A vertical section only - DPS Table of contents?

Similar Questions

• Duplicate sections throughout the table of contents after generating the HTML5 multiscreen output

  Use: RoboHelp 10, version 10.0.0.287

  Steps to reproduce the problem:

  1. click on file > create > main layout (Multiscreen_HTML5)

  2 al ' Generate window click on [Save and Generate]

  3. wait

  4. click on [view results]

  5 results show swathes of the table of contents reproduced in other sections.  10 more times to repeat the generation before that the entire table of contents points are correct and I can publish.  This is not preventing me from doing the job, but it's certainly a time killer.

  Background: I inherited a working version.  I did not create it.  I have more knowledge of the HTML language, but I'm not a developer.  I didn't upgrade beyond RH10 option.  I have studied this many times, but have not been able to find a solution.  The only other thing I've seen sometimes are error messages related to the toctree.js file, but I still don't understand those.  Even when I have not, this past yet, but I have included this error just in case it may be related, although I suspect that it is a separate issue.  I don't currently have the line in the js file because this sample is old and I have not seen the question at least a month.

  Other Notes: I've seen a few posts on a similar question in the printed version, but, I do not have a printed version.  I don't know if that makes a difference, and do I know if anyone in the past that put in place or even where to go to watch.

  

  

  Try to move the project to somewhere that the path is not so long and generate a new folder.

  See www.grainge.org for RoboHelp and Authoring information

  

  @petergrainge

• Linked Table of contents for iPad app using DPS

  Hello

  I'm creating an iPad app for a publication using Adobe InDesign. I would like each section of the table of contents to link (by tapping) to the page in the publication. How can this be achieved?

  You'll want to create buttons with to go to the URL actions that use the "navto: / /" prefix:

  http://helpx.Adobe.com/Digital-Publishing-Suite/Help/hyperlink-overlays.html

  In addition, you'll want to do some reading and watch video for you familiar with DPS:

  ITE.html http://helpx.adobe.com/Digital-Publishing-Suite/Help/Getting-Started-Digital-Publishing-su

• display information in folders root on the table of contents

  RH8 HTML.

  I wonder that if there is a way to define a survey folder in a table of contents to display information, even just a list of subtopics in a main folder of a browser of WEbHelp and air base exit help.

  for example if you look at the help file in RH8, you click on a section of the table of contents at the top level, that is, tables of contents, indexes, glossaries. information appears and indicates what topics are described in this file in the help file.

  I want to do something similar with my help file, even if all the top-level folder, or a subfolder with subtopics just shows nothing until I click on a specific topic.

  hope that's clear, it's hard to explain... but surely a simple solution.

  Thank you.

  Nick

  Hi Nick

  I'm a bit confused as to exactly what you want to achieve here. I think that is a part of the question, you mix the terms files and TOC levels.

  When you automatically create a TOC RoboHelp certainly looks like the folder structure that exists in your project and creates a book for each file it encounters.

  Perhaps you mean ask how you configure books in your table of contents so that a click from the user, not only do they widen to reveal what are the links to topics within the book, but a topic displays on the right side that lists the explanations and links to what's in the book? If this is what you want, you will need to create a topic for each book. Make sure he read and appear as you wish, then use the 'Book with link' function of the table of contents to associate subjects with books.

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7 or 8 days - $24.95! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• How to create a Table of contents of a book as opposed to a single document?

  I'm working on a book with several chapters. Each chapter is a separate document joined as well as the rest of the book in InDesign. I have a table of contents in each document, and the hyperlink works very well when the document is exported to PDF. However, I was unable to create a single comprehensive contents table on the front of the book before Chapter 1. I tried everything I know how to create a table of contents for a single document, but that does not work for me with so many documents in the book. Is there something I missed? I'd appreciate any help in this regard.

  In the Options section of the Table of contents dialog box, there is a checkbox: Include book of Documents.

  What is checked, he must analyze each document in a book for styles to be used in the creation of the table of contents.

• I'd like to produce consistent spacing before and after the section headings in the table of contents

  Hello

  I am trying to create a style for the entries of table of contents for the titles of the books section. I would have a little more vertical space between these securities and two other section titles or sub-section titles, like so:

  Section 1

  Paragraph 1 a

  Paragraph 1(b)

  Section 2

  Section 3

  and so on. To do this, I can easily add a space before and after the space for the section title style. The problem comes when there are two titles with no intermediaries paragraphs, such as 2 and 3 in the example above. Then, the space between these titles is double. If I set is a nonzero value space before or after the space, but not both, then the titles won't be correctly spaced in areas where it has paragraphs either below or above a section title. Does anyone know how to get a uniform spacing?

  Thanks in advance for any advice!

  Make a third style for the case where there are two titles of section together.

• Table of contents using a style/section of the master page

  I'm at the top of my head I think... and probably incorrectly to the top of my document.  I hope I can quickly explain where I am:

  Question 1

  I'd like a Table of contents to use 10 section headers that appear throughout my document.  Here's how I set up:

  • In the master page, a place for the header of section and it gives a paragraph style.
  • Then, throughout the document, I used the "numbering and section options" start each new section and give this article is the unique name.

  When I went to generate the Table of contents, I've specified using this particular paragraph style that I used for the section headers, but nothing appears (except for the title, I asked for the General table of contents).  It's as if this isn't to find the sections - or this style (which applies only to the master page).

  Where am I wrong?

  Question 2

  I wish that my Table of contents, not numbered.  How do I do that?

  Shanell

  I don't know that you understood my post. I was able to do exactly what you did - create a master page with a frame and the section marker character (indicating "section" on the master page) and then add the actual text of the marker in the numbering and section options. The text appears on the page of live document.

  When I tried to do a table of contents, text was not resumed UNTIL I selected and carried this master frame on the page of the document (Ctrl + Shift + click on Windows or Cmd + Shift + click on Mac on the image that you want to replace). After substitution, the text appeared as scheduled in the table of contents.

  You're right about the number of page for this page. You can use another master without a page number, or you can cancel and delete the master page number frame. I assume that you will need to use a different master for the first page and pages in any section to avoid having the marker appear on all pages, or you can replace only the first page so that you don't repeat entries in the table of contents for each page of each section.  If you use the marker as a running header Section, you can learn more about Variables header running in the help files in place. In many ways, the use of a variable can be simpler and more direct.

• Table of contents & sections completed

  Hi all, just generally looking for some advice here.

  I develop some e-learning.  For now, assume that there are no quiz items in e-learning.  It's a bit linear e-learning, the user must read the information on each slide, click Next, go to the next slide, etc., and so on.  Assume that the e-learning module essentially contains four sections (call Introduction, Learn, Try and Conclusion).  FYI, e-learning will take place in the Cornerstone OnDemand LMS.

  I want users to have a Visual indicator that shows that they have achieved each of the sections.  I realize account I could use the Table of contents to show this to a certain extent and that is explored in method 2, but I would like your opinion on method 1:

  Method 1:  I would like to e-learning to launch on a Homepage blade I would create, which contains links to the four sections: Introduction, learn, try and Conclusion.  The user completes each section, he was invited to return to the slide of the House.  Whenever they form a section and return to the slide of the House, I would like to a green check mark to appear next to each completed section to indicate that they have made this article.  It is important that the user is able to log out of e-learning and back and that already completed sections still see the completed (indicated by the green check mark).  I guess I would need to use some sort of advanced actions.  Is it still possible in Captivate?

  Method 2:  I realize that I could use the Table of contents and that might just be simpler.  However, I prefer the method described in method 1, because I have much better control over the content.  However, if I use the table of contents, I would like to know the best way to show the State of implementation of the section.  I know that I have to group the slides in a folder in the table of contents, if for example I could group slides 2-10 in the case of Presentation , slides 11-20 in the record learning , slide 21-30 in the folder try and slides 31-40 in the folder of the Conclusion , however each once each article is completed by the user (normally indicated in the table of materials by a check mark green) It is not shown as complete in the table of contents.  The reason for this, is that I want the user to be able to view the article in the table of contents, but not the individual slides, and it appears a section appears only as finished in the table of contents if I show one or more slidesin of this article.  Is there a way to get around this limitation?

  I largely prefer to explore method 1 and method 2 is certainly viable if I can overcome the above restriction.

  I develop in Captivate 4 and Captivate 5 - I prefer Cp4, but happy to come back to Cp5 so is there any solution.  Thanks to everyone for all the advice!

  Hello

  Maybe my blog can help you? I offer a free model as well (it's for CP5), provided that you send me an email address (can be done via private message):

  Model for reuse the script

  Lilybiri

• I need to create a table of contents in iPages but I want only one word for the title, not the line of holes. Or, how can I change the contents of the table? Thank you!

  I need to create a table of contents in iPages but I want only one word for the title, not the line of holes. Or, how can I change the contents of the table? Thank you!

  Yes, you can have a one word title, by assigning a paragraph style title to this one word. No, you cannot change the text in a Table of contents, but you can change paragraph style font attributes (line) and add for example, a head of points between the types of OCD paragraph and page numbers. No part of the table of contents will not provide hyperlinks in exported PDF documents.

  When you look up in the menu bar, you can see the word iPages, or simply Pages. There is no product of iPages.

• Only reset the names of table of contents?

  Is there any method of resetting the table of contents without impact on the custom groups? I have a lot of groups I place directly in the table of contents, and now I need to insert a new slide that should appear in the table of contents. Hit the reset TOC button will add new slides and insert the name of the slide in the table of contents, but then I have to Setup custom all my groups of TOC. All I can do to avoid this? I suppose not, but thought I would check.

  I'm sorry, but the answer is no. I've learned since TOC appeared to create and modify only after completing the project. BTW the highest group level, you can group slides into the film, the name of the group will be included in the table of contents. If you want more than one level of grouping, the subgroups can be created in the table of contents, not in the film.

• Generated table of contents contains errors in the sections

  I'm working on a large document that was created by someone else. When I try to update the table of contents, there are a few spelling mistakes that are not in the headings in the body of the document (I corrected, but the table of contents are acting as errors are still there).

  For example:

  In my paper on page 32, there is a section "Fieldbus Protocol" (he was previously misspelled, such as ' Protochasl ' and I fixed it)

  It shows in the generated table of contents: 32 Fieldbus Protochasthe < < so this is to show the 'old' spelling, even though I've updated the table of contents with the page layout > Update Table of contents command.

  Is there a code behind (like HTML) for InDesign text which is perceived by the TOC generator? It acts like it is looking 'old' versions of these positions.

  Thank you!

  are you sure that this section of paragraph style is used to build the table of contents?

  There may be some invisible paragraph style which is then used to generate a theTOC

  You should check the exact name of the paragraph style that was used in your table of contents

  

• removal of table of contents and the interface on dps app

  Hello

  my project is to make an application using the digital publishing suite,

  When each page is a sequence of jpeg auto playing and loops ,

  keeps looping until striking to swipe to the next page and so on.

  I don't want to have to the table of contents or interface options.

  I want it to look in a digital book when the only option is to turn the page back.

  don't you think it's possible?

  thanx

  Yes, there is a solution that will allow you to avoid show nav bars. You create a slideshow full invisible screen on all pages that are selected by scanning and tap. In this way, when the user clicks anywhere on the page, it interacts with the slide show but seems to have no effect on the user. You must add on the top of the slide show navigation buttons so that users can access other items.

• Table of contents does not include the Section prefix

  The pages of this document in particular has a section prefix 'A', so the pages are numbered as well: a-1, A-2, A-3, etc.

  When I run a Table of contents, the table of contents is generated without the prefix, as the following section:

  Section 1... 1

  Section 2... 5

  Section 3... 9

  
  

  Is there a way, or something I'm missing from the table of contents is generated as follows:
  

  ... Section 1 a-1

  Section 2... A-5

  Section 3... A-9

  
  

  CS6, TIA
  

  
  

  Discovered the problem. When the numbering, I thought that I had actually created a section prefix. I have not, I just typed in the 'A' before the current Page marker.

• How to upgrade only the page numbers from a table of contents in Indesign CS6?

  Hello!

  Help, please! I make a medical book with more then 1300 pages and about 40 different table of contents.

  I want to update only the page numbers on all the table of contents. But I don't see the option to update the table of contents.

  I've seen on other forums that it is a very old and familiar problem. Do you have Adobe already fixed it?

  Nothing has changed with the function table of contents. If you update a table of contents using the standard method of the table of contents, the complete table of contents are updated.

  You can get the page numbers only updates manually by creating your table of contents by using cross-references.

• Table of contents in PDF link only gives access to a page!

  The TOC auto generates a table of contents in a pdf document. But the links are on one page only, they do not scroll down. Is it possible to create links that scroll?

  I guess by table of contents in a PDF document, you mean bookmarks on the Bookmarks panel. Auto TOC in InDesign cannot be changed. You can change (manually) destination of bookmark using the Bookmarks panel in Acrobat Pro.