A solve unknown error 'film compilation error.

Similar Questions

• 'Error compilation film unknown error' made or export in first or Media Encoder or

  Hi all

  I'll have made troubled and the export of which certainly is a sequence quite complex 2.5 hours of first CC 2015 and Media Encoder. I'll describe the problem, then provide my card, then describe my attempts so far solutions:

  1. The problem: try to make my outside sequence gives the error "error compiling Movie. Unkown Error"at irregular intervals, sometimes after 10 seconds and sometimes after 10 minutes of rendering. It occurs also when rendering of three subsequences that he content and when expporting media first or Media Encoder.
  2. My specs:
     

     Material - I am on Windows 10 x 64-bit on a desktop computer custom built with MSI AM3 + configuration motherboard with an AMD FX6350 3.9 GHz processor, 16 GB of RAM and a 2 GB AMD Radeon R9 380 graphics card, all current drivers.

     Software - creation and Media Encoder are defined to use the reading Mercury (GPU acceleration) engine and the composite linear color, and are both set to update to version updated for release 2015 CC.
     Sequence - I'm editing in square pixels of 1080 p AVCHD, 29.97 frames/second, 48000 Hz sampling frequency, using the only i-Frame MPEG video previews. My sequence has three subsequences, all of them contain a multicam pulling three video sources synchronized sequence (it is a composite event that was recorded live). I export in H.264 MP4 @ 10-12 Mbps with 'Match sequence settings' for the framerate, bitrate and size of the image.

  3. My attempted Solutions: , I started with the basics... Clear your cache of media, delete make files and files video preview, flatten your blocking sequences, export each subsequence individually, create a new project and import the old sequences, all this, trying to render and export between each of these steps. Frankly, I'm bad-shot in the gut. I desperately need to export this sequence successfully and there deliver my video to an audience online and from there, also create versions for DVD and Blu - Ray.

  I'm just wishing so bad for an error code, a clip defective to be identified somewhere, an Executive responsible for headaches, something. Something besides, 'film compilation error. Unknown error. »

  Grateful for any help offered by the community of users of wonderful to Adobe Premiere Pro.

  Hi Nathan,

  Sorry for your troubles. Looks like you have a sequence that should be able to be exported, but can't. To add to your frustration, the warning dialog box has no clue as to what is the error. With what is happening at random intervals, it is really difficult to solve.

  For the latter, the next release of Premiere Pro's warnings more explicit. This update is coming soon. In the meantime, let's work on the export of this sequence.

  Firstly, log a case with support. Here are the details on how to contact them.

  The first thing to look at is your system, I would say. It looks up to the requirements of the standard, however, it is quite a long sequence. If you have lots of GPU based effects and/or Lumetri effects, your VRAM might be out of memory, cancelling export and crashing with error compilation Movie.

  If it was me, my prime suspect. How do you work around that? Avoiding the GPU? In fact, Yes. It will take time for export, most certainly. This could take days. Not much you can do, unfortunately, unless you muscle your hardware. Currently, my guess is that your GPU is probably not powerful enough for what you want to do. In the project settings > general switch to software only.

  Can you avoid this in the future? Yes, with a different workflow what smart favours rendered instead of make or export at the same time with GPU based effects.

  This means that you'd have to transcode the AVCHD video to a codec chip to make and restore the effects along the way in this same codec. At the time wherever you export, you are not typing the GPU because you use files preview instead.

  Info: FAQ: how to speed up making, export or encoding?

  Thank you
  Kevin

• Fehler bei Videovorschau - Fehler beim create movies. (Error in the video Preview - 'film compilation error. Unknown error.)

  Hallo,

  ICH habe seit Kurzem problem beim Exportieren aus Premiere Pro 2015.2.

  ES opens sich ein Fenster mit found message:

  "Fehler bei Videovorschau - Fehler beim create movies. Unbekannter Fehler . »
  
  As sharps Fehlers habe ich meinen Rechner neu aufgesetzt, aber er is experienced.

  Ich weiss, wie also provozieren kann ich jetzt Aber. Wenn ich beim export die Zielbitrate [Mbps:]

  Auf unter 10 stelle tritt der Fehler auf.

  =======================================================

  Hello

  I recently problems when exporting from Premiere Pro 2015.2.

  It opens a window with the following message:

  "Error in the video Preview - 'film compilation error." Unknown error. ».

  Because of this error, I restarted my computer, but he persists.

  I know now how I can cause the error. When I export the movie and put the target bit rate [Mbit / s:]

  less than 10, the error occurs.
  
  ==========================================================
  
  Windows Pro 10
  First Pro CC 2015.2
  Intel Core i7 - 4930 K CPU 3, 40GHz
  32 GB of RAM (checked with MemTest, no error)
  NVIDIA GeForce GTX 780 (game ready Driver, Version 368.39)

  With the 2015.3 version, the problems seem to have disappeared.

• Lumetri color is "film compilation error. Unknown error' all the time...

  I have problems to compile anything if I use the Lumetri color in first Pro CC 2016 9.2.0

  If I remove all Lumetri color on all plans, it compiles without any problem. If I use any kind of color Lumetri - presets or custom color Lumetri it's for me

  "Film compilation error. Unknown error. "if I try to render or export/compile.

  It matters little if I just export from in the body or the SOUL use.

  At first I thought it might be some errors with the media, but after trying to remove the clips one by one, he always made the mistake. Finally, I removed all the effects and it worked.

  If I put Lumetri color on a single clip, it does not.

  It's very frustrating.

  My system:

  Windows Pro 10

  I7 - 4930 K 3.4 Ghz

  64 GB OF RAM

  NVIDIA GTX 570

  4 x 4 TB HARD drive

  Clips of Panasonic GH3 GH4 - GH3 vlclips and 50 1080 P the GH4 is 4K 25 p. All places on the timeline with 1080 P. 25, have made many films with mixed without any problems before - looks like this error came after the latest organization update?

  Clues?

  UPDATE: I managed to get the sequence exported using the red giant seems only instead of Lumetri. I had jumped to almost looks like after having to get used to Lumetri, which I find easier to adjust when editing. Have the old edition, but consider the upgrade to bersion last, otherwise Lumetri works more. I wonder if this could have something to do with my Nvidia driver? Old eyes do not use the GPU but only the CPU... so maybe something related to the GPU for my GTX570 driver?

  / Morten

  Just look at the GTX 570... «With 480 CUDA cores...» " ... I think that this is your problem, really.

  Plus, the recommended minimum CUDA cores is to stay more than 1,000. Simply, this card doesn't have the power to handle the most recent Lumetri. The rest of your machine looks very good, I think you just need to move up to say a 970 at least. It would balance the rest of your machine better.

  Among the major warnings of building a computer for applications video Adobe is 'balance'... with the most amazing CPU and 256 GB of RAM, but only using a disk 5400 RPM, for example, is not a machine "balanced". 570 isn't near the capacity of your machine... and PrPro... can use.

  That's why he better just software.

  Neil

• Cannot EXPORT or RENDER in PREM CC! "Film compilation error. Unknown error. »

  I use MXF PMW200 files alongside the 5 d MKiii files - I finished the change and went to render/export and it won't let me do no more! I can't change it on the software and I have a deadline in an hour.

  I just bought the software today (using the trial version and I have just FCP 7 - I get this error:)

  "Film compilation error. Unknown error. »

  Hi Jim, I contacted the guys to help Adobe directly and they took my computer to try to understand. We've been through tons of troubleshooting (I already had) and it turns that the project has to be on the local drive and associated media may still be on external HDs, it can also export to external HDs providing that the proj file is on your local drive. But if the project file is located in the same folder that the multimedia files on the external hard drive it can not restore or export - so my suggested workflow is keep the project on the local disk folder. So that each new machine I want to take the project I have to import the project into a new clean project saved to local disk. I'm used to FCP 7 and CS3, but this seems absured for me. I am disappointed with CC so far.

• Error compiling movie, unknown error, 2015.4 CC body

  So yesterday Windows installed the following updates:-update for Windows 10 Version 1607 for x 64 systems (KB3176936) - a security update for Adobe Flash Player for Windows 10 Version 1607 for x 64 systems (KB3188128) - function Windows 10 update, version 1607.

  Since this update, first Pro CC 2015.4 fails to preview rendering anything on the timeline, which gives the error "error in compilation of film. Unknown error. ».  No matter if it has video or just the bars and tone on a new timeline, same results of error.  I tried to change the codec of preview rendering, clear the database cache, restart and return under a completely new project, without success.  I don't see Adobe updates for the body from lately, so I'm stuck with this. Oddly enough, I am able to export any type of file without problem as usual.  My other versions installed in the body are also strangely affected by the same error message.  Any suggestions?  Help is very much appreciated!

  Many people, for any of you to also have this obscure problem, I think (I hope), I found a solution.  As already said, the problem seems to affect ALL versions of the body, I installed, as well as nine project files or former organization I created or modified.  That last part, however, does not seem to be the case with the project files that are opened and saved on a Mac.  When the opening of some body of old last project files saved on an iMac, my PC may suddenly noticed that again.  Better yet, by opening the project evil files I created on the PC more on a Mac computer, save the file via Mac and then reopen on the PC again also seems to solve the problem.  So far this simple and overwhelming opening on Mac seems to change something, back to normal as my body of 10 Windows cannot. I hope this helps!

• Movie compilation error. Unknown error.

  Hello

  I want to make a movie that is 10 minutes and 30 seconds of time on my Macbook. The video is 1280 x 720.

  I used to most of the video from my iPhone 6 Plus (.) MOV) and a dynamic file linked to After Effects. When I try to make it gives me the error: film compilation error. Unknown error.

  When I delete videos iPhone and restore only the After Effects file (which is also an imported and edited video iPhone at AE) he normally makes.

  What should I do?

  Convert framerate iphone images constant framerate variable with Handbrake first before importing.

• 'Error compiling movie/Unknown Error' when exported.  Great list of ' things I've already tried ' s

  Alright, move to the bottom line here, I spent the last hours 3 juggling with clips and sequences of trying to get my VERY average project to encode and export.  I get the dreaded "error compiling Movie.  Unknown error message.  But there are a few details as to where it is tripping when exporting; more on that later.

  Technical details: iMac, 32 GB of ram, Nvidia 780 M 4 GB, SSD from all around.

  First of all, a list of "Things I've tried."  Which many were inspired by multiple threads, I've already read:

  -Make sure there is not still images exceeding the size of my project (1080 p) settings.  Initially, there was one, it has since then been swapped for a completely different image/picture.  Still unresolved.

  -Make sure there is no offset image drop-down conflicts happening between clips and my settings.

  -All images is 1080 p, so there is no scale happening (not with any of the effects either).

  -Switching to export "in/out sequence" export "entire sequence."

  -Created a new sequence, dropped the sequence published in project parameters matched, tried to export from there.  Same question.

  -A tried to make CBR instead of the variable.

  -Tried to use all the rendering engines (software only, CUDA, OpenCL, etc..)

  -At least a few other things too, but it's so darn late now for this reason, and so I'm so tired that I can't remembering everything.  I'll gladly take any suggestions and report back.

  
  

  Now, I mentioned we're listening at a specific point.  I often read that he goes somewhere around 70% through and is approximately the same in my case.  He arrives at a specific clip/couple of clips and blocks in almost the exact same task.  I messed with these clips too many times to count.  Initially it has been remapped both with keyframes, so I changed it to a constant speed without keyframes. nothing.  Had a directional blur on one of the clips, so I completely; and no change.  I think I tried other things with that particular section of the timeline, but as I said, I'm falling asleep here.

  
  

  Please. Help.  I'm very, very, very close to deserting a ship to FCPX total after so many bugs and crashes (it is not the only issue that hinder the project, as many of you know).  Currently, I am a user of dual-app, different applications for projects depending on how how "inside" I need to get, or if I work with different people on different systems.  But I need something that is RELIABLE.  This is supposed to be a professional software and probably priority #1 for professionals is reliability.  At least in FCP almost everything runs very smooth, and I did not yet have a "can't f * ing finish a project" problem with her.

  I'm sorry, please excuse my behavior; I'm frustrated.

  We have progress!

  So, I've discovered some interesting things (maybe not interesting for anyone who has had or has solved this problem before, but new to me).  It is a long summary of what happened, but I want to explain how I came to the conclusion I did:

  First of all, I took advice from Colin and created a new sequence with the troublesome section, removed all the audio clips.  I thought I could try so suggestion of Ann at the same time, so I deleted FilmConvert not only the effects but ALL the effects of the clip.  The settings include: Filmconvert, directional blur (which a clip has the sum of retouching), speed of adjustment (without keyframes), then an adjustment layer with a very small amount of sharpening applied to it.  I did not remove anything from the adjustment layer.  I then exported with only "Export video" checked.  It worked.

  So, I really wanted to try to pin-point, in hopes of helping someone else in the future.  It's when things are interesting.  So I went back and started around, keeping the audio off the coast and little by little the effects removed.  He went down to the directional blur, which I completely spaced the same mention, because I forgot a little on this subject in the middle of all this (sorry about, 100% my fault not to mention blur; some of you could see as the issue immediately, had I mentioned).  With everything, but directional blur applied, it has exported.  I even put the audio tracks to, re-checked Export Audio, and everything worked well.  So the blur effect seems to be the question... or so it seems.  Another interesting thing that's happened is that for one of the first attempts to export without audio, I left the blur effect but take off FilmConvert.  It worked as well.  Finally, my last attempt was to export everything, audio and video and all the effects, however, this time I noticed that on the second clip in the sequence I had accidentally put the blur directional above FilmConvert in the effects Panel (the other clips there like the last effect applied).  So I moved it back to the bottom of the chain of effects.  Of course, it worked.

  Finally, and above all, I tried full export with effects in their place.  SOUL crashed, twice.  Frustrating, but unfortunately enough widespread lately.  However, the project is export straight out of first, first try.  Feeling very relieved.

  I guess my question now is... Why?  Is - this common with all the effects in the first of blur?  To summarize what the section of the clips looked like, it's just a quick moment of time being accelerated x 5, with a slight blur to simulate an exaggerated movement too vague.  Yes, I do usually this kind of effects in After Effects, with more control and better results, but the project is a quick and informal editing, so I don't bother at first.  A big thank you to all who contributed to the discussion, if your suggestion has directly touched the issue or not, it's the community to commit that really matters.  I hope that son like this can get small bugs like these resolved or help someone in a similar situation to learn how works the effect controls panel.  Nevertheless, there is useful information on this topic, for sure.  Thanks again to all who have helped me learn along the way.

• * Error compiling Movie - Unknown Error * when exporting/rendering.

  Whenever I try to export the media or to restore the timeline, he appears with this error. "Film compilation error. Unknown error. »

  

  As you can imagine it's very frustrating, I followed the same process accurate I always did and he have never had a problem previously. No media is missing, and I even tried to use the YouTube preset - wrong again.

  I use first Pro CC 2015 - I even tried uninstalling and reinstalling as update all the CC apps.

  If the first does not know what is the error, how am I supposed to know? Help, please!

  Error compiling movie... some debates and ideas

  -1, create a new project and import the project that has errors and see if that fixes the problem

  -http://helpx.adobe.com/premiere-pro/kb/error-compiling-movie-rendering-or.html

  - and nested sequences http://forums.adobe.com/thread/955172

  - and WMV files of http://forums.adobe.com/message/4629210 frame rate

• Cannot restore: error compiling Movie: unknown error

  Hey there,

  Need help,

  I'm working on a short sequence (15 seconds).

  It has a few stacked video channels and I have applied overlays and fixed most of the color channels.

  The film is XMF files from a C300. Sequence of parameters defined in accordance with the proposed recommendation (IE when I dropped the clips).

  I get the "error compiling Movie: unknown error" message whenever I try to make or export.» I went through a lot of steps suggested by a blog post, I found here - I went through the sequence, removed the clip, has tried to return, then removed the effects.

  When I deleted the effects and buried the clips off side by side he made out for me.  That's great, but I have to be able to export the effects all in and empty them in layers. What can I do? Starting to pull my hair!

  Details...

  CS6. O

  MacBook, 4 GB Ram,

  Graphics card: NVIDIA GeForce GT 330 M 256 MB

  Thank you,

  Simon

  Hey,.

  Thanks for the tip - tried all of those, unfortunately with no joy.

  I have not deleted my cache - also no joy.

  BUT I installed a (now 6.0.5) update and it does.

  Thanks for the help,

  Simon

• Updated from CC to CC 2015 2014 now unknown error compiling movie in SOUL

  I'm editing a project that is 720 x 576 only so no HD in question.  My PC is running Windows 10.

  I used 2014 CC and had no problem to export the project.

  I just upgraded today to CC 2015.

  Now, it is true that, after making a few changes to the project, I get the dreaded unknown error message.

  I read a lot of comments on the forums about this and what seems to be a multitude of things to look at to fix the problem.

  I did not much yet to investigate and make, but for the life of me I don't understand why the software can at least give an idea where to start.

  One solution supposed to remove the clips one at a time to determine where is the problem.

  My project has hundreds of clips, so it could take some time.

  I'm happy that I'm only using the software for a hobby rather than for a living if not I would be hot.

  Maybe someone could explain why the software can't give a clue where in the video, the error is.  Surely, he must know where is the problem. He might not know what is causing the error, but a clue as to where to look would help to solve the problem.  It seems that this error has existed for a long time, and you would have thought that adobe would have found a way now to reach a judicious system of error reporting.

  Thanks for your suggestion.

  Fortunately, I just tried the first test:

  Change the video rendering and playback the playback (Cuda) Mercury to Mercury Playback Engine software only engine

  He deleted the files of rendering.

  Then, I just did an export throughout the sequence.  Almost all of the existing sequence in the timeline showed in red that I guess that means that a majority of it is not rendered.

  The export worked perfectly without error.

• Media Encoder: Error compiling Movie - unknown error

  As the title, I have problems with Adobe Premiere Pro CC 2014 Adobe Media Encoder CC 2014 and - "Adobe Media Encoder: error compiling Movie - unknown error" appears each time I try to export my video. Both are trial versions, but my Adobe Media Encoder CC 2014 had ended and my Adobe Premiere Pro CC 2014 have left about 1 week of trial. Please help as soon as possible because I have to do a large project for my school, so cannot function without these great apps. Thank you.

  Hi Charles,

  Have you tried to export with Premiere Pro?

  Go to the file Menu in Premiere Pro > project settings > general and change 'Mercury playback engine' (if it allows) to 'Only software Mode' and then try to export from Premiere Pro.

  Mention also, what operating system are you using, hard RAM (Exxternal or internal), or several installed graphics cards and formats of files used in the project.

  Have you tried to make the scenario first before export?

  If possible send a screenshot of the full timeline.

  Vinay

• Movie compilation of MakeAudioRenderer() unknown error

  Hello

  I have compiled just the exporter SDK sample plugin and trying to export a file .sdk results in 'film compilation error. '

  It turns out that the last statement I can debug is about MakeAudioRenderer.

  In 2015 sound documentation written "the Audio Suite sequence is now in version 2, revision MakeAudioRenderer() do PrAudioChannelLabel * as a parameter."

  But here's the line of code in the plugin of the sample:

  
      mySettings->sequenceAudioSuite->MakeAudioRenderer(    exID,
                                                          exportInfoP->startTime,
                                                          (PrAudioChannelType)channelType.value.intValue,
                                                          kPrAudioSampleType_32BitFloat,
                                                          (float)sampleRate.value.floatValue,
                                                          &audioRenderID);
  

  Thanks in advance,

  Antoine.

  Hi Toinou,

  The problem of the call using version 1 of the sequenceAudioSuite of MakeAudioRenderer() is in the exporter SDK sample.

  On the acquisition/release sequenceAudioSuite in SDK_Exporter.cpp, she acquires version 2, but he then uses in its version 1 use:

  Replace:

  spError = spBasic-> () AcquireSuite

  kPrSDKSequenceAudioSuite,

  kPrSDKSequenceAudioSuiteVersion,

  const_cast (reinterpret_cast (& (mySettings-> sequenceAudioSuite)));

  with:

  spError = spBasic-> () AcquireSuite

  kPrSDKSequenceAudioSuite,

  kPrSDKSequenceAudioSuiteVersion1,

  const_cast (reinterpret_cast (& (mySettings-> sequenceAudioSuite)));

  and replace:

  If (lRec-> sequenceAudioSuite)

  {

  result = spBasic-> ReleaseSuite (kPrSDKSequenceAudioSuite, kPrSDKSequenceAudioSuiteVersion);

  }

  with:

  If (lRec-> sequenceAudioSuite)

  {

  result = spBasic-> ReleaseSuite (kPrSDKSequenceAudioSuite, kPrSDKSequenceAudioSuiteVersion1);

  }

• Video compilation error - unknown error

  Just got a PC brand new Intel i7 4790 and GTX970 GPU - copied some of my projects from my old computer and tried to return with first Pro CC v7.0. While making pop "Video compilation error unknown error" and if I try to make a second time, it freezes and finally crashes.

  Tried two hardrives (HDD/SSD), and the clips are perfectly fine since they work fine on another computer. Any help would be welcome!

  Thank you

  Solution:

  Update Windows 7 (which was a clean install) to service pack 1 - for some reason that did the job.

• "Compile error. Unknown error. "or"Multiplexing gone bad"

  Hello people,

  When I try to export my video to 4 minutes (just a simple video in 1080 p: some only clips with a soundtrack, a few titles and, despite a sometimes stabilizer no effect), a "compilation error. Unknown error "or a"multiplexing has failed-error"occurs. For me, it seems that the program chooses just one of two errors, so there will be no export my file... I can't find a reason for these errors.

  I don't know how to get rid of the error division multiplexing (only export the video or audio), but as soon as I get rid of this error, the compilation error occurs, and I don't know how to get rid of that one... I advised Adobe page on the compile error, but none of the advice they gave worked for me...

  I decided to restart the editing of the video. This time that I exported every time after I was 30-second edition. It worked twice (so that total I 1 minute exported), but the third time the error reappears. I removed the third 30 seconds I edited (so I had left only 1 minute again), and I've tried if the first 30 sec still wanted to export. But this time, guess what, errors have come to the top and it wouldn't export... PE will not export the exact same files as it has exported before more!

  I think, something is wrong in the program itself, but tproblem could my computer als. Sometimes while editing a "Premiere Elements has stopped working - popup" appears and then I have no choice but to close the program (what is a sign of a bad work computer?). And tproblem that it could even be forced by me, something wrong...

  
  

  Anyone know anything about these errors and how to heal?

  
  

  Looking forward to your reply!

  
  

  By the way: English is not my mother tongue, so don't go and hate on my English please!
  

  02010 m

  Your English is very good. But we need more details. We understand the problem you have described.

  1. what version of Premiere Elements and on what operating system works - it?

  2. What are the properties including the extension of what you put on your project timeline?

  What have you (manually) or project (automatically) defined as a project preset to match the properties of your media source on the Timeline?

  3. What is your intended export - version 13/13.1 if, Publish + share/computer/and then what? And what you define as the pre-selection for export? You use the default settings of the selected preset, or customize the selected have been preset on his tab multiplexer tab button and advanced video, Audio tab? What are your settings tab multiplexer?

  4. have you developed the timeline to help - + cursor above the timeline and looked for irregularities in all tracks (used or others that you feel is not used).

  a. gaps in the timeline summary

  b. debris (remains) scattered around the content of the tracks

  placement of c. of video and/or audio transitions, titles

  I guess there is no marker menu timeline or movie Menus involved in all this. I guess correctly?

  Before we get to the point where we suggest program uninstall / free ccleaner Cross (parts regular and register), reinstall it with antivirus and firewall disabled, let us

  a. make sure that the structure of the timeline has no flaws inside

  b. determine if delete the parameter of the item first (Adobe Premiere elements Prefs) editor has an impact on one of the problems you described

  If Windows 7, 8 or 8.1 64-bit

  Local disk C

  Users

  Owner

  AppData

  Roaming

  Adobe

  First Elements

  Version number

  and in the version number the Adobe Premiere elements Prefs file folder that you delete... If that does not work, delete the record of the number of full version in which Adobe Premiere elements Prefs file exists. Be sure to work with folder Option show hidden files, folders and drives on.

  Please review and consider, and then we can try to put all the information together to find a solution consistent with the problems.

  Thank you.

  RTA