A stand-alone 1252 can be converted to AP light?

Similar Questions

• Mode conversion controller in stand-alone mode in cisco 1702

  I have cisco AP 1702 and in controller mode. I don't have the controller so want to convert in stand-alone mode. I went through various items for this and found this interesting way to do.

  Run this command to convert:

  # swarm - Standalone mode
  # reload

  I found this on this link: http://community.arubanetworks.com/t5/Controller-less-WLANs/How-to-conve...

  Similarly, going through the longer process, I downloaded this for the standalone mode: https://software.cisco.com/download/release.html?mdfid=286281141&flowid=...

  and for stand-alone mode, I have this one: https://software.cisco.com/download/release.html?mdfid=286281141&flowid=...

  Here are the files I'm looking for?

  Help, please.

  This original link can cause a headache for an Aruba AP which is different.

  Try this method:

  https://ripplesinharmony.WordPress.com/2013/01/28/downgrading-a-Cisco-lightweight-AP-to-autonomous-mode/

  The software of the first link you posted (https://software.cisco.com/download/release.html?mdfid=286281141&flowid=71622&softwareid=284180979&release=15.3.3-JC1&relind=AVAILABLE&rellifecycle=ED&reltype=latest) will work for the standalone mode (stand-alone).

  This second link is light which means the controller-based and you don't want that for this scenario.

  See you soon,.

  Ric

• Change IOS on AP 1131AG light to stand alone

  Hi experts,

  can anyone advice if the ap 1131ag IOS can be changed to stand alone? can you give me a link where I could get a standalone IOS and how? Thank you!

  Follow these steps to return mode LWAPP stand-alone mode by loading a version of Cisco IOS using a TFTP server:

  Step 1 the IP address of the computer on which the server software runs TFTP should range from 10.0.0.2 to 10.0.0.30.

  Step 2 make sure the PC contains the file access point (for example, c1200-k9w7 - tar.122 - 15.JA.tar for a 1200 Series access point) in the TFTP server folder and the TFTP server is activated.

  Step 3 set the timeout on the TFTP server in 30 seconds.

  Step 4 on the PC where, the TFTP server perform the following steps:

  a. disable the firewall, such as Windows, ZoneAlarm firewall firewall software, McAffee firewall or other.

  b. ensure that all Windows are visible. In Windows Explorer, click Tools > Folder Options > view. Deselect hide them extensions of known file types check box.

  Step 5, rename the access point image file in the folder of the server TFTP c1200-k9w7 - tar.default for a series of 1200 access point, c1130-k9w7 - tar.default for a series of 1130 access point, c1240-k9w7 - tar.default for a 1240 series access point and c1250-k9w7 - tar.default for a 1250 series access point.

  Step 6 connect the PC to the access point using an Ethernet category 5 cable (CAT5).

  Step 7 disconnect the power to the access point.

  Step 8 push the MODE button and hold the button while you reconnect power to the access point.

  Step 9 hold the MODE button until the status LED turns red (approximately 20 to 30 seconds), then release.

  Step 10 wait until restarting access point, as indicated by the LEDs become green followed the status LED flashes green.

  Step 11 after the access point reboots, reconfigure using the GUI or the CLI.

• Error LR 6.3 - > 6.5 Stand Alone Mac update

  I get the following error message when you try to update LR 6.3. -> 6.5 mac stand alone version (not CC) running under Yosemite 10.10.5.

  I downloaded the file dmg here: Install Photoshop Lightroom I thought stand-alone for the LR update version, but when the update runs looks, she strives to update the CC version. See the first screen enter:

  

  So, this is the error message I get:

  

  If this isn't the correct update to6.5 for the stand-alone version can someone point to download?

  Please uninstall Lightroom 6 of your machine. See, How do I manually uninstall the Lightroom ( only 5 Lr and Lr 6 slots are the same )

  Now re - download and reinstall Lightroom 6 and refresh to: Install Photoshop Lightroom

• VM Converter Standalone can convert a vm running on a standalone ESX 2.5.5 server directly to a stand-alone server ESX 4.1?

  Based on documents - VMConverter http://www.VMware.com/PDF/convsa_43_guide.PDF

  Destinations and source pages 22-26 - supported

  VM Converter Standalone 4.3 v can convert a vm running on a standalone ESX 2.5.5 server directly to a stand-alone server ESX 4.1? It appears that it can in the guide. Is this correct?

  VM Converter Standalone cannot convert a power off vm on an ESX 2.5.5 standalone server directly to the ESX Server 4.1 by guide unless the 2.5.5 ESX Server is managed by vCenter 2.5. Is this correct?

  Please confirm. There is some contention about this topic with their peers.

  All points will be awarded.

  Thank you.

  According to the documentation you can hot covert one ESX 2.5.X, if you manage the ESX with Virtual Center 2.5 or higher server.

• Can I convert my license creative cloud in a stand-alone license for Lightroom?

  Hello

  After a few months, I realized that I have one license per month. I really want to buy a stand-alone license and have my own software. What can I do? Thank you

  Hi clap

  CC of Lightroom is based subscription product that comes with Photoshop in photography Package(or any other plan)

  It can not be changed for a stand-alone product

  A product independent 6 Lightroom is available Separately.See products

  Let us know if this helps

  Concerning

  ~ Assani

• I have a lightroom stand-alone version 6 on my desk and want to install on my laptop. Any advice on if/how this can be done?

  I've recently updated on a Canon 5 d R to see that Lightroom 5 did not recognize the files. I bought and installed Adobe a stand-alone Lightroom 6 on my desktop and this version works fine with the new camera. I want to install a copy of Lightroom 6 on my laptop, so that I can use it when traveling. However, I was not able to know how to proceed, despite a lifetime of research on Adobe's Web site. Does anyone know how (or if) this can be done?

  The server may be busy. Try again later. Or download the trial of creative cloud and serialize as a standalone application.

  How to convert a trial CC 6 Lightroom Lightroom

• RedHat 5 video failure using stand-alone converter

  I'm running a 64-bit Redhat Enterprise Server and P2V trying it.

  Converter using Stand Alone Client 4.01. Build 161434

  Server ESXi Version 4.1.0

  She will run and do not reach 1% with the "FAILED: methodfault.summary" error.

  On the server, it registered the fault as:

  Warning message on RedHat: insufficient video RAM. The maximum resolution of the virtual

  machine will be limited to 1176 x 885. To use the configured maximum resolution of 2560 x 1600,

  increase the amount of video memory allocated to this virtual machine by setting svga.vramSize = "16384000"

  in the virtual machine configuration file. WARNING 11/29/2012 14:30:08 RedHat root

  When this does not work it will remove the virutal machine and there is no file settings to update.

  Any ideas how to make this work?

  Thank you!

  If you have a Windows machine, you can try to use the converter 5.0.1.

• I need the Java Player for firefox on a stand-alone computer without internet access. I have internet access on another computer. How can I do this?

  I have a stand-alone computer (no internet access) with firefox to run the Java Player. I have internet access on another computer in order to download files and hover over things to the stand-alone computer to install. That do and where can I download and how I install on the stand-alone computer.

  Thank you

  Leroy

  Hi, to get the Offline Installer that you can use on the computer without internet access, please visit https://java.com/en/download/help/windows_offline_download.xml

• How can I get Web sites to open in the stand-alone windows instead of all stacked in a single window?

  If I have a window open and click a link to open another, they pile up in one window instead of opening a new stand-alone window. How can I change this?

  Open options
  Tabs
  Top box uncheck the box which

• How can I control external devices using a stand-alone touchscreen with a LabVIEW app

  For my senior project my group design and created a vehicle for extended range hybrid with 90 Li + battery which is charged by a 15 kW generator and/or who is also charged by a 5 kW fuel cell. Currently, our system is able to measure the tension on batteries and display them on a laptop via LabVIEW. To process these data, we use a cRIO FPGA. What we would like to do now, is having a touch screen for the pilot to choose which loads of source of battery power so that monitor a pressure reading from the fuel tank.

  What kind of touch screens to LabVIEW to be downloaded on and used for controls?

  A cRIO has the necessary capacity to supply such a screen and handle the transfer of the data from the sensor fuel and relay (for turning on and off will deepen)?

  Do I need an additional license to create stand-alone applications and how I would go about creating a stand-alone application?

  Sorry for the question as much. Any help with the answer. Thank you!

  This looks like a very interesting project.  If you are interested, National Instruments organizes an contest of Design student where you can win cash or a trip to Austin for NIWeek.

  steve215 wrote:

  What kind of touch screens to LabVIEW to be downloaded on and used for controls?

  NEITHER sells computers touch screen that can be used to control LabVIEW applications.  You can find more information here: HMIS and industrial touch panels and here: LabVIEW Real-time and Touch Panel Deployment and replication resources. Our computers 6-inch touchscreen , run Windows CE, programming on them is a little different from the programming on a full Windows operating system.  You can find useful getting started with LabVIEW Touch Panel Module .

  You can use third-party with the LabVIEW Touch Panel Module devices, although it takes a deployment license for it.  More information can be found in the getting started guide.

  If you were able to send the information of cRIO on a network (which according to your description, seems unlikely), you can use a smartphone to control your application.  More information on our community of Smartphone group.

  steve215 wrote:

  A cRIO has the necessary capacity to supply such a screen and handle the transfer of the data from the sensor fuel and relay (for turning on and off will deepen)?

  If you use the 6-inch touchscreen panels, they need 18 to 32 VDC (the fuse becomes an open circuit if the input level exceeds 33 VDC).  The transfer of data from the switching relay can be monitored and changed with the touch screen.

  steve215 wrote:

  Do I need an additional license to create stand-alone applications and how I would go about creating a stand-alone application?

  If you have traveled the road of the touch panel, you need to purchase the LabVIEW Touch Panel Module and a touchscreen.  Touchscreens OR have a touch panel deployment license.  Guides step by step to create the stand-alone application are in the getting started with LabVIEW Touch Panel Module .

  Kind regards

  Elizabeth K.

  National Instruments | Sales engineer | www.NI.com/support

• Where can I download the stand-alone installer for .NET Framework 1.0 to 4.0 for Windows XP SP3 x 86

  I would like to download full standalone installer for Windows XP and Vista x 86 for Net Framework 1 to 4. If anyone can provide the links for XP and Vista x 86 it would be appreciated.

  Hi Victor Moreau.

  Thanks for posting in the Microsoft Community.

  I understand that you want to download the stand-alone installer for .NET Framework 1.0 to 4.0 for Windows XP SP3 x 86.

  I suggest you download links to install older versions of .NET:http://www.microsoft.com/net/download

• I have a (AIR-LAP1131AG-A-K9), I can set it up as a stand-alone?

  I have a lightweight access point (AIR-LAP1131AG-A-K9). I would like to use it as a stand-alone gateway (AIR-AP1131AG-A-K9). Is this possible? There are configuration changes that need to happen to make this happen? Do I need to use different operating system?

  Thank you

  Siva

  Plug the AP directly on your PC not the router.

  The best way to proceed is to comfort in the AP and make sure that the

  AP can reach the laptop via a switch or a crossover cable

  fixing directly from the laptop and the AP.

  With your cable from the console, you will be able to see if you pressed on the

  button for 20 seconds.

  By using a TFTP server to revert to a previous version

  Follow these steps to return standalone by LWAPP mode

  Download a version of Cisco IOS using a TFTP server:

  Step 1 in the IP address of the computer on which your TFTP server

  software should be from 10.0.0.2 to 10.0.0.30.

  Step 2 make sure that the PC contains the image point (for example file

  as c1200-k9w7 - tar.122 - 15.JA.tar for series 1200 point access) in the

  The TFTP server folder and the TFTP server is activated. Monitor of the

  TFTP program to see the code for transfer to the AP.

  Step 3 Rename the access point image file in the TFTP server folder

  C1200-k9w7 - tar.default for series 1200 point access,

  C1130-k9w7 - tar.default for a series of 1130 access point, and

  C1240-k9w7 - tar.default for 1240 series access point.

  Step 4 connect the PC AP with a category 5 (CAT5)

  Ethernet cable. This must be a crossover cable if connected

  to the AP. Or ethernet cable is normal if the AP and laptop are connected

  to a switch.

  Step 5 disconnect the power to the access point.

  Step 6 push the MODE button and hold the button while you reconnect power to the access

  point.

  Step 7 press and hold the MODE button until the status light turns red

  (about 20-30 seconds), then release.

  Step 8 wait that access point restarts, as attested by all lights

  Green followed the status light blinks green.

  Step 9 after the access point reboots, reconfigure using the graphical interface or

  the CLI.

  If the image is not download from Server/tftp on your computer, you may need to delete the previous image of tar on the access point of the console:

  Simply hold the mode button until the light is red.

  Then, by using the console port, make sure that the guest is AP: and do a show «»

  "Flash:" on the device and make sure that there is no image that begins

  "c1130-rcvk9w8-tar..." ». If there is an image that starts with who then

  Delete it with "delete flash:

• How can I remove the persistent database on stand-alone simulators?

  I use stand-alone device simulators (not of JDE or Eclipse according to) to test an application on multiple platforms. In order to do some tests first-time behavior, I need to blowing the persistent data store before each new installation. In the JDE-based simulators, there is a clean.bat which does just that. However, for these simulators autonomous, that I can't find anything like that under the folder, they were installed in. I tried to reset, and I tried to uninstall and reinstall the Simulator itself, and yet the data is * really * persistent - won't go away. Of course it's stored somewhere else.

  Does anyone know how to remove all data on these stand-alone simulators?

  I use Windows Vista, 4.2.1\4.2.1.96...7130-Cingular ...\Research in Motion\BlackBerry device simulators Simulator.

  Thank you

  Jay

  Vista virtualizes the app directory in "Program Files" when an application tries to write.

  You can find the files in your Users in AppData directory.

  Click on the C: drive in Explorer, and then look for *.dmp.

  It's probably something like c:\Users\jaybb\AppData\Local\VirtualStore\Program Files\...etc...

• Can possible save of Cisco DCNM on NFS and FTP on the stand-alone dcnm Server

  Can anyone suggest me that how I can back up the database DCNM 7.2 for a stand-alone server on NFS /FTP?

  What is the procedure to perform the backup on server NFS /FTP?

  Is any dependency to take backup on remote servers from stand-alone server DCNM (not HA)?

  Hello

  VIEW includes a database backup utility in the $INSTALLDIR/dcm/directory/bin/view.  There are 2 versions of the script, one for Oracle and one for postgres databases, and they both can be run from the server command line.  These scripts will create a dump (.dmp) database file which you can ftp offshore to another server to files, if you wish.

  For reference, here is the documentation on backups of db VIEW:

  http://www.Cisco.com/c/en/us/TD/docs/switches/Datacenter/SW/7_2_x/Fundam...

  Thank you

  Eric