display information in folders root on the table of contents

Similar Questions

• in the Table of contents, my photos are not displayed, can you tell me what I am doing wrong?

  I am writing an iBook on a Mac Book Pro of the retina, and when I go to see the table of contents it shows no picture... so I do something wrong, or not do something, everyone knows what this might be? Here you have a Table of contents on iBook author image. It is said that there are 5 chapters and Chapter 3 marking and it should show the main image of this chapter and down a row of thumbnails of all pages of this chapter. Nothing shows... I'd appreciate any info to solve this problem. Thank you.

  

  Quack quack.

  the thumbnails do not appear when you look at the table of contents to the author of the ib.  You must create the .ibooks file, do a preview for mac, and open it with the ibooks software and you will see knock thumbnails view or put your book on a iPad and if switch you to the comparable iPad display, thumbnails will be visible there.

  In addition, you must file an image file in the placeholder, which will be visible on each index type toc page, yes a picture shown throughout the book.

  good luck with your book and I hope you sell 1 million copies.

• How to display a complete tree of the table of contents in the body of a page instead of the sidebar?

  How to display a full (project) TOC tree in the body of the pages of the section instead of the default sidebar (left pane)? Is there a simple way to do this in the application? I have not yet discovered a way to do it, but I can't get to the right place. Any suggestions?

  I don't think you can view the table of contents on a page, and even if you could, the sidebar would always be there for indexing and search. The only possibility I can think of is to create a page where you create links arranged to act as a TOC, then maybe iFrame this page in. Each book might be a drop-down list to view links to topics.

  Maintenance would be horrible and she barely meets your requirement to be simple.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• Re: How to display records of newlyadded first in the table

  Hi all

  I use Jdev 11.1.2.3.0

  My requirement is I have a table in this table, I have a table and the form. Here, I want to display newly added records, first in the table.but that table always shows of old recordings first.so how do I display it.can someone help out me.

  Thank you

  G.Shilpa.

  You can control the line newly inserted into the table of the ADF

  http://lucbors.blogspot.in/2010/12/ADF-11g-how-to-control-where-new-row-is.html

  ttp://mjabr.WordPress.com/2011/07/02/how-to-control-the-location-of-the-new-row-in-aftable/

• Why the names of my chapters are not displayed in the table of contents?

  Hello. I use Indesign & DPS simple editing to make an application. In Indesign, I created several different documents that I used to make items that I put together in a Folio.  I saw it using the tool preview Adobe & on the iPad using Adobe Content Viewer. When I select the button table of contents I see thumbnail screenshots of the first page of each chapter, but no text chapter name.  For each of the documents that I used to make items that I named them after the chapter they represent, which is what I thought each chapter name defined.

  The strange thing is that before I did a couple of test folios and they do not have the name of chapter text. So what can I do to display the chapter name in the table of contents?

  Also, is there a way to change change the thumbnail used by the table of contents?

  Thank you

  The answer to both questions is in the Article Properties dialog box. Select the item in the Folio Builder Panel and choose Properties from the context menu. Specify the name of the chapter of "Title" - which is probably empty now. (There is a difference between an article name and a title of the article. The name is used for internal purposes, such as the binding, and the title appears in the application).

  At the bottom of this dialog box, you see a preview of the Table of contents. Click the folder icon and specify a PNG of 70 x 70 that you design.

• How can I display the table of contents for the iPod Touch to 6

  When I opened first of all iPod Touch Users' Guide, I used the table of contents (TOC) to locate and access sections in the manual. But, after looking through the manual for awhile, I tried to return to the table of contents, but it wasn't there! I have tried various things to see if the table of contents are being hidden, or if in some way, it has been deleted. Anyone can shed light on this mysterious event?

  What is the version of iBooks that you speak? There is an online version here: https://help.apple.com/ipod-touch/9/ Aha, I see the table of contents on the left disappears if you zoom before or make the narrow window and reappears if zoom you out or make it larger.

  TT2

• Content filtering to display in the table of contents with Actions (possibly using ActionScript?)

  I have 7 Captivate and would like to know if it is possible to filter some slides of OCD.

  The point here is that they may not be static, but change the slides to show transparently based on the choice of the user.

  == Example ==

  You have a file containing below 3 slides captivate. (A, B, C)

  And each slide content is needed for the subject in []. (I, II, III)

  A [I, II AND III]

  B [II, III]

  C [I, III]

  Lets say the user wants to know about the topic-II.

  While the user should only see slides A and B.

  If the user wants to know on the subject-I, then only slides A and C are shown in the table of contents.

  == == End of example

  In my view, that's not possible with only using Captivate and research to achieve anyway. (for example. Load the captivate through Flash and control the captivate Flash with AS3 file).

  Thanks in advance for your help.

  You have no control of this type on the default TOC THAT included with Captivate. You can have this control, if you create a custom table of contents and use advanced/variables actions. Advanced actions are converted on the duration of AS3 (for SWF) or JS (for HTML5). Since you talk about Flash, I assume you want SWF-output. I know a lot about system variables supplied, there may be some hidden variables that you can solve with AS3 or (better IMO) with JS, but only system variables for the table of contents is to lock or hide/show it (if in overlay).

• RoboHelp 2015 (12.0.2.384): The search returns topics do not are included in the table of contents

  ENVIRONMENT: Windows 7 Enterprise SP1, 8.00 GB of RAM, 64 - bit OS, Office 2010, Adobe Acrobat X Pro, Acrobat Reader DC 2015.017.20050

  DESCRIPTION OF THE PROJECT:

  • A single RoboHelp HTML project with three exits. One of the outputs is a 'validation' reference that has its own Table of contents.
  • Validation reference Table of contents contains a subset of the subjects in the main help system. For example, the help system main table of contents contains a folder named 'Administration '. This folder is not in the table of contents of reference for Validation.
  • The reference of Validation is displayed on a public web site. Therefore, we applied the tag "Non_public_info" contained in the topics shared that we do not want to appear on the public website.
  • WebHelp parameters are:
    • Validation reference TOC
    • No map file, no sequence to browse
    • Conditional compilation expression: NOT_Non_public_info_AND_NOT_StyleGuidelines_AND_NOT_TRP (we keep our Style rules in the project to facilitate access during development. TRP content must be rejected because it was not released.)
    • Exclude non referenced topics of output is selected.
    • Search options. Only 'Show Total number of search results' and 'View AND search Option in outputs' are selected.
  • After generating the WebHelp, we remove the files that we don't want (RoboHelp generates empty folders, even if the files are not in the table of contents.)

  PROBLEM: A search in the help of Validation reference reveals the topics that we think should not be included because the subjects themselves are not in the table of contents of Validation reference. For example, the section "Data quality analysis" is in the main table of contents help, but not in the table of contents of reference for Validation. Therefore, we do not expect the topic appears in the search results pane at all. But he does. When the user clicks on the subject, the "Resource not found" message appears.

  Nothing shows the topic Style_Guidelines because the StyleGuidelines label conditional construction applies to the entire folder and the "Style guidelines" book in the main table of contents. (Same thing for the TRP folder).

  QUESTION: Why are topics which are not in the table of contents and whose records are not in the project at all appearing in the WebHelp during a search? We need to rewrite the expression of conditional compilation or establish conditions differently. We assume not have topics in the table of contents, not including the topics not referenced in the output, and remove empty folders would be the way to go. Any help is welcome!

  Thank you very much.

  Carol Levie

  The table of contents does not control what ends up in the output for output online. All content tagged and tagged content which is not excluded by the expression of construction will be included. The parameter 'Exclude topics not referenced output' more exclude all subjects which are not in the table of contents AND are not related to any topic which is included in the output.

  On the other hand, for the print output the table of contents control which is found in the output. I think that it will fire a lot of people.

  If you generate the help and that you do not remove the unwanted files, do you still have the error? If this isn't the case, you know that the topic is referenced somewhere in the content of the reference of the Validation.

  Here is the help of RH11. I can't imagine it would have changed, but you could do a search to verify a second time for RH2015.

  Exclude output not referenced topics

  Select this option to exclude any topic that exists in the project, but is not the default theme in page layout or is not referenced table of selected contents, index or sequence to browse, or any referenced subject.

  Note: RoboHelp shows the topics not referenced that are excluded from the output in the output view module.

• Topics by opening the first occurrence in the table of contents

  Background: I created HTML5 Responsive help using HR 2015 for a web application. I organized the Hep role, then pages with these roles, users can access, and then by the tasks users can perform on this page. In many cases, a subject is listed under multiple roles and reuse and efficiency, I just dragged the same theme in the list of the topic in the table of contents as appropriate.

  I also used the text conditionalized on table of contents by role level. Using the example below, I have conditions for physician, nurse, and Patient, but I don't think that this is part of the issue well. Conditionalized roles were created for filtering purposes.

  Question: I have the overview topics that include hyperlinks to headings in red in the example below for each role. When a user clicks the hyperlink in this topic of presentation, he brings them to the FIRST occurrence of this topic in the table of contents, not the link that is associated with their role. When a user with the role of the Patient is in the topic view of their role and click the hyperlink 'Research for patients', help opens on this subject, but the "Searching for patients" in the topic role of physician in the table of contents on the left is highlighted.  Not a show-stopper, but it is confusing for users.

  Also, we had originally planned to use the filter feature to filter role help topics. When I filter to view only a specific role (nurse) and do the steps above, by clicking on the Preview 'Search for patients' hyperlink opens but there is no highlighting in the table of contents because this first occurrence is hidden in all the subjects physician.

  Note: This problem does not occur when I generate the content as WebHelp.

  What I want to do: When the nurse click on the hyperlink for 'Research for patients' of their overview topic, researching topic of patients is open and the search for patients is highlighted in the table of contents under the nurse, not the first occurrence (doctor).

  Questions: Is this a bug or is it repairable? And is it possible to fix it without creating the specific role of topics such as finding doctors for Patients, nursing research for Patients and so forth? I tried to delete the table of contents and start again, but the problem persists.

  Here is an example:

  Doctor

  Patient portal page

  Overview (contains links to sections below - view patient demograhic data, looking for patients, to renew orders)

  Display of the demographics of the patients

  Looking for patients

  Renewal of prescriptions

  Nurse

  Patient portal page

  Overview (contains links to sections below)

  Display of the demographics of the patients

  Looking for patients

  Display of orders

  Patient

  Patient portal page

  Overview (contains links to sections below)

  Update your demographic data

  Display of your prescrpitions

  My opinion would be that this is the expected behavior. My theory is that there is no information within the syntax of hyperlinks. A hypertext link is encoded such that when you click on it, you are taken to the landing page, as if sending the message "find the page named and post it by the specified parameters. What is happening is that the hyperlink goes to the first instance of the HTML page in your table of contents (.hhc file). There is no intelligence, he doesn't "know" that you are in the doctor or the nurse section - section he knows only that the page specified in the table of contents is listed in the file and thus, it only takes you there. The syntax of hyperlinks don't "know" where you are in the help system.

  I just also wanted to report the fault of strike in the Patient section, look a your orders of your example, assuming that you have copied and pasted into this thread.

• Error JavaScript prevents the table of contents, Index, search view

  I produced my RoboHelp HTML project webhelp and got an error javascript (this.maCom [...] (' is null or not an object) when you view the result. See the full error text below. So the table of contents, index and search are not displayed. We'll find the javascript error in the status bar of the browser that says "error on page". I found that if I saw the result of robohelp, the browser that launched shows the table of contents, index and search, but has a security warning about a restriction of running scripts or ActiveX controls. However, when I move the generated webhelp on my production server, the help doesn't have the security warning, but produces the error so that the table of contents, index and search do not show. I had done the same process to generate webhelp about 8 months ago but had no error whatsoever. In fact, this version is still in production and works very well.

  In my search for the problem, I found that it is the same error as message of the forum 4063663 (http://forums.adobe.com/message/4063663). I didn't have a second system with RoboHelp to be able to get other whphost.js, however, I have diff had the file generated with that found in template_stock and found only two different lines. These differences were only to replace a couple of variables with static text so I do not replace this file will solve any problem for me. That is the message of only forum I could find who addressed this issue.

  I was originally on RoboHelp 8.0.0 when I first encountered the problem, but has expanded and patched to version 8.0.2 and still had the same problem. I even created a new simple project. Once I moved the simple project on the production server, it also would display the table of contents, index and search.

  The strange thing is that only 8 months ago, I used the same process to generate webhelp without any errors (on 8.0.0). The only thing I can find is there is a Windows XP patch which affected the generation of webhelp. Furthermore, I also tried chrome and also produces the error.

  I don't know what is causing this problem or how to solve the problem. Anyone have any ideas?

  Versions:
  RoboHelp 8.0.2
  Windows XP
  IE 8.0.6001.18702CO
  Chrome 18.0.1025.168 m

  
  JavaScript error
  -------------------------
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0 .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729;. MS - RTC LM 8; InfoPath.2;. NET4.0C;. NET4.0E)
  Timestamp: Sun, may 2, 2012 16:32 UTC

  
  Message: Object EXPECTED
  Online: 344
  Char: 2
  Code: 0
  URI: http://server1/robohelp/whphost.js

  
  Message: 'this.maCom...' is null or not an object
  Online: 171
  Char: 3
  Code: 0
  URI: http://server1/robohelp/whphost.js
  --------------------------

  After further research and testing, I found the update of security for RoboHelp 8 and 9 (http://www.adobe.com/support/security/bulletins/apsb11-23.html) posted as an ad that I had not seen before. I used the feature updates of the product, but that said I was informed and did not include this update.

  Both javascript in this update files solve the problem. The table of contents, index and search now appear.

  Update:
  As I studied the problem further (when writing this reply), I found files that are newer than the latest security patches, I was aware of that. In addition, I discovered that my security organization decided to patch with APSB12-04 I don't know. This patch is why my 8.0.0 installation magically stop working. I see the announcement of the security, the bulletin was not all the required components for specific, that the patch can be applied to 8.0.1 and 8.0.2). (8.0.0, Adobe, please give more information on the ballots of so that organizations that deploy auto will be forced to find out what is running before the update. Information such as whether they apply to all versions of Robohelp 8 or simply a specific version. If APSB12-04 was supposed to apply to all versions of 8, then it did not work. In fact, he broke my installation of 8.0.0 for the generation of webhelp, but a later installation of 8.0.1 and 8.0.2. It seems that they have done a better job for APSB11-23. Maybe the security updates should be a kind of service pack that has a plant and a cancellation process. Right now, my security organization has replaced the files based on the specification in the security bulletin.

  I'll try to patch with APSB12-04 new since I've updated version 8.0.2 database to see if I still have the webhelp. If I can't view the table of contents, I have to take off once more and be 'in non-compliance."

• Add text to the table of contents or the skin

  Hello

  I want to add text to the table of contents that shows all the time (is not clickable).  Is it possible to display some text of infomration on the bar of navigation/table of contents?

  Or is it possible to add it to a skin it will appear at the bottom of the screen?

  Any help would be appreciated.

  Thank you!

  Hi Julie,.

  You can try the project--> TOC--> Info it will open a dialog box where you can enter information about your organization, as well as a logo.

  In addition, if you wish, you can change a TOC and their default legend items.

  To do this, close Captivate.

  Open Notepad-

  Paste below-

  [TOCStrings]

  SlideTitle = Module name

  Time = time

  Status = status

  MoreInfo = my info

  Clear = Wipe

  ClearToolTip = State of Wipe

  BookMarkToolTip = book-marking

  NoSearch = String not found

  CurrTime = what

  ---------------------------------------

  Save it as TOCStrings.ini

  and place this file in the location of the Adobe Captivate installation on your machine.

  Now launch and add a table of contents to the Porject and preview or publish and see the change.

  Thank you

  Anjaneai

• Topics in several places in the table of contents

  Hi all
  
  I was wondering if it is possible to insert a topic more than once in the Table of contents? This is probably a strange request, but the problem occurred because I imported a manual written in Word, but the part of it contains information already in the RoboHelp project. I was wondering if I could erase the information duplicated in favor of a link to what was already there?
  
  Thanks in advance for your suggestions.
  
  See you soon,.
  
  darkagn

  Stone of right: the table of contents will be get synchronized with the trial (up and down) that he meets. However, you can use redirect pages to work around this problem.

  1 create a new topic (and name it target_topic_name_redirect.htm as a visual cue for yourself). The title is the same in the topic title target (which is the name that will appear in the table of contents).

  2 remove all text in the topic in WYSIWYG mode (leaving a blank page).

  3 al ' TrueCode, add this line to the other META tags (in any place).
  

  4 drag and drop the redirection page to where you want the TOC.

  Note: A value of 0 (zero) is the duration time (none) and this topic will be displayed before the redirection to the topic target. If you prefer to make this available to the viewer redirection, you can increase it to, say, 8 or 10 and provide a text like "pick up this section of the"Configuration"section. Please wait a moment. »

  Good luck
  Leon

• Is it possible to customize the sensitive presentation - sequence of the table of contents, Index, tabs filter?

  Hello

  I use RoboHelp 2015 and reactive production layout, I need to rearrange these tabs. I want the tab of filtering of dynamic content to be displayed before the table of contents.

  Is it possible to re - sequence tab filters before tab table of contents by making some backend work in CSS or code?

  

  Or the other way improved - if we select filters say - sales, then sales related subjects should be displayed (rather extended below - just like the expansion of text).

  Is it possible to customize the sensitive provision in this way?

  --

  Thank you

  Christophe

  It is possible through the HTML code. In Notepad, open the file "Topic.slp". On line 35, you will see a list of links:

  

  You can cut and paste the link to get the correct order. The first tag appears on the left side. Please be sure to cut and paste the entire link ''.

• Duplicate sections throughout the table of contents after generating the HTML5 multiscreen output

  Use: RoboHelp 10, version 10.0.0.287

  Steps to reproduce the problem:

  1. click on file > create > main layout (Multiscreen_HTML5)

  2 al ' Generate window click on [Save and Generate]

  3. wait

  4. click on [view results]

  5 results show swathes of the table of contents reproduced in other sections.  10 more times to repeat the generation before that the entire table of contents points are correct and I can publish.  This is not preventing me from doing the job, but it's certainly a time killer.

  Background: I inherited a working version.  I did not create it.  I have more knowledge of the HTML language, but I'm not a developer.  I didn't upgrade beyond RH10 option.  I have studied this many times, but have not been able to find a solution.  The only other thing I've seen sometimes are error messages related to the toctree.js file, but I still don't understand those.  Even when I have not, this past yet, but I have included this error just in case it may be related, although I suspect that it is a separate issue.  I don't currently have the line in the js file because this sample is old and I have not seen the question at least a month.

  Other Notes: I've seen a few posts on a similar question in the printed version, but, I do not have a printed version.  I don't know if that makes a difference, and do I know if anyone in the past that put in place or even where to go to watch.

  

  

  Try to move the project to somewhere that the path is not so long and generate a new folder.

  See www.grainge.org for RoboHelp and Authoring information

  

  @petergrainge

• Stacked canvas and tab canvas placed on the table of contents?

  Oracle forms 6i:

  Hi all, I am developing a form .in this I created four paintings there is

  1. table of contents

  2 canvas tab

  3 stacked canvas

  4 stacked canvas fixed field

  Here I try placed three paintings on the content canvas.i open the table of contents and here I placed all three paintings to help

  Display - > stacked views option.after, saving the form and close the content canvas.again I open the table of Contents tab stacked canvas and stacked canvas fixed field the two paintings are disappears.these paintings go to back (hide) of the canvas of the tab.

  any body please help me how to solve the problem...

  Here I am attaching how my form want to look like this.
  

  

  
  

  I attach here how can I get...

  
  

  
  

  
  

  Please help someone
  

  Kind regards

  Stevie

  The fact that you have used the utility of 'Stacked view paintings' the constructor for hide or display a canvas has nothing to do with how the form is saved or executed.  The ZOrder (stacking order) of the paintings works exactly as it does for data-block objects.  If your 'stacked' canvas is listed below your Web 'tab' in the browser of the object then the stacked will be presented behind the tabs.  If you want the stacked to appear always on top and then in the object Navigator drag it above the tabs.

  When running, you control the paintings using SHOW_VIEW and HIDE_VIEW.  However, I understand that you can't HIDE a view if the cursor is positioned in an object on the canvas.  You must move the cursor first, then HIDE the view/canvas.