A natural vocal sound

Similar Questions

• Speech sounds

  I'm still in the early stages of MainStage, but I was wondering if there is a way to assign a vocal sound to tell a battery?  For example, legacy, there are speech sounds that are different for each key as "Lets rock", "Redo" etc.  Is it possible to assign just a certain vocal sound (for example on c sharp) to a battery for trigger only that the sound?

  Thanks for any help on this...

  You can do it by building your own EXS instrument. It is not that difficult, it's just to create a slice with an EXS24, open the user interface, click the button Modify to open the Instrument Editor. Now do drag your vocal samples or sounds in the editor and adjust the main beaches. Everything is in the manual.

  If you have logic, you can put all your vocal samples on the audio track and convert this into a sampler instrument track.

  Best,

  DaCaptain

• General questions about the iphone compatible hearing aids, please?

  I am a seller of oil field that moves and I need my first hearing aids.  I have loss of hearing with a classic old guy and it's average but I'm late for h / a. I'm missing an important part of my life and want to hear the birds sing again!  I currently use a 5 s with 9.2 and a bluetooth Plantronics traveler legend.  I have hands free for safe driving and especially for taking notes of value and wear it all day.  I don't listen to music or videos, no vehicle bluetooth and any other iOS device.  The goal is good h/a and the use of good phone.

  I am interested in the Halo of Starkey and research scared me a bit of the questions that I barely understand!  Googling found a lot of comments, but they seem to all written by agents of sale or competitors.

  Where is the microphone bluetooth on the Halos?

  Is the call phone stereo or mono?

  The function of the hearing aid remains so that on the phone?

  In light of my basic needs, all warnings other than the stupid of these things cost?

  I am also considering a 6s, this would be a better phone for the Halo team?

  Prone glitch or awkward iphone apps?

  I'm bored of conversation in the meeting rooms, restaurants are tough and shows are terrible for the hearing?

  Generally you are happy with new h/a and halos in particular.

  Everything is provided with a newbie would not recognize that you like?

  Let me know if you need more details.

  Where is the microphone bluetooth on the Halos?

  --> The microphone's upstairs behind the part of the ear. If you use the Halos as your ears "on the phone", you still talk in the phone's microphone.

  Is the call phone stereo or mono?

  --> Is not true stereo, but you will hear the call through two hearing aids.

  The function of the hearing aid remains so that on the phone?

  --> You can leave the active hearing aid microphones or cut them. It's your choice.

  In light of my basic needs, all warnings other than the stupid of these things cost?

  --> Feel free to test-drive a few models, unless the first really works well for you.,.

  I am also considering a 6s, this would be a better phone for the Halo team?

  -->, I can't comment on that, except to say that my experience with multiple iPhones over the years that I have great confidence that each new model is better than the previous. There are a few bumps on the road, but Apple is good enough, solve them. YMMV

  Prone glitch or awkward iphone apps?

  --> Not, in my opinion.

  I'm bored of conversation in the meeting rooms, restaurants are tough and shows are terrible for the hearing?

  --> Which has not changed for me. It is the nature of sound amplification without being able to directly select that sounds to amplify and to mute.

  Generally you are happy with new h/a and halos in particular.

  -->, I am very happy.

  Everything is provided with a newbie would not recognize that you like?

  --> I like the ability to define a 'from' sensitive geographically, where you can control the volume up down and the bass/treble back. It is a crude tool, but it works.

• Persistent message "RGB setting is different.

  I have InDesign CS2, Japanese version (much of what I write will be translations of Japanese UI, so forgive me if it does not match the wording exactly English).

  A few weeks ago, I attended a series of specific measures required by a printing press, and now whenever I open any document, InDesign said, "this document RGB setting is different from the color setting for the application."  Curiously, however, what he says are the settings of the document and he said he would change them to match demand are identical.  And no matter whether if I chose to update the document to match the application or not and no matter how much time I save the document after this, the next time I open the document, it still gives the same complaint.

  A screenshot of the dialog is attached - I translate better than I can, but I hope that someone will be familiar with it in English anyway.  It is something like this:

  -What measures should be taken? -
  

  O do not fix the document

  Policy: preserve

  Profile: sRGB IEC61966 - 2.1

  Good O the document corresponding to the current setting of the color

  Policy: preserve

  Attribution of profile: sRGB IEC61966 - 2.1

  Content placed: preserve default assignment (other choices is 'Activate all profiles' and 'Disable all profiles'

  The steps, I think I took to printing management which contained the color were the following:

  1. Edit-> color setting: set best choices 'Use pre-press - Japan2' (the instructions say not explicitly)
     
  2. Edition-> box setting mix transparency-> CMYK document use
  3. Image-> Mode-> CMYK
  4. Make sure that all of my swatches are CMYK (I already knew that)

  I guess this problem probably has something to do with the first step, and I can't guarantee that I have not other changes not listed above.  Anyway, currently when I look at my color settings, "setting" serves 'pre-press - Japan2' and the 'Advanced Settings Mode' box is not checked.  The "Operating space" section lists the RGB setting as "Adobe RGB (1998)" and the CMYK setting as "Japan color 2001 coated.  In the section "Color management", RGB is to "Preserve the buried profile" (I have no idea what that means - the other choices are 'Off' and 'Change to operating space'), CMYK is "Preserve Number (ignore Linked profile)" and it has a symbol to lock to the left of it - when I hover over the selection, the following notes say "when the document is opened, the CMYK profile is preserved. When content CMYK is placed, by default profile will be ignored, but object by object, you can choose to replace the profile (select object-> Image color setting).  With this parameter, you can also change for re-use proofing or document by checking the CMYK profiles are different. "(Sorry, that last sentence loses me - Japanese isn't my native language).  All the boxes in the color management section are checked.  I will attach a screenshot of the dialog, too.

  I have really no idea what most of this stuff done, but rather that nature 'locked' sounds setting CMYK related to opening a document, the complaint deals with RGB, CMYK not.  I recall that a few times as well a question on the RGB setting and a question on the CMYK setting is here (two dialogs one after the other), but in these cases the CMYK, we had the same mysterious problem than the current setup and adjustment that he would change the document were the same ("Japan color 2001 coated" if I remember correctly).  I didn't get that one lately (coincidence? solved?), but every time I get one of RGB.  Any idea what's going on?

  I think the "incompatibility" is really the policy, not the profile itself. Unless you change your default settings to match the document, you may not be able to get rid of him.

  I might try this on a copy of the file and see if it works: Edit > assign profile... and choose "Discard (use of the current workspace)." Say OK, then run the command again assign profiles and this time, choose the "current workspace award." As far as I know this should affect only the ID document, unrelated content. This assumes, of course, that current workspaces are correct.

  Peter

• BlackBerry Smartphones BBM video, BlackBerry Natural Sound, Paratek antenna, universal search for the PRIV?

  Someone to confirm if the priv get bbm video in the future. Since BB10 is phased out in 3-4 years maximum.

  There Paratek antenna, its natural, universal search?

  Hi @valer466

  • Paratek = Yes
  • Natural Sound = Yes
  • Universal Search = Yes (search for device<-- it's="">
  • Video of BBM = No., but your comments were shared with the BBM team

  BlackBerry has said nothing on gradually BB10 either so lets avoid speculating

  I hope this helps

• No sound when the track is of a nature

  Hey yall question,

  I use first adobe 7 Pro and audio problem.

  I have an audio track that I'm must by x 15, the sound works properly in the preview but when I export the audio scroll does not play, what is even more strange, it is that certain parts of the track that is not transferred quickly play fine in the export. Is this all simply not possible to export the audio slider or I do something wrong? Just to add more information, the audio track is selected and I have another audio track playing on the 2nd channel above the sound character

  Thanks, I ended up saving only audio track projects through the preview and replaced it

• Sound-absorbing SPACEBAR natural 4000 keyboard

  Y at - it an easy solution for the pavers noise created with the space bar is pressed completely which will not void the warranty?  I was hoping that authorized repair center had an authorized Microsoft fix, as a piece of tape or thin foam rubber with adhesive that can be inserted on the area of the key tube on.  A solution like this would make this absolutely exceptional keyboard for me and those around me who didn't hear this noise all day.  Thank you in advance for taking the time to help me with that.

  I don't think it's defective, I have a brand new and other people on amazon complained.  The space on the 7000 bar do not do, but the wireless is a failure.

  Here is a link of 3 pages about people complaining about the SPACEBAR:
  http://www.Amazon.com/review/R2DZAOUO7NSB5K/ref=cm_cr_pr_viewpnt#R2DZAOUO7NSB5K
  Looks like you have to hit it in the middle.  I'd pay $20 more for this keyboard SPACEBAR worked better.

• No sound when using a headset? 7 7 iPhone

  I've recently set to upgrade to an iPhone 7 latest updates installed and have clearly wonderful audio using speaker phones, but as soon as the headphones are plugged, theres little or nothing then vanish its pointless. The headphone volume is at full throttle and phone recognizes they are there, and today he said could be a problem in my iTunes account - where are the settings in iTunes to study and does anyone know a way to fix the inaudible? Help greatly appreciated!

  Hello and welcome to Apple support communities, Iarns82.

  If I understand your message to the right, when you use headphones with your new iPhone 7, there is no sound or the sound is very low. I use headphones with my own iPhone almost everyday, so I can certainly understand how it is important to get the best possible sound for the steps. I'm very happy to help you with this.

  The first thing that I recommend you do is try the sound with another pair of headphones. This will help determine if there is a problem with your headphones, or if the problem is with the iPhone itself. If the same sound problem occurs with a second pair of headphones, let's check some settings of your phone:
  

  1. Open your application settings.
  2. Select music.
  3. Enable the control of sound. When activated, your iPhone will detect when you play naturally music has low volumes and he will adjust accordingly.
  4. Check if the Volume limit is on. If this is the case, drag completely to the right to turn it off.

  Then, test your sound using your headset. If the problem persists, follow the steps If your headphones do not work with your iPhone, iPad, or iPod touch, specifically, this section:

  Look for debris, damage or loose connections

  1. Look for debris in making headphones for your iPhone, iPad or iPod touch.
  2. Check your cable to earphone, connector, remote control and headphones for the damage such as wear or breakage.
  3. Search for debris on STS on each earpiece. To remove debris, gently brush all openings with a small brush bristle that is clean and dry.
  4. Firmly plug your headphones in. If your iOS device has a case, remove the case to get a good contact.

  After you have gone through these steps, test again your helmet.

  Thank you for using communities of Apple Support.

  Take care.

• Sound of cave with voice recording

  Hi I am a singer, to have a microphone for Blu. When I record vocals on Garageband looks like I'm in a large room. One way to reduce this sound "cave"? Have made all settings mic I can I think. Thank you, Mimi

  Have you checked on the Master track effects? A patch that were selected in the library for your Master track?

• Tecra 8100 - no sound except in mic!

  I have a Tecra 8100 Windows XP.

  I can't get sound on the speakers or the headphones emitted by the computer, such as beeps, CD, etc. But if I have to reactivate the microphone, I can hear through the headset, ensure that the microphone picks up (there are a few comments without microphones, proving that the speakers work physically). All volume controls are the maximum and reactivated. All devices are enabled and correctly selected in sound control panels.

  Any help would be welcome! Is the sound card, or am I missing a driver? Could not find anything else on the web with similar symptoms. Thanks in advance.

  Here is the summary of the Everest report:

  Value of the field
  Computer
  Type of computer Advanced Configuration and Power Interface (ACPI) PC (Mobile)
  Microsoft Windows XP Professional operating system
  Operating system Service Pack [TRIAL VERSION]
  Internet Explorer 6.0.2600.0000 (IE 6.0 - Windows XP)
  DirectX 4.08.01.0810 (DirectX 8.1)
  Computer name TECRA-8100 (Tecra 8100)
  User name of the user General information
  Connection domain [TRIAL VERSION]
  Date / time 2009-07-15 / 14:18

  Motherboard
  Type of processor Mobile Intel Pentium III, 500 MHz (5 x 100)
  Name of TOSHIBA Portable PC motherboard
  Motherboard Chipset Intel 82440BX/ZX
  Memory system [TRIAL VERSION]
  Type of BIOS Toshiba (12/30/99)
  Communication communication Port (COM1) port
  Communication Port (LPT1) ECP Printer Port

  Display
  Video card S3 Graphics Inc., SavageMX (8 MB)
  Video card S3 Graphics Inc., SavageMX (8 MB)
  S3 Savage/MX (86 270) 3D accelerator
  Generic TV monitor
  Inner cover of Toshiba monitor 1024 x 768

  Multimedia
  Yamaha Native DS1 Audio CODEC audio adapter

  Storage
  Controller IDE Intel(r) 82371AB/EB PCI Bus Master IDE Controller
  Floppy Drive floppy disk drive
  Hard drive IBM-DARA-212000 (11 GB, 4200 RPM, Ultra-ATA/66)
  Optical drive TOSHIBA DVD - ROM SD-C2402 (8 x / 24 x DVD-ROM)
  Hard disks SMART Status OK

  Partitions
  C: (NTFS) [TRIAL VERSION]
  Total size [TRIAL VERSION]

  Entry
  Keyboard Standard 101/102-key or Microsoft Natural PS/2 keyboard
  Mouse HID-compliant mouse
  Mouse PS/2 Compatible Mouse

  Network
  IP main [TRIAL VERSION]
  00-10-A4-E1-F9-30 main MAC address
  Network card Xircom CardBus Ethernet II 10/100
  Modem TOSHIBA Internal V.90 Modem

  Devices
  Epson ActionLaser 1100 printer
  HP DeskJet 540 printer
  Infrared controller Infrared Port
  USB1 controller Intel 82371AB/EB PIIX4 - USB host controller
  USB device USB Human Interface Device
  Battery Microsoft AC adapt
  Battery Microsoft ACPI battery compatible control method
  Battery Microsoft ACPI battery compatible control method

  DMI
  Provider DMI BIOS TOSHIBA
  DMI BIOS Version Version 2.30
  TOSHIBA DMI system manufacturer
  DMI system product laptop
  DMI system Version Version 1.0
  DMI serial number of the system [TRIAL VERSION]
  DMI Motherboard manufacturer TOSHIBA
  DMI Motherboard product laptop
  DMI Motherboard Version Version A0
  DMI serial number motherboard [TRIAL VERSION]
  TOSHIBA DMI chassis manufacturer
  DMI chassis Version Version 1.0
  DMI serial number of chassis [TRIAL VERSION]
  DMI chassis [TRIAL VERSION] inventory number
  DMI chassis Type Notebook
  Total memory / free DMI casings 2 / 0

  Hello

  A good questions and I never heard of this topic which s...

  I think the fist, you should start to update the audio driver of your laptop. Therefore, you can see the Toshiba site for an update:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Before installing the latest version, you must remove the old version first and reboot the laptop.

  Maybe a reinstall of Windows with the Toshiba recovery disc could also be useful and in the worst case, it s only a hardware malfunction and it must swap the motherboard. :(

  Welcome them

• Satellite A30: Software Dragon Naturally Speaking speech recognition does not work!

  I am unable to get the speech recognition program 7.3 Preffered Dragon Naturally Speaking version to operate successfully on my laptop Satellite A30 P4, using Windows XP as the operating system. It works fine on my PC of similar specs as the Satellite A30. Speech recognition is very poor indeed with the Toshiba laptop. He was sent to the seller twice, but the problem is still not resolved. I know that this Dragon program works fine on other laptops.

  He is also unable to play some of my CD.

  I would like to know if the portable technology is unable to operate with Dragon speech recognition, or is the problem with the A30 series or with my specific computer?

  What characteristic specifications are necessary for the performance of Dragon with success of the Toshiba A30? This microphone is necessary? How many and what types of RAM? An additional sound card can be inserted into the laptop to improve performance?

  Help, please! Anyone with experience with Dragon speech recognition? What could be the problem of CD?

  [Edited by: admin on 19 June 05 14:33]

  Hello

  It's specific software problem and it is not easy to tell what can be the problem. In my opinion, it may be that his card on this unit has no performance you want. Sorry but I have no other explanation.

  These problems can be solved simply by contacting the producer of software because they have much more experience in troubleshooting.

• HP EliteBook 8570p bad sound question

  Hello

  I have a problem with the sound through headphones. The sound of the headphones of this laptop is thin, spindly, without bass, as if it was sous-échantillonné to 8 kHz, 8-bit audio. In the videos, I hear just voice of the people, his music is very poor.

  There is nothing wrong with headphones, as I tried to listen to the same audio files on my smartphone with the same headphones plugged in and sound was normal. Also by the internal Laptop speakers seems to be ok.

  Things I've tried so far:

  1 update BIOS and audio with the latest drivers. -No change.

  2. completely remove IDT SRS Premium Sound with drivers and system restored to default Windows drivers. -No change.

  3. configure Windows sound properties in the Windows Control Panel. -No change.

  I use Windows 7 SP1 64 - bit Enterprise Edition.

  I had this same problem with a 8570 executed on an advanced docking station p. I have updated my drivers audio, makeshift with settings, etc.. If I plugged my headphones into the audio output jack on the docking station (where my speakers are normally plugged), the sound was very good. But since the headphone jack, I got the same intestine dialogue, n-bass muffled and vocal-type problems you had. When I tried to configure the device audio speakers/HP on the plug headset, I was not getting stereo sound.

  As paradoxical as it may seem, to solve the problem, I had to pull the plug on my helmet just slightly out of the. Once the CAP has been implemented correctly, clearly, I had stereo sound. It seems a bit ridiculous, but it give a try.

  I am running Windows 7 Professional 64 - bit.

• Audio short film "Natural Selection" does not

  Hi there, I bought this short film called 'natural selection' from the iTunes store, a long time ago and it used to work fine, but recently, I updated my version of iTunes and I think that's when it must become broken, because the audio works for the first, perhaps, 20 seconds? Then, there is nothing. No sound whatsoever. I don't have this problem with all the other movies that I bought.

  I can't understand it and be there is also no feature of email to contact iTunes support (he was 1) call, call) 2 or 3) call) I hope someone here can answer this for me.

  Also, with my music, I don't find the repeat button. Everything exists, it's a sort of hype button. I'm not used to this most recent version of iTunes and they keep remove things or moving around and it's frustrating me. I just want to listen to a song to repeat, I can not understand where the button is, as where it used to be, are there not more.

  Thanks in advance

  It is on your iPad? Have you tried to delete the video and redownloading it (assuming it is still in the store) or he re-sync iTunes library on your computer (the copy you have on their works yet?)?

  For music, the track of reading should show at the bottom of the music app, press this to maximize the track, then below the track, there should be an icon repeat (which should scroll repeat them, repeat a track, off)-on the top to the left bottom arrow to minimize the track and return to the track selection screen

• Satellite U405D-S2852 - Webcam and sound level question

  Hi friends,

  Since then, I bought this laptop whenever I use the webcam.
  It doesn't show what it should!

  It displays as pinky, green as it should be set up brightness.
  I have configured many times and always!

  Sometimes it turns on and a few minutes later, he gives the natural color! Nice work! Then he returned to this problem!

  I put t know if I need to update the drivers, and don t know if it's something that is bad.
  I can't use my warranty that I m not the States.

  What can I please you friends?

  The other problem is that the sound on this laptop is so poor.
  It sounds if down, is there a way to increase the volume?

  Thanks and please reply.

  How to use webcam? Skype? MSN?

• Problem of sound with BDV-E770W

  Having a problem playing DVD movies on my new home theater. Trailers, scenes cut, etc. work fine, but in the actual movies the vocal track is muffled and distant. Other DVD, for example the TV series, seems to work well. All other inputs (TV, etc.) work fine.

  Sound mode set to auto.

  Everyone experienced it / have a solution?

  Problem resolved - after call to Sony technical support - re-run auto-calibration and it showed the center speaker connection was bad. I guess that TV DVDs are recorded in stereo (tracks so vocal still audible) but the movies are 5.1 and song come through from the center speaker.

  We learn something new every day!