RedHat 5 video failure using stand-alone converter

Similar Questions

• Question: With the new stand-alone converter how do you do a cold P2V? (booting from CD)

  With the new stand-alone converter how do you do a cold P2V? (booting from CD)

  Well, I see that cold Conversions are more supported.

• Blue screen after with VM stand-alone converter P2V conversion

  Hello

  I started to implement VMware in my company.

  I installed standard Vspahere 5 withouth any problem and made all configurations.

  For the moment I want to convert the physical server, the virtual machine and for this I have download VMware-converter stand alone.

  I fist he installed on a Windows 2008 server that I want to convert.

  The conversion was adopted without any error message but in the end the virtual machine cannot start normally.

  I have a blue screen with thos messages:

  "Launch Startup Repair tool" or "start windows normally".

  I converted to the other servers, but I don't know how to proceed with this error message.

  Please could someone help?

  Thank you

  Above all this happen, after the virtual machine is converted the selected SCSI adapter would be logical bus, because of which the VM throw a blue error screen.

  change the logic of the bus at LSI logic (windows 2 k 3, 2 k 8, vista)

  How to change see below KB:

  http://KB.VMware.com/kb/1002149

  Please allow points for correct/good answers by clicking on the tabs

• Installation and use of the stand-alone converter 5.5

  vSphere 5.1, 5.1 VMware, Windows Server R2 64 bit VM 2012

  I am new to VM and VMware.  I didn't realize until today that if you allocate a certain amount of disk space for a virtual computer and later decide to reduce the allocation of disk space, you must convert "" the virtual machine to an amount reduced space during the conversion.  I allocated 300 GB to a virtual machine and I want to now the award to 100 GB.  The real Windows Server 2012 R2 64 bit partition size is currently 40 GB.

  What I want to do is to install the Converter 5.5 on the same physical server (Windows Storage Server 2012 64 bit) where I currently have installed 5.1 vSphere.  I would use 5.5 of converter to convert the virtual machine that has excessive disk space allocation of the physical server.

  1. What are the options use during installation of 5.5 Converter (Converter Standalone Server?, Converter Standalone Agent?, Converter Standalone Client?, etc..)

  2. are there any special advice and guidance for conversion into a VM with less disk space allocation?

  Thanks in advance.

  
  

  First I create a VM "empty"?  I see are my existing VM, without the possibility to appoint a new virtual machine.

  No, you don't need create a VM 'empty', just type the name for the new virtual machine and try to use a different name of the VMs on the right panel.

• Using the stand-alone converter 5 with entry as local windows 7 in vmware fusion 4 output, the output is a folder with many files. How can I get this folder into a single file with the extension windows7.vmwarevm?

  I use standalone converter where I am converting my local windows 7 in vmware fusion 4 at the exit. When I made the migration wizard previously, I had an output of a windows7.vmwarevm file. However, when I made the converter, I had a folder called windows7. In this case, I had several files.

  Is there a way for me to convert all these files into one file, that is to say: windows7.vmwarevm? do I need to use the converter or other vmware tools?

  Welcome to the community,

  Please take a look at Re: how to convert a package/package of my folder on drive hard/vmware fusion? to see if that helps. This is a pretty old post, but I think that it is still valid.

  André

• Problem adding a second drive to VM after P2V using Stand Alone inverter

  Hello

  Let me preface this with anguish and you say how much of a hassle it has been from the beginning.

  We owe to P2V a server having a 25gig main drive and a 8gig of secondary disk for data. We had to move the files a long distance with the help of FTP, so offers them to us in some regions, by ensuring that all files have reached their proper destination.

  We have the files downloaded in the SAN and much to my surprise, the second disc of data showed as a *-flat.vmdk file without header hard file. I opened the browser and the virtual machine added to the inventory, but couldn't turn on with the second disc attached. I removed the second disk of the virtual machine and it has started well. But now I have a car I can access.

  I would like to convert the *-file flat.vmdk to work hard file but I'm not sure how with my limited resources. I don't have the vSphere client to work with. I downloaded the RCLI for vSphere but I have to be honest, I'm not very good with scripts.

  I tried following this tutorial: http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1002511

  But the notes are asking me to use the console, which I do not have access with 4 ESXi and vSphere Client.

  Attached is the original .vmx file that was created during the P2V

  You will also find a screeshot of the files I work with that

  Any help would be greatly appreciated!

  Welcome to the communities.

  You can run through to revive the P2V conversion and just select the second drive. It's probably the easiest get right.

  You can access the console on ESXi using the Mode of Tech Support

  For 4.1 http://kb.vmware.com/kb/1017910/

  For 4 http://kb.vmware.com/kb/1003677/

  You can take a look at http://sanbarrow.com/vmdk/disktypes.html

  Forum - VMware communities forums upgrade notice will be upgraded the weekend of December 12. The forum will be in playback mode only the Friday 10 December 18: 00 PST until Sunday December 12 2 AM PST.

• video introduction to stand alone

  I'm working on a standalone video presentation, will play directly from the PC. So no worries on the size of file or streaming.

  Right now I use WMV9 with bitrate without constraint, decoder to auto, avg bitrate maxed out to 10,000

  I always get compression artifacts during playback, even when using own hi res tif (not jpg) files

  Tips on getting the best quality of PP5.5?

  Thank you

  Dr

  Try to create an AVI file without loss using Lagarith or UT codecs.  Both are free and work very well with the PP.  Both are lossless, so it will not degrade the image at all.

  The files will be larger, but you said that it was not a matter of concern.

• Xserve RAID - easy to use stand-alone unit

  Is it possible to use a unit of Xserve RAID just by himself plugged into a mac (e.g. Mac Pro) via ethernet or require a Xserve in fact as an interface between the table and the Mac?

  Thank you.

  It will not work as long as a unit of storage/registration to access the data via a ethernet cable. You use the cable for using RAID admin administration. An XServe RAID to work its intended such as data storage and first-time buyers, will require a compatible Fibre Channel host bus adapter (HBA) or Fibre Channel switch. You don't need a server hardware dedicated as an XServe or any other thing that would be considered a server such as a Windows Server. Any Mac or PC with an installed compatible Fibre Channel card will do.

  The XServe RAID unit is a class of units RAID, called also directly Attached Storage or DAS. It is not a network (NAS) RAID storage unit.

• Problem with stand-alone convert 5.0

  Hello, can you tell me how works with vcenter 5.0 tool to convert a machine a LUN infrastructure in hot.

  I installed in the virtual machine that hosts the vcenter converter 5.0 and when I want to convert a machine a hot here is the error message I get.

  A general system error occurred: Crypto Exception: library error: 02001005:system: fopen:Input / output error: cannot load C:\ProgramData\VMware\VMware vCenter Converter Standalone\ssl\rui.crt

  What do I do?

  Thank you.

  I found this KB:

  • http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1028293

  Good luck.

• How can I remove the persistent database on stand-alone simulators?

  I use stand-alone device simulators (not of JDE or Eclipse according to) to test an application on multiple platforms. In order to do some tests first-time behavior, I need to blowing the persistent data store before each new installation. In the JDE-based simulators, there is a clean.bat which does just that. However, for these simulators autonomous, that I can't find anything like that under the folder, they were installed in. I tried to reset, and I tried to uninstall and reinstall the Simulator itself, and yet the data is * really * persistent - won't go away. Of course it's stored somewhere else.

  Does anyone know how to remove all data on these stand-alone simulators?

  I use Windows Vista, 4.2.1\4.2.1.96...7130-Cingular ...\Research in Motion\BlackBerry device simulators Simulator.

  Thank you

  Jay

  Vista virtualizes the app directory in "Program Files" when an application tries to write.

  You can find the files in your Users in AppData directory.

  Click on the C: drive in Explorer, and then look for *.dmp.

  It's probably something like c:\Users\jaybb\AppData\Local\VirtualStore\Program Files\...etc...

• Can deploy us jdeveloper 11.1.2 in stand-alone weblogic 10.3.4?

  Hello
  I have an urgent question on the deployment. Can we use weblogic 10.3.4 to deploy adf jdeveloper 11.1.2 applications?
  and how did sherman patch if I have to use stand-alone weblogic 10.3.5?
  Please respond to this request?
  Thank you very much. Please answer.

  Thanks to Timo Hahn,

  http://www.Oracle.com/technetwork/developer-tools/jdev/shermanrelnotes-405777.html#deploy says:

  The duration of the ADF will move into a stand-alone application server by applying an Opatch bundle on top a PS4 11.1.1.5 version of the Application Developer shiphome

  PS4 = 10.3.5

  INCLUDING

  John

• A stand-alone 1252 can be converted to AP light?

  I received incorrectly an AP 1252 (AIR-AP1252AS-E-K9 model number) and hope to convert to a light AP. But in the documentation for this device is missing in the list of devices that can be converted.

  I am also unable to find a tool to upgrade for this model.

  Is it possible to convert this device?

  Someone on the forum used the last upgrade tool and siad, he was able to convert the LWAPP 1252. You can try it, otherwise here are the steps of another Member on the conversion of these ap:

  Here is a method to perform the conversion.

  * Method 1: (Mode key) *.

  1. install an external tool of TFTP for example tftpd32 from http://tftpd32.jounin.net/ tool

  2. assignment of IP address in the range of 10.0.0.2 -.254 (Ex: 10.0.0.3) to the TFTP (your laptop or pc).

  3. download the IOS lwapp image on the tftp root directory. Use http://www.cisco.com or

  http://tools.cisco.com/support/downloads/go/IPCheck.x?defAdv=N&sftAdv=N&image=c1250-rcvk9w8-tar.124-10b.JA3&filepath=/swc/esd/02/crypto/3DES/281235915/guest&filename=c1250-rcvk9w8-tar.124-10b.JA3&advUrl=null&isk=Y&defInd=N&mdfid=281235915&sftType=Autonomous%20To%20Lightweight%20Mode%20Upgrade%20Image&optPlat=&relVer=12.4 (10B) JA3 & starts = 271159 & treeMdfId = 278875243 & tree_name = wireless

  4 rename c1250-rcvk9w8 - tar.124 - 10B .JA3 c1250-rcvk9w8 - tar.default

  5. make sure that you set the IP address on the IVB of the AP interface if it is not set. Set it in the 10.0.0.x range default is 10.0.0.1.

  6. connect the Ethernet port on the AP to your server TFTP (laptop)

  7 press and hold the mode button and power off of the AP.

  8 power back the AP while constantly maintaining the button mode for 20-30

  seconds.

  * Method 2: (Archive command) *.

  1. install an external tool of TFTP for example tftpd32 from http://tftpd32.jounin.net/ tool

  2. assignment of IP address in the range of 10.0.0.2 -.254 (Ex: 10.0.0.3) to the TFTP (your laptop or pc).

  3. download the IOS lwapp image on the tftp root directory. Use http://www.cisco.com or

  http://tools.cisco.com/support/downloads/go/IPCheck.x?defAdv=N&sftAdv=N&image=c1250-rcvk9w8-tar.124-10b.JA3&filepath=/swc/esd/02/crypto/3DES/281235915/guest&filename=c1250-rcvk9w8-tar.124-10b.JA3&advUrl=null&isk=Y&defInd=N&mdfid=281235915&sftType=Autonomous%20To%20Lightweight%20Mode%20Upgrade%20Image&optPlat=&relVer=12.4 (10B) JA3 & starts = 271159 & treeMdfId = 278875243 & tree_name = wireless

  4. make sure that you set the IP address on the IVB of the AP interface if it is not set. Set it in the 10.0.0.x range default is 10.0.0.1.

  5. connect the Ethernet port on the AP to your server TFTP (laptop)

  6. at the point of access, type archive download-sw / overwrite/force-reload tftp: / //c1250-rcvk9w8-tar.124-10b.JA3

  ****************************************************************************************************************************************

  The other direction (lwapp to stand alone)

  http://www.Cisco.com/en/us/docs/wireless/access_point/conversion/LWAPP/upgrade/guide/lwapnote.html#wp161272

  ****************************************************************************************************************************************

  If you must manually 'Prime' the LWAPP:

  Ap #lwapp AP ip address

  AP #lwapp ap ip default-gateway

  Ap #lwapp AP controller ip address

  Hostname ap AP #lwapp

  (optional)

• Using a stand-alone WebLogic Server instance - ADF Insider issue

  Hello
  
  I just watched the [use a stand-alone WebLogic Server instance - ADF Insider | http://www.youtube.com/watch?v=yGSR6dwd3nw] video and I gave a try installing the WLS in my dev machine.
  
  Unfortunately I can't see how to do a run/debug jspx page right click in the WLS newly installed and configured.
  
  Note that the wizard will create a server connection Application under the radio button in the built-in Server displays "a built-in server can be started and stopped by JDeveloper. That applications can be deployed automatically to the server with the command run or Debug ... "but running a jspx always begin it pre-configured"IntegretedWebLogicServer"and there is no option to choose where to run from nor I see any configuration in the project properties.
  
  Could you please give me the missing indication?
  
  Yiannis

  Hello.

  First of all, thanks for watching the video. To specify the server of an application will run on, simply open the application properties and go the the Run category. Then select the appropriate drop down list WLS forum link to the built-in application server .

  Best regards

  Frédéric.

• Using Creative Suite as a stand-alone Application

  I currently use Visual Basic as an operating shell to manage databases, Flash files and MS Office applications in a 'stand-alone application.  I am considering the purchase of Adobe Web Premium to perform the same functions and possibly convert it to a web site.  When references to literature marketing 'application' am I have reason to believe that I can use Web Premium autonomous under the name?  Also, can I access MSOffice files or just the PDF files?

  Thank you

  Mike

  The web premium suite is a collection of programs designed for creating content as well as create and manage a Web site. It is compatible with Microsoft Office, but has no Office for its operation. It can work with files created in the Office.

• Using an FPGA as a stand-alone system to run labview 2012

  Hello

  I have a request for my main project which is built using Labview 2012 and I want to transfer to a FPGA as it becomes a stand-alone system with no attached PC. I saw that labview for this but I do not know what card FPGA and the labview libraries are able to do this, and what is the mechanism to do this.

  Software details: LabVIEW Professional Development System version 2012
  Operating system: Windows 10

  T2dei wrote:

  What about Xillinx Zedboard? Y at - it approach to transfer of LabVIEW code directly without the conversion, in the zedboard?

  N ° Code LabVIEW FPGA only works on FPGA boards OR.  If you give us a better idea of what your project and what you want, we could probably give you a better recommendation.

  Furthermore, since this is for reasons of the student, give your representative OR a call and maybe they can cut you a deal on a Board sbRIO.