A question for the A200 users "downgrading" to XP

Similar Questions

• Questions for the new user

  I work with the first and want to learn AE and have some basic questions. I want to work with a lot of clips of 2 minutes and less.

  1. can I import clips, add effects, making mounting base while AE without entering the PP? Is there a reason not to use this workflow?

  2. is there a website dedicated to showing video effects that can be created in AE? I would like to get inspiration for some of what can be done concretely AE.

  3. What are the limitations of the work in AE? In other words, what (s) it doesn't work well with? Why use Cinema 4 d or another program if these types of effects can also be made in AE?

  Thanks in advance.

  Check my lessons of Guru for a fun way to start with After Effects:

  

  After effects beginner tutorials | mamoworld

  you will find more resources to

  Getting started with After Effects (CS4, CS5, CS5.5, CS6, & CC). After the effects of interest area

  Yes, you can to editing base in After Effects, but it is VERY inconvenient because you don't have reading in real-time and in the timeline panel, each item is placed in a separate layer (i.e. a video is placed below the following).

  Therefore, it is better to mount first, then the individual clips tool EI to add effects.

  I also recommend this (paid) training by Eran Stern, who shows how to work with the two Premiere Pro and AE and what to do better in what application.

  After Effects for video editors by Eran Stern

  Compared to the 'real' 3D applications such as Cinema 4 d, the main difference is that EI does not support the actual 3D geometry, but essentially only "2D postcards" in a 3D space (over a few little extras like extruded text).

• Permission of files and folders for the same user on multiple computers

  Is it possible to set permissions files and folders different for the same user when he connect on different computers in the same domain?

  Example:

  There is a folder named "Folder1".
  When "User1" enter this folder by "Computer1" must have "Read & Execute" permission
  When "User1" enter this folder in "Computer2" must have permission 'change '.

  Thank you

  Hello

  Your question is beyond the scope of this community.

  Please post your question on the TechNet forums:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home

  Kind regards

• WMIC command fails for the domain user

  Hi all

  I use windows 7 and testing commands wmic as below

  WMIC/node: "Computer1" / User: "domain\username" / Password: "password" PROCESS CALL Create "calc.exe"

  Most of the time control fails with RPC server unavailable to users in the domain (default of 75%). Working sometimes and mostly failing to time.

  Error code

  0x800706BA-online the RPC server is unavailable.

  If I use the local user, she is successful, command below still works (100% success)

  WMIC/node: "Computer1" / User: 'Nom_ordinateur\Nom_utilisateur' / Password: 'password' PROCESS CALL Create "calc.exe"

  I have two computers running windows 7, the firewall is disabled

  Executing command from computer2 as below

  WMIC/node: "Computer1" / User: "domain\username" / Password: "password" PROCESS CALL Create "calc.exe"

  1 computer settings

  1. Adds the domain under group administrator user
  2. Configure dcom through DCOMCNFG.exe and got all rights to domain user

  (DCOM remote launch and activation permissions for a user, the remote DCOM access permissions)

  1. Rights granted to wmi namespace (root, cimv2) of domain user using wmimgmt.msc (all rights to the namespace namespace and sub)
  2. Firewall settins according to the - http://msdn.microsoft.com/en-us/library/aa822854%28v=vs.85%29.aspx

  Note: The firewall is disabled

  1. UAC disabled
  2. Check rpcss and associated to the computer and all services are running

  What could be the reason of failure for the domain user (work awhile and is Server Unavailable RPC over time). Tried to restart that wmic user system and field control did not exist, after awhile like 30-45 minutes user field the wmic commands work and default again. How to solve this problem (such as checking the logs)?

  Thank you

  Mani

  Hello

  I suggest you according to the question in this forum and check if that helps:

  http://social.technet.Microsoft.com/forums/en/winserverDS

  It will be useful.

• Glitch/Question of the root user

  All other encountered an error of password for the root user that uses a user admin instead account?

  Recently, I had to reinstall 10.11 on an iMac and went to create a startup disk. When I run sudo it asked for the root password (which is enabled) and kept saying "sorry, try again." I was sure I knew the password, but didn't so I reset the password of the root user. After the Reset Terminal still does not accept. I decided to user, my admin password and it worked.

  This is how it is supposed to behave or am I missing something? (Err is human but to REALLY screw up, run sudo)

  My Root user and the admin have the same password.

• Question for the geniuses of pictures only.

  Question for the geniuses of pictures only.

  You see, I started with iPhoto and later began to use Aperture.  With iPhoto and Aperture, you can have ALL the metadata below the thumbnails, (nice).  Well, I put all my images descriptions in the keywords section because it didn't really matter, because these programs could show them as thumbnails.

  Now, I use this wonderful program of Photos and I found out that it will ONLY show the title of"the image in the thumbnails.  I've got on 30 000 images with keywords but no title.  I want to move / copy the text in the keywords section in the section of the title. I'm not a computer scientist, I guess that my skills are in average.  But I can follow directions.

  Suggestions appreciated.

  Member of ASC compiled some useful on Photos AppleScripts. Maybe one of them will be sufficiently close to your needs.

  http://www.oldtoadstutorials.NET/no.P01.html

• How to make the updates of operating system for the limited user account?

  original title: how to make the updates of operating system for the limited user account?  Limited user account cannot access the Windows Update page, see instead cautioned against MS the most recent must be installed.

  XP Pro SP3 slipstreamed.  New a DBAN nuked HDD installation

  All the OS updates installed from Admin acct before creating the LUA

  AV installed AVAST

  all dot net uninstalled and then reinstalled to resolve a problem installing Quicken

  Updates to auto lit

  Active Windows Firewall

  Three solutions of workaround for Windows XP running as a limited user

  http://blogs.Computerworld.com/16502/three_workarounds_for_running_windows_xp_as_a_limited_user

  Survive a Windows XP Limited user account

  http://techknack.NET/surviving-a-Windows-XP-limited-user-account/

  See the response from Michael Kuntz - re: HAL files

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/thread/e8612ac4-b881-4FB3-85e7-32004932fb5f

  There is an available for installation of SP3 Cd

  Manually installing SP3 using the Microsoft Download Center or a CD

  If you have problems to receive the service pack from Windows Update, you can download SP3 as a standalone package from the Microsoft Download Center Web site, and then install SP3 manually. The installation package is intended for it professionals and developers, but you can always download and install this file.

  You can also order a CD from Microsoft containing SP3. For more information, go to the Microsoft site.

  To manually install SP3 using the standalone package installation or CD

  1. Do one of the following:

     • If you downloaded SP3 from the Web site, to install it immediately, click Open or run and follow the instructions on the screen. To install the program later, click on save and download the file to install it on your computer. When you are ready to install the service pack, double-click the file.

     • If you install SP3 from the Service Pack 3 CD, insert the disc into your computer with your current version of Windows XP running, and Software Update Installation Wizard should appear automatically. If this wizard does not appear, click Start, double-click my computer, click on your CD or DVD drive and then click AutoPlay.

  2. In Windows XP Service Pack 3 page, click Next.

  3. Follow the instructions that appear on your screen.

  4. Once the installation is complete, click Finish to restart your computer.

  5. If you disabled your antivirus software, turn it back on.

• The message I get is Microsoft word has not been installed for the current user. Please run set up to install the application. I reinstalled the software, but get the same message.

  The message I get is Microsoft word has not been installed for the current user.   Please run set up to install the application.   I reinstalled the software, but get the same message.

  Hello
  
  See the methods listed in the articles below and check.
  You receive an error "Microsoft has not been installed for the current user" message when you try to start an Office 2003 program or an Office XP program for the first time
  http://support.Microsoft.com/kb/898512
   
  You receive a message "Microsoft has not been installed for the current user" when you start an Office XP program or start of Microsoft Office Maintenance mode
  http://support.Microsoft.com/kb/298022
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I forgot the password for the authorized user account. How am I able to get on the authorized user account

  If I forgot the password for the authorized user account. How am I able to get on the authorized user account? I am the authorized user btw.

  Hello

  1. What do you mean exactly when you say 'authorized user account password'?

  2. who are you referring?

  Are you a person referring Windows user name and password, refer to the article that you give

  In addition, technical support engineers Microsoft cannot help you recover passwords files and Microsoft who are lost or forgotten product features.

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126/en-us

• How to give administrative rights for the domain users (user is outside organization).

  Hello

  How to give administrative rights for the domain users (user is outside organization).

  If the employee works in the company of xxxx but it supports the client project and is located on the place of the customer, but it does not use the client computer and not on the client domain as well, but the employee is in the company of xxxx must be given administrative rights to the computer. can someone help me on this ASAP.

  Thank you

  MURUGESAN Rudy,

  This issue is beyond the scope of this site and to make sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• ACS 5.4 ASA 8.2.5 disable AAA for the particular user

  Hello!

  I want to disable journaling Ganymede + for the particular user. This user is used only for automated (python script) pooling of vpn tunnel ASA (limited command set - permission on ACS) group to verify the number of users authenticated via VPN. The problem is that this user generate a bunch of logs according to authentication authorization and accounting on ACS. Is there a solution, disable Ganymede + newspapers on ACS for this particular user? Maybe it is possible to modify the AAA on ASA to not connect this particular user?

  Thanks in advance.

  Hi Pawel,

  You can create filters collection for that specific user. When you configure monitoring filters & Report Viewer does not record these events in the database.

  Navigate to: Configuration of the analysis > System Configuration > filters Collection > add a filter

  What follows is the attributes that can be used. You must use the user.

  -Access service

  -User

  -Mac-add

  -Nas - IP

  Example: We get several hits of ASA by 'user' and we want ACS to ignore it. Create a filter by using the user. ACS must now ignore any attempt from the IP Address of the NAS.

  Jatin kone
  -Does the rate of useful messages-

• I installed DirectX Runtime for the end user, but I have DirectX 11, there will be a problem?

  I have Windows 7 and so I always got DirectX 11, but someone on this forum recommended update DirectX and I didn't know how to so I just downloaded this thing official Web sites, called for the final user DirectX Runtime Web install which is apparently for version 9.29.1974. I want to know if this will become a problem for my computer.

  Hi WiccanxHulkling,

  No it will not become a problem you already have Direct X 11 on the computer.
   
  Some games or software may require an earlier version of DirectX so you can install the earlier version and it wouldn't effect the version of DirectX that is installed on the computer.
   
  However, in accordance with the following article x 11 Direct include Direct X 10 and 10.1
  How to download and install DirectX
  http://support.Microsoft.com/kb/179113
  Note this includes all components of the DirectX 10.0 and 10.1 runtimes
   
  I hope this helps.

• is it possible to restrict access to a particular application for the particular user?

  is it possible to restrict access to a particular application for the particular user

  for example, if an application will not be editable for user mode

  or it will be only editable for a user

  We gave access as a developer of a workspace to a single user

  but we don't want him to change a single application.

  Oracle Application Express 5.0

  Your terminology is mixed - looks like you're talking about limiting applications, a developer can edit in the application builder in a workspace.

  No, you can't.

• Order is created for the anonymous user without persistence of profile

  Hi all

  Could you please specify o how to implement below scenario

  Order is created for the anonymous user without persistence of the profile using cookies. So that when the user visits the site next time we can load

  order/cart previous from browser cookies.

  Yes, you can do that, the orders can be persisted without persistence of profile, but persistence of anonymous orders will increase the number of orders in the table quickly and can have an impact on performance, so if you plan to do it this way then make sure that your AbandonOrderScheduler job is running to clean up orders.

• Mismatch in number of index n/b dba_segments and dba_indexes for the same user in the database.

  Hi all

  I had incompatibility number n/b dba_indexes and dba_segments index. Please find the details below.

  SQL > select SEGMENT_TYPE, count (*) from dba_segments where owner = group 'VIM_SCH01' of SEGMENT_TYPE.

  LOBINDEX 11

  LOBSEGMENT 11

  TABLE 68

  INDEX 52-> I see 52 index are here

  SQL > select count (*) from dba_indexes where owner = 'VIM_SCH01 ';  --> See 63 index here for the same user in dba_indexes

  63

  SQL > select count (*) from dba_tables where owner = "VIM_SCH01"; -> showing the same number of tables from dba_segments

  68

  Why it's showing the different number for the index.

  Thank you

  Bhavani.

  No doubt, because your LOBINDEX 11 segments are has index in DBA_INDEXES.  You have 52 index and 11 LOB for a total of 63.  Corresponds to DBA_INDEXES entries.

  You can validate the fact that.  Run something like

  SELECT index_name FROM dba_indexes WHERE owner = 'VIM_SCH01'
  MINUS
  SELECT segment_name FROM dba_segments WHERE  owner = 'VIM_SCH01' and segment_type = 'INDEX'
  

  Which will return 11 index names in DBA_INDEXES but not in DBA_SEGMENTS with a segment_type of the INDEX.  If you compare these indices against the 11 sectors LOBINDEX, I expect you to see them at the height.

  Justin