Error Msg: cannot open the file "Windows XP Professional - 000004.vmdk.

Similar Questions

• Could not open computer management. I m, like__MMC error message cannot open the file C:\WINDOWS\system32\compmgmt.msc

  I am the administrator total privileage still i'm getting the following error...

  MMC cannot open the file C:\WINDOWS\system32\compmgmt.msc

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. Perhaps it is also because you don't have sufficient access to the file.

  I am the administrator total privileage still i'm getting the following error...

  MMC cannot open the file C:\WINDOWS\system32\compmgmt.msc

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. Perhaps it is also because you don't have sufficient access to the file.

  Hey Sandy_Nepal

  read the answer below

  http://www.Winhelponline.com/articles/72/1/error-message-when-you-try-to-open-a-MMC-console.html

  http://www.allpostnews.co.UK/II27/compmgmt%20msc%20error%20messag.php

  Walter, the time zone traveller

• When running defrag, error "MMC cannot open the file c:\WINDOWS\system\dfrg.msc.

  When I run the defrag I get a message that says "MMC cannot open the file c:\WINDOWS\system\dfrg.msc. It is perhaps because the file does not exist, is not the MMC, or was created by a later version of MMC.

  Hello

  I tried the steps before I posted my question, but it did not work. However, I downloaded SP3 again and it seems to work now.
  Thank you

• Cannot open the file Windows XP Proffesional.vmdk

  I can not power

  on cuz VM of this error, cannot open the file path ' ' Wnidows XP Professional.vmdk, the system does not give especified. Someone knows how to fix this? Help me pls.

  From what I have read it could be a corrupt vmdk file, so I'll share my for you guys.

  None of the binary scopes, "Windows XP Professional - s001.vmdk ' via ' Windows XP Professional - s305.vmdk", lack or size of 0 bytes?

• Error message cannot open the file PF.zip draws in learing Adobe Total training, "The TXLO7ES_PF.zip is not a valid Win 32 application".

  Original title: Why do I get a message that a Total Training Adobe project file cannot be opened because it is not a valid Win32 application?

  I can't open a file PF.zip of the learing Adobe Total Training Library. I should be able to double-click on the file and it should work. Instead, I get a message that says: he cannot find the right... program and then another message said that "the TXLO7ES_PF.zip is not a valid Win 32 application."  Adobe technology training Total said that it looks like a Microsoft problem and she could not help me. I would really appreciate help with this.

  Hello

  1. Are you able to open another PDF and zip files?
  2. Did you the latest changes on the computer before this problem?

  This problem can occur if the file is corrupted, incorrect or missing and if the file is infected with the virus, a worm, or other malware.

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.
  Error "not a Win32 application invalid. File downloaded
  http://helpx.Adobe.com/x-productkb/global/error-valid-Win32-application-downloaded.html
   
  Method 2:
  If you have downloaded this file and verified that it is complete and compatible with your version of Windows, delete the file and try to download and run again. It is possible during the download, the file is corrupted.
   
  If the second download does not work, try to download the file to a different Web page. It is possible that the person or company to maintain the website downloaded by mistake a corrupted version of the file that you are trying to download.
   
  Method 3:
  If the problem persists you can scan your computer anti-virus using the Microsoft Safety Scanner.

  Microsoft safety scanner will help us to get rid of software viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Warning: If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

  Hope this information is useful.

• MMC cannot open the file C:\windows\system32\WF.msc

  When I try to open the Action Center, I receive this message. MMC cannot open the file C:\windows\system32\WF.msc

  Hello

  Thanks for posting the question in the Microsoft Community forums.

  According to the description, you get a message of error 'mmc cannot open the file C:\windows\system32\WF.msc' when you try to open the center of the Action.

  We will perform the steps and check.

  Method 1:

  
  Try to access the Windows Firewall configuration through the console Microsoft Management console.
  
  a. click on start
  b. type MMC (right-click and choose Run as administrator)
  c. click on file (in the upper right corner)
  d. click Add/Remove snap-in software component
  e. Select Windows Firewall with advanced settings, in Add Remove snap-ins windows
  f. click Add (clicking ok does not make any changes)
  d. click OK and you should be able to use the settings of the Console 1 window.
  
  Method 2:
  
  If you are able to use the settings of the firewall through MMC, then scan your computer for corrupt system files.

  Perform a SFC scan on your computer. Consult the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information helps. Please reply with the status so that we can help you.

• "Cannot open the file due to a header error"

  I got a sequence already edited, I have windows 8, updated to the latest version (still no 8.1) and after the update, the videos that I had edited are offline and when trying to connect to display the error message "cannot open the file due to an error header. What could be? the video is already published, but is now in offline mode.  Help, please.

  If you can read the files in a media player, you may be able to correct them. Avidemux can open and save again without re-encoding. If there is just a bad game, you can also cut with avidemux. If this does not work, you can try to re - encode.

• I can't open microsoft office outlook. It says cannot open the outlook window. I tried to run "outlook.exe/resetnavpane, but it shows and error msg 'make sure you typed the name correctly and then try again.

  I can't open microsoft office outlook. It says cannot open the outlook window. I tried to run "outlook.exe/resetnavpane, but it shows and error msg 'make sure you typed the name correctly and then try again.

  I can't open microsoft office outlook. It says cannot open the outlook window. I tried to run "outlook.exe/resetnavpane, but it shows and error msg 'make sure you typed the name correctly and then try again.

  There is a SPACE between 'exe' and ' / '. You didn't have that. That's why.

  Please copy and paste it in the search box ot Run box... outlook.exe /resetnavpane

  t-4-2

• WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D,.

  IM TRYING to re - INSTALL WINDOWS VISTA ON MY T-6321 to the front door, BUT WHEN I INSERT THE DISC, AND INSTALL, a MESSAGE APPEARS SAYING: WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D, SHOULD ALL BE ON THE DISCALREADY?

  Hi JRCLNSIN100,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         What is the disk you use to reinstall?

  ·         Is this a recovery or reinstalling the disc you are using?

  ·         When exactly do you get this error message?

  ·         What is the edition of Windows Vista, you try to install?

  ·         How old is the drive that you are using?

  ·         How are you starting the installation process?

  After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.

  First check if you have scratches or dust on the disc and clean the surface and try again.

  To check if the disk is wrong, you will need to copy the contents of the DVD to the hard drive and try to install using that.

  To perform a flat installation of Windows Vista, follow these steps.

  Note The hard disk must have at least 3 GB of free space on the disk for the Windows Vista installation files. The hard disk must have at least 15 GB of additional disk space to install Windows Vista. For more information about system requirements for Windows Vista, see the Microsoft Web site at the following address:

  http://www.Microsoft.com/Windows/products/windowsvista/editions/SystemRequirements.mspx

  1. Insert the Windows Vista installation disc.
  2. Start Windows Explorer.
  3. In Windows Explorer, click to select the drive for the Windows Vista installation disc.
  4. On the Edit menu, click select all.
  5. On the Edit menu, click copy.
  6. Click to select the hard disk you want to contain the flat installation files.
  7. On the file menu, point to new, click the folder, type Windows Vista Setupand then press ENTER.
  8. Double-click the Windows Vista Setup program, and then click Paste on the Edit menu.
  9. Double-click Setup.exe, and then follow the instructions that appear.

  See the link below for more information on flat installation.

  How to perform a flat installation of Windows Vista

  http://support.Microsoft.com/kb/928902

  This problem can also occur if the firmware of the DVD drive is defective or obsolete.

  If the step above does not resolve the question suggests that you install the latest drivers for the DVD player on the computer.

  For more information please visit the link below.

  Error message when you try to install Windows Vista by using the DVD drive on the computer: "Windows cannot install required files".

  http://support.Microsoft.com/kb/930984

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thanks and greetings

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 2k8R2 - receiving error when you connect (MMC cannot open the file: C:\Windows\system32\ServerManager.msc)

  Windows 2008 R2 - I just started getting this when I connect, and also when I try to manage the machine:

  MMC cannot open the file:

  C:\Windows\system32\ServerManager.msc

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. This may also be because you don't have sufficient access to the file.

  It always worked before and work for other users simply not me on this particular area. It is a production company, and I need a quick resolution please. Thanks in advance.

  PM

  Hello

  Your Windows is better suited for the public of Windows Server on TechNet. Please post your question in the TechNet Windows server forum.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

• When you try to run the defragmentation, getting the error "mmc cannot ope the c:\windows\system32\dfrg.mmc file.

  I really need to defragment, but I get this error msg.   MMC cannot open the file c:\windows\system32\dfrg.msc

  
  
  I've had this problem for awhile now and simply ignored. I have no need to defragment is an important channel now. Help, please?
  Thank you;
  Gail

  Hi hhgail,

  See the article following some possible troubleshooting:

  http://support.Microsoft.com/kb/914231

  I hope this helps!

• XP, Windows Media Player tries to open each file and responds with, "windows media player cannot open the file.

  I can't even go to open, ' Change / Remove Programs "Control Panel. Same shortcuts on my desktop are not open without WMP trying to open the first file. Why is it in the middle of everything? How can I disable WMP or stop trying to open all files, media files that are not same? There version of WMP 9, but when I try to download a newer version, it won't work because WMP keeps popping up, saying: it cannot open the file.

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Perform the steps in the article mentioned below and check if the problem persists.

  Windows Media Player invalid file Error Message Format

  Hope this information helps.

• config file error could not open the file line column 0 0 onfig file error cannot open file row 0 column 0 - whenever I try to open my hp game console

  original title: config file error could not open the file column line 0 0

  onfig file error cannot open file row 0 column 0 - whenever I try to open my hp game console... I get this error message...

  Hello

  Was the HP works well before game console? If Yes, then do you remember any hardware/software changes, after which the problem started?

  Method 1: I would say you put the computer to boot and then check if the problem is caused by any third-party application.

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: I would say as you uninstall and reinstall the HP game console and check to see if it helps:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  You can also try posting your question in the HP Support forums.

  HP Support Forums - operating systems and software

  http://h30434.www3.HP.com/T5/desktop-operating-systems-and/BD-p/OSandSW

• Cannot open Device Manager or services.msc a message box pops up it says "MMc cannot open the file C:\Windows\system32\devmgmt.msc.

  Original title: I can't connect to my wireless network. My convenience store does not work and I can't open the network and sharing Center. I'm sure it's some type of virus. Help, please.
  It says "an unexpected error has occurred. The Troubleshooting Wizard can not continue. "When I try to run the troubleshooter.

  When I try to open Device Manager or services.msc a message box appears, it says "MMc cannot open the file C:\Windows\system32\devmgmt.msc.

  He said also my Defender pro subscription has expired, even if I've just recently added a one year subscription.

  Hello

  You did changes to the computer before the show?

  Method 1:
  Try these steps and check if it solves the problem:
  a. click Start, type cmd, right click and select run as administrator.

  b. at the command prompt, type regsvr32 msxml3.dll , and then press ENTER.

  Method 2:
  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 3:
  Run a Microsoft security scanner to make sure that the computer is free from virus infection:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted

  See the steps in the link and check.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Cannot open the file due to a header error Error Message.

  Hello

  If you're still trying to import an audio file (wav) in Adobe Premiere (or any other program) and get this error "Error Message.
  Cannot open the file due to a header error"

  Try to download this utility (found my copy Guide Fassoft Audio Converter of Tom.  I imported my wav file in the utility and then converted 'back' to another wav file in another folder.  And fixed it.

  There is a limit of 5 minutes on the trial version, but my audio file was less than 5 minutes, so it worked for me.

  I don't know that there are other similar utilities, so try any utility "Audio Converter" to see if it will fix your audio file.

  It worked for me.  Perhaps others have alternatives they would recommend.

  Rowby

  Hello

  I found a better (free!) utility to do this. (The free version of Fassoft Audio Converter has audio length limits).

  It is called MediaHuman Audio Converter and I found this site: http://www.mediahuman.com/audio-converter/welcome.html

  MediaHuman has worked on my windows 10 computer and does the work to 'fix' the question header error. Import the wav damaged and then exported to a new folder.

  Rowby