A1-850 tablet is connected, charge light is on, but battery is not

Similar Questions

• My sony vaio vgn fw170j does not illuminate, the charging light turns on, but the computer does not light

  My sony vaio vgn fw170j does not illuminate, the charging light turns on, but the computer does not light

  Hi Heyoabc,

  Please resend your message main here.

  Nick-

• to change my earpiece and charger with the new, but they are not defective can I use guarantee of my iPhone to exchange them then?

  I bought my iPhone almost a year ago and he still has warranty valid

  If I want to get new headphones and charger but they are not otherwise defective

  so is it possible that I get new ones even if they are not defective?

  N ° guarantee replaces the defective do not part to which you have become dissatisfied.

• Have HP Photosmart b110 all in one series connected to my pc wireless, but it will not be printed

  Hi I have a series of all-in-one hp photosmart b110 it is connected to my wireless pc but it wont print I tried for days now, please can anyone help thanks

  Hi pauloldfield

  1. do you have the updated drivers installed for the printer?
  2. do you receive error messages when you try to print?
  3. What is the exact model of the printer number?

   

  You can check the links below and check out them if the steps to help you resolve the issue-

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows?T1=tab04

  
  You can also check the below link to get the latest drivers for the printer according to the model and verification number.

  http://WWW8.HP.com/th/en/support-drivers.html

   

  I hope this helps.

• HP G72 - computer laptop is plugged in and that the charge light appears on the side, will not turn on

  I have G - 72 laptop I've had for about a year now and just yesterday, I started having a problem where the laptop does not start? It is connected on the wall and the laptop and seeing load lights up blue and the computer does not start. I unplugged and still nothing?

  Don't know what to do?

  Hello

  Try a Hard Reset as follows.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the power button for a minute.  Reinsert the battery, connect the AC adapter and see if the laptop boots.

  Kind regards

  DP - K

• Satellite A30 - electric light flashes and the battery does not charge

  Hi guys,.

  I have the model above and recently, when I plug in my power cord to the back of the laptop instead of the usual constant green light loading, the indicator flashes and the light orange low battery always flashes as well.

  I have checked the plug, unplugged the power cord from the laptop and plugged back again but does not help. A few times it started loading so everything went well and now he again refuses to load.

  Any suggestions how I can solve this will be highly appreciated.

  Thank you.

  Dante

  Looks like a hardware problem

  Usually if the power light blinks then it does not sound good because the LED provides an error code which can be read by a technician for laptop

  But before you will contact the technician for laptop for help, try to do it:
  Remove the battery and unplug the AC adapter from the portable computer
  Wait about 20-30 minutes and then reconnect the two parts.

  Then try to turn on the laptop

  If it doesn t help that it s time for the call of the ASP

• I bought Outlook Express online and was charged $ 179.00 twice but it did not.

  I bought Windows Professional 2010 September and 3 December 2011, he wasn't on my computer, and because I need access to my email, I tried to download Outlook Express and I was charged $ 179.00 per Microsoft Stor/Bibit.  It will not download so I tried again and was charged another $179.00 and still it did not download.  December 4, I inserted the disc for Office Professional 2010 and ran a repair and was able to fix my 2010 program.  I would get a refund for the $358.00 I spent trying to download Outlook Express.

  Hello SuzanneRackett,

  Thanks for the reply!  You came on the Microsoft answers forum and we would have no documents or information on your purchase.  Advise you, you made this purchase through the Microsoft Online Store, I suggest you go to the link below for the Microsoft Online Store and speaking to someone out there.

  http://www.microsoftstore.com/store/msstore/DisplayHomePage

  Sales and support

  1-877-696-7786
  (1-877-MA-MS-BOUTIQUE

• charged to my card - but the photo not delivered!

  I was charged for all 4 photos, I wanted to buy, however, I was able to download 3 photos (even those that have been hard to find once downloaded) and the last photo I bought will not download. Only the preview with the watermark will be downloaded. I need an Adobe Stock person to contact me as soon as possible! Also-where is my e-mail received for my purchase?

  Hi Althea,

  I will recommend that you contact our customer service, don't forget to let them know that you did not find your receipts by e-mail. Sign in with your email address for the forum.

  https://helpx.Adobe.com/contact.html?step=Stok-Stks-STKM-STKL_membership-account-payment_p're-invoices-orders_stillNeedHelp

  There will be options to contact at the bottom of the page

  EBQ

• E8C34UA #ABA - Split X 2: Split HP X 2 - 2 plugged but battery does not charge

  Hello, I have a HP divided X 2 model number E8C34UA #ABA. I keep having a problem that says battery plugged 2 but not supported or 2 Bttery undetected. I see that other users of Split X 2 have the same Botr question, this issue has not been resolved. Any help would be appreciated.

  I was contacted by a case manager HP on the problems I've had. Even if my product is out of warranty, HP gave me a discount on the repair. They have replaced the battery inside the docking station and fixed another issue. I must say that I am very happy with HP and their representatives and will remain a loyal customer.

• Satellite A100: Battery does not charge

  I have a problem with the battery of high capacity on the Satellite A100-720. Accidentally I forgot the action of critical battery set to 'No action', so the battery got virtually completely discharged and now the laptop refuses to charge the battery. The orange light comes on, but the NHC program reports no load current and just on 0%.
  It is also strange that if I stop the laptop and unplug the power cable and then reinsert, it takes a second or two for the connector blue AC light upward and another a few seconds for the battery charging light illuminates... that's not happened before.

  Is there a way to fix this?

  Hello

  While the laptop is turned on and connected to the adapter try to remove the battery and put it back up shortly after. Look at what happens and we report.

  By the way: what is the number of the part of this battery high capacity you use with your Satellite A100?

• OfficeJet 150 battery will not Charge!

  I bought my printer in January this year and since then, so I didn't need to unplug it, so never really tested the battery before today. The bettery is attached to the rear, as described in the manual. The power meter indicates 0 onto the stack, and more strangely, the green charging light does not illuminate, but flashes when I remove the battery while the printer is attached to the sector. If the printer works fine wirelessly while that plugged but battery does not charge or hold the load. It is an old machine at 7months!

  The unit should still be in warranty, if it is seven months old. HP has a free one year standard warranty on its devices. Contact HP for warranty support.

  Troubleshooting guide indicates that if the product works without being connected to the battery, but not with the battery, then replace the battery is the recommended solution.

  If replacing the battery does not solve the problem then the power module has probably not.  The battery and the power unit are covered by the warranty.

• Sansa Clip Zip battery does not charge, goes directly to the screen of the song

  It's my third Sansa MP3 players.  The first was a Sansa Fuze with the round button.  Like that one but my husband needed more that I did it I gave it to him.  He is old, but the player is still so today.

  The second was a Sansa Fuze + with the touchpad.  The touchpad has been way too sensitive but I need to play only two songs for sleep therapy while I was fine with it until the battery suddenly stopped charging a few months ago, I posted my problems in the Sansa Fuze + forum.  After trying a few suggestions, I finally accepted that he was a Goner.

  I bought this Sansa Clip Zip 4 G, thinking that should last at least for a while because I use every day.  In fact, I needed only when I had disorders of sleep during the night;  I probably used it once every two weeks or more.  I used my cell phone to the device, had no problems until now.

  The last time that I loaded it was 2 weeks, to 98% full - the thing never indicated 100% while it was a little weird.  In any case, I had problems sleeping two nights ago so I took out the Clip Zip and noticed that the battery still had plenty of juice left.  This morning I checked the battery, he had 68%, but I thought I needed could again tonight so better it load up, just in case where.

  I connected it to my computer, but it did not show "connected" screen  Instead, he went straight to the last song I listened to.  I thought it was weird so I turned off the player then tried again.  Of course, he went directly to the screen of the song.  I noticed that the battery icon was showing 'filler '.  I thought that if I left it connected to the pc long enough IT would eventually deducted.  Two hours later, I checked the computer and it says that the drive battery was dangerously low.  I disconnected and then reconnected and this time he said 98% charged.  I loaded a bit more just in case so I used the player for about 15 minutes and the player turns off.  Plugged into the pc and now it says battery is extremely low, while the last hours do not charge the battery, but it drains pretty!

  My last attempt was to plug into a wall charger and guess what?  He went directly to the screen of the song once again.  Contrary to connect to the computer, I could actually turn off the player but this way does not charge the battery, or.   It's exactly the same problem as my second player, the Sansa Fuze +.

  I bought the last two players from Sansa, simply because I really liked the first which of course had been abandoned a long time ago.  I don't know if I have bad luck or it is just an issue joint Sansa players but one way or the other I don't buy any Sansa more in the future.  He is a big name that comes with the big disappointment!

  You can also try a reset by pressing and hold the power button for 20-30 seconds. Release it and then turn it on normally and see how it behaves.

  By your description of the message "dangerously low" you get then plug it into your computer, which tells me that you use MTP mode on the player (or default automatic default, MTP). MTP mode can be pretty weird; better to use MSC mode unless you have need to PSG for "protected" content or DRM files such as Rhapsody or audio in your library or Audible books. The small "crirically" message is a bug in Windows 7 (using MTP mode) that Microsoft did not consider important enough to fix.

• Pavilion dv4: battery does not charge even when it is plugged (load plugged says), but doesn't move 19%

  Hello hp Support Forums.

  Hardware specifications of the machine (if required):

  Laptop model: HP Pavilion dv4 Notebook PC
  OS: Windows 7 Home Premium x 64
  CPU: Intel (r) Core i5 - 3210M @ 2.50 GHz (4 processors)
  RAM: 8192 MB RAM (4096 MB x 2) DDR3
  Graphics card: Intel HD Graphics 4000 @ 1 696 MB
  Audio: IDT High Definition Audio 16-bit
  HARD drive: 750 GB SAMSUNG Spinpoint M8 ST750LM022 HN-M750MBB

  I own a laptop PC hp Pavilion dv4 laptop and this morning there was a sudden battery problem, I was playing Dota 2 and the Steam interface told me that the battery percentage was 12% (7 minutes from the end) then I moved and grabbed the chager, plugged into the outlet and plugged the charger in laptop a few seconds later the laptop turns off suddenly and won't restart, even if the charger is plugged there no light came from the load indicator.

  A few minutes later do research for similar problems, there was a solution to remove the battery and the charger then press and hold power for 30 seconds and 3-5 minutes then return the battery but it did nothing.

  After with some research, the indicator load on all of a sudden and when I start the laptop it was on 12 percent and billed not (there is no indicator that the charger is plugged) and turns off suddenly without warning.

  Later, with a bit of panic and thought, I removed the battery and the charge light lit, which allows me to boot up the laptop and when Windows starts, I plugged it to the battery and it says: 19% (plugged in, load) so I track for a bit, but it didn't move at all, even when I changed the power of High Performance for HP recommended settings , window 19% available (plugged in, load) but it's just, it, don't move or anything like that.

  EDIT: When I unplugged the charger to move my computer laptop and plugged in again, the indicator not lit and does not charge the battery thus forcing me to shut down or Hibernate, and remove the battery to the charge light.

  Your battery is quite likely to be having no longer life left.

  It is that if your laptop starts up without the battery, since the race, the battery test is not a viable option.

• My HP shows it is connected to the new router, but does not connect to the internet. How should I do?

  I have a HP G60 Notebook PC with Windows Vista Home Premium, it is about 4 years old. I recently got a new Cisco Linksys E1500 wireless router, which is connected to my home computer. My laptop shows that it is connected to the home network, but it does not connect to the internet. Other laptops in the House are able to connect to the network and to the internet. Mine seems to be the only one not working do not. Why it is not working? What should I do about it?

  I ran the network diagnostics. It is said "a problem with you network router or modem broadband could prevent an internet connection." I have disconnected these two and tried again. It did not work! I have also connected my laptop directly on the modem and it does not always connect to the internet. I tried to reset the network card. My IP settings are set to automatic.

  My internet connection was not a problem before last week (when I got a new router). What is the problem with my computer? Help, please!

  Hello:

  If you have an Atheros wireless adapter in your PC and you have not updated the driver, I recommend that you install it.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-99392-1&mode=3

  Wireless adapters Atheros with former pilots, dislikes the new Linksys routers.

  If you have an Atheros wireless card, and your wireless driver is more than 2 years, I am very confident that this will solve your connection problem.

  Paul

• BlackBerry BB Z30 Z30 connects to non-existent WiFi signal and does not accept the real

  I just changed wifi of our House 'Superfast' (100 Mb/s) because of problems with access around the House. I changed to 2G and the names of the signals of 5G from those used previously, xxx - 2 G and 5 G - xxx to xxx2 - 2 and xxx2 - 5G.

  However Z30, by listing the networks begins with

  Connected to xxx - 2 G, showing three bars and saying "Login to connect to the Internet." but I can not because it does not accept the password.

  Z30 then begins the list of available networks

  XXX2 - 5G, showing the four bars

  XXX2 - 2G, also four bars, saying "saved".

  at the bottom of the list is

  XXX - 2 G, three bars and saying: "selected."

  How do I remove a network as xxx - 2 G which doesn't exist or doesn't want to, because it blocks the ability to connect to one that exists and IS being sought?

  I can connect to xxx2 - 2G (new 'Saved' network), but after a while (maybe 10 minutes) the phone slides into the ghost...

  I would of course prefer actually to connect to xxx2 - 5 G - but this is not spared: whenever I have it try, ater entered the password (and getting a tick) I said - ' unable to add profile: another profile uses this SSID.» (WPS does not anyway I tried). Later: after having tried this ten or more times, sometimes xxx2 - 5G lists as saved (but usually does not), but is still inaccessible.

  How can I get Z30 to save a network / signal / profile - and use - it says is available and is looking?

  I'm an old man without a lot of hair left - and I'm pulling that very quickly...

  Cheers - Eric

  Eric, open your settings > Wifi.
  At the bottom of this screen type saved.
  Search for unwanted sources wifi saved old and press on & hold on this name to remove the pop up right.