'A homegroup can be created on a home network', but I'm on a home network

Similar Questions

• Homegroup question - error "a homegroup can be created on a home network.".

  I read a lot of messages and no cover up my problem. I worked through programs of solving problems without result. The network in the network and sharing Center show that my current network is a home network. I want to create a homegroup and click on create and then click on create a homegroup ready to use. I've selected all the sharing options, and then click Next. The process starts and then I get the following dialog "a homegroup cannot be created on a home network... etc.". Why is this occurs when my network is a home network? I tried all built-in diagnostics programs. In the list of services HomeGroup provider runs as is the peer networking grouping.

  I have a router broadband connections LAN and Wi - Fi a desktop PC connected via Powerline LAN, a printer, which can be LAN or USB or WiFi, a laptop and a Tablet, between all that I want to communicate.

  Where I'm going wrong? I have an administrator account and my normal account. Any action that requires authorization from the admin marked upward and the relevant password entered.

  There, can someone help me please?

  So to use the new Windows 7 homegroup feature, you must make sure that IPv6 is enabled.

  You can check to see if IPv6 is enabled on your computer, click Start , and then type network in the search box.

  Then click on network and sharing Center.

  Then click on change adapter settings in the left pane of the dialog box

  Finally, right click on your network connection, and choose Properties. Here you should see Version 4 (TCP/IPv4) and Internet Protocol Version 6 (TCP/IPv6) in the list, and they both need to be audited.

  also

  Make sure that third-party firewalls are disabled as Comodo, etc. Sometimes antivirus programs also come with firewall such as Norton, Kaspersky and McAfee Security software. These programs can block connections and help you connect to a homegroup or implementation.

  one last thing to try! GO TO YOUR BUTTON 'START' AGAIN...

  TYPE 'SERVICES' AND WHEN YOU SEE THE REQUEST FOR 'SERVICES '.

  OPEN THE PROGRAM (SELECT RUN AS ADMINISTRATOR)

  THEN... ENSURE THAT THESE SERVICES LISTED BELOW ARE TURNED ON (MAKE SURE THAT "STARTUP TYPE" IS SET TO AUTO MATIC... THE FOLLOWING SERVICES ARE CORRECT, YOU MUST MAKE SURE ARE "ON" AND NOT ORDERS:

  Services that need to be turned on are listed below:

  • DNS client
  • Function Discovery Provider Host
  • Function Discovery Resource Publication
  • Peer networking grouping
  • HomeGroup provider
  • HomeGroup listener
  • SSDP Discovery
  • UPnP device host

• How can you create/go ' into a network?

  How to create a network?

  How are you networked?

  How to create a password to a network?

  Hi Gordonlee,

  Welcome to the Microsoft Community and thanks for posting the question. After the description provided to create a network in Windows 7.

  Answering these questions that would help us provide a better solution:

  1. what type of network you want to create?

  2 what type of network you create the password?

  Try these steps and check:

  Method 1:

  Visit this link to create a network:

  http://Windows.Microsoft.com/en-us/Windows7/start-here-to-set-up-a-home-network-in-Windows-7

  For more information:

  If you have three to 4 computers on the same network, and if they are using Windows Vista or Windows 7, visit this link to create a House Group.

  http://Windows.Microsoft.com/en-us/Windows7/create-a-HomeGroup

   
  Homegroup from start to finish
  http://Windows.Microsoft.com/en-in/Windows/HomeGroup-help#HomeGroup-start-to-finish=Windows-7&V1H=win8tab1&V2H=win7tab1

  Method 2:

  If you want to add a device to a network, visit this link:

  Depending on the operating system your computer is running, and if your network devices support newest technologies, the steps for adding a device or a computer to the network will vary

  Add a device or computer to a network

  http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network

  Method 3:

  Visit this link and try the steps mentioned in it to secure a network:

  http://Windows.Microsoft.com/en-us/Windows7/making-your-network-more-secure

  If you have created a wireless network and you want to secure it visit this link:

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-security-key-for-a-wireless-network

  See also:

  Why should I get my wireless network?

  http://Windows.Microsoft.com/en-us/Windows7/why-should-I-secure-my-wireless-network

  If you want more response information and we will be happy to help.

• I can't create an ad hoc network. Although activation of the ics, another computer does not have internet access.

  After you enable ics, then also internet sharing can't.

  Hello

  The routers are much easier and they don't cost much.

  These should help:

  References to Vista also apply to Windows 7.

  Set up a computer-to-computer (ad hoc) network
  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Ad hoc networking - how the network with the funny name can make your life easier
  http://Windows.Microsoft.com/en-us/Windows-Vista/ad-hoc-networking-how-the-network-with-the-funny-name-can-make-your-life-easier

  How to build a wireless network without using a router at wide band (also Windows 7)
  http://www.hardwaresecrets.com/article/how-to-build-a-wireless-network-without-using-a-broadband-router/418

  Build a Wireless Home network without a router (also Windows 7)
  http://www.labnol.org/software/wireless-network-without-router/11494/

  How to share files and printers on your network
  http://www.hardwaresecrets.com/article/how-to-share-folders-and-printers-on-your-network/247

  -------------------------------------------------------------------------

  Other solutions include the use of these that turn your WiFi PC into a virtual router
  instead of using the ad hoc network.

  Connectify
  http://www.Connectify.me/

  Virtual router
  http://virtualrouter.codeplex.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Failed to create the pool of network VXLAN

  I tried to get VXLANs working with the vcloud Director, but have had a problem that I can't work on it would be really grateful for the help.

  I went through the config VXLAN Vshield Manager and I think it's ok that I can manually create a pool of network a network, create a virtual wire and attach VMs. If everything looks good. My problem is that when I create a provider VDC in Vcloud Director the associated network pool creation always fails. I don't have to provide the exact error message, but it is something in the sense of 'Vcloud Director received an unexpected response or Manager unknown Vshield, see the logs for Vshiled Manager for more information'. I looked in Vshield Manager logs and can't really find something useful, but it is a bit of a nightmare, I can just be looking in the wrong place.

  Anyone got any ideas?

  TIA

  can you confirm/update of credentials here:

  connect to vcloud

  go to list of vCenters manage and monitor

  Right-click the vCenter to that that vShield Manager is associated

  Click on properties

  update the user names and passwords in two tabs

  Click OK

• Can I create a network on my Eee PC 1000 H Windows XP Home Edition user?

  Can I create a network on my Eee PC 1000 H Windows XP Home Edition user?

  I want to experience connect me to other computers in my house with the same user name and password. I use it with Windows XP Professional to my work, and I want to know how to deal with the publishing house.
  I have the Eee PC 1000 h running (active) Windows XP Home Edition (Service Pack 3) with OEM product key.
  If I can, can someone please tell me how?

  I'm assuming you're network connection to your XP Pro using the "Remote Desktop connection" machines...  If so, this can be done natively on a XP Home machine as XP Home does not support the remote desktop connection.  XP Home Edition also ensures a file sharing Simple for any user that connects to your computer would be able to authenticate the user "guest".

  There may be other 3rd third-party programs that can allow you to do.

  HTH,
  JW

• How can I create a bootable for XP home CD

  How can I create a bootable for XP home CD?

  If by chance you reinstall xp sp2 via cd, you can create a bootable cd of xp sp3 via a method called "slipstreaming".

  It is relatively easy and requires files sp2 from your cd to merge with the update to sp3 from microsoft, and then make an iso to burn it to a cd.

• How can I create a shortcut to "change user" on the desktop using rundll32.exe in Vista Home Premium?

  I am trying to create the shortcut to "change user" using rundll32.exewithout to create the shortcut to "lock", only to pass the user. I already know that I have to right click on an empty space on the desktop, press New\Shortcut and type%windir%\System32\rundll32.exe user32.dll,but not after the comma. Type so I can only create the shortcut to "change user" and not the shortcut to 'lock '? (This means that I don't want this: %windir%\System32\rundll32.exe user32.dll, LockWorkStation, with LockWorkStation after him.)

  Unfortunately, it can be done in your version of Vista (or so they say, hang on a moment.)  I found the article according to that cllaims to do in Vista Basic and Vista Home Premium in addint a file and shows a set of procedures.  As it is a 3rd party file, do so at your own risk. http://www.vistarevisited.com/2008/08/02/create-a-desktop-shortcut-to-switch-users-in-vista/.  NOTE: This is not how you suggested higher, but if it works who cares?

  In case you don't want to consider the solution above, you have refused, here is the procedure (how to do it in other versions of Vista):http://www.vistax64.com/tutorials/136969-switch-user-desktop-shortcut.html.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can I create recovery DVDs after installing Windows XP Home edition?

  Hello

  I have a laptop Toshiba Satellite L300. I formatted the c drive and installed windows xp, but soon I realized that I forgot to create a recovery disk.
  Now the F8 does not work, but the drive d and hddrecovery the folder that contains the files of Toshiba recovery still exists. 3.8 GB of data is located in this folder.

  Is it possible to create a recovery disk now. Thanks already.

  Hello

  Recovery DVDs can be created with the special tool only. The name is Toshiba Recovery creator. This tool is part of the Vista installation only factory settings.

  So now, you can not create recovery media and there is no way to launch the installation of F8 HARD drive recovery. I do not understand why you ignored Toshiba reminder on creating recovery DVDs.
  Anyway, you can order the new copy under https://backupmedia.toshiba.eu/landing.aspx

  Bye and good luck!

• I upgraded my Vista Home premium to windows 7 ultimate, shortcuts on the desktop are not displayed, and can be created, or any folder cannot be created until the flash drive is reinserted

  during the upgradation he automatically took backup to an external flash drive, now every time I have to run has previously program I have to insert this flash drive.
  also all the shortcuts on the desktop are not displayed, and can be created, or any folder cannot be created so that the flash disk is reinserted

  Hi subhshy001,

  Welcome to the Microsoft Windows answers Forum community!

  Try this if you do not have

  Windows Explorer to create the folders and shortcuts in your document folder, drag and drop them on your desktop.

  If you have completed the steps and was not even useful,

  Follow these steps:

  Try to create a shortcut and sending it on the desktop.

  (1) open: Start Menu ,.
  (2) right-click: Internet Explorer icon .
  (3) select: send to > desktop (create shortcut).

  There should be a shortcut on the desktop .

  Make sure that the "show desktop icon" has a check against it

  OR

  Just click on the empty part of the desktop, choose new > then select the folder to create. Right click on this folder , select Rename it.

  If the steps above do not work then:

  You can scan your computer for malware.

  You can download, install and update anti-malware free of your favorite search engine and find malware.
  
  Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  If the scan comes back clean, so I recommend doing a System File Checker too l to analyze your OS system files.

  To help resolve this problem, use the tool (SFC.exe) System File Checker to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. open an elevated command prompt . To do this, click Start , click principally made programs , Accessories , right-click guest , and then click run as administrator .  If you are prompted for an administrator password or a confirmation, type the password, or click allow .
  2. type the following command and press ENTER: sfc/scannow (Yes there is a space after sfc) the sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. This analysis do take some time to complete.

  Hope this information helped!

  Thank you, and in what concerns:

  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• I can't connect to my home computer via homegroup computer House.

  I can't connect to my home computer, having a home group, using my computer at home.

  Hello

  Please contact Microsoft Community.

  I understand that you are unable to connect to the home group.

  I will definitely help you with this.

  Please provide the information below.

  1. you get any error message?

  2. don't you make changes to the pc before that?

  I suggest you go through the below methods:

  Method 1: Try to run the troubleshooter from home group:

  1. Press Windows + R key.

  2. Type command and press ENTER.

  3. Click on troubleshooting.

  4. In the left pane, click View all.

  5. In the list, double-click Home Group and run Diagnostics.

  Method 2: Try the clean boot:

  A clean boot is executed to start Windows by using a minimal set of drivers and startup programs. This will eliminate the conflicts of software that occur when you install a program or an update or when you run a program in 8.1 of Windows, Windows 8, Windows 7, or Windows Vista. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  I hope this helps. Please post back with the State of the question and we will be happy to help you further.

• can't connect to my home internet income james ashley forgot it the link password does not work and the password I was given does not fit into the password box

  can't connect to my home internet income james ashley forgot it the link password does not work and the password I was given does not fit into the password box

  Are you sure that you do not have to register on this site through the usual way and what you should be used elsewhere on the site?

  Have you tried to contact them to help this topic or to check if they have a FAQ on this subject?

  I found this in another thread that you created [*]:

  I'm not sure do I bought a home income internet james ashley program and I copied the login info I was given and the password does not fit into the window of password and I forgot the link password does not work I sent emails, but do not receive an answer im don't know what to do is anyway you can help me to recover my info or help me change the password?

  I assume that you have downloaded and installed this program and need to use this password in this program or only you can use these data to download the program from the site james ashley?

• NB100 - How can I create a recovery on a USB CD?

  Hi friends,

  I recently got a NB100 with XP home. The operating system has been reinstalled and did not have any CD of the operating system.

  Given that I have not an external CD drive how can I create a recovery on a USB CD. I would like to see the function of USB USB just like the CD in case something really goes wrong.

  Can some help me to find a tutorial to do this?

  Thanks for your help.

  SAJ.

  Great! Thanks for sharing this with us!

• Re: Can you create discs recorvery to new windows 7

  Hi all
  can you create a recorvery disk that ships with toshiba tools and those added software when you buy a new proffessional of windows 7?

  _sceaniro_
  I have a toshiba laptop with vista home premium and I just bought windows 7 Professional of the store, but according to Microsoft, upgrade is not an option, and I still want the programs supplied with the laptop and toshiba small logo when you check the properties of the computer?

  How should I go about this?

  > How should I go about this?
  # Create the recovery disk under original operating system preinstalled with the so-called factory settings. you will have no problems in this regard and will help you avoid errors that can occur after the upgrade of the operating system.
  # If you want to use all the stuff pre-installed as Toshiba specific tools and utilities you can simply upgrade Vista preinstalled.

  You can also do the clean install of Win7 and later install all the necessary drivers and tools and utilities.
  Can you please tell us what model phone you have and what Toshiba programs you want to use under Win7?

• After updating IOS 9.2, I lost all the Homekit settings. Cannot create the same 'home' once again, but is not visible in my Homekit settings.

  After you run the 9.2 for my iPhone IOS update 6, he seems to have lost all my settings Homekit. It is no longer my 'home' available in the Homekit parameters or in the application "Eve", or in the application 'Home' or the Insteon. Can not create new 'home' with the names I've used before, but not room for a list of people or to reset. Homekit does more work in my house.

  Initially, I SHADE (8) Phillips lamps and 6 Elgato Eve door / window sensors.

  Please help ;-)

  Noticed on my iPad (IOS 9.2 update) the Homekit settings are still there. Now trying to close the session and come back in iCloud in my iPhone, checking if it will work