A Site with IPsec without restoring a new tunnel
Hello, I have a question about IPSec S2S.
In this topoloy, I would like to that IPSec S2S between 172.21.0.0/24 and 172.22.0.0/24.
The serial line is the first priority and route on ISP is the second priority for routing.
The question is how can I create the IPsec Site to Site connection without restore when the routing path changes?
The AR configuration:
!
version 15.1
no service the timestamps don't log datetime msec
no service timestamps debug datetime msec
no password encryption service
!
hostname AR
!
!
!
!
!
!
!
!
no ip cef
No ipv6 cef
!
!
!
username cisco password 0 BR
!
!
license udi pid CISCO2901/K9 sn FTX1524YO05
licence start-up module c2900 technology-package securityk9
!
!
!
crypto ISAKMP policy 10
BA 3des
md5 hash
preshared authentication
Group 2
!
cisco key crypto isakmp 10.0.0.2 address
address of cisco crypto isakmp 200.200.200.2 keys
!
!
!
Crypto ipsec transform-set esp-3des esp-sha-hmac TS
!
CMAP 10 ipsec-isakmp crypto card
defined peer 10.0.0.2
defined by peer 200.200.200.2
game of transformation-TS
match the vpn address
!
!
!
!
!
!
pvst spanning-tree mode
!
!
!
!
!
!
interface GigabitEthernet0/0
IP 100.100.100.2 255.255.255.252
automatic duplex
automatic speed
card crypto WCPA
!
interface GigabitEthernet0/1
IP 172.21.0.254 255.255.255.0
automatic duplex
automatic speed
!
interface Serial0/0/0
the IP 10.0.0.1 255.255.255.252
encapsulation ppp
Chap PPP authentication protocol
2000000 clock frequency
card crypto WCPA
!
interface Serial0/0/1
no ip address
2000000 clock frequency
Shutdown
!
interface Vlan1
no ip address
Shutdown
!
router ospf 1
Log-adjacency-changes
Network 10.0.0.0 0.0.0.3 area 0
network 172.21.0.0 0.0.0.255 area 0
!
router RIP
version 2
network 100.0.0.0
network 172.21.0.0
No Auto-resume
!
IP classless
!
IP flow-export version 9
!
!
list of IP - vpn access scope
IP 172.21.0.0 allow 0.0.0.255 172.22.0.0 0.0.0.255
!
!
!
!
!
Line con 0
!
line to 0
!
line vty 0 4
opening of session
!
!
!
end
Configuration of BR:
!
version 15.1
no service the timestamps don't log datetime msec
no service timestamps debug datetime msec
no password encryption service
!
hostname BR
!
!
!
!
!
!
!
!
no ip cef
No ipv6 cef
!
!
!
Cisco spends 0 username AR
!
!
license udi pid CISCO2901/K9 sn FTX1524L63A
licence start-up module c2900 technology-package securityk9
!
!
!
crypto ISAKMP policy 10
BA 3des
md5 hash
preshared authentication
Group 2
!
cisco key crypto isakmp 10.0.0.1 address
address of cisco crypto isakmp 100.100.100.2 keys
!
!
!
Crypto ipsec transform-set esp-3des esp-sha-hmac TS
!
CMAP 10 ipsec-isakmp crypto card
defined peer 10.0.0.1
defined by peer 100.100.100.2
game of transformation-TS
match the vpn address
!
!
!
!
!
!
pvst spanning-tree mode
!
!
!
!
!
!
interface GigabitEthernet0/0
IP 200.200.200.2 255.255.255.252
automatic duplex
automatic speed
card crypto WCPA
!
interface GigabitEthernet0/1
IP 172.22.0.254 255.255.255.0
automatic duplex
automatic speed
!
interface Serial0/0/0
the IP 10.0.0.2 255.255.255.252
encapsulation ppp
Chap PPP authentication protocol
card crypto WCPA
!
interface Serial0/0/1
no ip address
2000000 clock frequency
Shutdown
!
interface Vlan1
no ip address
Shutdown
!
router ospf 1
Log-adjacency-changes
Network 10.0.0.0 0.0.0.3 area 0
network 172.22.0.0 0.0.0.255 area 0
!
router RIP
version 2
network 172.22.0.0
network 200.200.200.0
No Auto-resume
!
IP classless
!
IP flow-export version 9
!
!
list of IP - vpn access scope
IP 172.22.0.0 allow 0.0.0.255 172.21.0.0 0.0.0.255
!
!
!
!
!
Line con 0
!
line to 0
!
line vty 0 4
opening of session
!
!
!
end
Thank you very much!
Although you might go this route, I wouldn't.
I would use VTI (GRE tunnels that run over IPSec) interfaces. One on the series circuit and the other on the circuit of the ISP.
You can then either use GRE KeepAlive to detect which tunnels are in place and use static routes or dynamic routing as EIGRP Protocol (put a higher value of the 'bandwidth' with the 'bandwidth' command on the favorite tunnel).
Tags: Cisco Security
Similar Questions
-
I had to completely restore my computer with a F10 restore now it wont let me not put my software on without XP Service Pack 2 when I try to load SP2 it says that there is a cryptographic error
Any ideas?
See...
Cleaning a compromised system
http://TechNet.Microsoft.com/en-us/library/cc700813.aspxFollow the instructions in this post of mine in another forum (to-the-letter & in order!) to restore your computer to a State course: http://aumha.net/viewtopic.php?f=62&t=44636
If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/xprepair/threads
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Need urgent help in the configuration of the Client VPN IPSec Site with crossed on Cisco ASA5510 - 8.2 (1).
Here is the presentation:
There are two leased lines for Internet access - a route 1.1.1.1 and 2.2.2.2, the latter being the default Standard, old East for backup.
I was able to configure the Client VPN IPSec Site
(1) with access to the outside so that the internal network (172.16.0.0/24) behind the asa
(2) with Split tunnel with simultaneous assess internal LAN and Internet on the outside.
But I was not able to make the tradiotional model Hairpinng to work in this scenario.
I followed every possible suggestions made on this subject in many topics of Discussion but still no luck. Can someone help me here please?
Here is the race-Conf with Normal Client to Site IPSec VPN configured with no access boarding:
LIMITATION: Cannot boot into any other image ios for unavoidable reasons, must use 8.2 (1)
race-conf - Site VPN Customer normal work without internet access/split tunnel
:
ASA Version 8.2 (1)
!
ciscoasa hostname
domain cisco.campus.com
enable the encrypted password xxxxxxxxxxxxxx
XXXXXXXXXXXXXX encrypted passwd
names of
!
interface GigabitEthernet0/0
nameif outside internet1
security-level 0
IP 1.1.1.1 255.255.255.240
!
interface GigabitEthernet0/1
nameif outside internet2
security-level 0
IP address 2.2.2.2 255.255.255.224
!
interface GigabitEthernet0/2
nameif dmz interface
security-level 0
IP 10.0.1.1 255.255.255.0
!
interface GigabitEthernet0/3
nameif campus-lan
security-level 0
IP 172.16.0.1 255.255.0.0
!
interface Management0/0
nameif CSC-MGMT
security-level 100
the IP 10.0.0.4 address 255.255.255.0
!
boot system Disk0: / asa821 - k8.bin
boot system Disk0: / asa843 - k8.bin
passive FTP mode
DNS server-group DefaultDNS
domain cisco.campus.com
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
object-group network cmps-lan
the object-group CSC - ip network
object-group network www-Interior
object-group network www-outside
object-group service tcp-80
object-group service udp-53
object-group service https
object-group service pop3
object-group service smtp
object-group service tcp80
object-group service http-s
object-group service pop3-110
object-group service smtp25
object-group service udp53
object-group service ssh
object-group service tcp-port
port udp-object-group service
object-group service ftp
object-group service ftp - data
object-group network csc1-ip
object-group service all-tcp-udp
access list INTERNET1-IN extended permit ip host 1.2.2.2 2.2.2.3
access-list extended SCC-OUT permit ip host 10.0.0.5 everything
list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq www
list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any https eq
list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq ssh
list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 no matter what eq ftp
list of access CAMPUS-LAN extended permitted udp 172.16.0.0 255.255.0.0 no matter what eq field
list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq smtp
list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq pop3
access CAMPUS-wide LAN ip allowed list a whole
access-list CSC - acl note scan web and mail traffic
access-list CSC - acl extended permit tcp any any eq smtp
access-list CSC - acl extended permit tcp any any eq pop3
access-list CSC - acl note scan web and mail traffic
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq 993
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq imap4
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq 465
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq www
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq https
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq smtp
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq pop3
access-list extended INTERNET2-IN permit ip any host 1.1.1.2
access-list sheep extended ip 172.16.0.0 allow 255.255.0.0 172.16.0.0 255.255.0.0
access list DNS-inspect extended permit tcp any any eq field
access list DNS-inspect extended permit udp any any eq field
access-list extended capin permit ip host 172.16.1.234 all
access-list extended capin permit ip host 172.16.1.52 all
access-list extended capin permit ip any host 172.16.1.52
Capin list extended access permit ip host 172.16.0.82 172.16.0.61
Capin list extended access permit ip host 172.16.0.61 172.16.0.82
access-list extended capout permit ip host 2.2.2.2 everything
access-list extended capout permit ip any host 2.2.2.2
Access campus-lan_nat0_outbound extended ip 172.16.0.0 list allow 255.255.0.0 192.168.150.0 255.255.255.0
pager lines 24
Enable logging
debug logging in buffered memory
asdm of logging of information
Internet1-outside of MTU 1500
Internet2-outside of MTU 1500
interface-dmz MTU 1500
Campus-lan of MTU 1500
MTU 1500 CSC-MGMT
IP local pool 192.168.150.2 - 192.168.150.250 mask 255.255.255.0 vpnpool1
IP check path reverse interface internet2-outside
IP check path reverse interface interface-dmz
IP check path opposite campus-lan interface
IP check path reverse interface CSC-MGMT
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 621.bin
don't allow no asdm history
ARP timeout 14400
interface of global (internet1-outside) 1
interface of global (internet2-outside) 1
NAT (campus-lan) 0-campus-lan_nat0_outbound access list
NAT (campus-lan) 1 0.0.0.0 0.0.0.0
NAT (CSC-MGMT) 1 10.0.0.5 255.255.255.255
static (CSC-MGMT, internet2-outside) 2.2.2.3 10.0.0.5 netmask 255.255.255.255
Access-group INTERNET2-IN interface internet1-outside
group-access INTERNET1-IN interface internet2-outside
group-access CAMPUS-LAN in campus-lan interface
CSC-OUT access-group in SCC-MGMT interface
Internet2-outside route 0.0.0.0 0.0.0.0 2.2.2.5 1
Route internet1-outside 0.0.0.0 0.0.0.0 1.1.1.5 2
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
AAA authentication enable LOCAL console
Enable http server
http 10.0.0.2 255.255.255.255 CSC-MGMT
http 10.0.0.8 255.255.255.255 CSC-MGMT
HTTP 1.2.2.2 255.255.255.255 internet2-outside
HTTP 1.2.2.2 255.255.255.255 internet1-outside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs set group5
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
Crypto map internet2-outside_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
crypto internet2-outside_map outside internet2 network interface card
Crypto ca trustpoint _SmartCallHome_ServerCA
Configure CRL
Crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca xyzxyzxyzyxzxyzxyzxyzxxyzyxzyxzy
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as
quit smoking
ISAKMP crypto enable internet2-outside
crypto ISAKMP policy 10
preshared authentication
aes encryption
md5 hash
Group 2
life 86400
Telnet 10.0.0.2 255.255.255.255 CSC-MGMT
Telnet 10.0.0.8 255.255.255.255 CSC-MGMT
Telnet timeout 5
SSH 1.2.3.3 255.255.255.240 internet1-outside
SSH 1.2.2.2 255.255.255.255 internet1-outside
SSH 1.2.2.2 255.255.255.255 internet2-outside
SSH timeout 5
Console timeout 0
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal VPN_TG_1 group policy
VPN_TG_1 group policy attributes
Protocol-tunnel-VPN IPSec
username ssochelpdesk encrypted password privilege 15 xxxxxxxxxxxxxx
privilege of encrypted password username administrator 15 xxxxxxxxxxxxxx
username vpnuser1 encrypted password privilege 0 xxxxxxxxxxxxxx
username vpnuser1 attributes
VPN-group-policy VPN_TG_1
type tunnel-group VPN_TG_1 remote access
attributes global-tunnel-group VPN_TG_1
address vpnpool1 pool
Group Policy - by default-VPN_TG_1
IPSec-attributes tunnel-group VPN_TG_1
pre-shared-key *.
!
class-map cmap-DNS
matches the access list DNS-inspect
CCS-class class-map
corresponds to the CSC - acl access list
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
CCS category
CSC help
cmap-DNS class
inspect the preset_dns_map dns
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum: y0y0y0y0y0y0y0y0y0y0y0y0y0y
: end
Adding dynamic NAT for 192.168.150.0/24 on the external interface works, or works the sysopt connection permit VPN
Please tell what to do here, to pin all of the traffic Internet from VPN Clients.
That is, that I need clients connected via VPN tunnel, when connected to the internet, should have their addresses IP NAT'ted against the address of outside internet2 network 2.2.2.2 interface, as it happens for the customers of Campus (172.16.0.0/16)
I am well aware of all involved in here, so please be elaborative in your answers. Please let me know if you need more information about this configuration to respond to my request.
Thank you & best regards
MAXS
Hello
If possible, I'd like to see that a TCP connection attempt (e.g. http://www.google.com) in the ASDM logging of the VPN Client when you set up the dynamic NAT for the VPN Pool also.
I'll try also the command "packet - trace" on the SAA, while the VPN Client is connected to the ASA.
The command format is
packet-tracer intput tcp
That should tell what the SAA for this kind of package entering its "input" interface
Still can not see something wrong with the configuration (other than the statement of "nat" missing Dynamics PAT)
-Jouni
-
I can restore a new Macbook Pro with a 128 MB flash usung a drive backup time Machine 1 TB?
My Macbook Pro 2009 with a 1 TB drive is dead. I bought a new Macbook Pro 13 "early 2015 with 128 MB of memory Flash.
How can I use the 1 TB time machine backup restore the new MAC?
Yes, but most likely you can not restore everything and will need to be selective about what should be restored because very probably a full restoration would take more than 100 GB and you need a free storage space so that you can not fill up the drive
-
I've recently updated my firefox to my laptop. No longer can I do a search with Google without getting a message that the address of the site/is not secure. How to cancel? The only search that allows me to see whatever it is is Yahoo that I prefer not to use. In addition, I have to click through a series of tabs to make sure that I know that Yahoo does not feel that the site is secure before it connects. I must tell you that I have strongly dislikes this upgrade and want to return to the old Firefox.
What is you receive the exact error message? Did you check your date and time? Refreshed Firefox? Refresh Firefox – reset the parameters and modules
-
I just got an iPhone 6 and when I plugged in my laptop, he asked if I wanted to restore my new phone. I said yes! But unfortunately chose the wrong backup restore with. Is there a way I can go back to how my phone was before?
Yes, you can as long as you understand that you will lose everything that is currently on the phone.
(1) settings > General > reset > erase content and settings
That will make the iPhone as new. Then, during the installation process it again once will ask you if you want to restore from an existing backup. You can then restore the scheduled backup.
-
How I made a gateway computer with windows xp without restore discs?
How I made a gateway computer with windows xp without restore discs?
-
How to reset the default mail program? Got msn.com. Now, I went to q.com. When I click to send e-mail to a box of 'Contact us' site web or excel sheet spread with addresses e-mail, a new msn email opens. Now, I get an error message: rundll32.exe - bad Image, followed by a message the the appklication or the DLL C:\Program FIles\MSN\MSNSharedFIles\MAILMAPI. DLL is not a valid Windows image. Please check against oyur installatiion diskette. I have msn unisnstalled.
I can access my e-mail through hotmail msn, but no linger to subscribe to msn premium.
original title: default e-mail programHi PAULKRISSEL,
This function is not supported natively in Windows. You may may find a third of the program that will change the default to q.com.
WARNING: Microsoft provides no assurance or warranty, implied or otherwise and is not responsible for the download you receive from the sites of third parties or support related to the download or the downloaded technology. If you need assistance dealing with third party technology, please contact directly the manufacturer. -
Site to site VPN question: passing a public IP with IPSEC
Hi all
I need to create a VPN tunnel site to site using IPSEC between two offices on the Internet. The offices belong to two different companies.
They gave me a series of 16 public IP addresses. One of these IP addresses is used on the ISP router and this is the next hop for my router. Another IP in the range is used on my router? s external interface (which is a Cisco 851) and he is also my site VPN endpoint. So far so good...
Here's my problem: the IP source of encrypted traffic, is a public address from within the IPs public 16 I (not the one on my router interface). The actual application that needs to send the encrypted data is a server in my local network, and it has a private IP address. The other site, expects to receive data, however, the public IP address. I used NAT between the private IP address of the server and its public IP address, but no data goes through the tunnel. Moreover, the tunnel between the two end points established without problem. The problem is that the source of my encrypted data is the public IP address and I don't know how to get through the tunnel. I enclose my router configuration.
Any help is appreciated.
The access list "natted-traffic" should say:
extended traffic natted IP access list
deny ip host 192.168.0.160 BB. ABM ABM BD
deny ip host 192.168.0.160 BB. ABM BB.BE
output
I hope this helps.
-Kanishka
-
Replace a current site with a new
Is it now possible to replace a current BC site with a new? I have a customer who wants a redone site but still has almost a year left on their hosting of BC. So I want to rethink on a temp site and then replace it. Is it possible at this time?
If Yes, what is the procedure to follow. Summer off Business Catalyst for awhile.
Hi Brad,
You must replace the files on the existing site. You could start another site, but don't transfer of billing.
Best option is to redesign the site a site of BC. Then upload all the new files on the old site and update IDs, forms/modules etc when you publish the changes.
Lynda
-
New Adobe Muse site with existing Business Catalyst modules - URGENT!
I desperately need help with this problem.
A customer asked me to redo their site and I wonder if someone can tell me if you can insert old BC modules like Blogs, forms, etc. in a newly created Web of Adobe Muse site.
The new site will replace the former site of BC once completed.
Thanks heaps!
This can be done in 2 ways:
-Use your login client to publish the window and select the url of the site that was previously used.
-Publish the new site at this url will ensure that the url of the site is the same and CMS/CRM previously created content can be used in the form of modules in the pages of Muse.
or
-Create new site and publish it as a new site
-Create modules, modules etc blogs > add to the page of Muse
-Remove the domain from the old site and add it to your new site
Thank you
Sanjit
-
Hi, is it possible to export the site with system fonts without turning the police to the image?
I arrived to the police system in Hebrew ('David' & "Aharoni") and I don't want to turn into picture when im exporting.
is this possible?
You'll want to consider using a 'Hosted Web Font. There are many free and commercial Web fonts. To use a font with Muse Web, you will need both the system/print the police and the Web. See web fonts self-hosted Add | Muse CC tutorials Adobe> for a quick video demo of the use of Web fonts.
-
Change all the templates in a site with a new model
Dear all,
My site have similar models. I just rewrite a new model that is available for all models. Could you tell me how to replace all models in my site (all .html files) with a new model?
Thanks in advance.> all .html files
Do you mean all the *.dwt files?
If you * mean that, then do the following.
1 perform a full backup of the site
2. open DW, and then create a blank HTML page (I want this page to be the)
single open page)
3. Select this site in the list site in the files Panel
4 do a find and replace to the site level to find each FORMER model name and
Replace it with the NEW name of model
5. open one of the child pages and use EDIT | Models > update all
pagesThat should do it.
--
Murray - ICQ 71997575
Adobe Community Expert
(If you * MUST * write me, don't don't LAUGH when you do!)
==================
http://www.projectseven.com/go - DW FAQs, tutorials & resources
http://www.dwfaq.com - DW FAQs, tutorials & resources
=================="langtugiangho" wrote in message
News:g1gkmm$IIT$1@forums. Macromedia.com...
> Dear all,
> My site have similar models. I just rewrite a new model that is
> available for all models. Could you tell me how to replace all
> model in
> my site (all .html files) by a new model?
> Thanks in advance.
> -
Hi again.
When I close my phone and tablet version on my site, I intend to have two large buttons at the top of the Web site that say "CLICK HERE for VERSION PHONE" AND "PRESS HERE for TABLET VERSION.
How you launch the phone and tablet with making it duplicate content?
... Make articles to submit my site with 3 different versions?
For example,.
(1) see HumboldtPitBulls.Com for some of the best traditional dogs (goes to 'normal PC version' of the website)
(2) If you are interested in seeing see some beautiful APBTs website (goes to 'version of phone' web site)
(3) If you want to learn more about the history of the old Rednose Pitbull family discover our items (goes to version 'Tablet' on the website)
Please tell me I didn't need on the 'market' all 3 versions separate. Looks like more work that simply "come see HumboldtPitBulls.Com".
Thanks again!
Hello
You can create all three layouts of your site in a single file of Muse and publish/export/upload as required. Muse generates the code to detect the device used by the user and automatically redirects to relevant content... You only need to promote the "yourbusinessname.com" and Muse handles redirection to "yourbusinessname.com/phone/" or "yourbusinessname.com/tablet/" depending on what device you use to access the site.
Please see a few resources around Muse: Designing for Devices.
http://TV.Adobe.com/watch/Muse-feature-tour/Adobe-Muse-designing-for-mobile-devices/
http://www.adobepress.com/articles/article.asp?p=2219864
http://helpx.Adobe.com/Muse/using/creating-website-mobile-devices.html
See you soon,.
Vikas
-
Hi all
I'm kind new to Cisco and I have no expertise CLI. I need to configure a VPN site-to site (IPsec tunnel) with NATing. I have already installed several L2L no need with ASDM without problem, NATing. Here's the scenario:
Site1 use 192.168.1.0/24 for all internal clients that need to connect to two hosts on the Site2.
Site1 users need to access hosts Site2 namely 192.168.25.100 and 192.168.25.101
Site2 already has a L2L with another configuration of the site for the 192.168.1.0/24 range, so they asked if I can NAT outgoing traffic on my memory of end of 172.10.25.0/24.
So all customers on 192.168.1.0/24 connect via only this VPNtunnel of Site1 to Site2 should be coordinated to 172.10.25.0/24 (one?). Now, I wonder if this can be done through ASDM and if so, how? I guess I need to do it in two steps, 1) installation of the L2L using 2) installation all necessary NAT and ACLs Wizard. I'm under Cisco ASA 5510. ver. 7.2 If not, what are the exact commands for CLI? Again once this NATing is for this VPN tunnel and I don't want Site1 (192.168.1.0/24) users to be assigned to other VPN L2L is already set up and everything related to internally.
Thanks in advance for any help/suggestions.
Yes, you are absolutely correct with all 3 instructions.
Maybe you are looking for
-
How can I test Windows 8 without losing my way back to Windows 7?
You may have found yourself on the fence about installing Windows 8, you're not sure if you like it on this system including, or not, but don't want to not lose the files you had before installing Windows 8 or must go through another reinstall proces
-
Hello I would use NIRG to connect to the remote server of doors. I have read many docs and found that, the communication with the server of doors can be done through the Client of doors. But here's my problem. I have a remote server of doors in a dif
-
I would like to reinstall Windows XP from my reinstall drive
I had a few rogue malware on my machine that I managed to take off with the help of the other members. My system is 4 years old and I think it would be really beneficial to have reinstalled Windows. I have the disc that came with my system, but are
-
Hello I know this is very basic, I ask, but I'm going crazy trying to find it. I want to draw a blank line between to LabelFieds. Something like: Label1 Label2. I know there is a function that does this, but I can't remember it and I am not able to f
-
BlackBerry Smartphones Windows live messenger
I downloaded and installed windows live messenger for a curve 8520. When I try to log on to this one, I get a message saying "Service not enabled for this handset." Can anyone give me ideas on how to solve this problem. Thank you very much.