most common problems.

  Kind regards

  EvilOne

  1 - verification of documents

  2 - search the forums

  3 - Question post

  And don't forget to award points to those who help you.

• Could not open computer management. I m, like__MMC error message cannot open the file C:\WINDOWS\system32\compmgmt.msc

  I am the administrator total privileage still i'm getting the following error...

  MMC cannot open the file C:\WINDOWS\system32\compmgmt.msc

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. Perhaps it is also because you don't have sufficient access to the file.

  I am the administrator total privileage still i'm getting the following error...

  MMC cannot open the file C:\WINDOWS\system32\compmgmt.msc

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. Perhaps it is also because you don't have sufficient access to the file.

  Hey Sandy_Nepal

  read the answer below

  http://www.Winhelponline.com/articles/72/1/error-message-when-you-try-to-open-a-MMC-console.html

  http://www.allpostnews.co.UK/II27/compmgmt%20msc%20error%20messag.php

  Walter, the time zone traveller

• Error Msg: cannot open the file "Windows XP Professional - 000004.vmdk.

  The hard drive on my iMac crashed while my virtual machine is running.  When I try to open the virtual machine 'suspended', I get the following error message: could not open the file "Windows XP Professional - 000004.vmdk"; The system cannot find the specified file.  This file is listed in the contents of the packaging of the XP machine, but it notes the date, the iMac has crashed, which is the last day of work of the virtual machine.  I have read through discussions and tried a few things from the knowledge base, but I can't go past the error msg for the virtual machine to run.  Any suggestions?

  After selecting OK, I then received the second attached message, "Current Message.png", which reads... "your virtual machine has not returned because of an error.  If you believe that the error is correctable and you want to keep the suspended state, so you can correct the mistake, after that the virtual machine is turned off, select Preserve.  To ignore the waking state, select reject. »

  I didn't do anything since getting this second message because I do not know which to choose.

  In this case I'd throw away them.

  If after following your excellent detailed instructions & explanation (thank you!), here is what happened...

  As the machine has begun to resume in a suspended state, that asked me if I moved or copied and I selected, copied.

  In cases like this (restore a Machine virtual sauvegardΘ) the correct answer to this question is "I moved it" even thought "I copied it" seams more logical, it is not the right answer but with the advent of the second error message, not caused by the answer to the first question, no answer would have mattered.

  (if I can just get my prospects for work with this virtual machine files, your help would be invaluable!)

  This Virtual Machine is always recoverable, however if you are only interested in the recovery of data from the user then after reading the following quit VMware Fusion and try to mount the virtual disk to the Virtual Machine using the information below.

  Take a look at: VMware Fusion (menu bar) > help > Search > type VMDKMounter, and then select use VMDKMounter to mount a virtual drive as a Mac Volume

  Notice, ignore the parts on "to add support for reading / writing to NTFS volumes, you need to install NTFS - 3G separately." as it is not necessary for recovering files within the VM using VMDKMounter, because you only need read access to retrieve data from the user.

  After obtaining your user data disassemble the virtual hard disk on the desktop and then after that you want to retrieve the VM using methods from another just let know us and additional directions can be given.

• Satellite U300 PSU3DA: error: could not open the file attribute execution of concept maps

  I have a PSU3DA-U300 which I changed from Vista to XP.
  This is because my main computer use will be for navigation (boat) and I was told that most navigation programs will work better with XP. I have almost nothing on my laptop so far, and the system already seems to be slow and freezing too often.

  My question is now on the program of concept maps which I just installed and which does not open. He repeats to me "Eorror: could not open the file attribute.

  What does that mean? I uninstall and reinstall the program, and he comes back with this message.
  I had a glance at the Device Manager, and the only thing that seems incorrect is the PCI memory controller.
  I did a bit of research on this and it seems that this driver is not required for XP? Is this true?

  Would this be a cause of C-Maps program does not?

  Thanks in advance.

  > I did a bit of research on this and it seems that this driver is not required for XP? Is this true?
  Where did you read this info?
  I put t know if the driver is not required, but you get all the drivers on the Toshiba site.

  For your problem with concept maps, I think that it is best to contact you that support the conceptual maps. Here, this is a forum for Toshiba laptops.

• When running defrag, error "MMC cannot open the file c:\WINDOWS\system\dfrg.msc.

  When I run the defrag I get a message that says "MMC cannot open the file c:\WINDOWS\system\dfrg.msc. It is perhaps because the file does not exist, is not the MMC, or was created by a later version of MMC.

  Hello

  I tried the steps before I posted my question, but it did not work. However, I downloaded SP3 again and it seems to work now.
  Thank you

• Error "could not open the file" *. " INDD. Adobe InDesign may not support the file format, a plug-in that supports the file format is maybe missing or the file may be open in another application."

  How do I solve this problem

  "Could not open the file" *. " INDD. Adobe InDesign may not support the file format, a plug-in that supports the file format is maybe missing or the file may be open in another application."

  It turns out that a Windows computer has been infected by a virus that worked its way to the server. We zapped the virus and restore the backup files.

• Error message cannot open the file PF.zip draws in learing Adobe Total training, "The TXLO7ES_PF.zip is not a valid Win 32 application".

  Original title: Why do I get a message that a Total Training Adobe project file cannot be opened because it is not a valid Win32 application?

  I can't open a file PF.zip of the learing Adobe Total Training Library. I should be able to double-click on the file and it should work. Instead, I get a message that says: he cannot find the right... program and then another message said that "the TXLO7ES_PF.zip is not a valid Win 32 application."  Adobe technology training Total said that it looks like a Microsoft problem and she could not help me. I would really appreciate help with this.

  Hello

  1. Are you able to open another PDF and zip files?
  2. Did you the latest changes on the computer before this problem?

  This problem can occur if the file is corrupted, incorrect or missing and if the file is infected with the virus, a worm, or other malware.

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.
  Error "not a Win32 application invalid. File downloaded
  http://helpx.Adobe.com/x-productkb/global/error-valid-Win32-application-downloaded.html
   
  Method 2:
  If you have downloaded this file and verified that it is complete and compatible with your version of Windows, delete the file and try to download and run again. It is possible during the download, the file is corrupted.
   
  If the second download does not work, try to download the file to a different Web page. It is possible that the person or company to maintain the website downloaded by mistake a corrupted version of the file that you are trying to download.
   
  Method 3:
  If the problem persists you can scan your computer anti-virus using the Microsoft Safety Scanner.

  Microsoft safety scanner will help us to get rid of software viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Warning: If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

  Hope this information is useful.

• config file error could not open the file column line 0 0

  Games worked very well... went out of town for two weeks, now receive above error when you try to open the games.

  Any help is appreciated.

  I also discovered the same question and was lucky enough to happen across this FIX somehow. It instantly fixed the issue.

  http://www.WildTangent.com/gamesapp?DP=hpipg

  Some files have been deleted, or maybe even. I couldn't find the files as indicated when looking in my files. IT WILL WORK! Good luck!

• Error: could not open the file splittet files

  Try installing Adobe Digital Edition and get the error "Could not open file for splittet files."  Have removed and installed all the adobe reader and flash programs very well, but can not get it to install.  Ideas?

  Hello

  I suggest you contact Support Adobe as the error seems to be related to this product.

  http://www.Adobe.com/support/

  You can also post your query on the Adobe forums for assistance.
  http://forums.Adobe.com/index.jspa