A problem with Speedgrade...

Similar Questions

• Problems with the Speedgrade color depth

  Hello everyone!

  As said in the title I have problems with the number of colors in Adobe Speedgrade.

  I would like to color - correct images my drone DJI using LUTs and, of course, build-in Speedgrade tools.

  Unfortunately, the use of the LUTs makes video appearance as there are not enough color-depth because you can see the bands in gradients (especially in the sky).

  I hope you can see the problem in the following screenshot.

  Scratches appear in Speedgrade preview, as well as in video rendering.

  So what can I do to avoid this scratches?

  Thank you in advance!

  Greetings

  Raphael

  

  I have not bought any of the first LUT game I bought... 4 years back, now. Wow, how time flies...

  Why?

  Because I had problems with excerpts from tapes and rarely found one I liked "such what ', so I got to work the clip after you apply the LUT as much as if I started from scratch. So why pay for the dang thing?

  I found it a good common sense many people in publishing & work of colorist, there is a certain tech LUT can really be able to use, but those who are mainly for the spendy 'pro' movie, Reds, Arris and other cameras. For a film DSLR & drone, making its own tends to work MUCH better.

  And it is easy within the Sg.

  Take this clip... watch your litters, first. Move the slider Temp for the position that balances the red & blue tops, cursor Magenta to balance the red & green tops... then left offset slider far a channel can be a little below '0', 0 to sentence above and one a little higher... then with keyboard and mouse or a simple trackball, move the color slider controls rather than wheels "unlock" the trio Offset, match the bottom just above 0, reset the summits if necessary and then return to wheels.

  Move the controls in Gamma Luma needed to feel 'brightness', and you have a a neutralized clip. Shouldn't take more than 20 seconds to do the above, if that.

  Now using color wheels, started working for a 'vision' and of course use secondary as necessary to adjust certain colors/colours/brightness and maybe go to controls Shadow & Highlight to get finer control of two Luma and chroma on the edges... in general, it is best to bring the ends of the scale to neutral even with a look hot or cold for most of the signal.

  Get something you like and can be used for a large number of your clips, save it as an eye. You can just quickly apply to any other work.

  You want to use in PrPro? Easy... with the right button on the Look to the Sg, choose 'Export', and you get to the options... except that say a Cube of however many points you want to and tell him where to save it. I found that with my GH3, sometimes with work in the open air with a sky bright-ish with the Sun around but just outside of an edge banding is quite possible... and 'hand-kitchen' these clips or using a Cube 64 - point is necessary.

  Neil

• Problem with my cc speedgrade since I updated my laptop for windows 10

  Hi, Pleas help me!

  I had a problem with my cc speedgrade, since I updated my laptop for windows 10. whenever I want to start speedgrade there is an error warning that tells me speedgrade does not work? did anyone else have this problem or someone has an idea to fix

  Best regards

  Jan

  Post edited by: Kevin Monahan

  Reason: The title was too long

  Hello

  I just solve my problem... Directory settings user removed from SpeedGrade and now everything is fine!

  C:\USER\xxx\AppData\Roaming\Adobe\SpeedGrade\9.0\

  Christian

• Problem with masks at sending back of Speedgrade first (CC)

  Hello

  I'm color ranking a clip in SpeedGrade CC using the new direct link function. For calibration of the colors I used masks and also the different layers. Once I'm done, I sent my sequence back to first Pro CC.

  I see, first shows me exactly the color correction, I did in SpeedGrade, except for one thing:
  The places where I used the masks in SpeedGrade to illuminate their for example a little until now are filled with lines pixeled...
  I thought it's just a problem with the preview, so I exported it. Slept pixeled lines.

  Once again: in SpeedGrade is all fine, but when I send the return sequence to the first there are those pixels.

  It's really irritating because one day before it worked fine with no problems and I was virtually the same as now.

  Please help me if you can! Thank you!

  I even posted in the Premiere Pro forum and got a good answer:
  http://forums.Adobe.com/message/5858747#5858747

• Problems with masks after the sequence first SpeedGrade back (CC)

  Hello

  I'm color ranking a clip in SpeedGrade CC using the new direct link function. For calibration of the colors I used masks and also the different layers. Once I'm done, I sent my sequence back to first Pro CC.

  I see, first shows me exactly the color correction, I did in SpeedGrade, except for one thing:
  The places where I used the masks in SpeedGrade to illuminate their for example a little until now are filled with lines pixeled...
  I thought it's just a problem with the preview, so I exported it. Slept pixeled lines.

  Once again: in SpeedGrade is all fine, but when I send the return sequence to the first there are those pixels.

  It's really irritating because one day before it worked fine with no problems and I was virtually the same as now.

  Please help me if you can! Thank you!

  Ok.

  The GPU acceleration is turned on?  Have you tried to turn it off?  You have a card AMD or nVidia?

• Problem of SpeedGrade and Red R3D

  I have a major problem with a red 5K (5120 x 2160) timeline. When I use the direct link to first CC Speedgrade support interface but the images never appears in the viewer of Speedgrade. (Just a scrambled mess, see photo)

  I had this experience after the upgrade to Yosemite. When I was on the Mavericks, everything worked fine with the same images.

  Please help me.

  / Robert

  

  Unfortunately your graphics card has enough VRAM to manipulate images of 5 K. You can change the engine reading Mercury to "Software" only when you use the Direct link, or reduce the size of your images below 5 K.

  Thank you

  Fran

• Several problems with Adobe Creative cloud app.

  I have several problems with the Adobe Creative Cloud application.

  1 CC Photoshop or prelude CC cross the bar of the 47% during installation. They constantly give me messages "Installation failed". When I click on "Learn more", I like that:

  "Installation failed."

  Errors during Installation. (7)

  More information"

  So, naturally, I click on more information to get the lifting against me following (which no do I understand):

  Exit Code: 7 Please see specific errors below for troubleshooting. For example,  ERROR:   -------------------------------------- Summary --------------------------------------  - 0 fatal error(s), 2 error(s)    ERROR: 12/01/13 13:16:06:425 | [INFO] |  | OOBE | DE |  |  |  | 6076 | ---------- CustomHook_Helperx64 ---- Start ----------  12/01/13 13:16:06:426 | [ERROR] |  | OOBE | DE |  |  |  | 6076 | Cannot load function name 'CSInstallerCustomHookProc' from library C:\Program Files (x86)\Common Files\Adobe\Installers\uninstall\{5F816B76-62F3-41C9-B651-27F49F25F50B}.data. Error 0    ERROR: System check returned with error : -4  ------------------------------------------------------------------------------------- 

  2. I installed 5 Lightroom, then uninstalled. When I went back to re - install, the application Adobe Creative cloud wouldn't let me. He says that my 5 Lightroom is "up-to-date" and that it is in my article 'Your applications', not in the section 'find new applications '. I rechecked my programs and features in Control Panel, and it isn't here. I cleaned my registry and it is still there. I deleted the file "opm.db" in my OOBE folder and restarted CC - still nothing.

  I must say, guys. I'm not very happy with the time I spent just trying to install programs on my PC. While the plan is for it to be intuitive at a certain time, it is not very functional at the moment. No matter how much help you can provide me would be amazing - if you can provide it sooner than later, I'd be on the moon.

  Thank you.

  Hope this will help others record the amount of time this error I spent troubleshooting.  When you install Adobe InCopy CC, CC of Adobe InDesign, Adobe Photoshop CC, CC prelude Adobe and Adobe first Pro CC on a laptop Windows Pro 8.1, I an error similar to the one below.  Other installations of Adobe Acrobat XI Pro, Adobe affect effects CC, Adobe Audition CC, Adobe Bridge CC, CC of Adobe Illustrator, Adobe Lightroom 5 and Adobe SpeedGrade CC installed without error.  I ran across this test with a clean operating system, new construction to help isolate the problem.

  23/12/13 16:33:04:372 | [INFO] |  | OOBE. OF |  |  |  | 912 | 23/12/13 16:33:03:368 | [ERROR] |  | OOBE. OF |  |  |  | 6316 | Cannot load the name "CSInstallerCustomHookProc" C:\Program Files (x 86) library function \Common Files\Adobe\Installers\uninstall\{5F816B76-62F3-41C9-B651-27F49F25F50B}.data. Error 0

  I ran a minimum load of the operating system by stopping all non Microsoft services by running MSCONFIG. EXE and disabling and disabling all startup in the Task Manager, Startup tab items.  After restarting the laptop, I was then able to install CC of Adobe Photoshop and Adobe first Pro CC.  However, Adobe InCopy CC, CC of Adobe InDesign and Adobe prelude always failed CC.  I needed to start safe mode and disable BitDefender Virus Shield and BitDefender Desktop Update Service and then restart mode Normal (services were always disabled). I continued and completed the installations of Adobe InCopy CC, CC of Adobe InDesign and Adobe prelude CC.

  It seems that BitDefender is the process to load this function as a virus Trojan markup and stop installation.

• problems with, phone, 6, Bluetooth kit, Nissan, after update, for, Rios, 1.0.2

  After the update to ios 10.0.2 - trying to use bluetooth to call my vehicle, it says: "this article is not in your phone book." How can I solve this problem?

  Greetings, joybelino1!

  Thank you for joining the communities Support from Apple! I can't wait to see that you are having problems with your Bluetooth in your car! The good news is that Apple has a great article that will help you with measures to try to resolve the problem. Read this article to gethelp to connect your iPhone, iPad, or iPod touch with your car radio. Even though he talks about problems with the connection, it also has the steps for other questions you may have once connected.
  
  

  If you use Bluetooth

  1. Consult the user manual of your car stereo to get the procedure to a Bluetooth device.
  2. On your iOS device, drag up to open Control Center, then press ontwice to turn on Bluetooth and turn it back on.
  3. Restart your iOS device.
  4. On your iOS device, Cancel the twinning of your car radio. On the screen of your car désapparier your iOS device and any other device. Restart your car and your iOS device, then pair and connect again.
  5. Update your iOS device.
  6. Install the updates to the firmware of your car radio.
  7. If you still not connect, contact Apple technical support.

  Have a great day!

• Anyone having problems with WiFi connectivity after upgrade to Sierra?

  I was wondering if anyone else knows issues with WiFi connectivity since the upgrade to Sierra 10.12? I have not had any problems with connectivity WiFi previously on El Capitan. Now I have regular randomly loose connectivity. My internet is cable and when it is connected I have a 100% connection. My details of iMac and I have used only 10% of my storage.

  

  No problem with my iphone 6.

  Hello AspDesigns,

  I understand that, since the upgrade to Mac OS Sierra, your Mac seems to have trouble staying connected to Wi - Fi. Fortunately the diagnosis built-in wireless can help identify the source of so much trouble.

  Search for Wi - Fi using your Mac problems

  See you soon!

• Problems with mail after switching to macOS Sierra

  Hey all

  After having recently upgraded to macOS Sierra, I am unable to read my mail.

  I get the following error every time I check on "Get Mail".

  There may be a problem with the mail server or the network. Check the account settings "*" or try again.

  The server returned the error: Mail could not connect to the server 'pop1.tribcsp.com' using SSL on the default ports. Verify that this server supports SSL and that your account settings are correct.

  What does this error message mean and how can I solve this problem.

  Thank you

  Hi Michael,

  I see your message that you get an error in the mail indicating that there is a problem with the mail server or the network.  To help get this problem resolved, I suggest that you follow the steps below:
  

  If mail refers to a problem with the mail server, or the network

  Mail will say that it is impossible to connect due to a problem with the mail server or the network. For example, the message may refer to a connection that has expired, or too many simultaneous connections:

  

  If you are connected to the Internet, but the connection has expired, your email provider might be affected by a discontinuance of service. Contact them or see their status Web page to ensure that their e-mail service is online. Examples of status pages:

  • iCloud mail status
  • Gmail status
  • Status of Yahoo mail
  • Status of the AOL mail
  • Status of Outlook e-mail

  If the message indicates the number of simultaneous connections, too many of your devices is check your e-mail account at the same time. Quit Mail on one or more of your other devices.

  If you are still unable to send or receive e-mails

  1. Make sure that you have installed latest version of the Mac software updates, especially if the problem occurred immediately after the installation of a previous update.
  2. In OS X El Capitan or later version, you can see a status icon and the short error message in the upper right of the Mail window, under the search box. The message may indicate 'Network offline' or 'Connection failed', for example. Click the message to see more details on the issue.
     
  3. Check your connection to the Mail connection doctor. It might be able to say more on the issue.

  If you cannot send or receive e-mail on your Mac.

  Take care.

• iMac 27 "mid-2011 - Intermittent problem with CPU fan running at full speed and sleep mode.

  Hello!

  My iMac 27 "has an intermittent problem with the CPU fan runs at full speed. Sometimes it happens at the time when I start it, sometimes only in my session, and sometimes only after a certain time. So does seem to be a problem of "heating".

  Second issue is with the mode 'sleep'. It may occur also at any time, at the start of the iMac, session, or after a certain time. But once he starts to go in mode 'sleep', when I wake up, it goes right back in mode after a few seconds and that it will continue indefinitely until I restart the computer.

  What could be?

  Please help me!

  4ntoine

  Here is my model of iMac:

  iMac 27 "mid-2011 model 12.2

  Intel Core i7 3.4 GHz

  AMD Radeon HD 6970M 1024 MB

  OS X El Capitan 10.11.6
  SMC 1.72f2

  Boot ROM IM121.0047.B23

  reset the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

• problem with playing the clash of clans

  I'm having some problems while playing the clash of clans on my 2 mini ipad screen does not seem to meet sometimes as if it was some sort of delay so I have to tap several times in order to use a filter or throw the troops on the battlefield.

  Hi Trinitygr,

  Thanks for posting in the Community Support from Apple! I understand that you are having problems with your iPad screen while playing a game. I like to play games on my iPad and I don't see how this could be a nuisance. I'm happy to offer assistance.

  Are you only had this problem when using the app clash of Clans, or does it happen in all applications? I recommend to start by following the steps described in this article:
  If an application you have installed unexpectedly closes, unresponsive, or does not open

  Take care!

• I'm having problems with an outdated Apple ID

  I have problems with updating Apps etc in my Apple account because he always asked an obsolete in sign.  How can I change this?

  Hello

  Go down to itunes apple ID Delete page homepage all ID and then add it back back.

  See you soon

  Brian

• Anyone having problems with the new iPhone LTE connection 7 on Verizon?

  I am now on my iPhone second 7 with Verizon. I had four phones for me and my family. I have now had issues where I have no signal in the same areas where my signal allows to be strong. I can't solve the problem with the activation/deactivation of the airplane and then mode again in normal mode. My phone will rest with no signal for 5 minutes, then going to LTE with three bars. I also had the problem where I had only 1 x signal, while my son standing right next to me has LTE. And he had the same questions, where I'm on LTE and it gets no signal. I use to have LTE where I live and work all the time, now it's spotty at best. Apple has replaced me and my sons iPhones but not luck. Still do. Any ideas or an any other suffering?

  (1) go to settings/cell phone/cellular data Options/enable LTE and select ONLY the DATA. This seems to solve the problem (as a temporary solution) for most of the people affected by this problem. The bad part is your request might not be as clear (since they cannot use the highest LTE signals) and you can make calls and data at the same time. But it does not solve the issue.

  (2) there are rumors (but you didn't hear that from me that we only are not supposed to discuss beta software program Apple in this forum) that the new version of Apple Beta for iOS (which also includes an update of the software carrier Verizon to 26.0) seems to solve this problem. So, there's a light at the end of the tunnel.

• Problem with some fonts of symbols after the installation of the Sierra

  Hello

  I have recently upgraded the OS on my iMac late 2012 for Sierra, since doing so, I noticed a problem with several fonts.

  All symbolic symbols Apple to Wingdings fonts not correctly displayed in the font book. Apple symbols looks like a standard wheelbase of san, and other symbolic fonts just show as question marks '?' where the images should be.

  In text editing, that I can't even see the symbolic fonts like Zapf Dingbats and Wingdings in the selector. However, they all work well in Adobe Illustrator (CS5) and Microsoft Word 2011. Apple symbols still looks like a standard font.

  I already tried the following:

  1. check the fonts in font book

  2 fix the duplicates in the font book

  3. using the "Restore Standard fonts" option in the font book

  4 deleting a file in the folder Preferences plist Fonts

  5 deleted the cache of police and the database

  I'm out of ideas. Has anyone else had the same problem found a fix?

  Kind regards

  Greville

  I'm just to add that I used the recovery partition to do a clean install of Sierra on a hard drive external and then booted into it to see if it had the same problem.

  And he does. Wingdings and other photo fonts appear as '?' in boxes where the letters must be in the font book.

  So this seems like a problem with the way Sierra displays these fonts, not with the font files themselves.