A layer can emulate the changes to another layer?

Similar Questions

• You can cancel the sync with another computer on a network?

  My desttop computer was set to automatically sync with a folder and its subfolders on another office in a network.  The purpose of the sync has been backup.  Today, the other computer had a malfunction serious and removed about 20 subfolders. The removal was detected immediately. I checked and found that missing subfolders were on my computer. BUT (I'M A FOOL!) I failed to realize that my computer was still periodically synchronize with the computer 'bad '. Suddenly, after about 10 minutes, subfolders missing from the 'bad' computer have now disappeared from mine as well! Immediately, I went to offline and off the synchronization mode once the horse was out of the barn.

  Is it possible to cancel fatal synchronization that deleted synched subfolders? -Can I somehow recover subfolders that had been so easily available on my computer?

  Yes, you can stop the clock, but no, you cannot cancel it (unless you have a backup of the files stored elsewhere).  You will need to retrieve the files and folders by using shadow copies (if you have one) or with the recovery software from 3rd party (see below for more details).

  If you have Vista Business, Vista Ultimate or Vista Enterprise, you can be lucky.  They have so-called saves shadow copies, which are deleted or modified files that can be recovered in case changes/deletions made by mistake.  http://www.Microsoft.com/Windows/Windows-Vista/features/shadow-copy.aspx more information about how to use this feature to: http://blogs.techrepublic.com.com/howdoi/?p=145.

  If you have Vista Basic or Premium of Vista, shadow copies is not available; However, there is an alternative that is free and the shadow copies feature called Shadow Explorer. http://www.howtogeek.com/howto/windows-vista/recover-files-with-shadow-copies-on-any-version-of-windows-vista/.  Although it will not help you this time, it could very well save you in case this happens again.

  In case this does not work (not all files are available through shadow - it occurs periodically), here are some additional free recovery programs that might help:

  http://www.r-TT.com/

  http://www.SnapFiles.com/get/DiskDigger.html

  http://www.SnapFiles.com/get/easusdfr.html

  http://www.SnapFiles.com/get/restoration.html

  http://www.SoftPerfect.com/products/FileRecovery/

  http://www.SnapFiles.com/get/undeleteplus.html

  http://www.Piriform.com/Recuva

  http://www.munsoft.com/EasyDriveDataRecovery/

  http://techpaul.WordPress.com/2008/06/23/how-to-recover-your-lost-files/

  The files are not really deleted until they are crushed (although they are no longer available through conventional methods).  If you decide to try these recovery programs, you should stop using your drive hard immediately in order not to replace the data that you are trying to recover.  He slave on another PC and launch the recovery of this PC.  Even now you have definitely lost some of them if you use the same PC.  If you can not do this (slave on another PC), you run the risk of overwriting the data with every action you do on the PC (but you may still be able to recover some or most or even all files - it's a matter of luck).

  Only you can decide if the data is important enough to take the PC to an expert data recovery to recover files (they will have better programs and hardware to do that none of us do, and I've provided above).  Do NOT go to the Geek Squad or one of these centers of store-, they generally don't know what they are doing - it take for expert data recovery.  It will cost you a little and they generally offer no guarantees.  The decision is yours.

  Good luck and I hope this helps!

  Lorien - a - MCSE/MCSA/network + / A +.

• Reflecting the changes of another production DB DB production

  Hello
  
  I have a plant database (A) and 3 other small production databases(B,C,D). I need to copy all the changes that occur in B, C and D in one every day. What suggest you is the best way to do it? Just a thought, can us export/import between B - A, c.., D - has or should we do an import/export in A test database and then an another export/imp on the main production database.
  
  No details on this will be highly appreciated.
  
  Thank you
  Somd

  Import duplicate records will give you a violation of primary key constraint.

  For this kind of solution for work, you'll end up made a lot of programming using staging tables and home made conflict resolution algorithms.

  This will not be a good idea if you think this solution maintenance in time and the effort to re - invent something that is already built inside the database, like the river.

  Kind regards.

• In the command prompt, cannot use the change to another cd drive

  Hello

  At the command prompt, the current directory is c:\Windows, I use the command "cd J:\new", but I still in c:\Windows, is there anyone can understand it? THX.

  CD change directory. You must use J: ENTER to change the player j. "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• If I buy a used ipad can get the changed password

  If I buy an ipad 2 opportunity get the password changed so the seller forgot it?

  If the seller forgot https://iforgot.apple.com/password/verify/appleid#! & section = password

  otherwise, you and the seller must go to an apple store with proof of purchase

• Can I turn off the change of focus from one object to another?

  Hello.

  I have a game where i control a MC with the arrows on the keyboard, when I click outside of the application flash and back in the MC loses focus. The focus moves to a button in the scene. What I have observed, is that Flash Player has a built-in control, which moves the focus from one element to the other with the arrow keys.

  Is there a way I can disable the change of focus from one object to another?

  Thank you.

  Why you need such a thing...

  Is it true that you lose the focus of your video clip and that's your keyboard listeners do not work?

  And you want to work.

  For this situaton I ideally add my Council key on the stage event listeners and the rest of the creation of the logic accordingly.

• I bought an OEM version of Windows 8 64-bit from an online retailer. Think about changing the motherboard and I can transfer the license to it or not?

  I bought an OEM of Windows 8 64-bit of an online retailer and I was wondering if this is considered a one-time activation? Because I think about replacing my motherboard and there seems to be a lot of conflicting info on knowledge if I can transfer the license or not.

  Original title: reactivation of Windows 8

  If this is the license OEM System Builder, that you bought, it includes transfer rights, which means that you can move to another motherboard and turn it back on.

  http://personaluselicense.windows.com/en-US/default.aspx,

  
  

  "I can transfer the software to another computer or user? ." You can transfer the software to another computer owned by you. (You can also transfer the software (as well as the license) to a computer that belonged to someone else if one) you are the first user under the software license and b) of the new user accepts the terms of this agreement. To make a transfer, you must transfer the original media, the certificate of authenticity, the product key and the proof of purchase directly to the other person, without keeping all copies of the software. You can use the backup copy that we do or the media the software provided on transfer the software. Whenever you transfer the software to a new computer, you must remove the software from the previous computer. You can not transfer the software to share licenses between computers. You can transfer the Get Genuine Windows, Pack Pro or Media Center Pack software only in combination with the licensed computer. »

• How can I remotely change the IP address of a host ESXi 4.1

  I have 2 VMWare ESXi 4.1 hosts who have been moved to the customer site.

  They are currently configured to use DHCP, but I need to return the two static IP addresses.

  How can I do this?

  I can do it in vSphere CLI?

  If so, how should I do this?

  I have never used vSpehere before CLI, so need a full breakdown, including please how to connect to the host...

  I have reviewed the documentation, but it's a little hard to understand.

  Thank you

  Hiya,

  You are able to get physical access to the ESX host?   I don't know if you can make the change remotely, because in order to change the IP address, you need to remove the network card.   Remove the adapter effectively cut off access to the network that you use for remote administration.

  Could you possibly get a 2nd active connection through DHCP network connected to the ESX host (must double NIC?)?   Then you could probably remote in on the 2nd link and delete/recreate the 1st.   Worth a try at least!

  Origin: VMware KB article (here: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=4309499 )

• Why the owner listed in the changing properties of file on our shared drive?

  I'm going to create a file from my computer (let's say is assigned the name "USERS/Person1") and save my company shared drive.  Let's say that others who have access to the shared drive can open the file from another computer, to save the changes to the file using their computer and even move the file to a different location in the same shared drive.  When I return to the properties of the file under 'Détails', sometimes 'owner' is still listed as "USERS/Person1" and sometimes he changed to someone else as "USERS/person2.

  I want to be able to search all the files I created showing the category of 'Owner' as a column in a window of browser windows and sorting so that all files of USERS/Person1 will appear together.  I can't be sure that I am looking for a complete list of the USERS/Person1 if there is a process that is reassign the owner without my knowledge.  I've experimented in opening a file that I know I created originally (which now showed "USERS/person2" as the "owner") and recording a change for her.  The name of the owner has not changed to USERS/person2.  I also know that the USERS/person2 does not manually go and change the permissions of file for that particular file attribute itself as the 'owner '.  I think it's a process making users who, unbeknownst to us, change the ownership of the file.  Yes - What causes a modification that is designated as the "owner" in the properties of the file?

  I actually thought about it myself...

  Files are sometimes the owner of the owner of the FOLDER.  So just create a new folder of computer USERS/Person1, move all the files in the old folder that has been created/corrupted to show the USERS/person2 as owner, and then the new folder with all the old files now in it will show USERS/Act.1 as the owner under file properties.  Keeps all the date created, modified files, other information properties the same (except for the new folder, of course, that has a new date of creation).  Thus, it keeps all the other info, but puts the appropriate property so you can finally pick up in person!

  Not a complete solution.  And still no response as to what process actually happen in the first place...  But at least now I can easily fix a set of files very quickly (without making attempts to open each file, make a change, re-register and then have even not reflect the new owner because the control record had the wrong user listed).
  Boo - Yes!

• Save the changes to and sharing the edited in LR jpg (no raw file)

  Hello! It is a struggle of snapper photo smartphone every day:

  
  

  Workflow: I took some photos with an iPhone (jpg) > > unloaded on my folder on a Mac structure > > added to my LR catalog > > developed their (culture, contrast changed etc.) > > I saved the file metadata.

  Problem: now, I would like to send pictures published as an attachment or open it in another client that is upload Photos of Google, but the jpg files seem to be intact. (I understand I should be working in the raw files where LR can save additional files with changes or I could export to jpg, but I don't always wear a good camera with me). Please can help you?

  Thank you!

  A.

  Hi amold.

  After working on the images in Lightroom, you need to export them anywhere on the system, so that you can see the changes you have performed on the images.

  Once you export you can download or send by e-mail or can be clouds.

  Kind regards

  ! Mohit

• Flash as2 cross subject to access the SWF from another server domain

  I have question cross-domain, how do I access the .swf from another swf file without using System.Security.allowDomain() in the swf file, which we are called.

  I use 2 domains and I have 2 files swf is a.com (a.swf) and another is of bcom (b.swf) I want to access the file the a.swf b.swf frames, if I use the system.Security.allowDomain() in b.swf file I can access executives. But without using this way I can access the file from another domain.

  Because I have a risk to change the file b.swf so I vant to go without changing the file b.swf is any other wey to access frames of the file the file a.swf b.swf. Please someone help me solve this problem.

  use a local executable (such as php) to load the b.swf and send it back to a.swf.  for example:

  loadSWF.php:

  <>

  $fh = fopen ("www.b.com/b.swf", "r");

  Header ("Content-type: application/x-shockwave-flash");

  fpassthru ($FH);

  ?>

  a.fla:

  var target_mc:MovieClip=this.createEmptyMovieClip("target_mc",this.getNextHighestDepth());

  target_mc.loadMovie ("loadSWF.php");

• F10 does not save the changes

  I bought a HP 500-023 refurb which was great good cheap at Microcenter.  I would like to enable vt - x, which is a feature of the i3 chip that is installed on this computer, and finally because the Commission will support the other processors I could switch to something that can run a virtual machine that is better outside the i3 chip that went into it.  So, every time I enter the bios and go to the screen that allows me to change the vt - x for 'licence' to 'disabled', that it is not possible to F10 any change.  In fact, it is no screen in the bios at all which allows F10 to save even though the bios says «F10 save/ESC exit»  I built several computers myself in the past and unlocked cores on the processors through the settings of the bios etc, so I am very familiar with the bios settings.  The question is, literally, that the changes cannot be saved.  If someone knows something about HP computers specifically which would explain this weird behavior in the menu of the bios Setup?  To say they have simply disabled the ability to make changes is a total deal breaker and will return just the machine to the store.

  OK as it turns out I have F10 CAN save the changes to the bios settings and activate the HP motherboard Joshua 500-023 device virtualization.  The problem was that I just changed the BIOS with my keyboard not HP.  It's a Microsoft Wireless ergonomic keyboard that I use always.  I would never in a million years try to use cheap plastic keyboard that came with the computer, but read on UEFI and how it detects hardware confidence that it crossed my mind that maybe I should just plug the supplied keyboard with the computer.  YES... that's all it took.  I could then F10 and save changes to the bios.

• How to simulate the change of sim card

  Hi friends

  I want to simulate the functionality of changing the sim. If I'm erasing all data on mobile, then I lost all data. Is there a solution to implement the scenario of change of sim card.

  You can simulate the change of SIM card on Simulator-

  Steps for BB JDE-

  
  

  1.) go to the Menu bar - > edit-> preferences

  The Simulator 2 tab.) -> Network tab->

  # ICCID (GPRS) / ICCID override (GPRS)
  

  # IMSI (GPRS) / IMSI override (GPRS).

  Enter here any value in the format - www.xxx.yyyy.zzzz (e.g. 5600.5478.02145.121)

  3.) click apply. Close.

  4.) now when you run the Simulator, it generates a warning.

  Given IMSI (5600.5478.02145.121) is longer than the maximum length (15).

            Click on continue.

  Steps for Eclipse-

  1.) select your project in the Package Explorer-> right click-> Debug as ->Debug Configurations ->

  2.) select DebugServer from the left pane of the window.

  (3.) the right side of the pane, there are four tabs-> go to the Simulator.

  4.) be that cannot change default Simulator, if we are to make a new profile.

  5.) don't forget the new profile is selected. Now, select network tab.

  6.) steps 2, 3 & 4 above.

  
  

  Now, it will give u a simulation of change of default SIM card IMSI value is 666666.01.234567.8

  Thank you

  Kanak Sony
  

• How can I programically change the background color of a VI using another VI?

  Is it possible to change the background color of text of an indicator on the front of an a different VI VI?

  Hello

  You can programmatically change the front like that, code

  Can I programmatically change the colour of the façade?

  http://digital.NI.com/public.nsf/allkb/0DDBDB2FE2F54A5286256918006D7BB9?OpenDocument

  Then using VI Server, you can get a reference to VI on another computer to change it (or on the same machine)

  Hope this helps,

• I do not see any "catalog items" when even I'm administrator of fabric, if I change this to another user I can request the items from the catalogue, please!

  

  If I change this "in the name of' another user 'Kumar' I can't go to the components of the application

  In order to see the items in the catalog, you have a right as well...

  This also requires you to be a part of a group of companies...

  1. Add your user name to a group of companies (in any role, Manager / user / support)

  2. create a payment for this group of business if you don't already, a game and you qualify the items in the catalog.

  3. If you have a right, simply add the user to the right.