a page from loading at startup, which is not the home page of Firefox

Similar Questions

• I can connect to wifi everywhere, but at my house from Beach-Iphone 5 s - is not the wifi because I am about this with other devices

  I can connect to wifi everywhere, but at my house from Beach-Iphone 5 s - is not the wifi because I am about this with other devices

  General suggestions for Wi - Fi problems, maybe one of them will help you... especially #4.

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (4) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (5) disable the prioritization of device on the router if this feature is available.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) to restore the device (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

• I can't install or uninstall anything. It telling me that my computer is in safe mode (which is not the case) or my windows installer is not installed properly.

  The Windows Installer

  I have windows xp. I can't install or uninstall anything. It telling me that my computer is in safe mode (which is not the case) or my windows installer is not installed properly. I know that my Installer is 'stopped '. I tried all the steps on the Microsoft technical support. As well as other sites in an attempt to solve this problem. I tried to subscribe, unsubscribe, launches the present, which, in respect of the CDM, run something HIKEY... all, you name it. I tried to download the latest installer, that didn't work... What the devil is left to try?

  Hello

  -What you have done to try to solve the problem?
  -Did you change on your computer due to which the question has begun?

  I recommend you follow the steps in this article and see if the problem still occurs.

  How to solve the problems when you install or uninstall programs on a Windows computer.

• How (really) to stop the tabs from loading at startup until the user clicks.

  I googled. I have read so many answers and tried them all.

  Browser.sessionstore.Restore *.
  Browser.Tabs.Load *.

  None of the related responses actually prevents firefox from loading tabs (home | homepage |) Home page) at startup.

  Then please. As I was five, and in order to preserve for posterity, someone explain how to stop firefox from loading tabs of the homepage automatically at startup. I want to load them when I click on it, or if I close the tab, for not otherwise materially affect the time of start/loan.

  I'm going to mark as resolved to close, but really, I guess I decided it is insoluble. The answer to "How to stop tabs on the home page of loading in the background" is really "why would you do that?

  Mainly, I want to do because I use extra home pages and reminders "view" soon If I bookmark something that he is likely to be forgotten and lost, whereas if I at least see the tab every time I start firefox, I'll deal with it later. I'll have to change this behavior, though, I suppose.

  Browser.sessionstore*-

  My understanding of these parameters after having read the other questions, it's that they don't affect the loading, which were finally open family home page and will be reopened on a new start tabs only if you have firefox set to operate in this way. (Which I did not - if I close a session with 9 tabs, they went and the next start will generate just my home page tabs).

  john99, I appreciate your time and your help.

• Anyone know why I can't buy the Portugal LR6? When I select the desktop application of most place hiden in the site Web of the page turns out to be empty! Other areas which is not the case, but since I am connected to the Portugal I'm not able to purchase

  Anyone know why I can't buy the Portugal LR6? When I select the desktop application of most place hiden in the site Web of the page turns out to be empty! In other regions that is not the case but since I am connected to the Portugal, I'm not able to buy elsewhere.

  Please check the availability of https://www.adobe.com/content/dam/Adobe/en/products/creativecloud/cc/pdfs/cc-availability-matrix.pdf

  Concerning

  Stéphane

• I want to know when 27.0 Firefox which is not the beta version will be reported under Windows.

  I know that Firefix beta was released for Windows on last week.
  So in the futere, the beta version of Firefox will be just Firefox. Do you understand not on my saying? I apologise for my poor skill making grammer. But I would like to know the date on which the Firefox 27.0 is officially launched. Thanks for listening. I'll wait for your answer.

  27 Firefox is scheduled to receive a State diploma of the "beta" test for the 'liberation' status 4 February 2014. Based on this page: https://wiki.mozilla.org/Releases

• How can I stop HP Support Assistant from loading at startup?

  I have a Pavilion dvt6 running Win7 (x 64). Whenever I start my computer, the HP Support Assistant appears in the lower left of the screen. While I'm not interested in the uninstall wizard, I am not interested in having run every time that I start. I joined the service and disabled the HP Support Assistant, and I see the related .exe (hpsa_service.exe) file in my task as a process manager. Is there another process that I need to disable (or change) to close the wizard at startup, or a specific setting in the wizard for help I can to avoid any start-up start-up?

  Hey darkhorse123 - I think I solved the problem! Window Wizard of decision-making support for would leap me upward by a few minutes after I started. My first thought was that it was because the Support Assistant was configured as a delayed start service, but no luck. However, today, after doing more research on the file, I came across a post at random - nothing to do with HP - but that seems to have targeted the cause - the Task Scheduler.

  I checked my task scheduler and noticed that the HP Support Assistant Quick Start task has been configured to run three minutes after I booted the laptop. Coincidence with the pop-up calendar? Probably not! I changed the setting that I hope it worked.

  To change the Task Scheduler settings, go to control panel > administrative tools > Task Scheduler. Open the items on the left (click on the arrow next to the Task Scheduler Library and the HP folder, and then click the folder Support Assistant). All tasks related to the Support Wizard should open on the top right of the screen. [If you do not see the triggers for each, click on each, then the trigger tab in the lower window]. Right-click on each that has a trigger, you want to change (including all tasks that start at startup...), and then click "Properties". Click on the tab 'Triggers' to the bottom of the tab is a button "Edit". Click on, and then change the setting to 'Begin task' all that is right for you. There is no "Never" setting, so if you just want to run the task manually, disable the button "Activate" at the bottom of the window.

  I'm guessing that disable the HP Support Assistant simply prevents to start his own - and apparently this isn't the wizard that opens the pop-up window is the Task Scheduler runs Quick Start, that's why we had so much trouble. I restarted my laptop twice now and no pop up window is the time! I'm cautiously optimistic...

  If this solution works for you. If so, I'll mark it resolved. Good luck - I'm pulling for you.

• Synchronization of music from iphone to itunes which are not bought or on the computer

  I know... crazy sounds...

  Okay, so I got a Dell with all the music stored on the hard drive. This includes songs that were not purchased via Itunes. Of course, he ends up dropping and the hard drive crashes. I decide to buy a Mac. When I connect my phone to Itunes, I can't do anything with the music on my phone that has not purchased. I don't have access to all of the music more. Is there anyway to transfer the music from my phone to itunes on mac if is not on the computer?

  There are a few programs listed to halfway to the bottom of this page that might be able to copy their return: recover your iTunes from your iPod or an iOS device

  And change to sync the phone for this computer: synchronization to a 'New' computer or replacing a hard drive "crashed"

• Remove the entry from "Uninstall a program" which does not exist anymore

  I have a few listed under "Uninstall" programs that are older, and I had deleted the files for. Is it possible to erase the list 'uninstall '? I just get that it can not find the uninstall log. Thanks for any help!

  Hello Lucas,.

  Thanks for posting your query in Microsoft Community.

  Please let us know if you have used programs and features to uninstall programs are no longer needed?

  This place is when the source of the program folder is removed first rather remove programs and features. I suggest you refer to the following he difficulty that automatically fix problems that are blocking the program installation or removal because of corrupted registry keys.

  The problems that the programs cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  I hope this helps. Please post back the results.

• create a form button which redirects to the home page

  I have a built form that submits correctly on the server and executes the script server.  I used a button to send the form.  Is it possible to place another button next to the button to send, but this new button would redirect the user to your homepage instead of doing whatever it is associated with the form?

  It seems that if the button is a button "submit", then it performs the action of the form.  I wish that the button again to not associate with the form, but rather simply redirect a link.  The only reason to use this new button's appearance because it is next to the submit button.

  I guess I could also use an image, but the generic text link look good next to the button.

  
  

  
  

  
      Go away
  
  
  

• How to check that the 64-bit version of ss12 is loaded on my computer (and not the 32 bit)?

  I got a new computer built for me.  I bought ss12 and asked them to load 64-bit on my new computer.

  I want to check that indeed, they loaded the 64 bit and not 32 bit.  I can't find an easy way to confirm what is loaded.  Even under 'on Adobe Premiere Elements"under the application Help menu, I don't see any reference to determine if this is the 32-bit or 64-bit that is responsible.

  Someone knows a way to check this please?

  It should be installed in C:\Program Files\Adobe, rather \Adobe C:\Program Files (86).

  [EDIT] In the Task Manager, the 32-bit processes have a * 32 after them:

  

  And the free utility Dependency Walker can make a difference: http://www.dependencywalker.com/

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

  If this post or by post from another user solves the original problem, please mark as correct and/or useful messages accordingly. This helps other users with similar trouble getting answers to their questions more quickly. Thank you.

• Using a new Contact field as the key (which is not the email address)

  Hello

  We must be able to store multiple records for each Contact with the same email address.

  Is it possible to 'change' the key to email to something else?

  More specifically, the key can be changed to a new "Unique_Id" I'll add as a new field of Contact?

  In some examples of c# code, I notice that it is possible to define the 'identifierFieldName' during the import of Contact definition, which sort of implies that areas other than the e-mail address could be used as a key.

  If it is possible to create a new primary key field, the attributes that he should have and how I declare that it is the key when you perform an import of contact?

  If it is not possible, I guess I'll create a separate custom object / data card with a number to 1 relationship with the Contact record.

  Thank you

  Chris

  Hi Chris,

  I am a PM to Eloqua. We are looking at ways that we can open a little more to the top of the contact table and remove the email address of contact as a unique key. Pieces of this feature are beginning to enter the place later this year. What we will do is remove the address of e-mail as a unique ID and using the system generated ID of contact. When you import, you specify which field you want to use as criteria for filtering.

  In the short term, if that makes sense, I would recommend using custom objects and linking those to the correct contact.

• private server & gmail works ok Yahoo and hotmail, not message of error = wrong password (which is not the case)

  -disabled Antivirus and tried again, problem not solved - tried to insert the username (without @yahoo or @hotmail after) thunderbird does not accept

  The program installation and Setup name@domain gmail works fine

  Yahoo and Hotmail - error, wrong password

  Go to https://account.microsoft.com/ which is where you can find security & privacy, not when you look at your Inbox.

• How to write the web address of a page that is not the home page

  Hi, this seems an obvious question, but he made me fight and I can't even to google the answer! I have a client who wants to print its web address on his business card. But he won't put the homepage, he wants to put the address of the page one another.

  For example if the address of his Web site is:

  www.hisdomainforexample.com

  .. .he wants to have something like:

  www.hisdomainforexample.com/ Mexican

  ... printed on his card. Is there a way to do this?

  I know that I can put www.hisdomainforexample.com/mexican.html but look messy. Am I missing something here?

  In the absence of a specific file name, servers look for a default file name.

  Index.htm usually works in all folders.

  Thus, you can place a file named index.htm in the Mexican case.

  Then, when the browser will ask the www.hisdomainforexample.com/mexicanserver, the server will deliver Mexican file index.htm.

• I am running Firefox 16.0.2 and you want to import the Favorites from IE 8... go through the process given to Firefox... but it only partially matter 'Favorites '.

  I am running Firefox 16.0.2 and IE 8 on my Windows 7 computer... I try to import the IE 8 'Favorites' in Firefox... I go through the procedure that Firefox has provided... but it is important ONLY part of my IE Favorites... it's only about 7 records with her subfolders where my save bookmarks are... I have a lot more than these folders (bookmarks)... any help?

  Hello

  You can try to export bookmarks to HTML in Internet Explorer, and then import the HTML file in Firefox by bookmarks (Alt + B) > show all bookmarks > import and export > import bookmarks in HTML....

  Import HTML

  Import bookmarks

  Import of