A rectangle tilted behind the text - any chance to automate the process?

Similar Questions

• The shadow behind the text - Windows 7

  White under my icons on my desktop text seems to have a slim gray shadow and also on my PC, the black text has a very fine white shadow behind it. Any idea of what this could be the cause?

  Hi John

  much thx 4 your suggestion

  have found the solution to the problem :-). My son had put the monitor from the PC to 'movie' without telling us. Then I turned back on for it to 'text' and everything is back to normal. So nothing to do with Windows as it turns.

  But thx for getting back to me

  Mart

• Remove a white glow behind the text?

  I just installed Windows 7 today and it measures almost entirely to my taste, but I have a question; I don't know how to remove the glow behind the text on top of the different windows.

  What I'm talking about-
  http://imgur.com/0v10y.PNG
  (I apologize for the poor quality of image)

  It is not just the air very well, and I'd appreciate any help to remove.

  In my opinion, that if you can disable this feature (glow), you would not be able to read the text of title under certain circumstances.

• text not appearing is not behind the images

  Hello

  I built my new website with muse - www.visualeyes.design. I wanted to in order to get the layout, I built the site with images like backgrounds and have placed the text on a layer behind the image, so google can pick it up. Only problem is that the text does not appear when I look at the web Inspector. Any ideas?

  Jon

  You must place the text above the images for her show.

  Google should not have a problem if it is over a picture to text search, only if it is incorporated in the image, it would be a problem, because it is now converted to a png or jpeg file.

• InDesign: how tilt blocks of text without distorting the text?

  I want to put in place several large blocks of copy to these requirements:

  -the basic lines of the text are at an angle on the page

  -the left and right edges of the text block are shot-on horizontal (aligned with the guides in the screenshot below)

  -the block of text can be enlarged or reduced without changing the angle of the left and right edges

  -forms of the letters themselves are not distorted

  

  This screenshot shows what I'm after.

  

  This screenshot shows the real bounding box for the text block.

  

  This screenshot shows how the angle of the text box changes when I change its size.

  I think Illustrator is a kind of function that allows you to "zero" (reset the transformations of a grid of 90 degrees) an object after it is transformed. Not finding anything like that in InDesign. And I find no way to set a custom angle constraint that would allow me to use the direct Selection (white arrow) tool to change the height or width with confidence.

  I'd appreciate some tips! Thank you for your attention.

  I do so with the example of shooting. Tilt works the same way.

  1. draw your rectangle, I applied a text frame reference grid (textframe options)

  

  2. with the Selection tool or the transform tool turn the frame in one direction, you can also do this with the entrance of the value in the transform Panel, what I would recommend.

  

  3. now, select the direct Selection (white arrow) tool and hold the ALT key and click on the frame. Now, only the frame is selected. Turn the other way, or insert the value in the transform Panel.

  

  I also have another method to offer:

  1. Draw the main frame with the text tool.
  2. Draw a small box above, it must be much smaller than the main frame.
  3. Turn the small frame in the direction that where you want to go the text.
  4. Select the two images.
  5. Go to the Pathfinder > Add.

  Now, you can add text or select a text based frame reference grid. He will do the same as above. May be simpler.

• Hide the image behind a text layer before revealing?

  I am doing a project of kinetic typography together to a certain song.

  At some point, I want two words with the movement of the simple text and once that these two words are in place, I would like to display an image to rise behind them to be above them (not in standard sapce but 2D 3d).  Because the text is transparent, you can see the image behind the text before the image is set to move.

  I tried to create a mask around the picture that hides out, but when I move the image upwards the mask moves with the image, which maintains the hidden image.  I thought that maybe it would take an object null with a mask, but I can't see to make it work.  I think this should be easy, but I don't have the skills to pick up the pieces... any ideas.

  If it still makes sense?

  Thank you

  Rich

  Simple: make a rectangular shape (probably), layer shape and use it as a track matte for the layer in question.  You have the choice between either animating the cache by approach, or out of it... It all depends on if you are using an Alpha or Alpha reverse mast.

  And the layer in question, obviously, must be below the track matte layer in the timeline panel.

• Small opaque text behind the text in the form field

  When I type in the few fields on this application , namely in the children's section, on the first page and the section on the second generation something strange happens. When you type in the field, it works; However, it reflects the exact text BEHIND the text in the normal field. This text in mirror is small and opaque, but there nonetheless. When you print on demand, the whole area looks like jibberish due 2 texts that overlap. Any help would be great, thanks!

  For some reason, all the fields child, spouse's name # and Date of birth in this file are double, one on the other. And since they have the same names, their values are replicated, which is the strange shadow effect that you see.

  This occurs with other areas as well as in the file, but not with them.

• Menu Spry void ends up behind the text in the body section, do not click on

  Hi all, I'm new here to design web in general and Dreamweaver, summer study the CS5 classroom eBook.

  in any case, I have a problem with the spry menu bar. I have the navigation bar just below my head, its horizontal. And when I mouse over a menu link drop-down, menu drop down part ends by behind the text I have in the body, and I can't click on the submenu, and then the menu retracts itself, since I could not pass my mouse over it. Some tips on how to wear the spry framework forward at all and other things behind him?

  The problem here is that you are using absolute positioning without real purpose.

  Absolute positioning is based on a stacking order (z-index in CSS) to the elements of the stack on the page.

  A higher z-index covers a lower z-index.

  Your navigation div Spry has z-index: 3

  Your content div has z-index: 4

  If the content div covers the navigation div and the submenus (z-index: 3) opened under the content (z-index: 4).

  As an immediate fix, change the z index of the div of navigation to something really high such as 9999 so it will always be on top.

  As a longer term solution, remove the absolute positioning everything on the page and use floats, margin and padding to layout your page more firmly elements.

• Favicons repeat through tabs, behind the label text when you switch between tabs. 37.0.1 sometimes the Green scroll bar does not have too

  Please mention the attached JPEGS. When I switch between tabs, favicon image repeated behind the text. In some cases, the image of the vertical scrollbar is messed up, it cleared up when I click on it. -Does not appear to affect performance, simply annoying. Thank you!

  Please temporarily disable your Avast extension to see if it has to do with it.

  Try Firefox Mode without failure:

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• Any chance you get the status bar?

  Any chance can get you the status bar, because all updates FF28 past do not have the status bar which is where most of my favorite Addons are located (for example, eQuake Alert and ForecastFox. It's really annoying. I had to disable the automatic updates because of that and stay with FF28. I'm sure someday FF28 will become obsolete and then I won't be able to use my Addons.

  "No matter how lucky can get you the status bar?"

  Little or no chance to happen. As you very well know, there are one or more extensions to restore the bar of the add-on for Firefox 29 + versions.

• Text on the image of the façade descends behind the image

  See attached screenshot. I have a tab control of façade 1 with a .jpg as background image, and I'm putting text on this image. Place the text on the image is ok, but sometimes, not always, when I change the text or move on the image, the text ranks BEHIND the image and I can't bring it back to the foreground, or in front of the image. He's unpredictable. What I am doing wrong?

  

• ToolTip text disappears behind the Panel

  When I create a ToolTip (CVI2012 SetCtrlToolTipAttribute...) to a control on a panel where the group attribute floating Style is set to Always,.
  the ToolTip text is not visible, but disappears behind the Panel.  Is this normal?

  Unfortunately, the answer is Yes, see here

• Solid color behind the text of the desktop icons

  Hello!

  Is it possible to have a solid color behind the text of the icons in Windows Vista/7/8/10 without using a third-party software?

  Thank you!

  See: http://answers.microsoft.com/en-us/windows/forum/windows_7-desktop/desktop-icon-font-color-how-do-i-change-the-font/ef5e2f24-e6c9-40a0-88a9-30bf8a69114a

• text appears behind the image in the header

  I have a MS Word document with pictures and text. In the Word document, the image is sent to the rear and assigned as behind the text. However, during the conversion using Acrobat 11, the text is hidden behind the image. As the text is the page number in the header, solve this will require rearranging in all cases.

  Is there a way to get Acrobat to follow the layout of Word correctly - or, failing that, to the multiple / reorder batch?

  Thank you

  Bruce

  Hi Bruce,.

  As you can not update your Acrobat. A solution you can try powering down of the option "enable accessibility and reflow with tagged Adobe PDF" in Acrobat-> preferences in the Acrobat to Word Ribbon and check if this solves you issue. Please note turning off this option will result in the creation of non-tagged pdf files.

  Kind regards

  Basma

• Interactive PDF layers appear behind the text. A script can move them to the top layer?

  I have created a form in InDesign CC (latest version on a Mac under El Capitan). I export the form in PDF format. There are some interactive tooltips (with suggestions on how to fill in each particular field) implemented as buttons. The control keys are static. When I click on the trigger, the bubble appears, when I click on the bubble, it disappears. The problem is that even if the bubbles are set up on the top layer in InDesign, in many cases they appear behind the text layer.

  Is there a script that I can add to each individual bubble that says "when this bubble is active, move it to the top layer?

  This project took over 3 weeks of troubleshooting. In the end I came up with my own results. The answer was "no, it isn't a script."

  With the help of the Adobe customer service, we found that because in the InDesign file, I had the pop-ups on a different layer than the triggers, it was causing a problem of overlap. I found myself by combining the layers into a single, moving pop ups to the elements high on the page in the layers palette.

  Then I exported (interactive) PDF from InDesign and in the PDF file, in edit mode, in the fields Panel, I've selected all the pop-ups and offers them to at the bottom of each page [z-index property]. A lot of manual labor, but in the end, I got most of the results I wanted.