Cannot restore: error compiling Movie: unknown error

Similar Questions

• Media Encoder: Error compiling Movie - unknown error

  As the title, I have problems with Adobe Premiere Pro CC 2014 Adobe Media Encoder CC 2014 and - "Adobe Media Encoder: error compiling Movie - unknown error" appears each time I try to export my video. Both are trial versions, but my Adobe Media Encoder CC 2014 had ended and my Adobe Premiere Pro CC 2014 have left about 1 week of trial. Please help as soon as possible because I have to do a large project for my school, so cannot function without these great apps. Thank you.

  Hi Charles,

  Have you tried to export with Premiere Pro?

  Go to the file Menu in Premiere Pro > project settings > general and change 'Mercury playback engine' (if it allows) to 'Only software Mode' and then try to export from Premiere Pro.

  Mention also, what operating system are you using, hard RAM (Exxternal or internal), or several installed graphics cards and formats of files used in the project.

  Have you tried to make the scenario first before export?

  If possible send a screenshot of the full timeline.

  Vinay

• Try to restore my iPhone and I get the message "Cannot restore iPhone because an unknown error (50)." I got this message several times, how to fix?

  Try to restore my iPhone and I get the message "Cannot restore iPhone because an unknown error (50)." I can't chat because the phone is locked and I can not access my serial number. I got this message several times, how to fix?

  Have you already checked this discussion about this?

  The iPhone cannot be synced. An unknown error occurred (-50)

• * Error compiling Movie - Unknown Error * when exporting/rendering.

  Whenever I try to export the media or to restore the timeline, he appears with this error. "Film compilation error. Unknown error. »

  

  As you can imagine it's very frustrating, I followed the same process accurate I always did and he have never had a problem previously. No media is missing, and I even tried to use the YouTube preset - wrong again.

  I use first Pro CC 2015 - I even tried uninstalling and reinstalling as update all the CC apps.

  If the first does not know what is the error, how am I supposed to know? Help, please!

  Error compiling movie... some debates and ideas

  -1, create a new project and import the project that has errors and see if that fixes the problem

  -http://helpx.adobe.com/premiere-pro/kb/error-compiling-movie-rendering-or.html

  - and nested sequences http://forums.adobe.com/thread/955172

  - and WMV files of http://forums.adobe.com/message/4629210 frame rate

• 'Error compiling movie/Unknown Error' when exported.  Great list of ' things I've already tried ' s

  Alright, move to the bottom line here, I spent the last hours 3 juggling with clips and sequences of trying to get my VERY average project to encode and export.  I get the dreaded "error compiling Movie.  Unknown error message.  But there are a few details as to where it is tripping when exporting; more on that later.

  Technical details: iMac, 32 GB of ram, Nvidia 780 M 4 GB, SSD from all around.

  First of all, a list of "Things I've tried."  Which many were inspired by multiple threads, I've already read:

  -Make sure there is not still images exceeding the size of my project (1080 p) settings.  Initially, there was one, it has since then been swapped for a completely different image/picture.  Still unresolved.

  -Make sure there is no offset image drop-down conflicts happening between clips and my settings.

  -All images is 1080 p, so there is no scale happening (not with any of the effects either).

  -Switching to export "in/out sequence" export "entire sequence."

  -Created a new sequence, dropped the sequence published in project parameters matched, tried to export from there.  Same question.

  -A tried to make CBR instead of the variable.

  -Tried to use all the rendering engines (software only, CUDA, OpenCL, etc..)

  -At least a few other things too, but it's so darn late now for this reason, and so I'm so tired that I can't remembering everything.  I'll gladly take any suggestions and report back.

  
  

  Now, I mentioned we're listening at a specific point.  I often read that he goes somewhere around 70% through and is approximately the same in my case.  He arrives at a specific clip/couple of clips and blocks in almost the exact same task.  I messed with these clips too many times to count.  Initially it has been remapped both with keyframes, so I changed it to a constant speed without keyframes. nothing.  Had a directional blur on one of the clips, so I completely; and no change.  I think I tried other things with that particular section of the timeline, but as I said, I'm falling asleep here.

  
  

  Please. Help.  I'm very, very, very close to deserting a ship to FCPX total after so many bugs and crashes (it is not the only issue that hinder the project, as many of you know).  Currently, I am a user of dual-app, different applications for projects depending on how how "inside" I need to get, or if I work with different people on different systems.  But I need something that is RELIABLE.  This is supposed to be a professional software and probably priority #1 for professionals is reliability.  At least in FCP almost everything runs very smooth, and I did not yet have a "can't f * ing finish a project" problem with her.

  I'm sorry, please excuse my behavior; I'm frustrated.

  We have progress!

  So, I've discovered some interesting things (maybe not interesting for anyone who has had or has solved this problem before, but new to me).  It is a long summary of what happened, but I want to explain how I came to the conclusion I did:

  First of all, I took advice from Colin and created a new sequence with the troublesome section, removed all the audio clips.  I thought I could try so suggestion of Ann at the same time, so I deleted FilmConvert not only the effects but ALL the effects of the clip.  The settings include: Filmconvert, directional blur (which a clip has the sum of retouching), speed of adjustment (without keyframes), then an adjustment layer with a very small amount of sharpening applied to it.  I did not remove anything from the adjustment layer.  I then exported with only "Export video" checked.  It worked.

  So, I really wanted to try to pin-point, in hopes of helping someone else in the future.  It's when things are interesting.  So I went back and started around, keeping the audio off the coast and little by little the effects removed.  He went down to the directional blur, which I completely spaced the same mention, because I forgot a little on this subject in the middle of all this (sorry about, 100% my fault not to mention blur; some of you could see as the issue immediately, had I mentioned).  With everything, but directional blur applied, it has exported.  I even put the audio tracks to, re-checked Export Audio, and everything worked well.  So the blur effect seems to be the question... or so it seems.  Another interesting thing that's happened is that for one of the first attempts to export without audio, I left the blur effect but take off FilmConvert.  It worked as well.  Finally, my last attempt was to export everything, audio and video and all the effects, however, this time I noticed that on the second clip in the sequence I had accidentally put the blur directional above FilmConvert in the effects Panel (the other clips there like the last effect applied).  So I moved it back to the bottom of the chain of effects.  Of course, it worked.

  Finally, and above all, I tried full export with effects in their place.  SOUL crashed, twice.  Frustrating, but unfortunately enough widespread lately.  However, the project is export straight out of first, first try.  Feeling very relieved.

  I guess my question now is... Why?  Is - this common with all the effects in the first of blur?  To summarize what the section of the clips looked like, it's just a quick moment of time being accelerated x 5, with a slight blur to simulate an exaggerated movement too vague.  Yes, I do usually this kind of effects in After Effects, with more control and better results, but the project is a quick and informal editing, so I don't bother at first.  A big thank you to all who contributed to the discussion, if your suggestion has directly touched the issue or not, it's the community to commit that really matters.  I hope that son like this can get small bugs like these resolved or help someone in a similar situation to learn how works the effect controls panel.  Nevertheless, there is useful information on this topic, for sure.  Thanks again to all who have helped me learn along the way.

• Error compiling movie, unknown error, 2015.4 CC body

  So yesterday Windows installed the following updates:-update for Windows 10 Version 1607 for x 64 systems (KB3176936) - a security update for Adobe Flash Player for Windows 10 Version 1607 for x 64 systems (KB3188128) - function Windows 10 update, version 1607.

  Since this update, first Pro CC 2015.4 fails to preview rendering anything on the timeline, which gives the error "error in compilation of film. Unknown error. ».  No matter if it has video or just the bars and tone on a new timeline, same results of error.  I tried to change the codec of preview rendering, clear the database cache, restart and return under a completely new project, without success.  I don't see Adobe updates for the body from lately, so I'm stuck with this. Oddly enough, I am able to export any type of file without problem as usual.  My other versions installed in the body are also strangely affected by the same error message.  Any suggestions?  Help is very much appreciated!

  Many people, for any of you to also have this obscure problem, I think (I hope), I found a solution.  As already said, the problem seems to affect ALL versions of the body, I installed, as well as nine project files or former organization I created or modified.  That last part, however, does not seem to be the case with the project files that are opened and saved on a Mac.  When the opening of some body of old last project files saved on an iMac, my PC may suddenly noticed that again.  Better yet, by opening the project evil files I created on the PC more on a Mac computer, save the file via Mac and then reopen on the PC again also seems to solve the problem.  So far this simple and overwhelming opening on Mac seems to change something, back to normal as my body of 10 Windows cannot. I hope this helps!

• Error compiling Movie - unknown error

  This issue is constantly perform when rendering and export since the last CC of first pro version. My colleague is having the same problem and we are working on different computers and different projects. We don't have this problem when we turn off the acceleration GPU (CUDA) Mercury playback engine. Not a great solution since it slows down the editing process considerably! Everyone knows about this issue and know a better solution? Thank you!

  According to my experience, there are a number of things you should try when this error message. Start with the most basic.

  -Restart the Prime Minister

  -check you have enough memory and/or close any other programs you have running which can be slow things.

  -Tinker with gpu and rendering parameters.

  -reboot the machine a couple of times

  -Try to copy your clips of the entire sequence in a new sequence with the same settings (make sure that they match your capture) obvs.

  -Try rendering/export spare parts of the sequence, so it will be rendering/export some part but not one another is almost certainly a little problem with an applied effect or a particular clip. half and half new etc until that you locate the clip of problem. delete this sucker and reinsert.

  -Open a new project and import the entire project of the former. It worked for me in the past too.

  Hope these helps. Try them all!

  Adobe, people depend on your software for a living. ADDRESS THIS ISSUE. It is a nightmare and has lost me days and days of time. It seems that other users are more knowledgeable about this than the creators of software. Why is this? We pay a lot of money for your programs and get the useless media problems of this kind.

• Error compiling Movie.  Unknown error.  Premiere Pro export failed

  Error compiling Movie.  Unknown error.  I get this message when you try to export my calendar to any format.  It exports for a while, then I get this message.  When I try to export using the media encoder it gives me just the sound of sheep.  I'm starting to hate this sheep.

  Does anyone know how to figure out why it throws up to this error message, and that the solution is to go around?  I've lost countless hours trying to figure out a work around.  I can't just scrap the project, it took me weeks.

  I was able to export fine dozens of times before, so I'm not sure it's important that my features are but here goes:

  Custom PC integrated with windows 7pro SP1

  Intel Core i7 - 2600 K CPU @ 3.7 GHz 3.4GHz

  16 GB of ram

  64-bit operating system

  After the implementation of many suggestions here, I was able to export the project 9 min successfully.  I need to take you all at dinner.

  I don't know what suggestions has been around, but I have a feeling that it was a combination of ideas that went around.  Here's a breakdown of what I did to change the project so that it can successfully export:

  1.) reset all stills in motion tab to its original settings & then click right on it in the timeline panel and choose 'to scale to the size of the image.

  2.) replaced all files nested with the original tracks.

  3.) changed the sequence settings (changed under subsection video previews and editing custom Mode > select the File Format as Microsoft AVI, uncompressed Codec Preview.)

  I had to make a new render all previews after changing the settings of the sequence, and I had i/o errors while the process, but Adobe first CC of reboot resolved somehow these errors.  Several times during the editing process of the chronology (based on items 1-3) previously mentioned I had to reboot first due to a loss of the preview screen and inability to make things.  At the end of the day, I could so that he could succeed export so again once I thank you all.  It's a VERY important project for me and I'm serious about you take all this at dinner

• 'Error compilation film unknown error' made or export in first or Media Encoder or

  Hi all

  I'll have made troubled and the export of which certainly is a sequence quite complex 2.5 hours of first CC 2015 and Media Encoder. I'll describe the problem, then provide my card, then describe my attempts so far solutions:

  1. The problem: try to make my outside sequence gives the error "error compiling Movie. Unkown Error"at irregular intervals, sometimes after 10 seconds and sometimes after 10 minutes of rendering. It occurs also when rendering of three subsequences that he content and when expporting media first or Media Encoder.
  2. My specs:
     

     Material - I am on Windows 10 x 64-bit on a desktop computer custom built with MSI AM3 + configuration motherboard with an AMD FX6350 3.9 GHz processor, 16 GB of RAM and a 2 GB AMD Radeon R9 380 graphics card, all current drivers.

     Software - creation and Media Encoder are defined to use the reading Mercury (GPU acceleration) engine and the composite linear color, and are both set to update to version updated for release 2015 CC.
     Sequence - I'm editing in square pixels of 1080 p AVCHD, 29.97 frames/second, 48000 Hz sampling frequency, using the only i-Frame MPEG video previews. My sequence has three subsequences, all of them contain a multicam pulling three video sources synchronized sequence (it is a composite event that was recorded live). I export in H.264 MP4 @ 10-12 Mbps with 'Match sequence settings' for the framerate, bitrate and size of the image.

  3. My attempted Solutions: , I started with the basics... Clear your cache of media, delete make files and files video preview, flatten your blocking sequences, export each subsequence individually, create a new project and import the old sequences, all this, trying to render and export between each of these steps. Frankly, I'm bad-shot in the gut. I desperately need to export this sequence successfully and there deliver my video to an audience online and from there, also create versions for DVD and Blu - Ray.

  I'm just wishing so bad for an error code, a clip defective to be identified somewhere, an Executive responsible for headaches, something. Something besides, 'film compilation error. Unknown error. »

  Grateful for any help offered by the community of users of wonderful to Adobe Premiere Pro.

  Hi Nathan,

  Sorry for your troubles. Looks like you have a sequence that should be able to be exported, but can't. To add to your frustration, the warning dialog box has no clue as to what is the error. With what is happening at random intervals, it is really difficult to solve.

  For the latter, the next release of Premiere Pro's warnings more explicit. This update is coming soon. In the meantime, let's work on the export of this sequence.

  Firstly, log a case with support. Here are the details on how to contact them.

  The first thing to look at is your system, I would say. It looks up to the requirements of the standard, however, it is quite a long sequence. If you have lots of GPU based effects and/or Lumetri effects, your VRAM might be out of memory, cancelling export and crashing with error compilation Movie.

  If it was me, my prime suspect. How do you work around that? Avoiding the GPU? In fact, Yes. It will take time for export, most certainly. This could take days. Not much you can do, unfortunately, unless you muscle your hardware. Currently, my guess is that your GPU is probably not powerful enough for what you want to do. In the project settings > general switch to software only.

  Can you avoid this in the future? Yes, with a different workflow what smart favours rendered instead of make or export at the same time with GPU based effects.

  This means that you'd have to transcode the AVCHD video to a codec chip to make and restore the effects along the way in this same codec. At the time wherever you export, you are not typing the GPU because you use files preview instead.

  Info: FAQ: how to speed up making, export or encoding?

  Thank you
  Kevin

• iPhone 6s more stuck in the mode of the brick after downloading ios10. Cannot restore via iTunes. error 3014

  iPhone 6s more stuck in the mode of the brick after downloading ios10. Cannot restore via iTunes. error 3014

  After the update to ios10, my 5s iPhone seems to work very well. I reconnected it to iTunes and then it bricked, and I panicked.

  iTunes synced a couple of times, it took about an hour and a half for me. After that it stopped its cycle of synchronization, I unplugged my iPhone - it still bricked. I then did a hard reset and it worked.

  Maybe I got lucky, maybe my iPhone and iTunes need a kick in their buttocks.

• When I try to open an attachment I "Download cannot be saved, because an unknown error occurred."

  Title says it all. If I try "to open" an attachment, the download dialog appears, and the progress bar begins to fill, then it should be full I get the message:

  "The download cannot be saved because an unknown error occurred
  

  Please Try Again. »

  I can always save the files, but then I have to delete them (and it's just a hassle). Any help would be appreciated!

  Do not have an anti-virus. However, I understood what the problem was!

  It seems that he was not really affecting all attachments, simply *.pdf files (I did not know it since I usually get pdf attachments only).

  The problem is that my default pdf reader has been set on a plug-in that was not working. I changed it and all is well.

• Cannot restore the iPad 2 9 error message

  When I start my iPad 2, I get an image that tells me to connect it to iTunes. When I log in, it says that the iPad can not be updated and must be restored to factory settings. After a while, it shows iPad Recovery Mode. waiting on ipad answer. When it comes to the point where he says, 'iPad could not be restored. An unknown error has occurred. (-9)"

  I also received a message that says "the server to update iPad software could not be contacted. An unknown error has occurred. (-18)". There, can someone help me please?

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

  Get help with iOS update or restore errors - Apple Support

• error code if poster cannot restore system

  cannot restore the computer to a date or a previous pint

  cannot restore the computer to a date or a previous pint

  Without knowing what is the error code or error message, I suggest that you try again in safe MODE.

  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and select Safe Mode.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Cannot restore backup files. Error: delete the Mediaid.bin file.

  Original title: cannot restore the backup of the external hard drive files. Converted from Vista to Windows 7. Download error concerning "" folder Mediaid.bin which must be removed before I can restore the files. Help!

  Cannot restore the backup of the external hard drive files. Converted from Vista to Windows 7. Download error concerning "" folder Mediaid.bin which must be removed before I can restore the files. Help!

  Hello

  Follow the steps given by Ki Chi Leung on 22 rd February 2010 at 16:07 in http://social.answers.microsoft.com/Forums/en-US/w7performance/thread/5e368f95-5142-4b9f-afb2-ccff9b646433

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error compiling Movie

  I used CC for a year now, updated regularly and have never had this problem when rendering. This message appears:

  Movie compilation error.

  Export error.

  Error rendering completion.

  Writing with the exporter: MPEG overview

  Writing to the file: \\?\D:zAdobe_Edit_Files (by car) \Demos\WaitEnabled\Adober Premiere Pro Video Previews\WaitEnabled.PRVzRendered - cf67f8e5-5e60-4906-8045-7761fb79d4ea.mpeg

  Write file type: MPEG

  Around the time code: 00:00:09:18 - 00:00:10:01

  Component: MPEG overview of exporting type

  Selector: 9

  Error code:-2147287036

  I don't know what is the issue.

  Error compiling movie... some debates and ideas

  May be due. on behalf of https://forums.adobe.com/thread/2166620

  -1, create a new project and import the project that has errors and see if that fixes the problem

  -http://helpx.adobe.com/premiere-pro/kb/error-compiling-movie-rendering-or.html

  - and a long discussion https://forums.adobe.com/thread/1240823