A signed application deployment

Similar Questions

• I'm unable to get a signed application to start

  I built a small built-in browser JavaFX application that uses a "FileChooser" element to access a file on the desktop.
  
  I'm fairly certain that this file access will require the application must be signed, what I did with a real certificate. (I also tried with a self-generated certificate too, with the same results.)
  
  The problem is this race, that it results in an error in the browser:
  "Run-time error. Click for more information"(Firefox)
  
  Or on IE:
  «JavaFX application failed to launch because of the configuration of the system (error show Invisibles).» See java.com/javafx for troubleshooting information. The 'details' really say anything in particular that gives me a clue.
  
  I get the result even if I try to run the application directly from Netbeans. However, if I deselect the option "Request unlimited access" in the project properties, the application will run (from Netbeans as well as deployed on a server), but the file you choose won't work, because of a security violation.
  
  Can someone tell what I am doing wrong? I guess that these signed applications should work at this point. Maybe it's something in my code, but I'm a little bit lost at the moment.

  With the #1 option - I have modified and rebuilt the pots 3 rd-party and them referenced in NetBeans. When I choose clean and build, the treated Ant produces an error: "jarsigner returns 1. So it doesn't seem to work at all.

  As long you have re-built the jars properly without the original signature, I think it should work.
  Here is an example of unsigning a pot using Ant:
  http://Frank.zinepal.com/unsign-a-jar-with-Ant

  Don't you think that the idea of multiple-JNLP would work if NetBeans applies to "my" signature for 3 rd-party bribes? Apart from manually copying the original pots in the \dist directory, is there a better way to tell NetBeans to leave the JAR 3 rd-party only (IE, not to sign again)?

  I think it is supposed to work (this is the mixed code signing situation I mentioned in my previous post).
  For example, from your description that looks like the build of NetBeans default can't really not this type of deployment, so you should create a custom version that does what you need and are not triggered by NetBeans - what is feasible, but boring - it's looks like you tried this, but have been unable to operate as expected. For NetBeans specific help, you better post to a forum of NetBeans (although you might be only the second person who tried to do it with a JavaFX application).

  You should also check that the end-user experience is acceptable, because I think that the dialog box and alert to the situation of mixed code management is different.

  Search the section deployment guide "use for the descriptors of the Extension"-I think it documents how to do what you want if you are using a rather custom build file to let the NetBeans to do the work:
  http://docs.Oracle.com/JavaFX/2/deployment/javafx_ant_task_reference002.htm#CIABGCEE

  Hmm, a lot of running to walk around to deploy an application that can open a file...

• Error: The application cannot be run your security settings have blocked a self-signed application to run.

  I tried to save a certificate for digital signature on www.incometaxindiaefiling.gov.in.
  When the site was asked to run the applet Java JRE7, which I have allowed.
  But then the small window appears with the following message;

  Application blocked for security reasons
  Cannot run the Application.
  Name: StoreCertificate
  Location: http://incometaxindiaefiling.gov.in
  Reason: Your security settings have blocked a self-signed application to run

                  [  OK  ]       [   More Information...   ]
  

  Hello darshan_3101, this message is not firefox but the java plugin - please refer to the documentation of oracle on the topic: http://www.java.com/en/download/help/appsecuritydialogs.xml

• Cannot sign application-unable to find signature keys

  Hi, I received a file .csj of the RIM, but I can't use it because the signing tool requires the .csi file.

  When I try to create key using java-jar SignatureTool.jar

  Messages

  The system requires a .csi file or .cod... the program assumes that the extension is .cod

  Generate a private key

  request password

  generation of key...

  the file extension does not match... coming out

  What should I do?

  I'm also confused do we have to compile the .zip files using this key? Compilation of the said process "don't sign application-unable to find signature keys.

  Thank you

  Ooops I was testing with key playbook, csi works for smartphones.

• BB10: My signed application does not open after Installation of device

  Hi guys,.

  as the title suggests, does not open my signed application.

  A few facts:

  • When I touch my application signed on the device icon, the screen shakes from left to right, as a sign that he can't open.
  • It works fine when I use the debugging token and charge of QNX Momentics IDE.
  • I use a program called DDPB to install my signed. BAR in the device.
  • I signed with the same signature and with the same program (DDPB) other applications and they open.

  Gosh, I just need to make it work so I can download it from AppWorld. And my client is in a hurry and he's angry.
  

   

  Any ideas on how to solve this problem?

   

  Thank you very much!

  "Q_DECL_EXPORT" is in front of your main function?

  main.cpp

  Q_DECL_EXPORT int main (int argc, char * argv)

  Recently point your SDK?

• Package id error. Signed applications WebWorks.

  Could someone please tell me why when signing of the same app for OS BB10 and PlayBook OS I'm different application id in MANIFEST. File MF, which translates as the rejection by the supplier portal .bar file downloading.

  Two software development kits are recent, if it's important.

  Unchanged demand, has signed for various devices.

  The two signature process managed just different Package name in the MANIFEST. MF file. (Must be the same because same config.xml served.)

  Keys used are the same.

  Here are some examples:

  BB10 MANIFESTO. MF

  Package-Type: application
  The package author: me - it's always the same with key set
  Package name: XXX - specified in the xml file must be the same
  Package Version: 1.0.0.0
  Package-Architecture: armle-v7
  Package-author-certificate-Hash: xxxxxxxxxxxxx-xxxxxxxxxxxxxxxxxxxxxx
  Package-author-Id: me - it's always the same with key set
  Package-Id: this should be the same for both packages since the Package name is the same
  Package-Version-Id: number of Version loads
  Package - Issue Date: 2013-04 - 28 T 08: 18:12Z

  PlayBook MANIFESTO. MF

  Package-Type: application
  The package author: me
  Package name: XXX608d35518356ae28ab6cb8e8ck6b11b - see what screws everything up
  Package version: 1.0.0.5
  Package-Architecture: armle-v7
  Package-author-certificate-Hash: xxxxxxxxxxxxxxxx xxxxxxxxxxx
  Package-author-Id: me
  Package-Id: not the same thing because of the different package name
  Package-Version-Id: number of Version loads
  Package - Issue Date: 2013-04 - 28 T 08: 18:18Z

  608d35518356ae28ab6cb8e8ck6b11b - this is what's wrong with the name of the Package.

  .bar signed for BB10 comes with Package name normal one specified in the config.xml file in the identification sticker. .bar signed for PlayBook OS comes with the package name that resembles what would like normal more lots of numbers uttachet him he looks a bit like a hash keyword. But there simply just to imitate what is specified in the tag of the config.xml file.

  As I said package PlayBook is rejected by portal provider for some reason "different ID of Package". (Why Package ID would be the same if your own BlackBerry signature tools mess). BB10 verson was transferred first. What I'm trying to tell if verson PlayBook would be first, then the BB10 version would be rejected for exactly the same reason.

  That leaves me with two options:

  1. try to solve this problem with the support of the seller. (Not going, the last time I'm angry "why did you change your package of them ID")

  2 forget PlayBook, at least with OS its market now. (Who cares anyway, upload was almost merciful because it is not worth even the whirlpool to go thrugh signature and the download process, which is particularly hideous for PlayBook).

  The third option would be just to create something like 'Application for PlayBook' in portal provider, but that's all just stupid because it would be the same application but under different names therefore not cross-platform for users of BlackBerry ID.

  Also can't help but to say rim (BlackBerry) should gather their things and come up with a single tool can be used to sign applications. Because they have now looks more like a joke if it isn't insult all together. Process is mindbending. and if you want yourself (almost 100% certainty) frustrate develop, sign and app World de BlackBerry download. You will be pleased.

  Anyway everyone has had similar problem when downloading the BB10 and PlayBook .bars to the provider portal would be nice here how solve you it.

  See you soon! And the development of the happy. (which isn't the most difficult part, but you already know)

  This is because that the WebWorks SDK for Tablet added a random GUID to the package ID to make it unique.  The BlackBerry 10 SDK is no longer for it.  Unfortunately, this means that if a developer rebuilt their code even using the SDK for the new platform, then BlackBerry World will not see them as being of the same application (since the internal ID is different).

  There is a solution - what you need to do is change the id property of your element in the config.xml file to match the package-name of the file 'manifest '. MF' Tablet-OS.

  Here is an example of what I mean.  If the MANIFESTO of the PlayBook. MF file shows that 608d35518356ae28ab6cb8e8ck6b11b has been added in the name of the package of fooBar, then set your id like that

  http://www.w3.org/ns/widgets"
          xmlns:rim="http://www.blackberry.com/ns/widgets"
          version="1.0.1"
          id="foobar608d35518356ae28ab6cb8e8ck6b11b"
          xml:lang="en">
  

  It's not pretty, but it works.

  Once you recompile, BlackBerry World will then recognize the bar and allow you to present a new bundle for the existing version.

• Error at startup of a signed Application

  I have a signed application that installs and runs correctly on a number of devices.  On some devices, the application fails to start with error "error starting : Module '' trying to access a secure API."  I use safe APIs, but my COD is duly signed.  Is there a setting on the phone that could cause this problem?  How can I see which API is the source of the problem?

  
  

• How to restrict access to the service web application deployed on weblogic for user group only

  I built the web service application in jdevelopler 11.1.1.7. Their security policy applied in the web service of the default Oracle policy which is (policy: Wssp1.2 - 2007-Https-UsernameToken - Plain.xml)

  Now all want to access the web service application must provide the name of user and password in the header section of the SOAP request to meet the requirement of the policy.

  the following steps I'm trying to restrict access to the application of web service with a specific group of users among users of weblogic:

  Connect to the weblogic administration console

  Create user or group of users

  Click on the links of deployments

  Select your web service

  Click the Security tab

  Click the sub-tab political

  Choose your authorization provider in the menu drop-down (looks like by default)

  Choose Add Conditions-> Group-> Type in the name of the Group

  Finishing

  But access is always available for all weblogic users (IE users not in the group specified in the above security configuration). How can I restrict access to only authorized group? Any thing lacking in my approach?

  There is nothing wrong with the steps mentioned in the question. In addition, you must do the following

  At the time of the application deployment with regard to the security part, there is a list in the title of the question (which security template you want to use with this application?)

  You must select (Advanced: use a custom template that you have configured on the page of configuration of the Kingdom) a configuration mentioned in the question will be work

• Do WLST exception like ' target the exception that is thrown when the application deployment: no such file or directory found in the location of the specified application: "all administration server application deployment

  Hi all

  I'm trying to deploy an application to the administrator of the server using WLST and I had followed steps below.

  (1) I ran setDomainEnv.cmd

  It was performed without error.

  (2) connect to the Server Admin

  Connect ('USERNAME', 'PASSWORD', ' t3: / / localhost:7001', adminServerName = "AdminServer")

  (3) to deploy the application

  deploy ('benefits', 'C:\Users\suhas\Desktop\benefits.war' target = 'AdminServer')

  Traceback (innermost last):

  Folder "system <>", line 1, in?

  File '< iostream >", line 246, to deploy

  File "< iostream >", line of 1848, in raiseWLSTException

  WLSTException: Error occurred when executing deploy: target the exception that is thrown when the application deployment: no such file or directory found in the location of the specified application: C:\Users\suhas\Desktoenefits.war : no such file or directory found in the location of the specified application: C:\Users\suhas\Desktoenefits.war

  DumpStack() to view the full stacktrace

  WLS: serverConfig/test_domain / >

  I'm the exception above, I gave the exact war file path while the deploy command of race but represented except the application path refers to a path that does not exist.

  I, e. instead of display C:\Users\suhas\Desktop\benefits.war C:\Users\suhas\Desktoenefits.war appear

  Please help me solve this problem.

  Thank you and best regards,

  Suhas

  You can use the script here

  Automation of the deployment of the application on Oracle Weblogic Server

  Use a backslash instead of the forward slash... and type it instead of copy paste...

• External link or iFrames to show an application deployed inside my portal template

  Greetings,

  After days of post in the forums for discussion of WebLogic Portal with no response, I'm showing the same

  discussion here, hoping someone can help me in this task.

  I'm using JDeveloper 11.1.1.7 and I create a web portal application.

  I have adf applications deployed on a stand-alone weblogic server that works very well.

  In my portal, I add an external link, inside the model-navigation-by default (used for example oracle)

  to make my application within the context of the portal area. (I'm trying to use iFrames, but it did not work)

  If I add another web page, it works fine, it shows my menu of the portal on top when the banner is, menu,

  and the Web site below. But when I add an external link to show my application, it doesn't show anything, just

  white white background. I also noticed, it happens if I add google website also.

  There are bonds that I have to disable in weblogic, so it can be rendered on my web portal?

  Do you have FRAME_BUSTINH?

  Check Impossible to load the content in a frame. Content of the framework to load the next level

  Timo

• error on service cloud oracle adf application deployment

  Hello, I hv saved cloud oracle java and database service. I hv created adf simple application in which there are 2 jsf pages only linked together. I m using oracle jdeveloper 11 g 2. so I hv created file ear for deployment in the cloud. I have deployed adf the cloud using the java console application. But after downloading applications, deployment failed. I tried 3 times, but the result was the same. I checked the logs, I got 3 warnings in the whitelist log and error in deploy newspaper. Those are the following:
  
  Warnings in the whitelist log:
  
  2013-04-14 06:57:11 CDT: start action "API Whitelist.
  2013-04-14 06:57:11 CDT: began API whitelist
  2013-04-14 06:57:12 CDT: WARNING - there are 3 warnings (s) found for Testapp.ear.
  2013-04-14 06:57:12 CDT: WARNING - Path:Testapp.ear (3 warnings)
  2013-04-14 06:57:12 CDT: WARNING - Path:Testapp.ear (3 warnings)
  2013-04-14 06:57:12 CDT: WARNING - Path:Test_ViewController_webapp.war (3 warnings)
  2013-04-14 06:57:12 CDT: WARNING - path: WEB - INF * (1 WARNING)
  2013-04-14 06:57:12 CDT: WARNING - 1: "login-config' missing under element child element has recommended.
  JavaEE:web - app.
  If you want to publish your application, you may have vacuum
  < login-config / > in your web.xml file. If you require authentication, you must then
  have <>login-config and its child < auth-method > element in the web.xml file.
  Without this element (< login-config >), users can be challenged by SSO, but
  the code of the application will be run as an anonymous user. Line no.: 4.
  2013-04-14 06:57:12 CDT: WARNING - path: WEB - INF * (2 warnings)
  2013-04-14 06:57:12 CDT: WARNING - 1: recommended "jsp-descriptor" missing under element child element.
  ORCL - weblogic:weblogic - web - app.
  
  If you have a JSP file that is not precompiled, compile errors
  could be shown on the browser. It is recommended to include
  verbose false > < jsp-descriptor > < < > < * *-descriptor > in weblogic.xml.
  Line no.: 2.
  2013-04-14 06:57:12 CDT: WARNING - 2: recommended child element "session-descriptor" missing under element.
  ORCL - weblogic:weblogic - web - app.
  
  You will be asked to have cookies separate way, if several
  applications are available in the same SSO session or if you
  multiple applications with different auth-method(CLIENT-CERT, FORM, BASIC)
  in the same service instance.
  Line no.: 2.
  2013-04-14 06:57:12 CDT: WARNING - Testapp.ear had 3 WARNING (s).
  
  2013-04-14 06:57:12 CDT: INFO - validate white list ended with 0 error (s) and WARNING (s) 3.
  2013-04-14 06:57:12 CDT: validation whitelist past.
  2013-04-14 06:57:12 CDT: complete "API Whitelist": status SUCCESS
  
  
  
  and error in deploy journal:
  
  2013-04-14 06:57:12 CDT: start action "deploy the Application.
  2013-04-14 06:57:12 CDT: deploy Application started
  2013-04-14 06:57:15 CDT: weblogic.application.ModuleException: could not load the webapp: Test-ViewController-context-root cause DeploymentException: java.lang.ClassNotFoundException: oracle.adf.view.faces.bi.webapp.MapProxyServlet
  2013-04-14 06:57:15 CDT: State action WL: failure
  2013-04-14 06:57:15 CDT: Action FAILED with State action WL: failure
  2013-04-14 06:57:15 CDT: see the server log of your cloud service Java for more information about the failure.
  2013-04-14 06:57:16 CDT: Application Deployment failed.
  2013-04-14 06:57:16 CDT: 'Deploy the Application' complete: FAILED status
  
  
  I use jdeveloper 11 GR 2, so pls don't tell me to use jdeveloper 11 GR 1 material. because, I hv already developed an application for my final year of Bachelor and I can't migrate to the previous version. So there is only one way for me to generate the ear file and the deployment of the console.
  
  Thus,.
  I m not getting what is the problem and what will be the solution for this?
  What should I do?
  What changes are required?
  
  Please, help me out of this problem!

  Well hosting Cloud Oracle ADF applications is for the ADF * 11.1.1-then you will not be able to deploy an application developed with * 11.1.2 thereon.
  If you don't want to revert to the version support for JDeveloper, I suggest that you look in the other accommodation options.
  For example: http://multikoop.blogspot.de/2012/09/adf-essentials-in-redhat-cloud.html

• 12 c Zip version. How to remove the console application deployment message

  I use the distribution of WebLogic 183MO zip instead of the windows installer (1.2 G) 12 c. Whenever I launched the administration console, I got the message 'console application deployment. Is it possible to get this message? In other words: could I leave the weblogic pré-déployés to start a little faster? What exactlly happens during this message that would not happen if used the distribution of the installer?

  Hello

  Go to settings in your domain, under Configuration > General there is an option "Enable deployment on-demand of internal applications. Leave this unchecked...

  See you soon,.
  Vlad

• Critical problem with planning application, deployment

  I'm working on 11.1.1.3 EPM system. using oracle 11 g database.
  The problem is:
  
  I entered the library of dimension to change aliases in the hirarchy.
  then I go to administer, library of the application, and then select deploy application
  
  enterening (9%) running application deployment mode
  and haven't for about 1 hour. I tried to restart all services.
  but the buttom of deployment become unavilabe and the application is not deployed.
  
  I have tried many soloution by modified C_Object_status EPMA OR_OBJECT, 2. but also nothing happened.
  Note that I get a backup of the production and to a new environment to fix the soloution outside production
  
  In summary,.
  deploy the button in (administer > application library) become inactive and the mismatch application

  Try the following.

  In the case of a deployment, the deployment is stopped, but the administrator cannot redeploy the application until the time-out period is exceeded. Eight hours is the default value of the timeout, but this can be changed in the AwbConfig.properties (under the WEB-INF/conf awb.war directory):

  # App Deployment timeout
  DEPLOY_PENDING_TIMEOUT_MINUTES = 10

  After reboot change epma web application services.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Exception when you run the application deployed standalone WLS

  When you run the application deployed in a standalone WLS, I get the following exception, and nothing will be displayed in the Explorer. Running-in of jdev/integratedWebLogicServer is however very well. I deployed the application in jdev to the autonomous WLS.
  

  ]] Root cause of ServletException.
  javax.faces.FacesException: oracle.adf.controller.ControllerException: ADFC-10001: cannot instantiate class 'com.oracle.pm.eai.supporttool.ui.bean.SupportToolBean'
       at oracle.adfinternal.controller.util.Utils.createAndLogFacesException(Utils.java:192)
       at oracle.adfinternal.controller.beans.ManagedBeanFactory.newInstance(ManagedBeanFactory.java:180)
       at oracle.adfinternal.controller.beans.ManagedBeanFactory.instantiateBean(ManagedBeanFactory.java:860)
       at oracle.adfinternal.controller.application.ManagedBeanELResolver.getValue(ManagedBeanELResolver.java:112)
       at javax.el.CompositeELResolver.getValue(CompositeELResolver.java:143)
       at com.sun.faces.el.FacesCompositeELResolver.getValue(FacesCompositeELResolver.java:72)
       at com.sun.el.parser.AstIdentifier.getValue(AstIdentifier.java:68)
       at com.sun.el.parser.AstValue.getValue(AstValue.java:107)
       at com.sun.el.ValueExpressionImpl.getValue(ValueExpressionImpl.java:192)
       at com.sun.faces.application.ApplicationImpl.createComponent(ApplicationImpl.java:251)
       at javax.faces.webapp.UIComponentELTag.createComponent(UIComponentELTag.java:222)
       at javax.faces.webapp.UIComponentClassicTagBase.createChild(UIComponentClassicTagBase.java:486)
       at javax.faces.webapp.UIComponentClassicTagBase.findComponent(UIComponentClassicTagBase.java:670)

  Here are the versions WLS and Jdeveloper, I used.
  WebLogic 10.3.3.0
  JDeveloper 11.1.1.3.0

  Hello

  It seems that there is something wrong with your support of bean is instantiated.
  Check that it is correctly stated in the taskFlow and you have a default constructor in your backing bean.

  Gabriel.

• OSB10gR3 - application deployment

  Hello
  
  I have my apps running on linux. Deploy the jar of my local path in windows (by accessing sbconsole through IE and deployment through import of System Administration resources). I want to know where the details of the application deployed to the OSB will be stored. I also wanted to know if the jar deployed via sbconsole... will be available in the area...
  
  Thank you
  Barros.

  Hi Baro,

  If the jar is also present in the field, or that such content as mentioned by you in the path.

  Only the content will be available on the file system and not the pot of sbconfig.

  BTW, why looking jar in the file system?

  Kind regards
  Anuj