Similar Questions

• I use an analog input on a PCI-6224 and are having problems with the clock source

  I use an analog input on a PCI-6224 and are having problems with the clock source. I'm trying samples of 16 different analog inputs very quickly. I have the sample mode: Timed Single Point material. The rate, that I am running is the maximum (250 kHz (15625Hz per channel)). I left the default clock source and trying to taste several times. The analogue input works for a short time (2-3 seconds) and then everything stops. I'm doing something wrong or is there something I'm missing? Any advice would be great.

  That's how you samples using the sample clock clock. If you see a delay then something is wrong with how you track/data visualization.

  Single point NI the hardware is for PID control with a real-time operating system.

• Requested sample clock source is invalid wls-9163

  My goal is to use two accelerometers that using the NI 9234 entry of the modules and wireless wls-9163 chassis.

  My program is attached. Here is a photo in case you do not want to download the attachment: http://www.imagebam.com/image/577a4a195651371.

  The slave device is not able to use the sample clock that came out of the master on PFI1.
  I looked through the wireless DAQ resource kit and watched the following video:

  http://www.YouTube.com/watch?v=g_8jiKuKeDI

  and ive read this: http://zone.ni.com/devzone/cda/epd/p/id/6124

  I am aware that

  I also tried to synchronize two cDAQ-9178 using the same methods. I always get the error "required sample clock source is not valid.

  The manual says it should be able to do this

  http://www.NI.com/PDF/manuals/372488c.PDF

  Any help would be greatly appreciated.

  Vexis,

  Unfortunately, at the moment, you cannot synchronize the modules that use adelta-sigma converter (such as the NI 9234) in several cDAQ chassis. This is because these modules use a clock of sampling, which is very high; the PFI lines are unable to return to the required sample clock. You can share the start triggers, but the clocks of individual modules will drift over time.

  The reason that the error message says that "requested the sample clock source is not valid" is because these modules require the use of a sample of clock that comes inside a time base clock oversampling.

  Sorry for the bad news!

  Katie

• FPGA and external clock Source

  By using a PXI-7854R, is it possible to run a process on an external clock source? As far as I know, you could potentially bringing the external clock to one of the triggering RTSI lines. Is this correct? Is it possible to route through one of the connectors on the PXI-7854R? If this isn't the case, I also have a PXI-6229. Can the external clock be routed to the RTSI through the PXI-6229 and then line for the PXI-7854R to run the process?

  Hello

  Unfortunately not, as noted hereand here. The best solution is just the external clock with DIO on a structure of case to door. While this will not have any type of phase synchronization and you may miss the clock cycles depending on how long and how fast your external clock is running (not really an option). I hope that answers your question.

• Message "Non-genuine Windows" & Windows Update does not work after replacing the RAM.

  Hello

  I have a PC desktop HPE-170 a current running Windows 7 Home Premium SP1, which has been installed on the machine by the store where I bought it. It has been properly activated and has worked very well for 18 months or more.

  The other day it decided to not start and a computer savvy friend corrected the problem by removing the RAM memory cards, clean the gold plated connectors and re - insert the. This fixes the problem and it started again.

  Today I received a message on the computer of Microsoft saying "your copy of Windows is not genuine" and he invited me to "solve online. Well, click on the 'My Computer' icon showed me that windows was still active.

  By clicking on the "solve Online" link took me to a validation page, where after she tried to validation, it says "The Validation failed" and advised me to buy another copy of Windows 7 HP for AUD $149. Gee, thanks, but no thanks Microsoft. I clicked on cancel and the non-genuine message has not yet reappeared.

  I also found now that Windows Update doesn't work that way.

  I rang MS that says that I need the Windows 7 Setup disk. When I said that I don't have one, they advised me to ring HP. I didn't have time to complete the phone call from HP, but I believe that HP wants me to reset the system to factory with them State guide me by phone.

  I have a genuine copy of Windows, a product key, and it shows as activated.  From what I understand the system think that I tried to put my copy of Windows 7 on a new computer or similar? I'm not sure.

  Is it really difficult to get the system works just like before?

  Thanks for the reply.

  I'm afraid I don't understand your instructions. I think that you are a fair way waiting for me in the issues of tech savvy.

  I think I have stumbled upon something here; http://support.HP.com/us-en/document/c02219204

  Download and update this driver seemed to do Windows Update includes itself.

  I can now go here; realwww.microsoft.com/ /validate/ and he says: "Welcome to Windows".

  I hope I now get no more fake messages on my OS Windows is non-genuine.

  I'll see what happens tomorrow.

  Last update 18/7: seems to be fixed, no more problems.

• None of my restore points will not work. He directed the restoration of the system and that it recharges, but says system has not been restored.

  None of my restore points will not work. He directed the restoration of the system and that it recharges, but says system has not been restored.

  What is your system brand and model?

  What is your Version of XP and the Service Pack?
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)?  System Restore is not a time machine, but of course, this should work if you think you need.
  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.

  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.
  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.
  That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
  Give these ideas some consideration if they apply to you.
  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.
  No matter what you use for protection against malware, I do so and then only begin to solve any problems:
  Download, install, update and do a full scan with these free malware detection programs can solve any problems:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.

  The scans by operating clean, reboot, test and we can fix any other issues

• System clock stops working

  The clock stopped working as soon as I close my sytem. When I restart is watch the time I closed the last.

  However, on the Internet and upsating, it gives the current time.

  I think your motherboard battery is dead. Replace the battery and set the duration of BIOS setting, hope this can solve your problem.

• None of my function keys (F1 - F12) works with the exception of the ESC key. They worked fine yesterday, but now they do not have. How can I fix this?

  None of my function keys (F1 - F12) works with the exception of the ESC key. They worked fine yesterday, but now they do not have.

  How can I fix this?

  I use the SHIFT + F7 work much and would really appreciate help in getting up and running.

  Thank you

  Check if you have an F LOCK key in the top right of your keyboard.

  If this is not the case, try a system restore:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  Mick Murphy - Microsoft partner

• CS4 on Windows 10 seems to be broken... at least I can't clone. Before that, Silver FX and the related add ons did not work. I would like to remove and re-install Photoshop CS4 on Windows 10, but I'm afraid that none of these upgrade CD I will work t...

  CS4 on Windows 10 seems to be broken... at least I can't clone. Before that, Silver FX and the related add ons did not work. I would like to remove and re-install Photoshop CS4 on Windows 10, but I'm afraid that none of these upgrade CD I will work... they are all dependent on a previous installation. If I remove photoshop and try to use the CS4 install disc I have, it fails? Will I need to re - install Photoshop 5.5 and each single update since then go to CS4?

  You need not install older versions in order to get the last update enabled.  During the CS4 activation process, you can specify the eligible previous version (choose the oldest among a list, then enter its serial number).  Choose any one you had just before CS4.

• Cannot go beyond the Office in standard mode, various scenarios of (non-performance issues) freezing. Safe MODE works very well.

  Cannot go beyond the office longer. Freezes clicking on dialog boxes does nothing most of the time. Clicking on some dialog boxes will close them but leave the box empty and completely white out. The icon on the taskbar is different than what is on the desktop. Everything works fine in safe mode. I have worked on this for almost 3 weeks and have been asking for help. One of my diagnostic checks give several (IRQ) has not been defined in time. (OFOO:0132 or OFOO:XXXX)

  Running Vista 32-bit Basic. Did a restore of the system (not a full reboot) and he made sure the cursor to move to the desktop (but no result has produced most of the time) Unlike before where the cursor was just immediately frozen.  Also received DST short Test failed and OFOO:065 D. error reading disk-DST self-test. Do not forget that in Safe Mode, I can do everything very well. It's the only way I can access the internet. If anyone can help me I'll always owe to your kindness.

  Hello

  OFOO:065 D. errors of disk-DST Self Test Read Error DST short Test failed normally mean hard.

  See you soon.

• How can I fix a black and white screen on the air from my iPad? I rebooted it and ran the last updated IOS 9.2 on it. It is stuck and won't return to the color. All other functions work except this.

  How can I fix a black and white screen on the air from my iPad? I rebooted it and ran the last updated IOS 9.2 on it. It is stuck and won't return to the color. All other functions work except this.

  Have you checked the settings > General > accessibility > greyscale > power off.

  If this does not work ty settings > General > accessibility > zoom > on. Triple, tap the screen with three fingers. Tap choose filter. Click None. Triple, tap the screen to get rid of the menu zoom. If you have enabled greyscale in zoom you can disable it in zoom.

• T410i numbers do not work except the 5 and 6

  Having a problem with the normal numbers does not.

  This has nothing to do with them being dirty or who need to be replaced, nor is the number lock on.

  None of the numbers works except the 5 and 6.

  If I'm in firefox by typing in the google search bar when I press 1, for example, the keypad will beep, firefox will switch to full-screen mode and the text box will start to AutoFill with 1111111111. does any number is pressed. except the 5 and 6.

  Similarly if I am in word, except that it will bring up save as box and start to auto-fill in the name of population with 111111

  The only way I can type 1 at the present time is to use the on-screen keyboard.

  I've done the fn nmlk nmlk capslk, combos and is not her back.

  I restarted and it is always the same.

  Thanks for watching!

  I am running Win 7 pro

  the keyboard was defective. He had a small amount of cash months ago, and it took all this time to make the problem appear.

  a keyboard replacement and everything's fine. Thanks for the pointers!

• I currently have a website under Server 2003 IIS 6.0. I'm moving the site to server2008 R2 IIS 7.0. Everything works except the credit card verification.

  I currently have a website under Server 2003 IIS 6.0. I'm moving the site to server2008 R2 IIS 7.0. Everything works except the verification of the credit card at secure.authorize.net. I have a problem connecting to secure.authorize.net. I try to connect to secure.authorize.net via the browser without success. But I can connect to secure.authorize.net with any of the other computers on my network. It seems also secure.authorize.net is only the DNS I can't connect to with server20008. All of the suggestions.

  Source language

  Hi Melvin

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the following forums.

  Windows Server 2008 R2 General:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  The official Forums of Microsoft IIS: http://forums.iis.net/

  Concerning

• My VB2013 exe will not run the Task Scheduler but works very well for direct click in Explorer as well as a BAT file.

  The program is configured to run from a direct click using a text file specifying where the source files and destination.  Worked very well for a direct click or from the. BAT file.   It runs the Task Scheduler, I can see it appear in the Excel Task Manager when it is active.  But while it freezes.  He reads the spreadsheet looking for specific elements then output to a CSV text file.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• How to define JDBC Data Sources in Oracle MapViewer for Oracle database 12 c Release 1 (12.1.0.1)

  How to define JDBC Data Sources in Oracle MapViewer for Oracle database Release 1 (12.1.0.1) 12 c?

  Here is my setup in the conf\mapViewerConfig.xml:

  
  

  < name map_data_source = "mvdemo12".

  jdbc_host = "127.0.0.1".

  jdbc_sid = "orcl12c1".

  jdbc_port = '1522 '.

  jdbc_user = "mvdemo".

  jdbc_password = "7OVl2rJ + hOYxG5T3vKJQb + hW4NPgy9EN.

  jdbc_mode = 'thin '.

  number_of_mappers = '3 '.

  allow_jdbc_theme_based_foi = 'true '.

  Editable = "true" / >

  <!--  ****  -->

  But it does not work.

  After use "sqlplus mvdemo / [email protected]:1522 / pdborcl", it connected to the Oracle 12 c database.

  Anyone know it?

  Thank you

  11.1.1.7.1 use the jdbc_sid syntax, i.e.

  as described in the README file, mypdb1.foo.com

  -Sources of native data (no container) MapViewer can now use the service name of database instead of SID. To provide a db service name, you will use the same attribute of jdbc_sid, but specify the name of the service with double slashes in front, as follows:

  jdbc_host = "foo.com"

  jdbc_sid="//mypdb1.foo.com".

  jdbc_port = '1522 '.

  ... ...

  />

  Use a container_ds to the 11.1.1.7.0.

  that is, instead of using

  jdbc_host = "mydbinstance".

  jdbc_sid = "pdborcl12c".

  jdbc_port = '1522 '.

  jdbc_user = "mytestuser".

  jdbc_password = "m2E7T48U3LfRjKwR0YFETQcjNb4gCMLG8/X0KWjO00Q ="

  jdbc_mode = 'thin '.

  number_of_mappers = "6".

  allow_jdbc_theme_based_foi = "false".

  Editable = "false".

  />

  use

  container_ds = "jdbc/db12c.

  number_of_mappers = "6".

  allow_jdbc_theme_based_foi = "false".

  Editable = "false".

  />

  In my case the Glassfish 3.1.2.2 JDBC connection pool definition has been

  Property

  URL jdbc:oracle:thin:@mydbinstance:1522/pdborcl12c.rest_of.service.name

  Uncheck the wrap JDBC objects in advanced Panel, that is, the page properties change JDBC connection advanced pool.

  Add a resource to that newly created JDBC pool

  Use in mapviewerconfig.xml as above