Mode conversion controller in stand-alone mode in cisco 1702
I have cisco AP 1702 and in controller mode. I don't have the controller so want to convert in stand-alone mode. I went through various items for this and found this interesting way to do.
Run this command to convert:
# swarm - Standalone mode
# reload
I found this on this link: http://community.arubanetworks.com/t5/Controller-less-WLANs/How-to-conve...
Similarly, going through the longer process, I downloaded this for the standalone mode: https://software.cisco.com/download/release.html?mdfid=286281141&flowid=...
and for stand-alone mode, I have this one: https://software.cisco.com/download/release.html?mdfid=286281141&flowid=...
Here are the files I'm looking for?
Help, please.
This original link can cause a headache for an Aruba AP which is different.
Try this method:
The software of the first link you posted (https://software.cisco.com/download/release.html?mdfid=286281141&flowid=71622&softwareid=284180979&release=15.3.3-JC1&relind=AVAILABLE&rellifecycle=ED&reltype=latest) will work for the standalone mode (stand-alone).
This second link is light which means the controller-based and you don't want that for this scenario.
See you soon,.
Ric
Tags: Cisco Wireless
Similar Questions
-
Stand-alone configuration of Cisco Aironet 700i
Hello
I'm well aware new products Cisco. So please forgive my basic questions.
I have Cisco Aironet 700 series AP(AIR-SAP702I-Q-K9). I don't have a controller. I need to set this up as standalone access point.
I tried all the basic steps and tried to activate the two radios, but no luck. Anyone can guide me please on how to configure the AP.
I use web access to configure the AP.
Help, please
Thank you
Sagar
Hi Sam,
Please check these messages to set up autonomous AP.
https://rscciew.WordPress.com/2014/05/24/single-SSID-configuration-on-au...
https://rscciew.WordPress.com/2014/05/24/multiple-SSID-configurations-on...
Concerning
Remember messages useful rates
-
Impossible to find a stand-alone image for Cisco Aironet 1140
Can someone give a link?
-JeIlMa
Here you go:
-
Conversion of Cisco Aironet 1130AG light in stand-alone mode
Hello
I just bought AIR-LAP1131AG. Unfortunately, I want stand-alone and not lightweight fashion.
Yes, is there a procedure to convert to "AIR-AP1131AG?
Thank you.
Hello Michael,
Yes, please follow this procedure for TFTP Re-imaging
/ * Style definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-priority: 99; mso-style-parent:" ";" mso-padding-alt: 0 to 5.4pt 0 to 5.4pt; mso-para-margin: 0; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman", "serif" ;} "}
1) Go to your Computer and from the tool menu -> folder options ->uncheck the hide extensions for known file types option.
2) Download the IOS image ( you can get this ios image from cisco.com) on your desktop.
3) Rename the image into c1130-k9w7-tar.default
4) Give your computer Ethernet an address in the range 10.0.0.2 till
10.0.0.30
5) Run the tftp server on your computer.
- Make sure that the directory of your tftp server is the desktop.
- Specify the AP address on the tftp server if needed.
6) Connect the AP to the computer with Ethernet cable.
7) Remove the power from the AP.
8) Press and hold Mode button on the AP, and insert the power jacket in the AP.
9) Keep pressing on the Mode button for (20-30 seconds) until you see RED Led.
10) Wait until the image installed and all led lights return to green
doesn't make sure that no firewall or antivrus is running on your computer.
I hope this helps.
Kind regards
Talal
=============
Please note the answers that will help you
-
Flexconnect AP stuck in stand-alone Mode
Hi all
I have all my APs configured under flexconnect at the remote site.
I have one controller at the head office.
There are two redundant links of MPLS from the main office to the remote site.
Now the question is, whenever my MPLS does a failover to the redundant link, all my flexconnect that aps disappear from the controller.
I understand that this is due to the clock pulse is expired and the AP in stand-alone mode .
But the APs flexconnect take a terribly long time to spend in connected mode, once flipping over MPLS (which is usually half a minute max).
Infact he takes so long that I have to manually close/reset switch-ports (POE) on which all the access points on the remote site are connected!
There are some adjustments that I'm missing here? or do I have I'll upgrade my firmware? By the way, my controller is currently on S/W ver: 7.4.121.0.
If you have a test controller, you can test it with a different code of the WLC software. Otherwise reach TAC Cisco and see known issues with this code on it.
HTH
Rasika
-
Limitation period for H-HARVEST stand-alone mode
Hello
We have a customer who is to evaluate a Motorla vs Cisco wireless solution. He said that a Motorola AP can operate in stand-alone mode for 48 hours. He lost after communication to the controller. Is there a limitation like this with a 2500 controller and the solution of access points 1140 series?.
Y at - it any reference to show?
Concerning
Luis Noriega
Not that I know... but here is a link to the limitation of the h-reap/FlexConnect:
Thank you
Scott
Help others by using the rating system and marking answers questions as 'response '.
-
Try to get the listener to the APEX to run in stand-alone mode
US aircraft problems try to get the APEX listener running in stand-alone mode on AIX, but that did not work. We decided to switch to Linux, and now we get questions below on the Linux (Red Hat). Any ideas?
Thank you!
Java $ [oracle@ban-apex-prod apex_listener]-Dapex.port=8070-Dapex.images=/home/orale/apex/images-jar apex.war
NEWS: Check out: /home/oracle/apex_listener/apex.war
See: ' java-jar apex.war - help' for a full range of configuration options
INFO: Extraction to: / tmp/apex
INFO: Using classpath: file:/tmp/apex/apex/___embedded/start.jar:file:/tmp/apex/apex/WEB-INF/lib/xdb-1 1.2.0.jar:file:/tmp/apex/apex/WEB-INF/lib/poi-3.6-20091214.jar:file:/tmp/apex/apex/WEB-INF/lib/apex.jar: file:/tmp/apex/apex/WEB-INF/lib/ojdbc6.jar:file:/tmp/apex/apex/WEB-INF/lib/je-4.0.103.jar:file:/tmp/ap ex/apex/WEB-INF/lib/xmlparserv2-11.2.0.jar:file:/tmp/apex/apex/WEB-INF/lib/ojmisc.jar : file:/tmp/apex/ap ex/WEB-INF/lib/ucp.jar:file:/tmp/apex/apex/WEB-INF/lib/commons-fileupload-1.2.1.jar:
INFO: From Embedded Web container: / tmp/apex
December 7, 2011 16:36:55 ___bootstrap. The Deployment Manager deploy
INFO: Deploy application path=/tmp/apex/apex/WEB-INF/web.xml
December 7, 2011 16:36:56 ___bootstrap. The Deployment Manager deploy
NEWS: deployment application path=/tmp/apex/apex/WEB-INF/web.xml
December 7, 2011 16:36:56 com.sun.grizzly.Controller logVersion
INFO: From Grizzly Framework 1.9.18 - o - Wed Dec 07 16:36:56 EAST 2011
INFO: http://localhost:8070 / apex began.
December 7, 2011 16:37:02 com.sun.grizzly.http.servlet.ServletAdapter doService
SEVERE: service exception:
java.lang.IllegalStateException: not yet initialized
at oracle.dbtools.apex.config.ApexConfig.notInitialized(ApexConfig.java:249)
at oracle.dbtools.apex.config.ApexConfig.getFile(ApexConfig.java:234)
at oracle.dbtools.apex.config.ApexConfig.exists(ApexConfig.java:63)
at oracle.dbtools.apex.admin.AdminManager.populateAdminFieldValues(AdminManager.java:868)
at oracle.dbtools.apex.admin.AdminManager.getFieldMaps(AdminManager.java:841)
at oracle.dbtools.apex.admin.Admin.displayAdminHTML(Admin.java:164)
at oracle.dbtools.apex.admin.Admin.displayAdminPage(Admin.java:147)
at oracle.dbtools.apex.admin.Admin.doGet(Admin.java:50)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sun.grizzly.http.servlet.FilterChainImpl.doFilter(FilterChainImpl.java:195)
at com.sun.grizzly.http.servlet.FilterChainImpl.invokeFilterChain(FilterChainImpl.java:139)
at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.java:376)
to ___bootstrap. SecureServletAdapter.doService (SecureServletAdapter.java:72)
at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.java:324)
at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:166)
at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapterChain.java:180)
at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:166)
at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:791)
at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:693)
at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:954)
at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:170)
at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:135)
at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:102)
at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:88)
at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:76)
at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:53)
at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:57)
at com.sun.grizzly.ContextTask.run(ContextTask.java:69)
to com.sun.grizzly.util.AbstractThreadPool$ Worker.doWork (AbstractThreadPool.java:330)
to com.sun.grizzly.util.AbstractThreadPool$ Worker.run (AbstractThreadPool.java:309)
at java.lang.Thread.run(Thread.java:679)
December 7, 2011 16:58:39 com.sun.grizzly.http.servlet.ServletAdapter doService
SEVERE: service exception:
oracle.dbtools.rt.service.ServiceLocatorException: there is no defined service
at oracle.dbtools.rt.service.ServiceLocator.acquireAll(ServiceLocator.java:91)
at oracle.dbtools.rt.service.ServiceLocator.acquire(ServiceLocator.java:74)
at oracle.dbtools.rt.service.ServiceLocator.acquire(ServiceLocator.java:85)
at oracle.dbtools.rt.web.HttpEndpointBase.dispatchers(HttpEndpointBase.java:138)
at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:85)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sun.grizzly.http.servlet.FilterChainImpl.doFilter(FilterChainImpl.java:195)
at com.sun.grizzly.http.servlet.FilterChainImpl.invokeFilterChain(FilterChainImpl.java:139)
at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.java:376)
to ___bootstrap. SecureServletAdapter.doService (SecureServletAdapter.java:72)
at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.java:324)
at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:166)
at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapterChain.java:180)
at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:166)
at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:791)
at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:693)
at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:954)
at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:170)
at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:135)
at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:102)
at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:88)
at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:76)
at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:53)
at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:57)
at com.sun.grizzly.ContextTask.run(ContextTask.java:69)
to com.sun.grizzly.util.AbstractThreadPool$ Worker.doWork (AbstractThreadPool.java:330)
to com.sun.grizzly.util.AbstractThreadPool$ Worker.run (AbstractThreadPool.java:309)
at java.lang.Thread.run(Thread.java:679)Hello
US aircraft problems try to get the APEX listener running in stand-alone mode on AIX, but that did not work.
Now, it's a coincidence - Colm just posted on this topic today: {: identifier of the thread = 2318817}
It is in any case, he started on Linux, so...SEVERE: service exception:
java.lang.IllegalStateException: not yet initializedThis is the relevant part of your stack trace. You must call http://
: 8070/apex/listenerConfigure and complete the initial configuration (mainly the database connection settings) before you can access the APEX for the first time. -Udo
-
Initially, opening an application stand alone not in run mode.
When you open an application stand alone for the first time, how can I automatically start in run mode? I want the user to click on the white arrow to start the program. Are there ways to get around this? Thank you!!
Yes. Here's how:
When you build your executable file, there are several screens in which you set parameters.
Under "The Source file settings", check "VI Set of properties for all contained items.
Click on the button "customize the properties of VI. Another dialog box appears that lists the properties of the VI.
Under 'Performance', uncheck the box "use the VI property.
Make sure that ' Run when opened ' is not checked.
Now, when you build your executable file, your user will have to press the white arrow to start the VI.
Hope this helps,
d
-
BlackBerry Smartphones stand-alone mode
Is there a stand-alone for the BlackBerry 8330 mode so I can listen to music or play video games while plane? It allows the unit to be on, but calls or e-mails aren't coming through.
Welcome to the forums.
Yes, you can simply turn off the wireless. Click on icon to manage the connections, then click on disable all connections.
When you land, go back and click on enable all connections on.
-
VAPP start not allowed in stand-alone mode
Hello
I encountered a problem while trying to create a paralytic by vCloud web gui. He created in fact very well, but at the start it says "Mode is not supported on a stand-alone host." What it means? How can I solve this problem?
Thanks in advance
fejese
You have 2 + ESX(I) hosts and DRS is enabled on all hosts?
-
Stand-alone mode - scalability
Hello
We have an environment where we organize the listener of the APEX in stand-alone mode (on linux). Currently, it works on dev environments and test.
The question is how to dimensionnera the independent auditor once we expose this to hundreds of users in the production environment?
I know that the cost of not using a J2EE server is the management and control, but how to dimensionnera the independent auditor from deployment to a Web server?
Brgds
Martin B. NielsenThe stand-alone mode is only for development purposes. It is not intended for production use. You will need to use a proper application for the production server.
-
Please help us to solve the problem in the subject MXE3500 RN with stand-alone mode
Dear all
My command team MXE3500 with node resource. 5, in fact, we would use as standalone, but I can't access http://x.x.x.x/mxeui.
Is the node of resource able to run on the standalone device? or use the resource instread Manager
Best regards
Boonpot
Node resource must be associated with a resource manager. Only resource managers can be stand-alone.
-
Stand-alone 3502I without controller?
I have a client with several former Aironet 1121 G from WAP. In one place of the factory several big engine noise levels prevents a reliable connection to the WAP, even if it is located in the same room as users. I mean updated the 1121G to the 3502I to take advantage of Clean Air technology. This raises two questions:
1) will be able to effectively manage the RF noise only 3502I or it requires a WAP network to work properly?
(2) the 3502I requires the controller of CT2504 to clean at work, or it will run in stand-alone mode?
Thanks in advance,
Joe
Does that drop the connection speed down to about 1Mb/s?
NO. 802. 11A is high-speed, short-range radio. 802. 11b is long range and low speed and has 3 channels of Alcan.
Unfortunately, if you have a noisy RF environment, putting a WLC (DCA, with active PTC) can help. Without this, you need to constantly monitor each WAP and manually change the channels and Tx power.
You are in a situation a little "who comes in first place, the chicken or the egg". If you cannot afford to get a WLC with your solution, don't bother upgrading. It's a waste of money.
-
Blue screen after with VM stand-alone converter P2V conversion
Hello
I started to implement VMware in my company.
I installed standard Vspahere 5 withouth any problem and made all configurations.
For the moment I want to convert the physical server, the virtual machine and for this I have download VMware-converter stand alone.
I fist he installed on a Windows 2008 server that I want to convert.
The conversion was adopted without any error message but in the end the virtual machine cannot start normally.
I have a blue screen with thos messages:
"Launch Startup Repair tool" or "start windows normally".
I converted to the other servers, but I don't know how to proceed with this error message.
Please could someone help?
Thank you
Above all this happen, after the virtual machine is converted the selected SCSI adapter would be logical bus, because of which the VM throw a blue error screen.
change the logic of the bus at LSI logic (windows 2 k 3, 2 k 8, vista)
How to change see below KB:
http://KB.VMware.com/kb/1002149
Please allow points for correct/good answers by clicking on the tabs
-
A stand-alone 1252 can be converted to AP light?
I received incorrectly an AP 1252 (AIR-AP1252AS-E-K9 model number) and hope to convert to a light AP. But in the documentation for this device is missing in the list of devices that can be converted.
I am also unable to find a tool to upgrade for this model.
Is it possible to convert this device?
Someone on the forum used the last upgrade tool and siad, he was able to convert the LWAPP 1252. You can try it, otherwise here are the steps of another Member on the conversion of these ap:
Here is a method to perform the conversion.
* Method 1: (Mode key) *.
1. install an external tool of TFTP for example tftpd32 from http://tftpd32.jounin.net/ tool
2. assignment of IP address in the range of 10.0.0.2 -.254 (Ex: 10.0.0.3) to the TFTP (your laptop or pc).
3. download the IOS lwapp image on the tftp root directory. Use http://www.cisco.com or
http://tools.cisco.com/support/downloads/go/IPCheck.x?defAdv=N&sftAdv=N&image=c1250-rcvk9w8-tar.124-10b.JA3&filepath=/swc/esd/02/crypto/3DES/281235915/guest&filename=c1250-rcvk9w8-tar.124-10b.JA3&advUrl=null&isk=Y&defInd=N&mdfid=281235915&sftType=Autonomous%20To%20Lightweight%20Mode%20Upgrade%20Image&optPlat=&relVer=12.4 (10B) JA3 & starts = 271159 & treeMdfId = 278875243 & tree_name = wireless
4 rename c1250-rcvk9w8 - tar.124 - 10B .JA3 c1250-rcvk9w8 - tar.default
5. make sure that you set the IP address on the IVB of the AP interface if it is not set. Set it in the 10.0.0.x range default is 10.0.0.1.
6. connect the Ethernet port on the AP to your server TFTP (laptop)
7 press and hold the mode button and power off of the AP.
8 power back the AP while constantly maintaining the button mode for 20-30
seconds.
* Method 2: (Archive command) *.
1. install an external tool of TFTP for example tftpd32 from http://tftpd32.jounin.net/ tool
2. assignment of IP address in the range of 10.0.0.2 -.254 (Ex: 10.0.0.3) to the TFTP (your laptop or pc).
3. download the IOS lwapp image on the tftp root directory. Use http://www.cisco.com or
http://tools.cisco.com/support/downloads/go/IPCheck.x?defAdv=N&sftAdv=N&image=c1250-rcvk9w8-tar.124-10b.JA3&filepath=/swc/esd/02/crypto/3DES/281235915/guest&filename=c1250-rcvk9w8-tar.124-10b.JA3&advUrl=null&isk=Y&defInd=N&mdfid=281235915&sftType=Autonomous%20To%20Lightweight%20Mode%20Upgrade%20Image&optPlat=&relVer=12.4 (10B) JA3 & starts = 271159 & treeMdfId = 278875243 & tree_name = wireless
4. make sure that you set the IP address on the IVB of the AP interface if it is not set. Set it in the 10.0.0.x range default is 10.0.0.1.
5. connect the Ethernet port on the AP to your server TFTP (laptop)
6. at the point of access, type archive download-sw / overwrite/force-reload tftp: / //c1250-rcvk9w8-tar.124-10b.JA3
****************************************************************************************************************************************
The other direction (lwapp to stand alone)
****************************************************************************************************************************************
If you must manually 'Prime' the LWAPP:
Ap #lwapp AP ip address
AP #lwapp ap ip default-gateway
Ap #lwapp AP controller ip address
Hostname ap AP #lwapp
(optional)
Maybe you are looking for
-
iCloud only appear photo stream is not on iPhone or iPad
I have all the photo options enabled in the iCloud settings and in the photo app settings. I turned them off and on again as well. However, no photo don't stream photos or photo album or camera application. what Miss me?
-
My keyboard suddenly started typing a character again and again and I couldn't stop. Arrived at post notes or anywhere where I tried to type. At the same time my wireless mouse began to be nervous and some characters appeared on my typing ("n" with 2
-
Server does not recognize my user name on outgoing emails
On my iPhone 4 my server does not recognize my email (Telstra) address on outgoing emails, but recognizes the incoming emails. What happened all of a sudden no reason apparent. I have two other email addresses on the phone and they work fine. One is
-
Branch 2 ports introduced "node of Feedback.
Hello When connecting 2 ports LabVIEW requires Feedback node. What could be a reason for this? Thank you. PS Code is huge, so I put just a fragment
-
Keyboard does not, Windows think key CTRL is pressed
My keyboard on my MSI Wind 100 worked great. Then it was potted. Upon restarting, I got a message saying the word seeing me that the CTRL key was depressed (it isn't) and did I want to start in safe mode. I tried both Yes and no. The keyboard is