a trigger to take multi images

Similar Questions

• Scrolling text to trigger the change of image.

  Not very well how else to describe it, but it was used really well in the new letter to Jane app (although not created DPS I think) and also things in such as functionality of fork on daft punk (http://pitchfork.com/features/cover-story/reader/daft-punk/) when you scroll the text and images in a slide show would change. I guess it can be done on board, but would you create a fake multi-state along on a timeline, and then insert it in the DPS doc and get somehow the scrolling text to move through the timeline of the animation on board. Or am I way off?

  Thank you very much in advance.

  Has no way to trigger a state change based on the position of a moving image in DPS. You will have to do it all in HTML/EDGE, where there has been any overlay for an Internet that had the scrollng text and images.

  Neil

• AI trigger and measure multi channels

  Hi all

  I have a simple problem (using USB-6259).

  can repeat the measurement trigger of AI and measure multi channels, but not both at the same time.

  -DAQmxCreateAIVoltageChan(hd, "DEV1/ai0",...)                    define the ai0 as the trigger channel

  -DAQmxCfgSampClkTiming

  -DAQmxCfgAnlgEdgeRefTrig

  -DAQmxStartTask

  -DAQmxReadAnalogF64 (hd, "DEV / ai0:3 ', / / I want to measure more channels"ai0:3"not just"ai0")

  Thank you

  Hassan

  Hi Hassan,.

  If you use an analog trigger with several analog channels, you will need to use the APFI0 input as source of relaxation. See this KB: Why do I get error-200264 when running analog reference trigger? All you need to do is to connect your analog signal online 0 to APFI0 (Paperback 20 in your case) and set the source of relaxation at APFI0.

  The reason is that you don't have that an NOC on Board (series E or M) and she's going to have to switch between the different lines (see this KB: modes of sampling). This parameter collides with the idea of a trigger analog reference on a specific line (constant sampling of data in a ring buffer up to what a condition is met). The APFI0 line, however, has its own CDA. Therefore, it can run simultaneously.

  However, please note that the ADC is fast but has lower resolution to HAVE it sampling ADC. See these KBs: series E and M series Analog Input Trigger resolution, be aware of a possible error between the analog trigger threshold and the value of the first sample

  Hope this clarified the issue.

  Best regards

  Peter

• Can I take some images from a video for a period of time?

  So, I was filming a time to build myself a bed flat pack.  Initially I started with a delay of 5 seconds on my go pro, but at halfway, I went for lunch and stopped the time.  On his return, I stupidly clicked on play and didn't go pro gave to the video recording mode.  So I have half my time elapsed as a photo, taken at intervals of 5 seconds, and the other half in 1080 p at 60 frames per second.  Is it possible that I can take a cap of a single image of the video screen every 5 seconds (or every 300 images or more) to make it so the same format as the first part.  I don't want to do this manually because this way, I would have about 50 minutes of video to sift through.

  See you soon.

  A viable method is to:

  1 apply a posterize time effect to the clip and set the framerate 1FPS

  2. use speed/duration (right click on the clip) and set a pace faster or the shorter duration - a few mathematical functions required: new duration = duration of the clip in seconds / 5 (since you wanted to 5 seconds interval) / frame rate of the project.  for example 50 min = 3000 s;  3000/5 = 600 (or images) / 30 fps = 20 seconds.  Think math is right.

  See you soon

• How to take an image and treat it to make two different images?

  I want to take a single image process to do (for example, HDR) then restart with the original image and make another completely different process (for example, B & W). Sometimes I have a lot of ideas for a photo and I like to see what I'm left with. What would be the workflow for this?

  You can make as many virtual copies of an image you want and treat them completely differently. It works very well for HDR, however. Photoshop is too 'intelligent' to allow you to get away with that.

• Bean - erase Images on a Multi image recording block

  Hello
  I use beans HandleImage (Yves Junior) on a block record multi, which is also the retail block. Everything works fine except when master record is changed, and the detail block is disabled the bean is not erased automatcially and images are left behind (indicating when the new record master has less lines to detail the previous record and you get child previous images left behind)
  
  I was wondering what the trick was to erase the images? I know that the command I need to use is:
  
  Set_Custom_Property (p_bean, p_row, 'CLEAR', ");
  
  But what is the best way to erase all the lines?
  
  Steve

  Have you tried:

  Set_Custom_Property( p_bean, ALL_ROWS, 'CLEAR', '' );
  

  François

  Published by: Francois Degrelle on October 15, 2010 17:15

• T610: thin client, multi-imaging platform

  Hi all

  IV ' e hoping to put this in the right place and someone can help or point me in the right direction.

  I'm looking for information on Thin Clients and Device Manager (HPDM), specifically on best practices on building and image capture, cross-platform and imaging would be advantageous.

  I am currently using HPDM Imaging for my thin clients t5470 and t5470e, t610, t620.

  I'm looking for a few docuemntation on recommended Configuration of HP for Imaging. is it to make a "gold" image or it can be pre-determined by HPDM like Microsofts SCCM or WDT?
  
  It would be fantastic if I could get it down to a single Image of WES7 for most of my Thin Clients if possible.

  Thanks in advance.
  J

  HPDM provides no functionality of creating an image, tt just do capture and deploy.

  The factory image include all drivers are built by HP R & D WES, there should be no one who can help you, but as far as I know there is no document to save the steps in detail. I suggest that you raise a ticket to impact to HP for help.

  MDT can not be used to deploy the image provided by HP. When building the image, no matter it is an original image or Thinupdate captured image, HP has done little customization in/after imaging process. I don't think that MDT can identify and carry out even these customizations.

• Take the Image of the URL and put in Bitmap image

  
  

  A few steps are:

  * use the connection HTTP (S) to upload your image as a series of bytes

  * Store the bytes in a byte array

  * Use EncodedImage to build your image

  The rest of the code, you should be able to provide yourself, and if you can't, there are a lot of discussions and example there of segments of code in question using Connector/HTTPConnection classes.

• How can I take my images in a specific folder on my HD in LR and the transfer of an external HD to make them appear in LR

  How to make my images in a specific folder on my HD in LR and the transfer of an external HD to make them appear in LR.

  My external hard drive is connected to my computer.

  In your operating system, copy (and not move) pictures of the external HD follow these instructions, do scroll down to the section called "update folder location". Adobe Lightroom - find folders and files moved or missing

  Once you have done this, and everything works as expected, you can remove photos from the internal HD.

• CS6? Make a GIF with multi images

  Hi all thanks for looking.

  I want to make a gif from several images. However, I was hoping to do with an import of my 30 images? Is this possible via import batch?  I found making a layer at a time in the tutorials that I found.

  If so please tell me the path to...

  IGE: Import files >? >? >

  Overview of ram how?

  I export a timeline AE as PNG and want to do as a GIf to play...

  Thank you

  NORTH CAROLINA

  Try file/Scripts/load files in the stack.  Each image will be a layer.

• Show Mult Images slideshow

  Is it possible to have a slide show that shows more then one image at a time?  I'm looking to put a slide show top scrolling my page that just guard roll images while showing 2 or 3 of them both.

  Use the blank publication widget at the end and place several images in the container target. Drag in the gun in Place while placing an image in order to give each of them a desired in the container size target for display.

  Thank you

  Vinayak

• Is it possible to take several images and 1 frame?

  I created a Flash animation, which is of 14 images, I need to be 1 long chassis, but I always have the animation. Is it possible to make 1 frame and keep the animation?

  (i) to select the layer as well as executives and give Ctrl + Alt + x to cut frames

  (II) create a new movieclip

  (III) select the layer with the frames in the new movieclip and give Ctrl + Alt + v keys to paste images

  She's the one

• I had the problem in loading multi-image

  var j: Number;
  var wid:Number = 100;
  var imgLoader_show_board:Loader = new Loader();
  for (j = 1; j < 10; j ++) {}
  imgLoader_show_board.load (new URLRequest ("marker_pic/rd_designed_marker_00" + j + ".jpg"));
  imgLoader_show_board.contentLoaderInfo.addEventListener (Event.COMPLETE, onImageLoaded_show_board);

  }
  function onImageLoaded_show_board(evt:Event):void {}
  trace (j);
  addChild (imgLoader_show_board);

  imgLoader_show_board.width = 75;
  imgLoader_show_board.height = 75;
  imgLoader_show_board.x = wid;
  WID += 100;
  }

  I want to load image 9 at the same time

  but there is finally the last image being loaded.

  should ' t use loop for do?

  A loader instance can contain only one piece of content at a time.  Your code is always put in the charger even content.  Try to declare your charger inside the loop and see if that helps.  Your onLoaded function will have to be changed (or moved in the other function as well).

  var j: uint;
  var wid:Number = 100;

  for (j = 1; j<10; j++)="">
  var imgLoader_show_board:Loader = new Loader();
  imgLoader_show_board.load (new URLRequest ("marker_pic/rd_designed_marker_00" + j + ".jpg"));
  imgLoader_show_board.contentLoaderInfo.addEventListener (Event.COMPLETE, onImageLoaded_show_board);
  addChild (imgLoader_show_board);

  imgLoader_show_board.x = wid;
  WID += 100;
  }

  function onImageLoaded_show_board(evt:Event):void {}
  trace (j); This is likely to display the same value... the loop is too fast
  evt. Target.Content.Width = 75;
  evt. Target.Content.Height = 75;
  }

  A for loop will probably end before the first image is loaded, and there is no guarantee that things will be load into any consistent order.  You're probably better off not to use a loop, but rather to create a functional loop, where your end of loading an image starts loading the next image.

• LR to PS takes red images

  Hello

  I've scoured the forums and I've seen other similar to mine, but I never find instructions on how to solve the problem.

  My problem: I process my images in LR first, then I want to export to PSCS4 for additional processing.  When I do, the image becomes oversatured and there is a compatible red cast (especially in skin tones) appears so bad particuarly on my monitor range: Lenovo L220x.  I wish that the color was compatible.  I saw messages that say to activate all PS color management policies and I did it and it doesn't work.  I tried to re - calibrate my screen and who does not.  Is there a step by step/flowchart process that me can start from the beginning and work through all the possible problems and solutions.  Any help would be great! Thank you.

  My specs:

  • MacBook Pro
  • 2nd monitor: lenovo x 220
  • i1display2 monitor standard
    

  AHA, it's a known bug in Photoshop CS4. You must disable OpenGL acceleration so he could use the correct profile on a secondary screen. See here for instructions: http://kb2.adobe.com/cps/404/kb404898.html

  You can also try to switch off the option "move the color matching.

• Is it possible to nest a trigger or a composition within each image in a slide show?

  Hello

  What I'm trying to do, is to have a slideshow with images that open to a large of themselves (in Viewer mode) version when you click on it. I am currently reach using a Lightbox Composition widget with the trigger placed over the image in the slide show, I would like to enlarge.

  What I want to do, is to integrate the relaxation or the whole composition in the show, on top of each individual hero image, so that when the slide show images, a new widget/large image Composition change appears.

  For example, if the first slide in the slide show is a photo of a flower, clicking on it would open this image of a flower in lightbox view. If the second image is a bicycle, clicking on it will open a lightbox consisting only of the bicycle entirely separate publication.

  Is it possible to do this inside the Muse, or get a similar effect? I thought to bind each hero image a separate page that already has the largest lightbox mode activated, but I would like to avoid that if possible.

  I suggest you buy a third party for this widget. Visit QooQee Adobe Muse Templates | Muse of the themes | Widgets of Muse and Muse-exempt products or Muse - Themes.com - Adobe Muse Templates | Widgets of Muse and Blog to see if they have created something that will work for you.