A secret shared 20 bytes works with GBLink v4?

Similar Questions

• House-sharing has stopped working with all that, please help.

  Today is December 18, 2015. Sharing House had stopped working a few months ago. I called support and they went well a lot of things and finally said: "No, it will never work." I insisted on the conversation with someone else, they me connected. He does a lot of things, including starting in safe mode. We had disconnected from all off all the home sharing on all devices. Off all routers. Apple TV, etc. (Airport Extreme connect to a router from Verizon. Tried of Double and single mode NAT-bridge), I think that we have erased all cache files. Reinstalled iTunes several times. At a certain point in home from work sharing.

  Now, he stopped again and I tried to repeat what we have done. I looked in the Ports (using iNet) and did not notice anything running that uses a specific port "5353" which is supposed to be for home sharing. I saw "3689" appears twice, i.e. for 'iTunes Music Sharing, AirPlay. In any case 2 Apple TV and 1 iPhone cannot access home sharing. House sharing is enabled on all three devices and in iTunes on the Mac Book Pro.  In order to confirm that all 4 devices are connected to the network, I scanned the observation network all devices and their IP addresses. The two Apple TV are 3rd Gen iPhone is a 6s, the Mac is a "(retina, mid-2012) MacBook Pro" the router is an Airport Extreme tour. All devices have the latest Firmware, software, etc. Since I have an iTunes account before .mac, .me, iCloud came out I found myself with two pieces of identification of the Apple.  Why they did not automatically merge these, I have no idea. In any case I'm stuck with a Store, iTunes App Store for music, movies, applications, etc. and an iCloud for synchronization, calendar, contacts, ETC. account between devices. Without worrying only the same App store / iTunes store account Apple ID is used to connect to the iTunes Store on all three devices. I do not use family sharing!  I have the firewall turned off on the MacBook. I really expect not sharing never start to work at home. The file on this subject on 26/09/15 number has been '947596222 '.  What I have not tried, I'm ready to.

  Well the answer is: turn on home sharing in preferences does not work! It is now in the Menu file, it should be removed from preferences.

  Nobody ever says do me it otherwise, so I always had. So, if you didn't know that you do not use preferences to activate home sharing more. Go to your file menu in iTunes and turn there.

• ITunes game works with the sharing of the family?

  My wife and I have separated Apple ID, but we have enabled sharing of family.  I was wondering if I activate iTunes game, applies to the two Apple ID through the sharing of the family?  Or could it be that I have to buy iTunes game for two Apple IDs?

  Hello

  Family sharing does not work with iTunes game.

  Jim

• Shared WEP not working only not with the new Inspiron laptop

  Hello

  I just bought an Inspiron laptop a few days ago. I have problems to set up my wireless network. When I change my open router for WEP connection works fine on my laptop, but when it is about shared WEP an error message saying that it was unable to connect. The thing is that I have other wireless devices on my network that only work with WEP shared. Is there anyway that I can get my laptop to support this connection? I have an Inspiron laptop with equipped with a Wireless N card.

  
  

• Connection API with a secret shared instead of the password

  Is it possible to connect to Connect via an API call using a secret shared instead of a password?  All of the examples I see uses the value of the password to the action of the connection, but I think that if the shared secret value is set, there should be an option for this as well.

  You can talk to Support Platinum (you should be on a deployment allowed since you are using SSO) and see if they have all the methods to do this. It's maybe just something that's not in the API documentation.

• Why Downloadhelper does not work with Youtube?

  I used the add-on video Downloadhelper years on my laptop without a problem. I noticed about three days ago, that he did more work with Youtube videos. Rotation icon still works, and when I click it, it still gives me the choice of file type to download. However, when I click on my choice, the green arrow shows the download process, but happens ' 0 bytes"for all types of video.

  I don't have problems to download videos from other sites I've used before, just from Youtube.

  Also, I am able to use Downloadhelper with Youtube on my other computer without problem.

  Can you please help? Thank you.

  Google/Youtube are trying to block the addons like these, maybe its been blocked from youtube, I would try FVD.
  https://addons.Mozilla.org/en-us/Firefox/addon/Flash-Video-Downloader-YouTube/

• Programatically register values of control only works with Ctrl Val.Get all (not recommended)

  Hello

  I just downloaded "programmatically save 86 vi of https://decibel.ni.com/content/docs/DOC-3551 control values.

  This works.  In the recording, but there an invoke with Ctrl Val.Get All (deprectated) node structure of the event.  I thought that I would get rid of the obsolete reselecting the control method get all.  Of course it was more an (outdated) at the end and the top of the page, little changed from pink to yellow.  However when I run and load a file that is saved I get: error 116 took place to Unflatten chain... Possible reasons:

  LabVIEW: Unflatten or stream of bytes read operation was in pain due to corrupted, unexpected or truncated data.

  A few questions:

  If I were writing this thing without having to download the example it wouldn't work.  Any ideas how I would work in LabVIEW 2011?

  The example is quite old, people would use another method of loading and storage of the parameters in a VI these days?

  This VI crashes after a while.  Is it because he has two event Structures in a loop or because there is no case of timeout or what? (I am not really concerned about why it crashes but if someone knows the answer without wasting time running it I'd appreciate it)

  Thanks for the tips, things that I can draw from this

  The old ways worked with a data type that was {name, type descriptor, flattened data}. The use of new methods {name, variant}, to adapt the code to work with this data type. Also, you cannot use the old data with the new code files.

  I'm assuming that the VI is lock because you have two structures of event in a loop simple (it would make sense, since each structure must wait for an event is to occur), but I'm not the code itself, I can't be sure.

  With respect to the other options, I generally without saving all the controls on a front panel, but when I want to record a bunch of controls, I usually use something like this, which can also work if you collect all the controls of the FP. There are also links to other similar things in the more 'like this' section with the page.

• Not a number/path/Refnum? Does not work with a reference SE

  Hi all

  I am writing a LabVIEW application and check that the Switch Executive session is valid before I allow the user to validate the test to run. I connect the not A number/path/Refnum? Function to reference session SE and it connects correctly, but the output of the function is never wrong even though I see the session reference is valid and non-null. Any ideas why this is?

  Thank you

  Nick

  It was a trick to convert a reference internal in an external shared library (usually a pointer memory) in a datalog refnum strict typedefed. This safely prevents a user to connect to what anyone, but this type of refnum at the VI in question. But this wasn't really a datalog refnum and the is not a number/path/Refnum refnum, which subsystem to question the validity of a refnum to determine based on the subtype. The LabVIEW datalog Manager ever created this refnum and hence will return correctly (not one of my refnums which is currently known to be valid).

  Because of this problem the misuse of datalog refnums as a unique resource identifier has been abandoned more in recent years. Also it will work with any external resources representing pointers memory when using 64-bit LabVIEW, since memory pointers are big in this 64-bit environment LabVIEW refnums are still 32-bit.

  Collate OR if they have a newer version of the Switch Executive in gestation or perhaps already out.

• Working with USB high speed Interface Modul 2.7 in LabVIEW

  Hello

  is there an example works with a USB high speed Interface Modul 2.7 in LabVIEW?

  The EGG is a "Cypress CY7C68013A-56PVXC»

  Thank you

  Best regards, patrick

  Hi patrick,

  I searched on google for the module. The manufacturer is Braintechnology.
  If you need a LabVIEW driver ask them please, maybe it's that they can provide you with a.

  Braintechnology offers a DLL - USB. With a little work, you can include this dll in your LabVIEW project (call library function node).

  The following documents explain how to:

  Integration of external Code with the Shared Library Import Wizard (requires a corresponding header dll)
  http://zone.NI.com/DevZone/CDA/tut/p/ID/2818

  Writing Win32 dynamic link (dll) libraries and qualifying of LabVIEW
  http://zone.NI.com/DevZone/CDA/tut/p/ID/4877

  Example: Passing a variety of Data Types in the DLL for LabVIEW
  http://zone.NI.com/DevZone/CDA/EPD/p/ID/1288

  Kind regards
  N. Ralf
  NIG.

• DeskJet 712c does not work with Win 7

  I recently switched to a new win 7 Home Premium SP1 (64) my old XP computer which worked well with my printer.  The printer does not work with the new OS and the computer.  Even if the computer indicates that the device is functioning normally, the printer will not accept print orders.  Not even the printer print test.  There is no error reports but the system behaves as if the usb is not connected, even though it is.   There were no changes in connectivity before or after installing new software (or trying) trying to get the new computer set up.

  I just found it and tried the wizard of the printer which also implies that the usb is not connected even though it is.

  The compatibility options have done nothing to help.

  Tara,.

  EUREKA!  At the risk of party too early, it seems that I am able to print with my new computer (HP).  Fixed after almost endless hours trying to get my printer to work despite many internet messages saying it could not be done and other giving solutions that didn't work.

  Why o ' why the solution apparently a hidden secret and why the tools did not work?

  In any case, thank you very much.  With all the problems I'm having to migrate to Windows 7, it's a very important achievement.  Thank you, thank you.

  Chuck

• Microsoft SyncToy will work with Windows XP?

  Original title: Windows backup & recovery software.

  Microsoft SyncToy will work with Windows XP as backup & recovery or only spiritual utility Windows 7?

  Hi Daryl,

  Which version of the Microsoft SyncToy software you want to install?

  SyncToy 2.1 is an application that synchronizes files and folders between locations.

  It is generally used for sharing files, such as photos, with other computers and create backups of the files and folders.

  If you want to install Microsoft SyncToy 2.1 on Windows XP, you can download it from this link:

  SyncToy 2.1

  Hope the helps of information.

• 128 - GB MicroSD card does not work with the new Clip +.

  My old Clip + (black, 8 GB) was getting very long in the tooth, so I ordered a replacement off Amazon.  As far as I know, it is identical to the old, but a very unpleasant difference is presented - it does not work with the MicroSD card which has been a huge part of why I got a Sansa at all.  He acknowledges, but after a media updated I'm lucky if more than one album appears.  And that's what's so crazy!  You just blow through the update in a few seconds, and when I navigate on the map, there is nothing or a handful of albums random, orphaned.  That's happened?  I updated the new Clip + for the current firmware (as I had done with previous); I made sure to reproduce all the parameters that I would be put in place before--I can't imagine what could be the cause!

  Treats quick closing:

  The card is formatted in FAT32 with the same sector size in storage aboard the player (32 768 bytes).

  A 64 GB card format works even without any problem.

  I tried to update the media in MTP and MSC mode; the problem is the same in both.

  There is ample space for MTABLE. SYS - I have not yet loaded all the music on the Clip + itself.

  Rockbox plays the card without problem, but the sound quality is horrible (at least on this player; I'm sure that other versions sound best), and its interface is a headache.  No thanks.

  HM.  Looks like to run CHKDSK /F on the map the problem resolved!

• The WPS54G Wireless Print Server works with Vista?

  The WPS54G Wireless Print Server works with Vista? I have a new Dell Vista laptop and unable to connect to the print server. The other XP machines on my network will connect correctly.

  I just got credit working mine in the answers above with a few small differences.

  1. Add the appropriate printer from the control panel > printers > add printer

  2. Select local printer, and then select [Create New Port] > [Standard TCP/IP Port]

  3. [device type] > [TCP/IP device]. Host name or IP address must be the IP address of the print server device.  I use a linksys router and difficulty mine to 192.168.2.10.  Check and are not [query the printer for and auto...]

  4. once nothing is detected, select [custom] > settings

  5. Select LPR, L2 the name value in the queue for a USB printer.  Turn on [LPR active of counting bytes.  Queue names are distinguished by the printer and I think as Mfg ("queue name" search and replacing your printer for queue names.)

  6. Select the Mfg and printer

  7. If the test page does not have a last thing, it is turn on [Control Panel] LPR Print Services > [programs and features] > [activate Windows features ON OFF] pane.  Go to [Print Services] and check on [LPR Port Monitor]

  Hope that makes the magic for you.

• Vista do not you answer ping - file sharing also stopped working

  Greetings!
  I have problems with my windows vista computer. It can access the internet, load the pages and other servers, ping, but he stopped answering the ping requests and file sharing has stopped working (other computers cannot access its actions).
  -J' have already disabled the two firewalls (both windows and f-secure).
  -If I run wireshark, I can see the Ping ICMP requests (as they arrive at the machine), but ignores them (no ICMP response).
  -When I try to browse the computer from another windows (windows 7), he sees the computer (they are on the same workgroup), but it is impossible to browse. Try to access it from a mac also fails.
  -J' tried to use direct ip address instead of the netbios name, with no luck (access to \\192.168.1.101, for example).
  -Of course, I tried already reboot my router, computers, etc.
  -sfc/scannow detected a few corrupted files (but says he fixed them). But it did not help.
  -J' thought that it might be a problem with windows system files, so I uninstalled SP2 and then reinstalled with no luck at all.
  -J' already tried to reset the tcp ip (netsh int ip reset) stack but also had no success.
  -I'm clean of viruses; already run 3 different AVs (including boot from rescue CD to detect rootkits) and nothing came.
  I'm almost reinstall my whole windows, but I'm afraid even if it cannot solve the problem and having to install from scratch and reinstall * all * my new aplications will be a last operation of the station. Clues as to what I could do? Is there a way manually reset/reinstall only the sectors/services windows network?
  Thank you for your time,
  Gustavo

  Greetings!

  Just the answer I finally had myself on this issue.
  The problem was a malware removal tool called Combofix. I had an infection and several tools to clean, one of which was this tool. I ignored the warning to leave unattended a guru of malware removal, and I just let it do its job (I know, I was wrong... but desperate times require desperate measures). Apparently, he finished and my system was working fine... but not the file share and ping responses.
  Finally, there is a way to reverse the changes made by the latter:
  • Go to C:\WINDOWS\ERDNT\subs\erdnt.exe, double-click erdnt.exe , and then restart the machine.
  • If this does not work, then navigate to C:\WINDOWS\ERDNT\Hiv-backup\erdnt.exe, double-click erdnt.exe and restart the machine.
  By doing this, the reverse tool changes to the system registry and these two services that weren't previously returned to work normally.
  The Trojan horse itself not worried anymore, because I ran Combofix all as precautionary measure, since I had already deleted the Trojan horse itself (ZeroAccess, by the way).
  That being said, I would think twice before getting a Dell computer next time... The version of Vista that comes with it only allows a 'Clean Install' and not 'upgrade install', which seriously complicates to reinstall the system failure (since I have to reinstall * everything *). I wonder if other versions of windows to PC manufacturers have the same limitations...
  Gustavo

• HP Photosmart Plus B209a-m stopped working with a Macbook, still works with others

  We had this printer wireless printing of 2 Macbooks a running OS X 10.8.2 and another OS x 10.6.8 without any problem for some time when it suddenly stopped working with the old Macbook running 10.6.8.

  When we tried to print anything in that nothing happened, when we open the print queue, there's an exclamation point to the left of the print job and to say an error message something about the levels ink (ink levels were very well as it print to the other Macbook without problem).  We tried the buttons pausing and resuming.  I can't provide exact errors that we had because now that we have tried to reinstall the drivers we get a new series of errors.

  We redownloaded the drivers for OS X 10.6 on HP website and tried to go through the HP setup assistant.  When we arrive at step 'Select printer' and he takes us into the preferences system to add a printer - our printer shows up, but when selected, we get the following error message: some of the software of the printer is missing.  You may not be able to print to "HP Photosmart Plus B209a-m" Please reinstall the printer. software - and of course, we are not able to print.

  We uninstalled and reinstalled the drivers several times without any effect.  The only way that we were able to print off the computer is if printer sharing is enabled on the other Macbook (with OS X 10.8.2).)  Then, it presents itself as a separate printer and can be used by the old Macbook only if the other is on.  This isn't how it was put in place when we had the two work before.

  Any advice would be appreciated.

  Margorie

  What router are you using?  I guess that the 10.8 machine can print correctly?

  Let's start with that on the 10.6 machine: download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.