A problem with the lock 10 - Bug ios screen?

Similar Questions

• problem with the locking of the data

  Hi all
  
  I'm having a problem with the locking of the data.
  
  When I was trying to lock FY12 real periods. We cannot block periods. The consolidation runs perfect and all entities have the status of OK and all levels of the process are published, but when we try locking... We receive an error that "Consolidation, calculations or translations are required.
  
  Published by: user10926115 on October 16, 2012 10:34

  We had this problem with our application, as well. I don't know what causes it, but I can advise on our solution.

  In your grid lock, change your Value [None] member. Bear has the value and shows that all entities are in a State of OK or OK SC. However, when we go to the [none] member value, we see that some entities still need calculation. Select the groups that aren't in an OK OK SC or ND OK and select 'calculate '. Once solve us this problem in the [None] member value, we have no problems with locking or unlocking of these entities for periods that have been addressed.

  I would like to know if it works for you.

  Also, if someone else may be able to weigh in on the root of this problem, it would be certainly appreciated by more than just the op.

  Thank you!
  Scott

• Problem with the Honda CRV and IOS 9.3.1 Bluetooth

  I just bought an IPhone more than 6 s and connected to my Bluetooth CRV Honda's.  No issues yesterday, but today it is really strange.  When my phone connects with the Bluetooth car on car monitor, that he acts like he's trying to call my phone.  However on my phone it shows not everything what is happening.  It displays the button in the car to disconnect the monitor from the car, but none of the logout buttons work.  It is just like that on the monitor.  The only way to get this removed from the screen of the car is to cut the Bluetooth phone.  That defeats the purpose of having the connection car Bluetooth. Mathilde be an IOS 9.3.1 deliver it worked fine in my iPhone 6 and the prevoous IOS and it worked the first day of my connection!  How can I fix?

  Others with Honda CRV have reported similar problems recently and not solution

  See outside the forum here

  http://www.autoconnectedcar.com/2015/09/why-Bluetooth-iOS-9-issues-with-iPhones-4s55s5s6s-fewer-than-IOS-8-in-cars-but-could-cause-problems/

  http://www.gowildehonda.com/Honda-Bluetooth-how-to/2016-CRV.htm

• HP Photosmart 6520 and problems with the air IPAD using IOS 8.0.2

  Used APPLE IOS 7. No problem with printing to the 6520. Now, I've updated to version 8.0.2. now, to get a message on the IPAD, saying: 'no printer not found '. No printing from laptop to printer and no problem shows on laptop as the printer selected in the folder devices and printers. Y at - it an update of software of HP to run version 8.0.2. .

  JERENDS, thanks for your response. I had already tried the "hard restart" at the suggestion of the Apple Tech Help, but that doesn't seem to help. But late last night after posting my question Imtried print again and IPAD are my printer without problem. Why he couldn't find yesterday morning but has been able to find it later in the day is one of the mysteries of life, I guess.

• problem with the locking insert and delete between two linked tables help please.

  Hi guys I have a problem with a table of locking in Oracle forms, but when I try in SQL happens here too many users. I was wondering if anyone can shed some light on this?
  
  I created two scenerios one that works and is not based on the primary key and foreign key constraints (but one that works is not possible for us because it would mean change design table that we can not do).
  
  I've hardcoded in 1127,1128 number to make it easier (in reality it is a sequence)
  
  OK scenerio one (our scenerio)
  
  two tables
  

   CREATE TABLE testSFLABPR 
     (     LABP_REF_IRN VARCHAR2(25 BYTE), 
       LABP_REF_REF VARCHAR2(30 BYTE), 
       LABP_REF_SL NUMBER(8,0), 
       LABP_CONFIG_ID NUMBER(8,0),
        CONSTRAINT PK_testLABPR_IRN_SL PRIMARY KEY (LABP_REF_IRN,LABP_REF_SL)
     ) ;
  
   CREATE TABLE testSFLABP 
     (     LABP_IRN VARCHAR2(25 BYTE), 
       LABP_OPNO NUMBER(3,0), 
       labp_no NUMBER(8,0),
        CONSTRAINT PK_testSFLABP PRIMARY KEY (LABP_IRN, LABP_OPNO, LABP_NO) ENABLE, 
        CONSTRAINT testFK_SFLABP_SFLABPR FOREIGN KEY (LABP_IRN,labp_no)
         REFERENCES TESTSFLABPR (LABP_REF_IRN,LABP_REF_SL) ENABLE
     ) ;

  OK now session is done the following
  

  DELETE FROM      testSFLABPR     WHERE   LABP_CONFIG_ID            = 1127;          
                 
  INSERT INTO testSFLABPR(
          LABP_REF_IRN,
          LABP_REF_SL,
          LABP_REF_REF,
          LABP_CONFIG_ID
          )
          VALUES
          (
          'SOPENSHELVING',
          1127,
          1127||'CF Route',
          1127
          );
          
  INSERT INTO testSFLABP
        (
        LABP_IRN,
        LABP_OPNO,
        LABP_NO)
  VALUES (
  'SOPENSHELVING',
  1,
  1127);

  session one remains in this State.
  
  second session now does the following

  DELETE     FROM testSFLABPR     WHERE   LABP_CONFIG_ID            = 1128;     

  second session is now locked until a commit or rollback occurs.
  
  If I run the exact scenerio even with only a primary key on the table without locks held
  

   CREATE TABLE testSFLABPR 
     (     LABP_REF_IRN VARCHAR2(25 BYTE), 
       LABP_REF_REF VARCHAR2(30 BYTE), 
       LABP_CONFIG_ID NUMBER(8,0),
        CONSTRAINT PK_testLABPR_IRN_SL PRIMARY KEY (LABP_REF_IRN)
     ) ;
  
   CREATE TABLE testSFLABP 
     (     LABP_IRN VARCHAR2(25 BYTE), 
       LABP_OPNO NUMBER(3,0), 
       labp_no NUMBER(8,0),
        CONSTRAINT PK_testSFLABP PRIMARY KEY (LABP_IRN, LABP_OPNO, LABP_NO) ENABLE, 
        CONSTRAINT testFK_SFLABP_SFLABPR FOREIGN KEY (LABP_IRN)
         REFERENCES TESTSFLABPR (LABP_REF_IRN) ENABLE
     ) ;

  INSERT INTO testSFLABPR(
          LABP_REF_IRN,
          LABP_REF_REF,
          LABP_CONFIG_ID
          )
          VALUES
          (
          'SOPENSHELVING',
          1127||'CF Route',
          1127
          );
          
  INSERT INTO testSFLABP
        (
        LABP_IRN,
        LABP_OPNO,
        LABP_NO)
  VALUES (
  'SOPENSHELVING',
  1,
  1127);

  DELETE     FROM testSFLABPR     WHERE   LABP_CONFIG_ID            = 1128;

  I hope I posted all the information that is relevant... version of DB were is Oracle Database 10g Release 10.2.0.3.0 - Production
  
  Any help is appreciated...

  Creating indexes on columns of the FK. Something like:

  CREATE INDEX testFK_SFLABP_SFLABPR_IDX
  ON testSFLABP(LABP_IRN,labp_no)
  /
  

  SY.

• problem with the lock on the xperia neo screen

  How the lock screen is looking? for my neo when I press the release button it unlocks just she dislikes in the Go when I need to slide on the screen... is this normal? I saw a few screens of xperia pro and the device of the slide to unlock screen is still there...

  Can you please go to the following and advises that it is selected.

  Menu > settings > Security > lock screen

• anyone having problems with the shared objects in iOS?

  I have a program that uses shared objects to keep track of the level information. It works well in android, but it stopped working in the iOS. He used to work in the iOS I think. What could happen? My shared object is always undefined in iOS

  -Scott

  Hi Scott,.

  It seems that you explicitly 'flush' data in the SharedObject instance on iOS, see about similar:

  http://forums.Adobe.com/message/3731055

  Try the linked thread implementation details and post if it works,

  HTH,

  Kind regards

  Peter

• Problem with the home after Orange update screens

  I installed the new update of orange yesterday and I noticed that the widgets and other objects on all the home EXCEPT the Center/main screens once empty disappear when I switch from the normal portrait in landscape mode by opening the key board. If I have my finger on the screen would then move either left or right of the Center home screen and all reappears and seems to be back to normal. Until I got close the key board, then it happens again. I tried to restart and it has not made a difference.

  On the plus side, I noticed that the battery life has improved considerably.

  try to delete the icons on your home screen, reboot the phone, and then put back them again.

• Bluetooth connection problems with the recent update of IOS

  I recently updated my iPhone 6s with IOS 9.3.1 update. Since then, my phone calls are inaudible in my car with my Bluetooth. I deleted the device in my car and turned off and restarted my phone, but my iPhone is not discover the Bluetooth in my car. Any ideas on a fix?

  Sorry, I can't offer a solution but I wanted to get this thread to keep up-to-date.   You aren't the only one with this problem.  I have an iPhone 6 s + and with IOS 9.3.1 update, calls I am doing in the completely distorted sound car.  Also appears that Bluetooth is disconnection/reconnection intermittently.

  Just found the problem today so I did not go through the process of removal of device re-matching, etc.

• iOS 10 problems with the Mail application

  Dear Apple and community support,

  Here's my problem:

  I have upgraded to iOS 10 on my iPhone 5s this afternoon (September 13), and now I'm not able to open e-mail - Yahoo!, and Gmail. I can receive emails, I'm not able to view the body of these emails. When I press on them, all I see is a blank white page. I can't answer emails either. I can only their flag or remove them. However, I am able to compose new e-mail messages.

  Here are the steps that I've taken to try to solve my problem:

  1. Restarted my phone
  2. Remove and re-add my Mail accounts
  3. Made a backup and a restore full while that plugged into my laptop with the latest version of iTunes.

  I should be grateful if you would help or more information on this issue.

  Thank you

  Emily

  I also have problems with the Mail application.  On my iphone, ipad, and Mac Pro.  I have several addresses, a MSN, another on Go Daddy and Gmail.  I have various weird problems with threads and every day he re-charge my emails, like if I have never read before.  Something is really problematic with Mail.

  Can the people of APPLE, you help me?

• Problem with the installation of iOS 10

  I tried to install iOS 10 earlier but it did not work, so now that I'm trying to reinstall iOS 9 if my phone will work again, if this does not work I have to reset my phone (but I am a fool and did not a back-up because I never had a problem with the software updates in the past if all data will be lost).

  < published by host >

  The same problem with me too. After installing ios 10 nuer OTA my iphone brick! I'm trying to re - install ios 9 i-Tunes, but 2 hours now always stop installation... what happent?

• I encountered the problem with the last iOS 9.3.2 update I can't receive call from people, I can call any body, but when l'm calling people any body can ring me just now, I thing the problem where new soft

  I encountered the problem with the last iOS 9.3.2 update I can't receive call from people, but I can call any body, but when l called people any body can ring me only at this time, I think that the problem of the new update. can u check this and answer my question.

  and my phone

  iPhone 6plus

  You see a Crescent Moon at the top of the screen icon? If Yes, disable does not bother to: settings - do not disturb = Off.

• Problem with the length of locking in the strategy of password in the OAM

  Hello
  
  We are facing a problem with the configuration of length of locking in password policies in Identity Manager interface for our OAM configuration.
  Oracle 10 g version 10.1.4 Access Manager
  The user/policy store: ADAM Ldap [Microsoft ADAM 2003]
  
  After that block us a user in our LDAP after 5 attempts wrong, the values of both attributes in ADAM set updated to 5:
  oblogintrycount
  badPwdCount
  Also, I see that "oblockouttime" is updated with a unix timestamp.
  
  Now, we put the "lock duration" in the strategy of password as an hour. Thus, after 1 hour, the user must be unlocked in ADAM.
  However, after 1 hour when the user tries to connect, it gets the error an incorrect password has been entered for the user ID.
  
  When we check in ADAM, we find the value of "oblogintrycount" has indeed been reset. However, the value of "badPwdCount" will not reset and is always stuck at 5.
  If we set the two values of these attributes to 0, the user can connect again.
  
  Now, OAM should return two values of these attributes to 0, or is it only resets the oblix attributes?
  If it is the latter, is there a way to work around for this problem? Or we are doing something wrong here?
  
  Please let us know your comments.
  
  Thank you!
  Abhishek.

  OAM works only with the ob attributes * and not with the announcement badPwdCount attribute (ADAM). I think that for some reason, the strategies account and password of the ad is to be triggerred. Disable the password AD strategy and it will be Ok.

  I hope this helps. Let us know.

• Problem with the gallery after update 2.3 music

  Hello

  Recently updated my XperiaX10i (French version, not operator sim locked). No problem with the update itself and the phone seems to work fine.

  But, the music gallery has first not detected music files already in the sd card 32 GB (no problem for photos, videos or other files), and does not so load in the library. I had to download them all again through Media Go and now the library shows them, but album covers are not more in the album list as in version 2.1, which was very convenient for the selection, however the sleeves appear in the background during playback of a track: this looks more like a bug than anything else.

  I am also missing the first Quick Launch bar application for Wifi, Bluetooth, GPS, sync and the brightness of the screen, it seems that the launch of all these features to go into the settings file now.

  In conclusion, I hardly see what exactly improved on this phone since version 2.1. except maybe the speed and the quality of the screen display.

  Update from 1.6 to 2.1 was a total revolution in comparison.

  Power control widget is always there

  

• Anyone having problems with the new iPhone LTE connection 7 on Verizon?

  I am now on my iPhone second 7 with Verizon. I had four phones for me and my family. I have now had issues where I have no signal in the same areas where my signal allows to be strong. I can't solve the problem with the activation/deactivation of the airplane and then mode again in normal mode. My phone will rest with no signal for 5 minutes, then going to LTE with three bars. I also had the problem where I had only 1 x signal, while my son standing right next to me has LTE. And he had the same questions, where I'm on LTE and it gets no signal. I use to have LTE where I live and work all the time, now it's spotty at best. Apple has replaced me and my sons iPhones but not luck. Still do. Any ideas or an any other suffering?

  (1) go to settings/cell phone/cellular data Options/enable LTE and select ONLY the DATA. This seems to solve the problem (as a temporary solution) for most of the people affected by this problem. The bad part is your request might not be as clear (since they cannot use the highest LTE signals) and you can make calls and data at the same time. But it does not solve the issue.

  (2) there are rumors (but you didn't hear that from me that we only are not supposed to discuss beta software program Apple in this forum) that the new version of Apple Beta for iOS (which also includes an update of the software carrier Verizon to 26.0) seems to solve this problem. So, there's a light at the end of the tunnel.