A lot of memory used after the repair Installation of Windows XP

Similar Questions

• Error loading operating system message is displayed after the partial installation of Windows XP

  Hello all, I was doing a clean install of Windows XP from the CD on my desktop PC.  I had reached the point where I had deleted the existing system partition and created a new system partition and had begun to load data from system to system on the CD when I accidentally stop the surge protector, shutting off the power to the computer, the screen of the monitor, etc.  After that I restored power, I turned on the PC without the XP installation CD in the CD/DVD drive.  The system posted successfully and start the CD line appeared IMMEDIATELY followed by the message "error loading operating system" on a new line.  I tried to start with the installation of XP in the drive disc, as well as with the "Ultimate Boot CD" in the player - the "Error loading operating system" message appeared in both cases.  Thanks for any help you can provide!

  The desktop PC has had a full legal work Windows XP with SP3, but I chose to reinstall from scratch, because I had problems with corrupted data in the Zone Alarm and card ATI graphics card software that caused random outages, lead to situations of re - start.  I couldn't fix the files for these 2 applications that I had this desktop PC in stock for more than 18 months and I couldn't remember the administrator password I had used.

  Once more, these error messages tell me you dΘmarrez the hard disk and no CD-ROM drive.  The message "NTLDR is missing" is read the boot sector, on most of the installations of Windows, the boot sector is usually the absolute sector 63 on the disc, using DiskProbe you will see the text of the message to the given sector.

  Your drive is perhaps at fault... or it may be absolutely nothing wrong with it!  You may need to press a key to boot from the CD, often you see a message like «Press any key to boot from CD...» "or some thing in this sense, maybe you're not a touch and the BIOS ignores the boot from CD-ROM and goes to the next boot device (hard drive).

  John

• After the new installation of windows installation

  Hello

  My computer has receantly had virus problems and I want to do a new installation of windows.  After I do this can I reinstall my copy of creative suite and use the code provided to or he'll tell me its already in use since technically, I did use it once already?  If Yes is it possible around it?  I really don't want to drop $800 again just to reload windows on my computer.

  Thanks for any help!

  Disable your existing installation of Creative Suite for free activation.

  Open any application e.g. Photoshop then help > Deactivate. That will disable the entire suite.

  Reinstall Windows.

  Reinstall the Creative Suite and it reactivates during installation.

• Keyboard output incorrect characters after the re-installation of Windows Vista on Dell XPS M1530

  Original title: some of the keys on the keyboard messed up after re-installation of Windows Vista on Dell XPS M1530

  Hey guys,.

  I have recently reinstalled windows because last year I picked up a few errors that I couldn't fix it easily and I wanted a clean slate.

  I have install all the drivers etc, but I noticed on my keyboard, if I try and make a "sign it comes up with a sign @ and vice versa." There are also others like that, so I guess that my keyboard readers need to update? Although I have no idea why they would need updating as they were before.

  Anyway, I went here: http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=19&l=en&s=dhs&ServiceTag=&SystemID=XPS_M1530&os=WLH&osl=en&catid=&impid= and I tried to find the driver I need, but could not find them.

  So, overall, my question is should I update the drivers? If so, how?

  And if not, how can I fix?

  Thank you. :)

  Hi cripple.

  Thank you for your message.

  Was is happening until you have reinstalled Windows?

  How do you reinstall Vista, what steps did you take?

  What is a wireless keyboard?

  If this is the case, check the batteries and make sure that the keyboard is very close to the receiver (a few inches) to see if the problem resolves.

  I suggest updating your anti-virus definitions and run a fun system scan.

  You can connect another keyboard to your computer to see if it might be the fault of the keyboard?

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Speaker PC under 'Tab speakers properties-levels' option are gone after the new installation of windows 7 Professional.

  2 days ago, I did a clean installation of Windows 7 Professional x 64 on my laptop Packard Bell EasyNote TX86. Since then my laptop makes a beep every time I plug / unplug the power supply.

  Before the fresh install, I was able to disable the cut-off function of the PC "Tab speakers properties-levels" speaker sound but now the PC speaker settings are no longer there (I tried disabling it in the BIOS but no option is also available). What can I do to turn off the beeps?

  I found the problem.

  Audio drivers that installs with windows 7 was incorrect. I downloaded the audio drivers from Packard Bell site, after their installation parameters PC speaker were back and I was able to disable the PC speaker.

• Satellite A500 - Toshiba tools after the new installation of Windows 7

  Hi I was wondering if my applications which have been pre installed on my Toshiba Satellite A500 would transfer through on a custom Windows 7 Setup.

  I did an upgrade from Vista Home Premium to Windows 7 Home Premium, but I want to do a full installation of Windows 7 because I believe that upgrade does not work as good as a full operating system installation.

  Hello

  I know, if you perform a complete installation, that everything will be wiped on local disk C:, and you have to reinstall all the drivers/application.

• Updates not working after the new installation of windows xp

  Recently I have formatted my hard drive and reinstalled windows xp. I can't get updates for some reason. I try to get the answer "the website has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem"can someone help me?

  Hello

  -Is a 64-bit or 32-bit computer?
  -What service pack have installed you on the computer?

  Is there an error with the error code.

  This issue is due to not having the latest version of windows update agent on your computer. So I would say you please install the latest version of windows update agent on your computer, and I am sure that this problem will be solved. Here is the link to download.

  How to get the latest version of the Windows Update Agent
  http://support.Microsoft.com/kb/949104

  Run the fix which will be offered to you when you open the page above.

  Once this is done, better also install you the latest windows installer to ensure that the windows service install is running.

  Install install 4.5, if you have XP SP2 or higher and install install 3.1 if you do not have a service pack or even if you have Service pack 1.

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=8483

  Windows Installer 3.1 Redistributable (v2)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=25

  
  You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update

  http://support.Microsoft.com/kb/883614

  You receive an error message "0x800A01AE" or a "0 x 080070570" error message when you try to connect to the Windows Update Web page or to the Microsoft Update Web page in Windows Server 2003 or Windows XP

  http://support.Microsoft.com/kb/910359

  I hope this information helps you!

• Cannot adjust the brightness of the screen after the new installation of Windows 7

  I have a Pavilion dv2945se notebook. I have completely updated the Nvidia geforce 7150 m drivers. My laptop came with Windows Vista Home Premium 64-bit, and I did a new install of Windows 7 Home Premium 64-bit. I can't adjust the brightness of the display. I narrowed down the problem to the generic PnP Monitor driver. How can I solve this problem?

  Edit: I mean "impossible to adjust the brightness of the display" that every time I go into power options and trying to use the cursor, Windows Explorer crashes. Also, my fn + F7 and F8 keys light work before I connect to windows, but not after. I think that something will charge when I connect to windows that is causing the problem. So I went in Mode safe, but then all that allows to control the brightness has not loaded when I went into safe mode, which was not helpful. I also went into MSConfig and disabled all startup programs, but again, I have the same problem. The brightness of the keys work before connect you to Windows, but not thereafter.

  When I turn off the device generic PnP monitor (1) can't adjust the brightness at all and (2) the Power Options window stops freezing. That's how I've narrowed the problem to the generic PnP Monitor driver.

  I finally solved this by uninstalling the driver for the ALPS touchpad. Because there are no Windows 7 drivers for my laptop even though it is listed in the models capable of upgrading to Windows 7, I used Windows Vista touchpad drivers. It was the cause of my problem with brightness adjustment. I don't know why it worked, but I've narrowed it down by disabling all processes start and then from their one at a time to see what caused the problem. As soon as I started Apoint.exe, I started to have problems.

  Now, I just have to find a way to disable the touchpad tapping without the ALPS drivers.

• HowTO: Toshiba HDD Recovery after the new installation of Windows 7

  If you install a new windows format or toshiba by a cd of windows you will not be able to see the Toshiba Hdd Recovery on F8 to restore the menu.

  Like this

  So if you have a recovery partition, you can make a recovery system to factory default. Follow these steps...

  1. format your USB key. Paste that file to a usb flash drive.

  2 - reboot the system and press F12 to start from usb...

  After these steps you can restore the system to factory default...

  Toshiba recovery steps

  Thanks for your interesting ad.
  I m very interested in how it works and will try to test it soon.

• Touchpad does not work after the new installation of windows 8.1

  Hi, I have a hp envy sleekbook m6 model. in any case since I installed windows 8.1 cool my touchpad works until a point. Ill install the driver and it works fine until I have shut down the laptop computer, then restart. IM pretty sure that the driver is updated automatically and does not properly. Any help would be greatly appreciated.

  My model: HP ENVY m6-k010dx

  Hello again loplop8989l,

  Thanks for the quick response!

  Since you are able to use your TouchPad before restarting your computer, I recommend that you follow this document on How to perform a boot in Windows. This should help

  If the problem persists, I suggest to restore your system to a restore point when you first install the drivers for your TouchPad. To do this, please follow this document on using Microsoft System Restore (Windows 8).

  Once you have restored your system to when the pilots first TouchPad installation, please follow this resource on how to activate the update or disable automatic so only with the help of HP Support Assistant (Windows 8). This should help to disable automatic updates and check to see what firmware to download individually. Please install each update individually, taking note of update causes incompatibility of software with your TouchPad.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• After the automatic installation of Windows updates, laptop computer stops unexpectedly

  After that I installed the automatic updates my laptop stops unexpectedly. No one knows why this happens?

  Hello

  · The updates have been installed on the computer?

  · What is the service pack installed?

  · You receive an error message or error code when the computer starts?

  You can follow the link below and get the exact error message or error code: Windows XP restarts unexpectedly or restarts when you shut down the computer: http://support.microsoft.com/kb/320299

  For reference: Advanced Troubleshooting for shutdown problems in Windows XP: http://support.microsoft.com/kb/308029

• Problem with Windows Update after the new installation of Windows 7 Pro the Lenovo ThinkPad X 200

  I'm trying to do a fresh install of Windows 7 Pro on a Lenovo ThinkPad X 200. The product key is easy to find on the sticker of the ThinkPad. However, the version of Windows is hidden (for example, I can't check that my ThinkPad had originally installed Windows 7 Pro). I was able to install by using a Pro Win 7 SP1 CD ROM I bought for another installation. I used the ThinkPad I was trying to make the new facility on the product key. I was able to activate the Windows 7 Pro using the phone call and my cell phone. I checked the activation! However, I have problems with Windows update. The product key may be a different version of Windows 7. If so, why did it install and activate OK? Y at - it a fix for this problem or I have to buy a new version of Windows 7 Pro? Please note that I have not yet installed all drivers Lenovo ThinkPad as I can't seem to install correctly. Thank you!

  Since the issue is updated to Windows, it is not a product number key.

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

• After the re-installation of Windows 7 I can is no longer on the desktop 1080 p resolution.

  I recently had a problem with my computer and had to reinstall windows 7. I have a dell inspiron n7110 with Intel hd 3000 and Nvidia GT 525 m graphics cards. I followed each of the steps in this article, 36bac084-c1ae-4702-951a-b34c92fc860e . All my drivers are up to date and I tried to do this several times. Before the original problem, I was able to get a screen resolution of 1920 x 1080. Now I'm unable to reach this resolution and the max that my screen will go is 1600 x 900. I tried to find solutions online and have failed. Please let me know if anyone has any ideas or if I should renew my warranty so I can send it back for repair.

  It is physically impossible for your billboard show this resolution - as above, you can have if that was the case, but it is not - and may never have.

• Acer 1810TZ webcam works only after the new installation of Windows 7

  My hard drive died so I don't have access to the recovery partition. I did a fresh install of Windows 7 on a new drive.  Everything works except the webcam.  Windows has recognized and installed the drivers (and works) but nothing can connect to it.  It was working before the accident (also W7).

  The Acer website says it is made by Chicony (is ID 0 c 45 6310 suggests Sonix) so I downloaded and installed the drivers installed and appropriate Acer Crystal Eye, but it crashes at startup without error message.  Skype and other applications cannot connect to the camera webcam.  I also tried all the other drivers on the Acer website, just in case.

  Comparability Windows Center suggests that the pilot was developed by Suyin that might be the problem.  I found some Sonix drivers that will install on the Microsoft ones but make no difference.  I tried to install and Crystal Eye running in compatibility mode.

  Any ideas how to solve this problem?  I am now at a total loss.

  Help much appreciated. Thank you.

  Hi Shalini

  Thanks for getting back to me.

  I am running 64 bit.

  Yes, the webcam is detected under as WebCam imaging devices.

  Drivers been uninstalled (reboot) and re-installed (reboot)

  Webcam programs have been removed (CrystalEye & Skype)

  I downloaded for a Chicony (WebCam_Chicony (AP) _1.1.95.71_Win7x86x64) drivers as Acer judged my Chicony camera Suyin not

  I heard support from Acer, who say that the problem is caused by a difference between OEM and sales at retail of Windows 7 and I need to re - install Windows from the recovery DVD.  I prefer not to do that.

  Thank you

  Nick

• Lack of video filter: AE. ADBE CF PRO 2.1 after the new installation of windows

  Hello

  I have recently installed windows 8 on a clean install on my main hard drive. now, when I opened my first projects (stored on the external drive), I get the error

  Lack of video filter: AE. ADBE CF PRO 2.1

  and when the project opens to all of the images is now: Media Offline

  desperately need help because I'm working on something that should be completed by Monday!

  Thank you

  KOB

  Finally! problem solved...

  It turns out that the CF was movie convert Pro

  and my images would not play because even if I had the DNXHD codec installed I also need quicktime installed!