A way to send and receive the SMS messages on ThinkPad T440 with Sierra EM7345
I have a T440 with Sierra LTE. It works fine to connect to mobile networks.
But here in New Zealand, one of our suppliers also provides free wifi hotspots to customers on certain plans. To use this property, I have to enter a password which is sent to me by SMS.
Is it possible that I can display SMS messages sent to the SIM card inside my laptop?
Now, I need to remove the SIM card from my ThinkPad (with all the hassles that implies), paste it into my phone, get the password, then transfer the SIM card in my ThinkPad (and often do not, it is y no food taken located nearby, so I can't restart because I had to disable the internal battery during the installation/uninstallation of the SIM card).
So, if someone can point to a way I can just see these SMS messages on my ThinkPad, I'm grateful enernally.
Tags: ThinkPad Notebooks
Similar Questions
-
Cannot send and received the error windows live mail 3219
Cannot send and received the message of error windows live mail 3219 how remedy
You use a hosted Microsoft e-mail address.
Microsoft doesn't want you using a program like WLM. I know, they created it, but they changed their minds. They want to be able to use their webmail system so that they can put ads in your face and you profile by reading your emails. They try to get you migrated to Windows 10 and the e-mail program integrated here.
Most of my clients with addresses hosted Microsoft migrated far by pulling on the other non-Microsoft like Gmail or Yahoo mail addresses.
WLM will work perfectly with these addresses. Well more than half of my computer 150 customer use WLM 2011 version and it works very well.
-
Hi, I try to connect to hotmail and received the following message ' sorry, there's a problem with Hotmail right now Hotmail was not able to complete this application. Microsoft may contact you about any matter that you declare "what steps should I take as I have urgent e-mail to check." THX
Hello
Looks like a temporary problem.
Answers is a peer group supported and unfortunately has no real influence on Hotmail.
HotMail has its own Forums, so you can ask your questions there.
Windows Live Solution Center - HotMail - HotMail Forums Solutions
http://windowslivehelp.com/Hotmail - Forums
http://windowslivehelp.com/forums.aspx?ProductID=1Hotmail - Solutions
http://windowslivehelp.com/solutions.aspx?ProductID=1How to contact Windows Live Hotmail Support
http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htmWindows Live Hotmail Top issues and Support information
http://support.Microsoft.com/kb/316659/en-usError message "your account has been locked" when trying to connect
http://windowslivehelp.com/thread.aspx?ThreadId=77be7d82-a0e9-49c7-b46d-040ec654a9e2Compromised account - access unauthorized account - how to recover your account
http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41Hotmail hacked? Take these steps
http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Wireless drops IE7 but emails still send and receive the Satellite Pro L20
I will try to write this, so it is logic-
Satellite Pro L20
Card Atheros AR5005G Wireless - Driver version 7.6.0.130
Windows XP, Office 2003, IE 7,.
Router Netgear WGR614 v6 wirless.
When using a product like Utorrent my conection sharing internet it falls P2P file comes with - cannot display the page - usually I select the network diagnostics and he responds with consult the manufacturer of your computer for help.
E-mails still send and receive ok - my wife on her cell phone can still access internet ok (so I don't think it's a fault of router)
After I close the application down and let it during 5 minutes to share files so I can access the internet. If I connect directly to the router via a cable that I have all of the problems that makes me think it's a fault of the wireless adapter
Can anyone help?
Thank you very much
Alex
Hello
Eventually the large amount of data that occurs during the influences of P2P file sharing or Skype session of the internet connection.
Sometimes this question is displayed on my laptop if 2 or three laptops are connected to the same router.
However, have you tried a few solutions stallions like WLan driver updated for example?
Please check the Toshiba Wlan portal and install the latest version of the driver:
http://APS.toshiba-tro.de/WLAN/Good luck
-
Bluetooth, send and receive the option
I got my lenovo ideapad y510 p 2 days I tried bluetooth once it was working, but after upgrade to win 8.1 didn't send or receive option in the bluetooth icon menu I reinstalled bluetooth driver please I help me I can't send or receive anything via bluetooth
OK thanks I could solve my problem acually the solution was easier than I imagined
Just delete the programs bluetooth driver and do not install again and I have the option in the menu and now be able to send and receive very normally
-
By copying and pasting the SMS messages?
Tho not a huge to me other than being like "ha!" HA! "I told you, I know you said that" to my girlfriend, I can see how this can be huge for others.
Someone at - he found a way to copy and paste previous text messages (or perhaps even to 'transfer' the SMS)? The ONLY thing I can think is to take a screenshot of the application (orange button + symb, then press p) with the text I want to copy. Then send it to the user... problem with this is good... it is a table and not text. All solutions?
Now you can copy only and editable field and since it is text that has already been sent/received you can not modify it and thus can not copy him.
With respect to the transfer of a text message, there is not the ability to do but either.
-
Just bought an iMac and PS charged thereon. Had a photo retouched I wanted to save and received this message, "... write access has been failed." Called Apple, thinking it was a problem with the admin and discovered that all the parameter were correct on the side of Apple. Any recommendations?
papaK
Salute to Colorado,
It seems that the location where you want to save this document in Photoshop.
Ensure that the save location is correct and has full permissions.
You can try to save the document and check if it works.
Kind regards
Claes
-
Slow with the sending and receiving of Skype messaged in group chat
Seems to have no problem with ordinary a shat, but when I'm in a discussion group that it takes a lot of time for my message be sent it is just gray and have this loading circle to the left.
Also, some messages are received several minutes once they are written to the original, make a group of very confused discussion throughout...TIME ZONE - US EAST. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest version of Skype: Windows & Mac
If my advice helped to solve your problem, please mark it as a solution to help others.
Please note that I usually do not respond to unsolicited private Messages. Thank you. -
How to have an Oracle procedure send and receive the value of a java program.
The procedure below is the place within a package. This "get_extract_ready_headers" procedure to select the columns store_number, terminal_number, tran_number, tran_date, cust_id in the REX_HEAD_EXTRACT of source table. This information is selected in a ref cursor The data were field cust_id which is encrypted. How can I change the get_extract_ready_headers procedure and accomplish 2 things?
1. make this procedure the "cust_id" reading the table source and send the value of a Java program "getheaderinfo" (this java program decrypts the cust_id field).
2. when we get the value unencrypted to the Java program, make the procedure to accept this decrypted value and use it to update the CUST_ID to the table TRAN_HEAD table value target. I use Oracle 11.2.0.2 and TOAD 10.5.1.3.
-The code of procedure
-Table Structure for the table source REX_HEAD_EXTRACTPROCEDURE get_extract_ready_headers (p_records OUT SYS_REFCURSOR) IS BEGIN OPEN p_records FOR SELECT store_number, terminal_number, tran_number, tran_date, cust_id FROM REX_HEAD_EXTRACT; END;
-Create table DDL for the target TRAN_HEAD tableCREATE TABLE REX_HEAD_EXTRACT ( REX_SEQ_NBR NUMBER(20), REVISION_NUMBER NUMBER, DAY NUMBER(3), RESA_TRAN_SEQ_NO NUMBER(20), BUSINESS_DATE DATE, TRAN_SEQ_NBR NUMBER(12), ORG_NUMBER NUMBER, STORE_NUMBER NUMBER, TRAN_DATE DATE, TERMINAL_NUMBER NUMBER, TRAN_NUMBER NUMBER, TRAN_TIME DATE, BATCH_NUMBER VARCHAR2(8 BYTE), BATCH_TYPE VARCHAR2(4 BYTE), TRAN_TYPE VARCHAR2(4 BYTE), SUB_TRAN_TYPE VARCHAR2(4 BYTE), CLERK_CODE VARCHAR2(15 BYTE), TRAN_TAXABLE_AMOUNT NUMBER(12,2), TRAN_TAX_TOTAL NUMBER(12,2), TRAN_GROSS_TOTAL NUMBER(12,2), COUP_TOTAL NUMBER(9,2), MKD_TOTAL NUMBER(9,2), EMPLOYEE_NUMBER VARCHAR2(15 BYTE), EMPLOYEE_NAME VARCHAR2(40 BYTE), TRAN_ALTTAXABLE_AMOUNT NUMBER(12,2), TRAN_ALTTAX_TOTAL NUMBER(12,2), SALE_AMOUNT NUMBER(9,2), RETURN_AMOUNT NUMBER(9,2), RETURNED_AMOUNT NUMBER(9,2), NETCASH NUMBER(12,2), TENDER_CODE VARCHAR2(4 BYTE), MULT_RCPT VARCHAR2(1 BYTE), SPLIT_TENDER VARCHAR2(1 BYTE), RTN_WITH_PURCHASE VARCHAR2(1 BYTE), RTN_WITH_RCPT VARCHAR2(1 BYTE), REASON_CODE VARCHAR2(4 BYTE), PASSWORD VARCHAR2(10 BYTE), RINGTIME DATE, CUST_NUMBER VARCHAR2(12 BYTE), CUST_ID VARCHAR2(50 BYTE), ZIP_CODE NUMBER, POSTAL_CODE VARCHAR2(9 BYTE), PV_TIME_LAPSE NUMBER, ORIG_STORE_NBR NUMBER, ORIG_TRAN_DATE DATE, ORIG_TRAN_TYPE VARCHAR2(4 BYTE), ORIG_TERM_NBR NUMBER, ORIG_TRAN_NBR NUMBER, ORIG_SALE_AMT NUMBER(12,2), ORIG_TENDER_CODE VARCHAR2(4 BYTE), ORIG_CLERK_CODE VARCHAR2(15 BYTE), PREV_TRAN_TYPE VARCHAR2(4 BYTE), PREV_SUB_TRAN_TYPE VARCHAR2(4 BYTE), GIFT_REGISTRY_ID VARCHAR2(25 BYTE), NO_OF_ITEMS NUMBER, TAX_EXEMPT_ID VARCHAR2(18 BYTE), TRAN_RINGTIME NUMBER, AUDITED VARCHAR2(1 BYTE), BATCH_VERSION NUMBER(9,2), BATCH_SOURCE VARCHAR2(5 BYTE), CREATE_DATE DATE, CREATE_ID VARCHAR2(32 BYTE), CREATE_PROC VARCHAR2(32 BYTE), MOD_DATE DATE, MOD_ID VARCHAR2(32 BYTE), MOD_PROC VARCHAR2(32 BYTE), TERMINAL_GROUP NUMBER, USER_DEF_1 NUMBER, USER_DEF_2 NUMBER, USER_DEF_3 NUMBER, USER_DEF_4 NUMBER(12,2), USER_DEF_5 NUMBER(12,2), USER_DEF_6 NUMBER(12,2), USER_DEF_7 VARCHAR2(50 BYTE), USER_DEF_8 VARCHAR2(50 BYTE), USER_DEF_9 VARCHAR2(50 BYTE), MANAGER_NUMBER VARCHAR2(15 BYTE), MANAGER_REASON_CODE VARCHAR2(10 BYTE), MANAGER_SWIPED VARCHAR2(1 BYTE), PHONE_NO NUMBER(11), KCPOS_KTH_USER_101 NUMBER, KCPOS_KTH_USER_102 NUMBER, KCPOS_KTH_USER_103 NUMBER, KCPOS_KTH_USER_104 NUMBER, KCPOS_KTH_USER_105 NUMBER, KCPOS_KTH_USER_106 NUMBER, KCPOS_KTH_USER_107 NUMBER, KCPOS_KTH_USER_108 NUMBER, KCPOS_KTH_USER_109 NUMBER, KCPOS_KTH_USER_110 NUMBER, KCPOS_KTH_USER_201 NUMBER(12,2), KCPOS_KTH_USER_202 NUMBER(12,2), KCPOS_KTH_USER_203 NUMBER(12,2), KCPOS_KTH_USER_204 NUMBER(12,2), KCPOS_KTH_USER_205 NUMBER(12,2), KCPOS_KTH_USER_206 NUMBER(12,2), KCPOS_KTH_USER_207 NUMBER(12,2), KCPOS_KTH_USER_208 NUMBER(12,2), KCPOS_KTH_USER_209 NUMBER(12,2), KCPOS_KTH_USER_210 NUMBER(12,2), KCPOS_KTH_USER_301 VARCHAR2(50 BYTE), KCPOS_KTH_USER_302 VARCHAR2(50 BYTE), KCPOS_KTH_USER_303 VARCHAR2(50 BYTE), KCPOS_KTH_USER_304 VARCHAR2(50 BYTE), KCPOS_KTH_USER_305 VARCHAR2(50 BYTE), KCPOS_KTH_USER_306 VARCHAR2(50 BYTE), KCPOS_KTH_USER_307 VARCHAR2(50 BYTE), KCPOS_KTH_USER_308 VARCHAR2(50 BYTE), KCPOS_KTH_USER_309 VARCHAR2(50 BYTE), KCPOS_KTH_USER_310 VARCHAR2(50 BYTE), KCPOS_KTH_USER_401 DATE, KCPOS_KTH_USER_402 DATE, KCPOS_KTH_USER_403 DATE, DISC_TOTAL NUMBER(9,2) ) CREATE INDEX REX_HEAD_EXTRACT_NDX ON REX_HEAD_EXTRACT (REX_SEQ_NBR, REVISION_NUMBER, STORE_NUMBER, TRAN_DATE, TERMINAL_NUMBER, TRAN_NUMBER)
-SamplesCREATE TABLE NAVISTOR.KCPOS_TRAN_HEADER_BASE ( TRAN_SEQ_NBR NUMBER(12), ORG_NUMBER NUMBER, STORE_NUMBER NUMBER, TRAN_DATE DATE, TERMINAL_NUMBER NUMBER, TRAN_NUMBER NUMBER, TRAN_TIME DATE, BATCH_NUMBER VARCHAR2(8 BYTE), BATCH_TYPE VARCHAR2(4 BYTE), TRAN_TYPE VARCHAR2(4 BYTE), SUB_TRAN_TYPE VARCHAR2(4 BYTE), CLERK_CODE VARCHAR2(15 BYTE) NOT NULL, TRAN_TAXABLE_AMOUNT NUMBER(12,2), TRAN_TAX_TOTAL NUMBER(12,2), TRAN_GROSS_TOTAL NUMBER(12,2), COUP_TOTAL NUMBER(9,2), MKD_TOTAL NUMBER(9,2), EMPLOYEE_NUMBER VARCHAR2(15 BYTE), EMPLOYEE_NAME VARCHAR2(40 BYTE), TRAN_ALTTAXABLE_AMOUNT NUMBER(12,2), TRAN_ALTTAX_TOTAL NUMBER(12,2), SALE_AMOUNT NUMBER(9,2), RETURN_AMOUNT NUMBER(9,2), RETURNED_AMOUNT NUMBER(9,2), NETCASH NUMBER(12,2), TENDER_CODE VARCHAR2(4 BYTE), MULT_RCPT VARCHAR2(1 BYTE), SPLIT_TENDER VARCHAR2(1 BYTE), RTN_WITH_PURCHASE VARCHAR2(1 BYTE), RTN_WITH_RCPT VARCHAR2(1 BYTE), REASON_CODE VARCHAR2(4 BYTE), PASSWORD VARCHAR2(10 BYTE), RINGTIME DATE, CUST_NUMBER VARCHAR2(12 BYTE), CUST_ID VARCHAR2(50 BYTE) ENCRYPT USING 'AES256' NO SALT, ZIP_CODE NUMBER, POSTAL_CODE VARCHAR2(9 BYTE), PV_TIME_LAPSE NUMBER, ORIG_STORE_NBR NUMBER, ORIG_TRAN_DATE DATE, ORIG_TRAN_TYPE VARCHAR2(4 BYTE), ORIG_TERM_NBR NUMBER, ORIG_TRAN_NBR NUMBER, ORIG_SALE_AMT NUMBER(12,2), ORIG_TENDER_CODE VARCHAR2(4 BYTE), ORIG_CLERK_CODE VARCHAR2(15 BYTE), PREV_TRAN_TYPE VARCHAR2(4 BYTE), PREV_SUB_TRAN_TYPE VARCHAR2(4 BYTE), GIFT_REGISTRY_ID VARCHAR2(25 BYTE), NO_OF_ITEMS NUMBER, TAX_EXEMPT_ID VARCHAR2(18 BYTE), TRAN_RINGTIME NUMBER, AUDITED VARCHAR2(1 BYTE), BATCH_VERSION NUMBER(9,2), BATCH_SOURCE VARCHAR2(5 BYTE), CREATE_DATE DATE, CREATE_ID VARCHAR2(32 BYTE), CREATE_PROC VARCHAR2(32 BYTE), MOD_DATE DATE, MOD_ID VARCHAR2(32 BYTE), MOD_PROC VARCHAR2(32 BYTE), TERMINAL_GROUP NUMBER, USER_DEF_1 NUMBER, USER_DEF_2 NUMBER, USER_DEF_3 NUMBER, USER_DEF_4 NUMBER(12,2), USER_DEF_5 NUMBER(12,2), USER_DEF_6 NUMBER(12,2), USER_DEF_7 VARCHAR2(50 BYTE), USER_DEF_8 VARCHAR2(50 BYTE), USER_DEF_9 VARCHAR2(50 BYTE), MANAGER_NUMBER VARCHAR2(15 BYTE), MANAGER_REASON_CODE VARCHAR2(10 BYTE), MANAGER_SWIPED VARCHAR2(1 BYTE), PHONE_NO NUMBER(11), KCPOS_KTH_USER_101 NUMBER, KCPOS_KTH_USER_102 NUMBER, KCPOS_KTH_USER_103 NUMBER, KCPOS_KTH_USER_104 NUMBER, KCPOS_KTH_USER_105 NUMBER, KCPOS_KTH_USER_106 NUMBER, KCPOS_KTH_USER_107 NUMBER, KCPOS_KTH_USER_108 NUMBER, KCPOS_KTH_USER_109 NUMBER, KCPOS_KTH_USER_110 NUMBER, KCPOS_KTH_USER_201 NUMBER(12,2), KCPOS_KTH_USER_202 NUMBER(12,2), KCPOS_KTH_USER_203 NUMBER(12,2), KCPOS_KTH_USER_204 NUMBER(12,2), KCPOS_KTH_USER_205 NUMBER(12,2), KCPOS_KTH_USER_206 NUMBER(12,2), KCPOS_KTH_USER_207 NUMBER(12,2), KCPOS_KTH_USER_208 NUMBER(12,2), KCPOS_KTH_USER_209 NUMBER(12,2), KCPOS_KTH_USER_210 NUMBER(12,2), KCPOS_KTH_USER_301 VARCHAR2(50 BYTE), KCPOS_KTH_USER_302 VARCHAR2(50 BYTE), KCPOS_KTH_USER_303 VARCHAR2(50 BYTE), KCPOS_KTH_USER_304 VARCHAR2(50 BYTE), KCPOS_KTH_USER_305 VARCHAR2(50 BYTE), KCPOS_KTH_USER_306 VARCHAR2(50 BYTE), KCPOS_KTH_USER_307 VARCHAR2(50 BYTE), KCPOS_KTH_USER_308 VARCHAR2(50 BYTE), KCPOS_KTH_USER_309 VARCHAR2(50 BYTE), KCPOS_KTH_USER_310 VARCHAR2(50 BYTE), KCPOS_KTH_USER_401 DATE, KCPOS_KTH_USER_402 DATE, KCPOS_KTH_USER_403 DATE, DISC_TOTAL NUMBER(9,2), RTA_RTN_AUTCOD VARCHAR2(4 BYTE), RTA_RTN_COMMID NUMBER, RTA_RTN_EVNTID NUMBER, RTA_RTN_QTY NUMBER, RTA_RTN_RCPT_SCAN VARCHAR2(1 BYTE), RTA_RTN_REFUND_AMT NUMBER(9,2), RTA_RTN_TYPE_CODE VARCHAR2(4 BYTE), RTA_RTN_WITH_RCPT VARCHAR2(1 BYTE), RTA_RTN_COUNT INTEGER, SDEDVAL1 VARCHAR2(50 BYTE) )
REX_SEQ_NBR,REVISION_NUMBER,DAY,RESA_TRAN_SEQ_NO,BUSINESS_DATE,TRAN_SEQ_NBR,ORG_NUMBER,STORE_NUMBER,TRAN_DATE,TERMINAL_NUMBER, TRAN_NUMBER,TRAN_TIME 478,1,11,12024005,6/11/2012,,1,692,6/11/2012,155,5,6/11/2012 12:57:17 PM, 479,1,11,12024006,6/11/2012,,1,692,6/11/2012,155,6,6/11/2012 2:01:51 PM, 480,1,11,12024007,6/11/2012,,1,692,6/11/2012,155,7,6/11/2012 2:47:10 PM
Then you describe two stored procedures separated. One that has an OUTPUT parameter which is a SYS_REFCURSOR (that you posted initially). And will need you a second procedure that takes as a parameter IN the decrypted CUST_ID and whatever: key (s) is required for the UPDATE is generated.
Justin
-
To the test. The last time I tried to send this qustion access was denied and I've lost the value of one hour of work.
WiFi hotspot is the likely cause.
http://www.nowiressecurity.com/articles/protecting_connections_at_wi-fi_hotspots.htmMaybe the server is configured to block ports, but it will access http through a browser.
or maybe something like this has happened.
Internet service providers will be blocking IP addresses where spam is known to come from in the past. They use services list to identify these IP addresses. If the mobile home park is set to the index, Park mobile home ISP is blocking the mobile home park may be totally unaware of the problem.http://en.Wikivoyage.org/wiki/Internet_access
Some web access points will restrict access to known as host webmail sites. Include a few research libraries, universities and private companies wishing to discourage users to check their personal email during working hours. However, almost all Internet cafes and other public access points will allow you to access your webmail: for many of their users, webmail is the reason why they are here.Using the e-mail software for Outlook, Lotus Notes or Thunderbird or Mac's Mail.app may be restricted if your ISP or access point blocking access or requires access through a proxy server.
-
Hello, I am able to pick up the near devices via bluetooth, but cannot send receive anything of my friends via bluetooth. How can this problem be solved?
Tap the device. It should prompt you to enter a pin code. You can enter one or not. If you don't do that you enter the same on the other device. Once the two parties to fill this partnership is created.
Message is about: Treo 800w (Sprint)
-
I would like to be able to use the vista windows live to send and receive e-mails. I spent time with a representative and still can't send or receive.
Hi Karin,.
If your concerns are with respect to Windows Live Mail, I suggest you post on the Windows Live forums as it can get you the answer you're looking for.I hope this helps. -
How to use windows 8 to send and receive faxes
Dear Sirs,
My computer is running in the windows operating system 8.
Could you help me put up my computer so that I can use it to send and receive faxes.
Thank you.
Kind regards
Yoon Choy Loo
Hi Yoon Choy Loo,
Thanks for posting in Microsoft Communities.
After your description, I understand that you need help setting up the windows 8 in order to send and receive faxes. Let me help you with it.
Please follow the steps below to configure the fax:
- Hold the Windows key + C and type Fax and press ENTER.
- The Fax Configuration Wizard starts. Click Next.
- On the sender information page, type the information that you want to appear on your fax cover page. You don't have to fill in all the boxes. Then, click Next.
- The Fax Configuration Wizard displays the Select Device page to send or receive faxes. If you want to be able to receive incoming faxes, check the box to receive. If the telephone line you logged on to your computer is for faxes only, click on answer automatically after. If you want to manually answer incoming faxes, click Manual answer. Then, click Next.
- On the page of the Subscriber Identification (TSID), type the information you want in the TSID box. In general, it is a company name or your name and fax number. Click Next.
- On the page of the Subscriber called (CSID), type your information in the CSID box. The CSID that you enter is displayed on the fax machine of the origin of the fax. This number allows you to confirm that you send the fax to the right recipient. The CSID is usually the same as the TSID. Click Next.
- In the Routing Options page, choose whether you want to automatically print a fax. If you do not automatically print incoming faxes, they will be available in the Fax Console. Select Print on check box if you want each fax that you receive to be automatically printed. Then, click Next.
- End the SCW fax page, click Finish.
- The Fax Configuration Wizard closes and opens a Windows security alert. If you are prompted, click on unlock.
- Your computer is now ready to send and, possibly, to receive faxes. You can use the fax to go through the incoming or outgoing faxes, or upon receipt of a fax manually.
Please follow the steps below to use the fax on windows 8:
- Open the document, Web page, or e-mail to fax.
- On the file menu, click on print.
- In the print dialog box under Select printer, click Fax, and then click on print.
- In the welcome in the Send Fax Wizard page, click Next.
- On the recipient information page, type the name of the recipient in the box to type the recipient fax number in the fax number box. If you want to send the fax to more than one recipient, type the recipient information in the appropriate boxes, and then click Add. The recipient appears in the list and the areas are cleared so that you can enter additional information about the recipient. When you have finished adding recipients, click Next.
- On the preparation, the cover Page, select Select a page template to cover with the following information box. Click on the model in the cover page template list. Fill area of subject line and, eventually, the box Notes . Then, click Next.
- On the schedule page, click Next.
- End Send Fax Wizard page, click Finish.
The above steps will help you set up your fax machine and use the feature in windows 8.
I hope that the information above helps you. Answer please come back for additional assistance.
-
PC crashed and get the error message: 0 x 80244019 XP
Just formatted my pc after it crashed and now I can't update and receive the error message. 0 x 80244019. thank you
Please check the thread below for a possible solution: data- tricky300 - a regular contributor here:
This is the full installer you need, ignore the warnings about it being for COMPUTER technicians.
The current time and the date now in Eritrea is
19:36Wednesday, March 27, 2013
Standard time + 0300 UTCUTC/GMT is 16:36 on Wednesday, March 27, 2013
Current weather conditions in AsmaraPartly cloudy31 ° C / 88 ° F -
I can only use iMessage on my new iPad Air 2 with other Apple users. Why can't send and receive text messages with SMS people?
You need an iPhone and then use continuity iOS features to do - continuity use to connect your iPhone, iPod touch and Mac - Apple Support
An iPad is natively unable to send SMS text messages such as those that require a connection of cellular voice channel.
Maybe you are looking for
-
Why can't change Vista of French language in Chinese
I just bought a new computer in France with a Vista but I couldn't make the language of the French to ChineseCan someone tell me what I please!
-
None of RNS, te0 &; te1 clock source work except OnbordClock for cDAQ9174?
acquisition system used: cDAQ-9174, NI9206, Labview2009, OR-DAQmx 9.2, MAX 4.7.1 Referring to the "specifying different sample rates for CompactDAQ Modules multiple", following time engines could be used for cDAQ9174 (AI, te0 & te1) / cDAQ1/I/SampleC
-
Hello guys,. I've recently updated 4.4.4 5.02. All right, except that I made my backup "backup and restore" app on my Z2 4.4.4. Now the problem is, 5.02 B & R specific app that my file is now inconsistent. I searched Google for any work around and tr
-
See the other languages on win 7 without changing the settings system locale
need to download a program in Chinese as part of my research. my system is unable to read the characters that it comes out in symbols. many have suggested to change system locale and restarting the issue. But this isn't a viable option, because the C