a site and on the same pix vpn remote access

Similar Questions

• Site to Site and together on ASA 5505 VPN remote access

  Hello

  I tried to set up a VPN Site again on an ASA5505 where there already is a VPN remote on it.

  After you add the new configuration lines, I received the following message when I debug:

  04 Nov 07:06:06 [IKEv1]: group = , IP = , error QM WSF (P2 struct & 0xd91a4d10, mess id 0xeac05ec0).

  04 Nov 07:04:36 [IKEv1]: group = , IP = , peer of drop table Correlator has failed, no match!

  Someone knows what's the problem? And what to change in the config?

  Thanks in advance,

  Ruben

  Hello

  If the ASA had a remote access VPN and you add a new Site-to-Site you must make sure that the priority for the card encryption is weaker for the new Site-to - added Site.This is because otherwise traffic will always try to match the access tunnel at distance. You can check it with the command "sh run card cry"

  Federico.

• Connected to the Internet of VPN remote access VPN clients

  Greetings,

  I need to remote VPN clients to connect to the Internet from the same server VPN ASA

  "client connects to ASA the external interface VPN tunnel can access Internet from the same external interface ASA new."

  Thank you

  you need to configure "same-security-traffic permit intra-interface" on the SAA.

  Also, need to configure the relevant statements of nat for your range of pool of customers.

  i.e.

  Global 1 interface (outside)

  NAT (outside) 1 access-list anyconnectacl

  where anyconnectacl is the pool for your customers:

  permit ip 172.16.1.0 access list anyconnectacl 255.255.255.0 any

• How to activate a blocked addon or Plugin to view the Web site and content the same as IE

  I use a Java Plugin to run a java applet used to my work. Google Chrome has been recently supported by this plugin, I have clients who are unable to work in Internet Explorer and would like to offer them an alternative.

  I can only do so if all the features of my site works in Firefox. Currently, there are a few display issues experienced in Chrome and Firefox with the site. Only IE it appears correctly.

  Should this site Web the Java Deployment Toolkit plugin?
  Or just the main Java plugin?

  If the first, the best you can do is to tell your users to use 'ask to activate' for the plugin. Oracle has never corrected the flaws of Security reported with this plugin of deployment for a couple of years now; Firefox will not allow him to activate automatically when the user has even the latest, updated version of Java installed.

  Here are a few items of support that might help you a little.
  https://support.Mozilla.org/en-us/KB/how-allow-Java-trusted-sites
  https://support.Mozilla.org/en-us/KB/why-do-i-have-click-Activate-plugins

  Java is basically dead for all purposes useful otherwise than for Oracle applications. And Oracle work better on their own web browser for all platforms or Oracle business applications will appear on the tombstone with Java. I'm curious what will be their joint epitaph.

• site-to-site and browsing the internet

  Hello

  I have a simple question. We have to buy two asa5000 devices and connect them via the fixed site-to-site tunnel. One side will use the ADSL modem in Bridge mode. My plan is to use PPPoE auth on port wan asa. In addition, it is important allow users in each office to use internet (browsing) via the same port/IP, that we will use to set up a tunnel. I recall that it is possible, route them forward to the other and rule IPSec protects only the site to other traffic. Each site traffic Web will not be IPSec protected and will use the default route?

  Is it possible, theoretically at least?

  will also sometimes tunnel on the side drop ADSL IP is static but the DHCP server (allways Gets the same IP address of the DHCP server)

  TNX

  Quite possible, you can have a site to site VPN and use the same IP for Internet browsing.

  If he gets the same IP address all the time, so no, tunnel should not be.

• I have Vista Home Premium 32 bit: can I switch to a 64 bit OS and keep the same apps, hardware and software, I already have?

  I have a system of 3 GB/500 GB HD in Inspiron 530 Dell, Vista Home Premium 32-bit.  I need to restart more frequently and the system works more slower and slower... so I think the upgrade.  Can I move to a 64 bit OS in Windows 7 or 8 and keep the same hardware and software, applications that I already like Office 2007, Photoshop Elements, etc... ?  What are the benefits to 64-bit?

  Hello

  There is no way to upgrade from 32 bit to 64 bit.

  It should be down with a clean install.

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  And the Microsoft Store where you can get an idea of the price of Windows 7:

  http://www.microsoftstore.com/store/msstore/en_US/list/CategoryID.50726100

  See you soon.

• I'm in the Mexico and can browse the web but cannot get the roadrunner site to open the webmail server to allow access to e-mail.

  I'm in the Mexico and can browse the web but cannot get the roadrunner site to open the webmail server to allow access to e-mail. I worked around it through another proxy server, but navigation is a pain. does anyone know a solution to this problem? Roadrunner denies that it doesn't clog and so did the modem service here which is telmex?

  [moved]

  I had the same problem 2 weeks while in the Mexico.  I contacted the support TWC and the person to whom I spoke said he had to unlock something.  When he did, all my mail came in Outlook in the spam folder.  It was OK because I got my mail.

  I moved to a different House and now have the same problem again.  I've contacted support TWC and not had much luck. The second level support person and I spent more than an hour, the call of the Mexico using Vontage.  He has not found anything by the previous call that guided him by setting this time.  He said that he would open a ticket and call me in the next 24 to 48 hours.

  Is it reminds and solves the problem, I'll post how it was corrected.

  Amigos audio!

• about to buy a video.  It contains options for speed on the overview of the site, do get the same options to slow down the video down when I buy the video?

  about to buy a video.  It contains options for speed on the overview of the site, do get the same options to slow down the video down when I buy the video?

  The videos is not 'options '. They are exactly as described. You can use first to add slowed to any video. Correction of the one who is already slowed to normal speed may not produce get results.

  But to answer the question, the videos are exactly as in preview. It would be to you on how you change them and with which application.

• Why DW does not close after that I downloaded to my site and push the closebutton?

  Why DW does not close after that I downloaded to my site and push the closebutton?

  Hello sorent26443032,

  This kind of problem occurs usually when there are 2 cases of software are running.

  If you are on a windows machine Please make sure that there is that no duplicate instance is running in the the Task Manager for Dreamweaver.

  If you are MAC please check the same in the activity monitor.

  Concerning

  Vivek

• it crashes all the time. I just start and down, removed all the mozilla and reinstalled and still the same

  I just launch thunderbird and it crashes. I can't get an error report. I have not added any addons. and I uninstalled, reinstalled and redown loaded my gmail. and still the same.
  It says "not answered" forever

  Hold the SHIFT key and start Thunderbird and hold it down until you are prompted to enter in safe mode.

  What antivirus do you use? They have a propensity to crash Thunderbird.

• Trying to empty the trash.  After clicking on empty the trash.  An error comes up saying that this cannot be done due to the error 50.  Tried to check and repair disk permissions.  This finished.  Then tried to empty the trash again and got the same error

  I tried to empty the trash. After clicking on empty the trash. An error comes up saying that this cannot be done due to the error 50.

  Tried to check and repair disk permissions. This finished.

  Then tried to empty the trash again and got the same error 50 yet.

  I rebooted my macbook. When it restarted it flashed the apple logo, progress bar began to charge up to 15%, then the black and white code popped up for a few seconds, then a box pops up saying "your computer has restarted because of an error, press any key to restart." It is now is an endless restart loop.

  I can't go in safe mode or in disk utility.

  Any suggestions on what to try?

  Thank you

  What happens when you try to restart without danger as indicated to OS X Yosemite: start in safe mode

• photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  can I do or just wait for someone to fix it

  photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  is there anything I can do or just wait for someone to fix it?

  If you want any help here, you'll have to tell us what the error message.

  Which report you errors to?

• Can I change the new memory and at the same time to replace the Rams?

  Can I change the new memory and at the same time to replace the Rams?

  If a MacBook Pro RAM and drvie hard can be modified/improved depends on the submodel and we do not know yours. There are dozens of variations of the MacBook Pro issued since 2006, and you do not want guessing us!

  Please do "about this Mac" in your Apple menu to get this:

  

  Notice the line that I have highlighted with the red arrow. Please tell us what your computer has in the thr same place. However, do not post any serial number.

  With the exact submodel we can better advise you of any available upgrade paths.

• I want to exchange a larger HDD (Mac Pro early 2009) and at the same time improve Cougar to El Capitan.

  I want to exchange a larger HDD (Mac Pro early 2009) and at the same time improve Cougar to El Capitan. What is the best way to do it?

  I think the best would be a new installation of El Capitan on the new HD and reinstall the applications on the new HD, and then migrate the data and setting for the previous version of OSX. In this way the least unused stuff enters the new OSX version

• Is the card sim iPhone 5 c and 6 the same?

  Is the card sim iPhone 5 c and 6 the same?

  The iPhone and 5 c 6 both use cards SIM of Nano.

  Know what SIM card from your iPhone or iPad using - Apple Support